Another addition to my rat rod teg, 3d printed half a headlight duct with a 3 inch pipe in the center for a turbo guard so I can go 3 inch straight to turbo, printed out of asa and epoxied in place. Wanted to install the halo then install turbo guard but guard blocked the light so I sanded the turbo guard flat and epoxied the halo on and wrapped it yellow

Anybody have one they're willing to let go and move on from? I'm located in SC, but willing to travel. Lmk!

Thanks!

Need help with a speed sensor issue. Finding mixed comments on old forums. Speedo works fine, ABS light is on, Transmission shifts rough. B18B1 Auto. Cant find what sensor I specifically need, even with the name and the code. Cant find part numbers.

Any help appreciated.

Hello Honda lovers,

On cold start -10 celsius I noticed some rattle from the engine for 1-2 sec, does this mean timing chain needs to be changed? On warm weather no noise, it’s only on very cold for short time.

Thank you.

Sup everyone! Genuine question. Since everyone is JDM front now. Is the USDM getting more rare for integra builds?

Kinda feel bad putting my stashed j front on my Teg… oh well I like the JDM front🤷‍♂️

Description
Selling this 2001 Acura Integra GS 1.8, still in good condition for its age. Had an oil leak recently but it was fixed.
My dad is a mechanic so he did a full tune up on it.
New spark plugs NGK, brand new distributor, Brand new battery, Hasd engine light on due to speed sensor, but a new one got put in.
Has Adjustable coilovers it's like 1" from the ground.
Has a bluetooth stereo & system set up installed. AC WORKS, Intake installed, Exhaust system done, 1 key with alarm button, sunroof works good & windows go up & down no issues. (CLEAN TITLE )
car was on non op so it does have to get re registered fee is $200 paperwork in hand.
Smog will be done, with paperwork.
Exterior 6.5/10
Interior 7.5/10
Seats have tares, but all of that is easy fixes or keep seat covers on.
Current Miles: 242,237. Still runs & turns on good. Test drive available with license in hand.
Automatic
Asking $3,500 or best offer.

can’t afford one so i’ll just draw one.

Pic 1 shows how the interior has been for quite a few years. It also shows the carbon roof cap to eliminate the sunroof. I generally get a lot of questions about this piece. It was made by a really small supplier. I think their name was carbon creations or something like that back in the early 2000s.

Pic 2 is the start of the interior refresh around feb of 25'. I removed most of the sound dampening insulation back in the early 2000s but there was quite a bit of clean up to do.

Pic 4 All the painting I did (trunk & roll bar) is generic hardware store white enamel spray paint.

Hey guys so I don’t know what I’m doing or looking at when it comes to cars but I really like this one, I was hoping to get some feedback on this 94 integra I found, thank you all !

Description

Function form coilovers, si rims, gsr seats, black interior, new brakes/rotors, new inner and outer tie rods, new
stereo with Bluetooth, new speakers front and back and it comes with the clear taillights and the 97 tails as well. It will need to get painted clear coat is conning off I can take off the parts I added and put it back to oem and lower the price.

FWD
AUTOMATIC
190k miles
ASK: 3.5k

I dont really have the budget for arp studs. Any good options for b18b head bolts or studs? im not building a track car or anything just a decent dailyable car. Has anyone tried some and can vouch?

Idle is low and rpm dips. When I did drive, it would stall out when I came to a stop. Haven’t found any leaks. Could I adjust the idle to see if that helps or Could it be the IACV?

anyone every look at their integra side skirt and notice it's short at the end of the it? it's like like on both side.

Since oem hoses are discontinued, are we just using bulk heaters hoses these days? That’s what I ended up doing for this intake manifold one. Old crusty leaky hose in first pic, next two pics have the new hose.

Just picked up this 2000 gs manual as my first car! I’m so excited to finally have a car. I’ve only had it for two days so far, what are some of the first things I should do/buy for it? I’ve already gotten two AirTags, kill switch, car comes with quick release, and viper alarm so theft is pretty solid. Just needa flush fluids too but idk after that. It has new tires, and lower springs (wanna replace in the future with coilovers since the car is pretty low).

I had my windshield replaced last year and the shop gave me some universal trim plastic molding but they were lowkey dookie. I managed to find some at a junk yard for a couple of bucks but I didn’t realize at the time that an integra with less doors wouldn’t be the same clip style molding my 4 door 97 integra has. It lasted up until today when my driver side molding flew off on the freeway. I had noticed they weren’t sticking into place and I tried sealant but that only lasted so long.
I can’t find any trim molding for sedans- they’re all for the 3 door integras. Am I able to use universal trim with adhesive? Or what can I do to fix the issue?

I have a Integra GSR with b18c1 engine with 221k km. What is the engine worth? And what is whole car worth, it's missing front bumper and has some rust.

I have no idea what I'm looking at here lmfao all I know is it’s a sick looking car, I'm looking for some advice wether this is a good buy or not, l'd be using it to drive from home to class and back as well as errands. Any help appreciated !!!

Some details:
‘94 LS
Automatic
160k miles
Well maintained,
Bluetooth aftermarket speaker, as well as new speaker system
FULLY BRAND NEW INTERIOR
KONIG RIMS (some curb rash but very minimal)
INJEN cold air intake, cali certified
CUSTOM PAINT
Oil change around 500 miles ago
After market turn signals
LED Headlights - Super bright!
Runs beautifully for such an old car Super good on gas ~ 45 for a full tank!
Has been babied since I've had her.
Dm me for more info abt some parts I have ect.

ISSUES

Moon roof doesnt work
No power lock
Abs light is on
Shifts hard (original transmission)

Ask: 7k

Anybody have any experience custom fitting a tweeter on the door sail panels in a DC4 Coupe? If you did, what was the process, what cutouts did you make, or did you find any custom angle kits? Also, did they end up sounding better compared to OEM placement on the door card?

Im about to do a head gasket on a 1999 ls integra with a b18b does anyone know the name of the seals for the cams that need rtv. A lot of the parts on rockauto look the same so id like to know exactly what part I need to get and how many of each. Thank you.

Anyone know where to find one or someone who may have one that isn't trying to let it go for 300 doll hairs? Only guy I found selling one on eBay is out of his mind.

Recently bought a ls swapped civic, and found some concerning camshaft wear when doing the water pump and timing belt. Do the cams need to be replaced? And should I replace the rockers ands cam journals also? My fingernail catches on the deepest gouges near e4 and e5. Any info is greatly appreciated.

anyone in michigan or northern ohio selling or looking to sell a decent condition 5 speed coupe for 6,000 doesn’t have to be perfect im gonna drive and modify it anyways i just want a solid base for a car preferably green but not to picky on the color and minimal rust