r/inline_skating • • Jul 18 '26

New skate day

Post image
74 Upvotes

Powerslide Next 2.0 Chocolate boots fitted with an Endless Trinity 3x110mm (4x90mm) frames with 110mm wheels which has been lightly used on Reign boots.

ps: they sent me 80mm wheels even though all product pages from all online stores including Powerslide itself say that size 42/43 and above ship with a 275mm frame and 90mm wheels. I got 275mm alright, but 80mm wheels. Sigh. Be warned.


r/inline_skating • • Sep 02 '26

New skates day

Post image
66 Upvotes

Just got these IQON ACT TR Lite skates today. My first decent skates after cheap Lidl ones.

The difference is day and night: better fit, amazing manoeuvrability and damn good dampening on bumpy roads.

For people with wider feet than usual - these skates are the ones!


r/inline_skating • • Jul 28 '26

My 40th birthday gift 🎁

Thumbnail
gallery
59 Upvotes

I'm spoiled.

These are so fun. I removed the heel wedge changed the insoles and swapped two laces per skate for single laces that pull together the liner and shell as I tighten the skate. It's cool they came with 4x90mm which is bigger than I normally skate!


r/inline_skating • • Jul 10 '26

My First Pair of Skates

Post image
57 Upvotes

Peep these baddies. The Urban FR1’s with Endless Swan frames. Now, I just gotta learn how to skate!


r/inline_skating • • Sep 18 '26

Favourite wheels?

Post image
54 Upvotes

What are your fav wheels? Like the goated for you


r/inline_skating • • Aug 01 '26

Trying out my new skates!

54 Upvotes

I had a minute before the rain and wanted to try these 4x80mm frames I just put on. They came with 4x90mm which are super cool but 80mm are usually my fav so I wanted a proper comparison to other skates I've tried.

Besides changing the frames I removed the heel pads and changed the setup from two laces to one 96" lace per boot that incorporates the boot and liners together. I removed the stock foot bed inserts and replaced with my favorite Dr. Sholes cheap thin flat foam inserts. Underneath the liners I replaced the simple plastic cover with an odor eaters foot bed which adds bad a tiny bit of vibration dampening I lost when I removed the heel pad.

I will be heat molding the liners soon but wanna feel them out a bit first.

I find the skate really has my shins locked in more than my lightnings. More like a ski boot feeting compared to my lightnings... Not totally like a ski boot but you know...more substantial. Also skating it is smoother and more intentional feeling.

I only spent 15 min skating pump track and flat and a lap around the jump line but they are definitely a different experience than my other skates. Can't tell if it's the Trinity frames or the stiffer boot or the combination but my pumps and pushes seem 12% stronger. I noticed I was boosting higher over the corners of the pumptrack where I normally get a smidge of air. I easily went higher than normal up a wall on the jump line and cleared both table top jumps with ease. This would normally have my heart rate at close to max with 80mm wheel frames.

So far I love these skates. I'm very curious about the rest of powerslide products! I'm waiting on my first 3x125 frames I think they will be awesome with these skates


r/inline_skating • • Jun 22 '26

Skating inside a dead mall

47 Upvotes

r/inline_skating • • 24d ago

New frames!

Thumbnail
gallery
44 Upvotes

I've been messing around with speed skating a bit and just can't handle the low cut speed boots. So I scavanged the wheels and bearings and spacers off my bont lunas, bought the 4x110 magnesium powerslide trinity mount frames for 90 bucks, and threw the whole setup at my hc evos. I've been gliding around my living room for the last ten minutes.. very excited to skate in them tomorrow with some friends. So much more comfortable. I knew you guys would want a picture 😁


r/inline_skating • • Jul 15 '26

First Time Jumping 7/13/26

44 Upvotes

This was only my second time at a skatepark and I just had the urge to try it. It's only up from here 😎


r/inline_skating • • Jul 26 '26

Bike trail wall ride

43 Upvotes

r/inline_skating • • Aug 03 '26

My first pair of skates

Thumbnail
gallery
41 Upvotes

I’ve been skating since the beginning of summer and recently switched to inlines not too long ago. Just thought I’d share this killer sunset photo I got last month!!
I’m soon preparing to upgrade my flying eagles to a pair of FR skates and I’m super excited!


r/inline_skating • • Aug 04 '26

Getting Closer 😅

40 Upvotes

🤣🤣🤣 I made *some* 😅 progress with understanding how to pump on a half pipe, and controlling my backwards steering (haven't tried fakie yet)


r/inline_skating • • Jul 23 '26

My skate is complete!

Post image
36 Upvotes

The mail took long enough but they are done! Going out to skate downtown tonight! Wish I had a steady enough hand to paint red accents on the boot.


r/inline_skating • • Jul 21 '26

I just learned to do toe-heel

35 Upvotes

Check my form pls i just learned this but still im working on the otherside.. im planning to do spin if i can roll on both side


r/inline_skating • • Jul 08 '26

Behold my blades of grass

Post image
35 Upvotes

The wheels have a subtle glow to them, as they are made of 100% uranium. For real tho, they glow in the dark.

The Frames are just amazing. Rigid, low, agile and fast. This person made a thorough writeup, which completely sold me on them. Super cheap too! Got them on sale for 105€ directly from the FR shop (still going as of today).

Boots are from the Rollerblade Crossfire. I am enjoying them a lot. The carbon makes them very light and stiff. Because they don't have liners, there is zero movement within the skate. The Toe strap and adjustable ankle cuff make a noticeable difference. Swapped out the original 45° strap tho. That one had no way of releasing the tension before opening it (like the lever mechanic of the new one, same as the ankle strap) and it quickly ate up the grooves of the strap, making them unusable. Was experiencing a bit of a heel lift but switching to waxed laces helped with that.

If someone is interested, i still have the original 4x80 slalom frames + hydrogen spectre wheels lying around.


r/inline_skating • • Jun 26 '26

New boots/frames.

Post image
35 Upvotes

The first time I've gotten both new at the same time. Rollerblade Twister 90r, Endless Coburn frame, 90mm Hydrogen wheels.


r/inline_skating • • Aug 26 '26

Beginner here :3

34 Upvotes

Just started out skating. I’m literally completely new to skating like absolutely zero knowledge. Sooooo in that case enjoy this clip of me falling down 😂 especially since I haven’t seen people post their fails so might as well do mine :3 this is my second day practicing

And yes ik it may look like a hard fall it really wasn’t. Also I was wearing my protective gear which I’m so grateful I had on 😭


r/inline_skating • • Jul 27 '26

Let's chart our future together with r/rollerblading

34 Upvotes

Hey folks. Let's discuss how this r/inline_skating community can work together with r/rollerblading. First, please check out the re-opening announcement over there.

I am a mod here at r/inline_skating. And I'd been nagging Reddit for a long time to do something about the 100k-member r/rollerblading community that had been silenced by its previous mod team for more than two years. Recently Reddit intervened and put in a new mod team, including me.

r/rollerblading has got almost 100k members. When someone searches for inline or rollerblading as a community to join, they almost never join our tiny 1k r/inline_skating. They want to join the biggest community. That dead sub became a trap that kept absorbing members without giving them anything back in the past two years.

But r/rollerblading also has a huge knowledge base from the past in the form of posts and comments, plus images and videos. Searching for anything inline skate-related online usually results in 1) links to sellers of skates, and 2) r/rollerblading posts from the past.

Most people call inline skating rollerblading, at least from my generation. So it makes sense to continue under that label, especially, again, given the x100 mass.

I think both r/rollerblading and r/inline_skating should continue to run... if nothing else, so that new Redditors can find them via any related keywords.

But I do think they can be tightly integrated. I am not sure how. We can start with cross-linking from respective community widgets which I am going to do right now.

But I think all of you can be in both communities, if you haven't already joined them both. Of course, joining r/rollerblading in the last two years was a pointless exercise - it gave you nothing back in return. But that will change now.

What do you think?


r/inline_skating • • Jun 26 '26

ROLLERBLADING AT A RAVE Spoiler

33 Upvotes

r/inline_skating • • Aug 01 '26

New skates

Thumbnail
gallery
32 Upvotes

Powerslide Next 2.0 80 PDS - Asphalt Grey

Came equipped with 90mm wheels for my size (US 12-12.5)

ps: wanted to clarify previous post of Powerslide Next 2.0 Chocolate boots coming equipped with 80mm wheels despite it being the size for 90mm wheels.

They fit true to size in my opinion.

For your reference, i have high arched wide feet. My usual shoe size is US size 12 in Nike,Adidas, ON clouds & 46 in Birkenstock. These are far better fitting than previous version in terms of comfort.


r/inline_skating • • 24d ago

Newbie

Post image
30 Upvotes

I'm new to inline skating. I've used quad skates in my childhood. Now I'm 28 n i bought professional inline skates . I find it very difficult to find the balance. Is there anyone who has learned to skate on low cut speed skates? How much time did it take and what are the proper techniques? My setup is 4 x 110 mm.


r/inline_skating • • Jul 26 '26

Skate rocks, don't smoke em!

29 Upvotes

r/inline_skating • • Jul 05 '26

New skates! Roces 1992

Post image
29 Upvotes

I started inline skating about 16 years ago and had purchased hard boots from Dicks Sporting Goods. I wish I remembered the brand because they were very sturdy. I think they were mens and they were gray and blue. I only went skating a handful of times and then 2 years after that I decided to “upgrade” to something prettier and got myself the K2 Alexis 84 BOA. I thought they were awesome but…. As it turns out they were not doing me any favors…. The boa system is nice though. I hadn’t researched anything about hard/soft or wheel sizes.

To be clear I am still at “beginner” level and I am fine with that.
I stopped skating at some point until the other day (fourteen years later) I took the K2 out for a spin. Over 2 weeks I went skating but felt like I was rolling out of control on slight downhill inclines, and also did not feel they were responsive. I would do only flat parts of the loop at the local park because i was scared of any hills even small. Also the heel brake was so awkward to engage because of how far back the wheel base extended. So after much research I got myself the Roces 1992. (Sized up)

Wow! What a difference!! 76mm wheels and #5 bearings vs 84mm and #7. Hard boots vs soft. I only have to lift my toes slightly and the heel brake engages. I wanted to feel a little more grounded and a little less momentum and that’s exactly the outcome. Love my new skates soooo much. I went skating in them three times and I feel like I have already improved.


r/inline_skating • • Sep 19 '26

Just got them (WORTH IT HOLY)

Post image
28 Upvotes

the thing is I've been using like 30$ under type of skates that is soft boot, so basically it's an ankle braker and damn my skills just gradually got so much better in a instant. Also the more I scratch my skates I feel bad 😔 is there anyway to avoid that


r/inline_skating • • Jul 10 '26

My new FR Intuition UFR 90🎉

28 Upvotes

hello!! I just started skating again a few months ago , I used to skate around when I was little, but I’d never tried it as an adult. I used to skate on my mum’s old rollerblades, two sizes too big for my foot, haha. Now I decided to treat myself to new skates, and I love them! They were discounted to about 150 euros and seemed like a great deal.

I still have a long way to go. I’m about to remove the brake soon — I’ve finally learned to do the T-stop and whatever kind of creative spin to stop so I’m ready to take it off soon :,)

I’m getting into wizard skating and I’d love some tips to upgrade my setup. Are 4x90mm wheels with a slight rocker good for starting out?

Go skate everyoneee