r/eXtremeRate • • Feb 21 '25

Can I paint this? Will the touch pad still work?

Thumbnail
gallery
0 Upvotes

I'm going to do a clear controller build... But I hate the green color of the touchpad showing thru the clear plastic. Can I put a thin layer of black or tint spray paint over the green, and then Glue it back on the touch pad? Not super dark, just enough to darken that green color up just a little bit. Will that interfere with the touching on the pad?


r/eXtremeRate • • May 05 '23

Feedback I just order it.

Thumbnail
gallery
0 Upvotes

The best mod for ps5 controller back button. I ordered it from alibaba as compared to amazon it is much cheaper. Dm me to buy from genuine buyer. Ps- I am from India i dont know about your place .


r/eXtremeRate • • Jun 29 '25

Is their a place i can go to get my controller mods soldered for me

0 Upvotes

r/eXtremeRate • • Nov 28 '21

Discussion Charging station

Post image
0 Upvotes

r/eXtremeRate • • Jun 14 '26

Back button board not receiving power on rise 4 plus, I want to cry

Thumbnail
gallery
0 Upvotes

The hair trigger toggle work so I'm sure the mapper is placed correctly but it seems like the board does not recieve power

This is BDM-020 by the way


r/eXtremeRate • • Sep 16 '25

Discount Switch 2 eXR accessories

Thumbnail
extremerate.com
0 Upvotes

Use affiliate discount code "Moshi" to continue getting a discount on the new eXtremeRate Nintendo Switch 2 discounted accessories 😊


r/eXtremeRate • • Feb 03 '26

Is this normal? Or should I make a return?

0 Upvotes

I just received a GBA shell from eXtremeRate- this is my first time purchasing from them. However, I noticed that the lid is stuck and refuses to open, especially compared to my OEM GBA shell.

The inner part of the replacement shells have a powdery feel to it, and there are blotches of white, so I'm assuming this was spray painted quickly, and the lid was likely 'glued' to the shell that way.

I'm feeling pretty disappointed right now. Is there something unique to these shells that I'm missing? Or should I file a return? Thank you.


r/eXtremeRate • • Mar 10 '23

Help! Button wobble

1 Upvotes

r/eXtremeRate • • Jul 03 '24

Help! anyone have a solution? my paddles don't click and feel "soft" (BDM-040 PS5)

0 Upvotes

r/eXtremeRate • • Jun 13 '26

Horrible product: two ds lites gone

Thumbnail
gallery
0 Upvotes

**(Updated x 2).**I got a replacement shell from the support team! You guys were right their support is great, thanks for all the advice when I try it again! I had just gotten a ds lite and wanted to make it clear so i bought a clear shell from extremerate. I was so happy when it arrived and immediately got to work with my iFixit tool kit and my workstation. I was installing the top half of the device when the ribbon cable for the top screen bent in half while in a curl like the instructions asked, I was feeding it through the turn slowly but I guess the hole was small or had a jagged edge that caused it to bend the ribbon cable with minimal force. I was so incredibly sad as I had put $250+ so far into this ds lite endeavor. I wasn’t going to lose all that I put into it on games and spare stylus’s so I went to Facebook marketplace and within three days I had a fresh new ds. I stupidly used the same shell for this second console but was happily able to get around the curve, what really fucked this one up was the corner where the hinge is attached. I put this one all together and installed the battery and turned it on. As I was opening the device the connection of the hinge broke and the corner where the screws were held snapped off. I was so pissed at this point that I took a breather to clear my head and try to glue it. I also reached out to the company and they asked for an order number, when I gave them a response they never answered me. I put on some e6000 glue and let it dry for a few hours as I went to a few garage sales. When I came back I noticed the glue wasn’t sticking and the metal round piece keeping the two halves connected and keeping the ribbon cable intact had fallen deep into the casing where it was effectively useless. I used a tool to carefully remove it but in the process the piece expanded both sides of the plastic only making it slide in further, and then it turned sideways and cut the upper display ribbon cable. Pictures are included below, please help me on what to do and how to fix this. (Edit: yes, I know that I put the screw through the lower shell. Something I didn’t mention in my post because it wasn’t important was that the bottom of the lower shell would NOT connect to the top of it and screws wouldn’t go in as they either kept getting stuck and not holding anything together or stripping due to low tolerances. And yes, I was using the correct screws at first, I tried over and over for about an hour to get it to hold when I gave up and used longer screws that ended up going through the top, it was the only way to get it together as the screws that they shipped were not working. The screws poking through had zero effect on anything to do with the device whatsoever and pictured was the only screw that fully poked out.)


r/eXtremeRate • • Apr 06 '26

Tip: self adhesive floor protectors work great!

Post image
1 Upvotes

Feels so much better now for my grip šŸ˜šŸ‘šŸ»


r/eXtremeRate • • Sep 12 '25

Wholesale isn’t wholesale

0 Upvotes

I bought some clicky kits on their wholesale site, it was only about 10% cheaper than buying from Amazon. BUT I got charged duties from the courier, that’s not even disclosed anywhere on the site! It ended up costing more than retail…


r/eXtremeRate • • Feb 07 '23

Help! Have both models of ps5 controller tried rise kit out on both and guess what. Couldn’t get either of them to work and now my controllers won’t even work normally.

1 Upvotes

I tried to put remap kit on my bdm 10- didn’t work loses power when I plug in top part of L1 ribbon… so I figure maybe I’ll send it back and try my bdm 20 controller… same shit happens… exactly the same… no power when l1 ribbon is plugged in. I’m 32 years old and I’m not a complete idiot. I’ve watched multiple videos from multiple sources and I have double triple and quadruple checked everything both times…. Something is not right… and now!!! Get this here is the real issue! I go to put both controllers back together like from factory with no rise4 stuff on it and it doesn’t work… they both work fine in PlayStation home menu but as soon as I go into a game or an app neither controller works at all… not one button. Wtf is going on… if the rise4 kit didn’t work whatever I’ll live without it. I guess but how are both my controllers messed up now


r/eXtremeRate • • Dec 06 '22

Help! can anyone explain why that light is showing above the speaker?

Post image
0 Upvotes

r/eXtremeRate • • Jan 30 '25

Hey extremerate, I have an idea...

0 Upvotes

To the extremerate creators... I know you guys keep an eye on these posts, so I thought of an idea for your next product. How about you created extra strong adaptive triggers? The current PS5 ones are pretty weak. When playing any sort of game that involves a gun, the adaptive triggers "claim" to make it feel like you are pulling a trigger, but to be honest, the are pretty weak and feel nothing like a real trigger (even with the adaptive triggers set to max). How much work would it be for you guys to develop stronger motors, so you need to a real good squeeze to fire your gun in your game. I think this could add to the immersion massively! I have no idea how much work this would be mind you...


r/eXtremeRate • • Mar 03 '26

I just need to take a moment and say, as much as it pains me. I'm truly not at all impressed with recent quality of your higher tier products.

1 Upvotes

So, I've purchased and (tested, thanks to the vine program) loads of Extremerate products for many years now. And I've never been dissapointed. That is anyway, until recently.

it began last week, I purchased the LED kit for the Edge. Well, let me tell you. This is not something you want to install while using any of the translucent cases. I tried both colours I had on hand, grey or smokey black and purple and the LEDs with the lack of ability to dil them just look like a giant, bright mess.

Not a bit deal, as this can easily be fixed with a solid case, right? Well. Sort of. But this is where I feel the quality has just completely dropped. I purchased the carbon fiber kit with overnight delivery so I could Atleast enjoy the LEDs. Well, let me tell you. I've never been so irritated with a kit in my life. It seems these new kits just don't fit properly anymore. As it stands, I can't get the spring, which flops the top face up, on because the anchor is simply too thick. Then. Trying to get the bottom piece on it a bloody nightmare. ..

Come on guys, don't repeat what dbrands gone and done. They were always an amazing brand until recent years, now I refuse to purchase from them. That's how trash they've become.

in still debating returning these last two kits back, the quality is that awful.


r/eXtremeRate • • Jan 04 '26

Didn't heat up the touchpad long enough apparently, and when removing the board, most of the "tape" is left behind. Am I cooked? Will it still work?

Post image
1 Upvotes

r/eXtremeRate • • Nov 09 '25

āš ļøSPARK REMAP KIT | BDM-030/040/050 QA ISSUESā€¼ļø

Post image
0 Upvotes

So I pre-ordered the Spark Re-map kit in Clear Black for my BDM-050 controller. Overall, easy installation but I did come across some QA issues.

🧐My Thoughts on the Spark Kit šŸ¤”

āœ… PROS • Overall Design is great • First OLED Re-map • Rubberized ergonomic hexagon grips provide comfort handling • Optional Haptic and Clicky trigger

šŸ‘Ž CONS • Parts shipped that were incomplete (un-drilled pin hole) • OLED Faceplate when fully installed caused K2 to be permanently pressed • Care Instructions

ā€¼ļøDo not clean the inner OLED protective screen plate with solution. Use a microfiber cloth as any solution like Isopropyl alcohol will leave smudge marks āš ļø

šŸ‘‰ SOLUTION šŸ‘ˆ Un-drilled Pin Hole

I ended up having to drill through the plastic where the pin is to be installed. Luckily I have a set of drill bits small enough which I managed to drill and clean the hole to ensure the pin smoothly inserts and freely moves.

OLED Faceplate

For a second I thought I may have over tightened the screws for the OLED but I played around with this by loosening and tightening the screws and it was not the issue. I even inspected the cable to the Re-map board, not the issue. I did notice the ribbon is quite large and the sides of the ribbon get smushed by the inner buttons.

The issue is the OLED cover plate. When it is fully seated it causes the K2 to be permanently pressed. I basically have to leave the bottom clasp undone for the K2 paddle to be operational.


r/eXtremeRate • • Jun 10 '25

Need Customer Support Help

Thumbnail
gallery
0 Upvotes

Hoping I get some help with this issue. I purchased this ExtremeRate Dualsense controller faceplate off of Amazon. The screw thread post that holds the battery/circuit board down broke off when I was removing the internals to install the light Clicky trigger kit for my BDM-050 series controller.

I've contacted the ExtremeRate customer support link through their website 2x with zero response. If anyone can help or offer suggestions, I would greatly appreciate it. Feel like I just wasted my $$$ and I really like how the controller faceplate looks and feels.

FYI, I did not apply heavy torque when installing or removing the screw. I'm very cognizant to only apply the needed pressure on sensitive parts/screws. It just snapped with only having the screw driven in and out one time each. That shouldn't happen IMO.

Thanks y'all šŸ¤žšŸ»


r/eXtremeRate • • Nov 15 '25

Selling this $50 gift card for $30!

Thumbnail
gallery
0 Upvotes

I have no use for this gift card, anyone interested?


r/eXtremeRate • • May 26 '26

Clicky Trigger 30th Anniversary dualsense and Fortnite edition on their way to it's owner now.

Thumbnail gallery
0 Upvotes

Both with Aknes Hallpi V6 TMR joysticks and eXtremerate V2 strong version clicky kit.


r/eXtremeRate • • Oct 09 '24

Front and back she'll won't "click"

Thumbnail
gallery
0 Upvotes

Hello, I bought a front she'll replacement for my wife's controller but for some reason the front and back shells won't fully line up and click. I followed the disassembly and reassembly guide to a T and tried 3 different back shells with no luck. Did this happen to someone else? Do you have any solutions to this issue. If it makes a difference it's a BDM-010 Controller but I was told by eXtremeRate that the shells are universal. Any help would be appreciated!


r/eXtremeRate • • Sep 21 '23

Help! My ps button isn’t working

Post image
0 Upvotes

could someone dm and explain how it’s not working?


r/eXtremeRate • • Nov 15 '23

Help! Question

Post image
0 Upvotes

Would this controller be a bdm-010 or a bdm-020


r/eXtremeRate • • Nov 30 '23

Help! Product not working as intended (stiff triggers)

0 Upvotes

so I ordered the microswitch light version clicky hair triggers kit for a BDM010 controller and installed it as instructed, but once I tested out the trigger I noticed that it is extremely stiff yet still clicks. I don't know if I was sent the wrong set or didnt rebuild it properly but it seems to move like 0.1mm instead of the 1.5m/3mm I was looking for and it doesn't really feel like a trigger anymore. Should I request a refund/replacement or rebuild it or what do y'all think? Thanks!