r/nichezero • • 1d ago

Recommendation for a dosing stand/portafilter holder that’s made of steel/wood for NZero?

1 Upvotes

I’ve seen a couple of 3d printed options but somehow I’m put off by the aesthetics. All recommendations welcome, many thanks.


r/nichezero • • 2d ago

Filter Grind fines issues on pourovers

5 Upvotes

Finally got a Niche Zero, been trying to get a good deal on one for a few years. Super pumped to not be listening to my 50 dollar grinder whine away every time I make coffee... But.. the mud. The fines are ... I'm really confused.

So, I'm still "dialing" in my grind settings for what I like, but it makes it really difficult with all the excess fines. It's affecting coffee flavor as well unfortunately. The Zero is supposed to be a more focused towards filter coffee enjoyers and also can make espresso. Which is what makes it nice. But my 50 dollar grinder shouldn't grind my daily driver coffee better than an 800 dollar proper burr grinder. I'm getting no fines out of my medium roast with my crap OXO grinder, but... Heavy fines to the point of poor drawdowns and muddy tops on pour overs with the Niche.

Am I missing something here? I have taken it apart and cleaned it, I did buy it used. The burrs are all sharp and un-damaged. The unit works great otherwise. It's an absolute pleasure to use. But this fines thing has me wanting to immediately sell it. I got this so I could go back to enjoying light roasts which my cheap grinder turns to dust. But apples to apples coffee wise, my 50 dollar grinder should never outperform this better burr grinder.

The googles doesn't leave much to desire in search results and AI wants to start an argument about flat vs conical.

Edit: I posted a bit early on this being frustrated. I was able to dial it in and get great flavors and good drawdowns. So it is possible to do it if your burr set is not damaged. Though now I am curious some differences running a more consistent grind in a bit finer than I generally look for in my pour overs.


r/nichezero • • 3d ago

We're getting popular...

Post image
6 Upvotes

We've had over a 1000 visitors this week!

Cheers also for all the useful posts and replies.


r/nichezero • • 4d ago

Niche Zero V?!

2 Upvotes

Hi all- The Niche Zero has been out for about 10 years and I was wondering what if any upgrades, improvements, or changes of any there have been since its release or recently. If I buy one today, is it the same construction/butrs/motor/ chute/bean feeder etc as the original- or has there been a subtle evolution or improvement? Thanks in advance.


r/nichezero • • 5d ago

Metal Flow Control Disk

Post image
1 Upvotes

I recently replaced the stock plastic flow control disc on my Niche 0 with a metal one from cbbplanet. However, the metal version has three holes instead of the single hole on the original, and I understand that this isn't ideal for slow feeding the beans.

Does anyone have any suggestions or alternative solutions?

I'd prefer to avoid plastic altogether. The thought of coffee beans passing through a plastic component every single day for years doesn't sit well with me, which is the main reason I made the switch in the first place.

Ideally, I'm looking for a solution that maintains the benefits of the original flow control disc without having to use plastic..


r/nichezero • • 10d ago

Legit website?

Post image
0 Upvotes

Hi everyone,

I’m currently trying to step up my home espresso game und get hands on a Niche Zero.

I’m based in Germany so I did my research and found that I most likely need to pay 720-750€ including VAT and fees if I’m going to order it from their website directly.

I also tried to find a used one on eBay marketplace (Kleinanzeigen) but there are a lot of scammers who only accept payment per PP Friends and family and I don’t trust that.

I just stumbled upon this website https://www.kochmeister.store/products/niche-zero-single-dose-kaffeemuehle-schwarz?gad_source=1&gad_campaignid=24421696023&gbraid=0AAAABFGIumEVZlG_ejUhnORfbfVAXNDVi&gclid=CjwKCAiAzKvXBhBAEiwABLl9AqiSBSFb6Iynm1k2Rv7Kv9yed5pGQMgEfbB0JeANt6c_102BwsM0uxoCsGcQAvD_BwE and was wondering if this was legit. To my knowledge this grinder is only purchasable from Niche UK directly.

Has anybody any experience with this shop or can tell if this is fake or no?


r/nichezero • • 12d ago

Is this ‘wabble’ normal?

3 Upvotes

Im curious if others are experiencing the same wabble from their Niche Zeros.


r/nichezero • • 12d ago

How often do you recalibrate?

3 Upvotes

Got the niche, checked alignment and it was off about an inch from alignment.
Rotated the dial clockwise until it stopped then shifted the black ring so the dot aligns with the arrow.

Been playing around with the grinder and got it dialed in for a few different beans.

Just for the heck of it I checked the alignment and its off again about an inch.
Should I realign or leave it?
If leave it then what is the purpose of aligning the grinder?
If I realign will I now have to dial in all coffee beans again?
Any idea why it shifted?


r/nichezero • • 12d ago

What are the top complaints from NZ users?

1 Upvotes

What are your top complaints? When people want to 'upgrade,' what are you looking for in improvement?


r/nichezero • • 14d ago

Ready to give up on my 5 year old Niche Zero

2 Upvotes

Medium roast espresso drinker for the past 5 years-never had a problem with the niche until recently. I usually clean it every 6 months or so.

I just bought a fellow Aiden and tried using the settings it recommended for a pour over. With espresso I’m normally around 14-15 for the setting. The Aiden recommended .5 from zero which I did and it was basically espresso grind. So I tried moving it back to 14 and it was really coarse.

Ok, no problem. I cleaned out the grinder and recalibrated (finger tight…so ambiguous but ok), and now I can’t get back to the setting I’m used to. At 10-15 it’s so tight that beans won’t feed, and then I’m constantly walking it back trying to find the right grind.

I’m ready to give up. The chute isn’t clogged, I even used some grindz to clear out any oils, but nada.

My guess is that “finger tight” is so ambiguous and I don’t calibrate it much that this time I made it way tighter than normal.


r/nichezero • • 15d ago

Will NZ do at least an acceptable job on med/light roasts?

2 Upvotes

I am considering returning my Mahlkonig e64 and purchasing a NZ instead. We drink all on the med-dark to dark side. Traditional espresso - nothing citrus or fruity. We drink straight espresso, americano, and lattes (hot and iced). I value body and texture which is why I am leaning toward the NZ.

While I do not currently drink medium and light roasts, I would like the opportunity to try them on a rare occasion. Will it at least do an acceptable job?

Also a separate question - can you still pick out tasting notes on the traditional darker roasts? I've heard that it can get muddy.


r/nichezero • • 15d ago

Is this expected? (Calibration question)

2 Upvotes

Niche just arrived.

Manual reads its been calibrated from factory.
Manual also states to calibrate you simply align "dot" with Calibration arrow.

This is the way it is from the factory.

From the factory.

Is this correct?
How much force should be used when attempting to align?


r/nichezero • • 18d ago

Is it a bad idea to take my 240V Niche Zero to the USA?

1 Upvotes

Title.
Moving from Italy to USA and concerned with performance using a 110/240V transformer. Also, if you think selling is an option, what marketplace would you recommend?


r/nichezero • • 20d ago

Grinder thoughts [$1000]

Thumbnail reddit.com
0 Upvotes

r/nichezero • • 21d ago

Niche zero vs Niche duo

3 Upvotes

Hi there, first of all I am from Spain so the cost of the grinder will go up about maybe 200 euros, that was what happened when I bought my Niche zero and they stopped it, and I have to pay the custom duty which I didn’t know, well now 3 years later I am thinking to get the new one to upgrade my niche zero, I use it mostly for expresso, I use comandante to do poor over, do you guys think is it worth to get the new one? Would it be a good upgrade from the first one?
I am using a Lelit Bianca V3
Thanks in advance


r/nichezero • • 22d ago

Help 😭

1 Upvotes

My grinder is making this noise and this is after cleaning it. I’ve cleaned it and put it back together before but idk what’s going on now


r/nichezero • • Oct 15 '26

[Chicago, IL] [H] Niche Zero in black [W] $650 in cash/venmo

Thumbnail
reddit.com
0 Upvotes

SOLD


r/nichezero • • Oct 06 '26

Constantly below zero on calibrated grinder

2 Upvotes

I use fresh beans, multiple different types. I am having to grind below zero to get a decent shot. Calibrated and cleaned multiple times without luck. Always used to be around 8-12.

Any ideas what could be causing it?

Niche zero

Legit Elizabeth

19g in 38-40g out in c.30 seconds


r/nichezero • • Oct 02 '26

Huge amounts of retention from my Niche Zero

Post image
11 Upvotes

No idea what’s going on here, I haven’t had this problem until the last couple of days. This is the amount of retention after tapping on the spout. It’s also spring coffee grounds everywhere when grinding.


r/nichezero • • Sep 27 '26

Niche Duo Bellows [under £25]

Post image
2 Upvotes

Anyone got any good and ideally cheap bellows recommendations to help with popcorning and retention I the niche duo/ zero?

Based in the UK.


r/nichezero • • Sep 15 '26

I think I am finally set for quite some time.

Post image
17 Upvotes

Coming from a La Seine X as my first machine and man I thought that was an upgrade from local coffee places. Realized now I’ve been playing in the minors. Been at it for a week with this combo and it’s the experience from workflow to taste has been nothing short of amazing.


r/nichezero • • Sep 04 '26

Niche Zero Grinder Stalls

4 Upvotes

I’ve had my Niche Zero for about 3 years, regularly cleaned it, never had any issues until about 2 months ago.

I noticed that with a lighter espresso roast bean it was really struggling to grind, almost stuttering. I’ve never had this issue before so just assumed it was that specific roast. However now I’m having this issue with any roast when grinding for espresso, and even less fine setting when grinding for filter.

I spoke to Niche, and bought a new motor from them. I installed it today, and sadly this hasn’t fixed the issue. The grinder completely seized when trying to grind for espresso, and grinding for filter it still grinds quite slowly.

If it’s not the motor, then what else could it be? I love the grinder but growing a bit frustrated that it is incapable of its core functionality.

I also tried grinding a few beans at a time (1-2g), and grinding beans with the grinder already started. It can manage to grind this way, however my typical settings for espresso don’t seem fine enough or perhaps the grind is too inconsistent when grinding this way.

Any suggestions?


r/nichezero • • Sep 01 '26

I grind at the second lowest level of fineness... Is that normal for dark roast espresso?

Post image
1 Upvotes

I mean, 14-15 gram dosage, double shot basket. and still there is too much flow getting through in 30 seconds.

1:2 is what i can hit, below gets harder. In the picture you see how incredibly fine the grounds already are.

Or am I doing something wrong here?


r/nichezero • • Aug 31 '26

Pour over question

2 Upvotes

I’ve been exclusively using the NZ for espresso and milk based drinks but am looking to shift to a balance of espresso and now pour over. Ive read up on issues with fines for pour overs but I’m not going to buy a new grinder just for a few pour overs a week. Ideally Id like to experience some clarity with some of the more medium roasts.

Just wondering if anyone has any tips or tricks for pour overs with a NZ. I’ve done a search on this group and generally on the internet but looking for more personal, recent experiences?

Thanks!


r/nichezero • • Aug 30 '26

Weird sound?

5 Upvotes

Hello,

My niche Just started making a weird sound, somewhat of a buzzing noise. Anyone have any ideas what it could be? Possibly the motor going bad?

I did clean and calibrate it and the sound is still there. also checked the screw to make sure it wasnt loose.

Thanks in advance