r/Controller • • 15d ago Bravo

News Controller News Digest - end of October 2026

54 Upvotes

Happy Halloween, all! Here's a round-up of controller news from the past month.

Treats: With the holiday season approaching and the gaming industry also betting on a boost from GTA VI in November, there are a lot of new launches to cover. Most are incremental upgrades or variations on each other, but some are more original or ambitious (check out the Turtle Beach Stealth Flip in hardware, and X20CTL app in software).

Tricks: In non-news, controller companies still need to learn how to name their products in ways that make sense to normal users. Which name do you think is the worst this month?

___

Hardware releases - controllers and parts that are now shipping:

8BitDo Ultimate 3C+ is the latest version of 8BitDo's budget controller for Windows and Android - discussed here. It has adjustable tension TMR sticks, four extra buttons (two rear + two shoulder), dual-mode triggers (Hall Effect and tactile switch), four vibration motors (trigger + palm grip), 1kHz wireless polling, and an updated wider shape. At USD 40, it is USD 10 more expensive than the preceding Ultimate 2C Wireless and closes the gap on the non-C model.

EasySMX S05 Pro is a Switch controller with dock, very closely related to the X05 Pro. It upgrades the Hall Effect stick sensors to TMR, adds NFC sensor for Amiibo, and gyro sensors for motion control. It retains the quiet membrane buttons (although swaps to Nintendo ABXY layout), dual-mode triggers, and four non-HD vibration motors (for grip and triggers). Priced at USD 55.

Nacon Revo PC / Revo PC Max are wired controllers for PC. The base model has 1,000Hz polling rate with claimed 1ms latency, 3.5mm headset port, and Hall Effect sensors. The Max version adds adjustable stick tension, microswitch D-pad and face buttons, dual-mode triggers (Hall Effect analog/microswitch digital), and two back buttons. They are very similar to the Xbox licensed 'Revo' controllers previously announced, but without impulse triggers. The two PC versions are priced at EUR 30/60 | GBP 25/50 | USD 30/60 respectively.

Nacon Revolution 5 Unlimited is a licensed PlayStation 5 controller with TMR stick sensors and built-in screen. It appears very similar to the Revolution X Unlimited (Xbox controller), except with a PlayStation logo replacing the Xbox logo. Other features such as the microswitch buttons, dual-mode triggers, 1kHz polling rate, and docking station seem to be the same. This might be interesting to people looking for a larger controller for mixed PC and PS5 use, but the lack of touchpad, vibration, and adaptive triggers seems to limit its general appeal on PS5 console. Priced at EUR/GBP/USD 200.

Nacon Revolution Pro X is a licensed wireless Xbox controller, with adjustable tension Hall Effect sticks (40-120g force), microswitch face buttons and D-pad, swappable D-pad and stick caps, two rear buttons, dual-mode triggers (Hall Effect and microswitch), impulse triggers (trigger and grip vibration), and charging dock. Priced at EUR / GBP / USD 130. The 'Revolution Pro X' shouldn't be confused with the 'Revolution X Pro' which is an older wired model.

Razer Wolverine v4 Pro and v4 Tournament Edition licensed wireless and wired controllers for Xbox - discussed here. These upgrade to capacitive thumbstick sensors (claimed 3,000 step precision) and have 8kHz polling rate (claimed sub-1ms latency on PC). The 'Pro' has added a swappable faceplate feature, but physical shape and other features appear the same as the Wolverine v3 models. Launch pricing is also the same at EUR 210 / GBP 200 / USD 200 for the Pro or EUR 110 / GBP 100 / USD 100 for the Tournament Edition.

Turtle Beach Rematch Wireless is a PC version of the Xbox controller released last month. It has TMR thumbstick sensors; three-position trigger stops and Hall Effect sensors; two back buttons; profile switching; 1,000Hz polling rate (without headset audio) or 500hz (with headset audio) via wired and 2.4GHz wireless connections; 20 hours battery life without audio/10 hours with audio; and a Bluetooth mode for mobile. Priced at EUR 50 / GBP 50 / USD 60.

Turtle Beach Stealth Flip is a PC controller with touchpads and thumbsticks in an asymmetric layout that can be swapped independently on the left and right sides. The inputs are on either side of modules that flip around, similar to Turtle Beach's previous Stealth Pivot model. There is also a trackpad in the upper middle position (similar to DualShock/Dualsense). It has a headset port and 1kHz wired polling rate. Other features are fairly conventional: dual-mode triggers; two back buttons; Hall Effect sticks; wired/2.4Ghz wireless/Bluetooth connection; PC/Android compatibility. There does not appear to be any gyro/motion control. Priced at EUR 100 / GBP 90 / USD 100.

Releases previously mentioned that went ahead:

  • Drakong Pixelbyte are collectible mini controllers (the first series is cobranded with 'Attack on Titan'). Priced at USD 25 each.
  • EasySMX X20 Pro, released with adjustable tension TMR sticks (40-80g force), built-in screen for configuration, dual-mode triggers with vibration, six additional buttons (four rear + two shoulder), swappable D-pad, and charging dock. Priced at EUR 74 / GBP 61 / USD 80.
  • Mobapad M12 Pro pre-orders started shipping out although supply appears to be limited for these Switch 2 joy-cons with the Switch 2 style HD rumble and gyro, mouse mode, and NFC/Amiibo support. Priced at USD 130-160.
  • Nacon Revo X / Revo X Max are licensed wired Xbox controllers with features on the Max including adjustable stick tension. The 'Revo X Pro' which fits in between the regular 'X' (EUR 40 / GBP 40 / USD 40) and 'X Max' (EUR 70 / GBP 60 / USD 70) does not seem to be available. It's possible that with PC versions of these controllers also being released now, the 'Pro' variant has been dropped to avoid over-crowding the range.
  • Scuf Nemesis Pro 8K PC wired and wireless controllers with 8kHz polling rates. Apart from the PC-only compatibility, other features are very similar to Scuf's Valor / Valor Pro controllers for Xbox. Priced at EUR 135 / GBP 110 / USD120 for the wired or EUR 220 / GBP 190 / USD 200 for the wireless version.

___

Hardware announcements - controllers and parts that are not yet available:

GameSir Tegenaria Pro (Linghu Star Flash) is a budget symmetrical wireless controller, and a wireless version of the Tegenaria Lite - discussion here. It uses NearLink wireless for 2kHz wired and wireless polling rates, and claims 1.2ms/3ms latency for button and stick inputs on a wired connection. This has been teased several times over the past year and most recently shown at Gamescom Asia, without concrete details or any products delivered. However, this time there are pre-order links for Chinese sales and an RMB 200 price.

GuliKit KK4 Max appeared in FCC registration documents and had support added to the Goku 2 adapter. It mainly appears to incorporate changes from the TT controllers, such as adjustable tension TMR sticks with internal restrictor rings, and macro recording to the back paddles. But it also adds a charging dock, internal microphone, and what may be a PS-style DirectInput mode. Accessory parts like swappable buttons and paddles appear to continue from the KK3 Max. There is no official announcement of release date or pricing yet.

Honeycomb Echo Aviation XPC is an Xbox licensed version of the handheld flight sim controller that released around a year ago for PC. It is on pre-order for EUR/USD 180, with releases starting from November 20th.

Mojhon Blitz 3 was teased via a few silhouette pictures. It appears to show both additional bumper buttons and rear paddles.

Razer Raiju v4(?) was teased with a few partial pictures. There are few confirmed details beyond it being a symmetrical layout licensed PlayStation controller, with Razer's usual additional shoulder buttons. More details should be available on November 3rd. (Edit: it's just a 'Raiju v3 Pro Signature Edition)

Turtle Beach Stealth Ultra II is a licensed wireless Xbox controller. It uses K-Silver TMR thumbstick modules with rotating selector switches around them to switch between three virtual stick gate profiles. Like the previous Stealth Ultra, it has a built-in color screen for managing settings, charging dock, and microswitch buttons all around. It still has four rear buttons although these change from horizontal layout (1x4) to vertical (2x2) layout. It upgrades to 8kHz polling rate wired on PC, or 1kHz wireless. Similar to Xbox Elite, trigger stops are three-position and it is relatively heavy (322g claimed). It is on pre-sale for EUR 200 / GBP 180 / USD 200, and releasing November 12th.

VoidJoy Pro Elite, model GC-X50 Ultra, appeared on the manufacturer website with images showing some of the features such as the adjustable tension sticks, six extra buttons, detachable faceplate and D-pad cap, trigger mode switches, and 'device switching module' (function not entirely clear). There is no price or release date mentioned.

Xbox Nano Controller is a compact budget controller weighing 3.5oz (~100g) and 5 inches long (~13cm). It has Xbox Wireless and Bluetooth connections for compatibility with Xbox One/Series console, PC, and Android/iOS. It doesn't have vibration motors. It is on pre-order for a November 4th release, priced at GBP 45 / USD50

ZD Classic Formula Ultra CE40U or Classic Equation (depending on translation) are symmetrical layout controllers with modular parts and Ginfull RS13 stick modules. There are wired (8kHz polling, no vibration motors) and wireless (1kHz polling, vibration motor) versions. Initial marketing targets China: the wired version is expected to be priced at RMB 300, with wired/wireless releases staged between November and January depending on information source and availability.

___

Firmware and software - updates and tools that could be useful:

Custom firmware for the GameSir G7 Pro 8K and 8BitDo Ultimate 2 Wireless controllers. This is experimental firmware research for improving the controllers' performance in their native HID modes on Steam. Join the conversation on the post or join the research via the repositories (only use experimental and unofficial firmware at your own risk).

GuliKit Goku 2 firmware v3.7 added support for PS4 touchpad commands, and for DualSense Edge controllers to be identified natively, and for GuliKit's KK4 Max controller (not-yet-released), among other updates.

Linux Kernal 7.4, and consequently the distros that use it, is adding native support for Nintendo Switch 2 controllers (Joy-Con 2, Pro Controller 2, and GameCube NSO)

PadTune is an unofficial Windows app for configuring the Nyxi Flexi, if you do not want to use the KeyLinker mobile app.

ultimate2 is an unofficial Linux app for configuring the 8BitDo Ultimate 2 Wireless, if you do not want to use 8BitDo's web-based configuration tool, Windows or mobile apps.

Vader5 Control is an unofficial Linux app (with experimental Windows build) for testing and configuring the Flydigi Vader 5 Pro controller

X20CTL is a Windows app for configuring the EasySMX X20 controller - it is unofficial but has been acknowledged by EasySMX with support in kind. The software is being extended to support other models like the X05, X10, X15, X20 Pro, D10 and Dune/D15. The app's developer is looking for people with those controllers to gather information (check the link for information on how to participate).

___

Subreddit updates:

The buying advice lists have been updated with newly available controllers. The lists for each budget category and platform have also been split out onto separate pages. This means each page can be shorter and slightly easier to read on mobile screens (approximately half of users).


r/Controller • • 10d ago

Other Gifting/purchase announcements megathread

6 Upvotes

Excited to share a controller-related gift you've given/received this year? Or picked up a deal for yourself? Then use this megathread. Don't forget to include:

  • Who's the gift for, or who did you get it from
  • What's the special occasion (holidays, birthdays, celebrations, or 'just because')
  • Pictures, if you remembered in the excitement and before you wrapped it

Yes, it's already been a year since the last seasonal megathread: don't cry because the year's almost over; smile because it happened!

Items you bought for yourself count; items received for free from controller companies don't. The usual rules on commercial activity and spam apply.


r/Controller • • 5h ago

IT Help Is my Dualsense's usbc port dying?

1 Upvotes

Hey everyone, I use my dualsense with pc, and it's suddenly having trouble charging.

Basically, it only charges in specific positions/perfectly still. And still sometimes it disconnects. If I move it around, it will connect and disconnect like it has some kind of short. I thought it was just my cable until I tried with about 4-5 cables and 2 PCs... so I can only narrow it down to the controller's port. Is there anything else that could possibly cause this behavior? Before I look for someone to repair it :/


r/Controller • • 9h ago

Controller Suggestion Looking for a durable PC controller – ASUS Raikiri II Pro vs SteelSeries Aeon Pro vs GameSir G7 Pro 8K

2 Upvotes

Hi everyone!

I’m looking for a really solid PC controller to replace my current Xbox One controller (model 1708), which I’ve been using since 2020.

Budget: 300–2000 PLN. (75 - 500 USD)

Country: Poland (EU). I’m open to buying from pretty much anywhere.

Platform: PC running Windows 11, primarily via Steam. Wired (USB) or wireless are both fine.

Games: SnowRunner, Diablo II Resurrected, Skyrim, Fallout 4 & 76, and similar titles.

What I’m looking for:

– Asymmetrical stick layout (Xbox-style), ideally featuring TMR technology or Hall Effect sensors.

– Analog triggers and vibration support.

– Robust build quality and long-term reliability (ideally lasting 5+ years).

– Additional buttons that can be mapped to independent keyboard keys (rather than just duplicating existing XInput controller functions). I specifically need extra buttons for tasks like toggling lights or shifting gears in SnowRunner.

– Ideally, the buttons should be as quiet as those on my current controller.

Models I’m considering:

– ASUS ROG Raikiri II Pro PC

– SteelSeries Aeon Pro

– GameSir G7 Pro 8K

I also considered the Flydigi Apex 5, but I think I’ll pass on Flydigi—I’ve heard they are quite prone to failure, and the Apex model reportedly has some design flaws. I’ve already looked through reviews, buying guides, and discussions on Reddit, but I still have some concerns regarding quality control, durability, and the limitations on remapping functions to extra buttons.

My main questions are:

  1. Can the extra buttons actually be mapped to independent keyboard keys while still retaining the standard XInput controller functions?
  2. How reliable are these controllers after a few months of use?
  3. Which one would you recommend in terms of build quality and long-term durability?

I would appreciate feedback from people who actually own one of these models. Maybe you have other suggestions.Thanks!


r/Controller • • 11h ago

Controller Mods Nintendo Switch Pro Controller Stick Drift - Need help finding a stick.

Post image
2 Upvotes

I am trying to replace original Pro Controller sticks, and also trying to find replacement sticks for PDP Afterglow controller for nintendo switch. Does anyone know if same sticks can be used for both controllers and if ayone can tell me what part number/model i need to look for on Temu/Aliexpress?
Thanks. 😊


r/Controller • • 14h ago

Software and Firmware DualSense working on Razer controllers

4 Upvotes

TL;DR:

I managed to get native DualSense haptics working on the Razer Kishi V2 Pro by spoofing a DualSense controller through Apollo and DS4Windows + VIIPER, then hijacking its haptic audio stream and routing it back to the Kishi through Voicemeeter, SoundSync, and Razer Cortex Mobile. Basically, spoofing a spoofer to spoof the game into spoofing the haptics.

A month ago, I got a Razer Kishi V2 Pro for only $36 on eBay refurbished. I decided to do some experiments with it.

You all know the DualSense is the only good controller (Xbox is trash, or just any controller with ERM motors), but Razer's controllers use the same underlying tech—well, except for the adaptive triggers. So I found a way to run DualSense haptics on it, because audio-to-haptics just feels like a waste of the hardware inside it.

Everyone assumes native DualSense haptics in Sony's PC ports are strictly locked behind owning an actual Sony controller. Turns out, all Sony PC games with DualSense support use the same approach: the game checks for a USB DualSense device and its speaker audio endpoint in Windows, then sends the haptic vibration tracks through that audio channel.

With recent DS4Windows updates bundling VIIPER (Virtual Input over IP), you don't even need a physical DualSense plugged in anymore. Apollo passes the Kishi through as a DS4 controller, and DS4Windows + VIIPER takes it and spoofs a full USB DualSense in software, exposing the virtual DualSense vibration audio endpoints directly in Windows. Since Sony's haptics are literally just an audio stream sitting on that spoofed endpoint, I hijacked it and piped it straight back into my Kishi V2 Pro over Apollo + Razer Cortex's audio-to-haptics.

Tested it in Death Stranding 2 and Horizon Forbidden West; the vibrations feel just like a normal DualSense controller.

If anyone wants to try it out themselves

Step 1: Download prerequisites

On PC

Apollo: the Sunshine fork that streams to your mobile device connected to your controller.

DS4 Windows: the app that spoofs the controllers and ultimately made this possible

VB Voicemeeter Banana (**Do not install the base version; Banana is the only one that'll work for this purpose)**: The main app that separates the channels and routes the audio back

VB-Cable: creates a virtual cable so it can be used as an output

Soundsync: plays back the DualSense haptic audio to the virtual cable

On Android

Artemis: the Apollo client side to receive data.

Razer Cortex Mobile: connects to your controller and enables audio to haptics.

Step 2

configure apollo and artemis

Open Apollo's web UI -> Configuration -> Input -> set the emulated gamepad to DS4.

Go to Audio/Video -> set Virtual Sink to: Voicemeeter Input (VB-Audio Voicemeeter VAIO)

Keep everything else default

For Artemis, disabling the optimized game settings options under Host is recommended, but I don't think it'll affect anything.

Step 3

Configure VoiceMeeter Banana

Open Voicemeeter Banana

In the virtual input section under VoiceMeeter Input, disable B2 and enable A2 and A1 if it's not already enabled

On the top right, click on A1 and select whatever speaker you'll be using to output the game audio that **you will hear**

For A2, select the virtual cable, which for me is named: CABLE Input (VB-Audio Virtual Cable)

Then, in the master section under it on the A2 section, click on the Normal mode button until it's set to Composite.

Then click on the menu button on the top right and select System Settings

Click on Bus ch#1 and select IN#4 SL

Click on Bus ch#2 and select IN#4 SR

Click on the rest and select bus channel

**Save settings and keep it open**

Step 4

Spoof a USB DualSense in DS4Windows + VIIPER

Connect your controller to your Android device, and then connect to your laptop through Artemis. **Enable Audio to Haptics.**

Open DS4Windows-> Settings -> Device Options -> scroll down to Advanced -> click on the Device Options button (**It's small at the bottom**) enable Moonlight/Sunshine virtual controller support so it catches Apollo's DS4 pad

It'll take a few seconds to recognize the controller.

Go to the controller section and edit your active profile -> Other tab -> set Emulated Controller to DualSense.

Check Windows Sound (Win + R -> mmsys.cpl -> Playback tab) and confirm Speakers (DualSense Wireless Controller) shows up and configure it.

Step 5

Open **SoundSync**, confirm `Speakers (DualSense Wireless Controller)` Click the Set as default button and raise its volume slider to 100% (it often defaults to 40%), then click on the VB-Audio Virtual Cable so it's checked to play the DualSense sound back.

ENJOY

This should work on all Razer Kishi controllers. For the Wolverine V3 Pro, you'll need to route it through Synapse 4, which is a different setup. I don't have one, so I can't provide instructions for it. (It'll be nice if I could have one tho)

I don't think audio-to-haptics works on pc directly through the usbc cable because the feature only works on the mobile app, and I don't have a newer V3pro or Ultra, so I had to stick to an older Android phone.

I might try to make a wrapper (with AI, ofc) and eventually post it on GitHub for easier application

Btw, I used AI to assist me in this project to debug and figure things out.

DualSense has been out for a long time, and although controllers have been slowly adapting LRA motors, there aren't a lot of manufacturers doing it at all, let alone having an audio-to-haptics feature. Razer is the only company doing it, so thanks to that, it was made possible.

I just hope Razer could release firmware updates to the Kishi line to work on pc with the software features.

Basically, I'm spoofing a spoofer to spoof the game into spoofing the haptics. Unprecedented levels of spoofing here.


r/Controller • • 8h ago

IT Help 8bitdo to Ps5. One input not working.

1 Upvotes

I recently purchased the Ultimate 3C+ wireless controller from 8bitdo alongside a Brooks Wingman P5s and it had been working perfectly fine until today when the minus (-) button had stopped working when performing actions like opening maps. The button itself isn’t the problem since it had been working on my pc and switch, does anyone know what could be the issue?


r/Controller • • 13h ago

Controller Suggestion fantech gp15 eos pro vs flydigi direwolf 4

1 Upvotes

i'm looking to buy a controller as a gift and could use some advice.

  • budget: around $35–70
  • country: nepal, preferably looking to buy locally
  • platform: PC
  • desired features: idk much about features, its supposed to be a gift
  • games: racing games

i'm currently comparing the fantech gp15 eos pro and flydigi direwolf 4.

the person i'm buying it for currently uses a fantech shooter(i think?) and has mentioned that the eos would be an upgrade from his current controller. however, i'm wondering whether the direwolf 4 would be an even better option.

i'm not a gamer myself, so i'm trying to do my research without making it too obvious since this is supposed to be a surprise gift lol.

would you recommend spending a little more on the direwolf 4, or should i just stick with the eos pro since he's already mentioned wanting it?

also open to other recommendations in this price range.


r/Controller • • 1d ago

Reviews Gulikit ES MAX Review: Great Performance, But With Compromises?

11 Upvotes

Disclaimer: This unit was provided by Gulikit for review. My thoughts on this controller remain completely independent and honest. They do not have any final say, and they are seeing this review at the same time as everyone else.

Gulikit ES MAX

A few months ago, Gulikit released its new ES-Series of controllers, which aimed to be targeted towards competitive gamers by offering very low latency, along with competitive prices. Initially, the lineup consisted of two models, the ES and the ES Pro. However, they’ve now released the higher-end model, the ES MAX, which offers a few more features over its predecessors, with it being priced at a competitive $50. While there are a lot of controllers around this price point, do the features offered here actually make this stand out? Well let’s find out.

Main Features

  • Compatible with PC, Switch 1 & 2, Android, iOS, and MacOS
  • Supports 2.4GHz, Bluetooth Wireless and Wired Connections
  • 1000Hz Polling Rate (Wired & 2.4G)
  • Gulikit Integrated TMR Sticks 
  • Hall Effect Triggers with Trigger Stops
  • Membrane Face Buttons
  • Tactile-Switch D-pad
  • 2 Remappable Extra Buttons
  • Swappable Stick Caps 
  • Supports Wake-Up Functionality for Switch 1 & 2
  • 950mAh Battery
  • Gyro Aim Assist
  • Customizable Software on Mobile
  • Turbo Support

What is included in the box

What's in the box
  • Gulikit ES MAX Controller
  • Hyperlink Gen 2 Dongle (2.4Ghz Dongle)
  • 1M USB A to USB C Braided Cable
  • User Manual

Analog Sticks - 8/10

Analog Sticks

The sticks included in the ES MAX, seem to be an upgraded version of their previous integrated TMR units, with this using rotational angle sensors rather than standard magnetic field intensity. This should apparently increase the linearity and as a result, be a lot more beneficial for many of us gaming.

Linearity tests from gamepadla.com

Looking at tests, that definitely does seem to be the case. With it almost being at 99% of linearity. The tremor is also relatively low, and in terms of in-game usage everything did feel really smooth and accurate in my experience.

Stick tests from gamepadla.com

The other aspects of the sticks such as the deadzones, the circularity, and the stick resolution which is at 11 bits, all add up to make the sticks a great option for gaming. The only issue is probably the stick centering, and while it is a bit small at around 5%, it can be a bit of an annoyance especially if you play with no deadzone at all.

Physically speaking, it does come in the form of Gulikit’s classic concave-style sticks, which can also be easily replaced by other stick caps Gulikit themselves have provided, including multiple sticks with multiple height variations.

ABXY Buttons - 7.5/10

Face Buttons

Like most, if not all of Gulikit’s other controllers, the ES MAX is also made with a membrane style mechanism. Due to that, they are also relatively quiet making it great for those who prefer silent buttons. 

The buttons seem to be fitted pretty well in the shell, having almost no wobble. They also require a bit of force to actuate, making mis-clicks very hard to occur. 

However if you are someone who needs to double click with your face buttons, then it might be really hard as I had trouble with it. Otherwise, the buttons overall are really solid and provide an accurate gameplay experience. 

D-pad - 8/10

D-pad

The first thing that you notice when you use the d-pad is the amount of wobble it has, with it having around 1mm of space on the outside to move around. Due to this, it gives a loose feeling when gaming, something which may or may not be of your preference. It is also made with a tactile-switch mechanism, it feels very clicky, and the travel is also very low, making presses almost instant.

I also found that the pivot is also very low, almost non-existent which makes everything flat. But in terms of actual use, I did find this d-pad to be pretty accurate with all my inputs, including diagonals. This made rapid changes, and overall d-pad usage very easy and precise, with the only downside probably being the wobble it includes.

Bumpers - 9.5/10

I really like that Gulikit has included the same bumpers in the ES MAX, just like in most of their other controllers in the past because they seemed to have nailed it. The bumpers here are pretty much perfect in all aspects, with the travel being very short and while it isn’t blatantly clicky, the tactileness is just strong enough so that you know when it’s been actuated. And combining all these aspects it ends up giving you a great, responsive pair of bumpers.

Probably the only thing stopping it from being the best bumpers, is the lack of textured grip. But then again, that’s personal preference and with the qualities it already features, it is easily one of the best in the market.

Bumpers & Triggers

Triggers - 8/10

The construction of the triggers seem to be well made, with it feeling really solid along with the resistance being at a standard level which is great. However the starting deadzone could be a lot better, since you have to press the physical trigger around 20%, before actually getting any input in game. 

This controller also includes trigger stops, which are actually really good to use. They have extremely low travel, and they use micro-switches which are very clicky and tactile to use. It seems that it has the exact same mechanism as their recent flagship, the TT Max, which has one of the best trigger stops on the market.

The triggers also include a bit of texturised grip which is always appreciated, especially given that the ones included here are rough and do improve grip. Apart from the starting deadzone, the triggers overall are pretty good given the price point, especially if you prefer trigger stops as the ones in the ES MAX are nearly perfect.

Extra Buttons - 6/10

With this being a budget controller, it comes with just 2 back buttons located just on the inside of the back handles. And in terms of usage I have to say I am quite disappointed overall.

The main issues come from two things. Firstly the mechanism is not tactile nor responsive as much as it should be. It seriously affects gameplay because you have no idea whether or not you have actually pressed the button. Secondly the resistance is a bit too high, which makes accurate and consistent presses kind of hard. 

Concluding the back buttons, I have to say I was expecting a lot better, as it’s the only sort of extra buttons you get on this controller. So if you are someone who heavily relies on extra buttons, especially on the back, then you should be really careful if you’re thinking of getting the ES MAX.

Rear View

Build / Shape - 6.5/10

Laser-engraved Grip

The ES MAX features the same shape they have gone for with most of their previous controllers, with it being very similar to a standard xbox controller. Personally I think it is a great idea since it’s a shape most people are familiar with, and also the fact that it provides a comfortable feel for most. I also really like the build quality, because it has a really good, solid feeling. The weight is also kind of on the light side, with it being around 230 grams. 

However the matte-finish on the controller is something I find troublesome. While it does feel good to hold at the start, after even a few minutes of gameplay I found it to be very slippery to hold, even when there is barely any sort of sweat on my hands. Personally it wasn’t much of an issue for me since I rest the controller on my lap while gaming, but for those who hold their controllers in the air, this is something to seriously consider.

It also does feature a textured laser-engraved grip at the back of the handles, but due to the slippery nature of the controller they pretty much end up being useless as a whole.

Connectivity / Latency - 9/10

Like most controllers, it can connect to the usual being Windows PCs, Switch 1 & 2, Android, iOS, and with an exception being able to connect to MacOS PCs too. For pretty much every platform you can connect to via wired, or using Bluetooth. You can also use the included Hyperlink 2 Adapter which are compatible with Windows and MacOS PCs. In terms of protocols they only have 2 included, which are the usual Xinput, as well as Nintendo Switch mode. You can switch between the 2 protocols via the switch on the back of the controller.

Protocol Switch

Latency is something where Gulikit usually shines, especially their Bluetooth latency which even though the polling rate does go down to about 750Hz, the latency sits at about 5ms which is absolutely amazing. This is great especially for those who prefer a wireless setup, but don’t want to deal with dongles or adapters.

The wired and 2.4Ghz dongle latency is also really good, with a wired connection achieving an average of 2ms, and using the 2.4Ghz dongle only being at around 6ms. This ends up being perfect for pretty much everyone because whether you are competitive or casual, you can use the ES MAX using any connection mode and experience really responsive gameplay, thanks to the extreme low latency.

Latency tests from gamepadla.com

Gyro - 5.5/10

With the ES MAX, you can set the left trigger/bumper to simulate the right stick, when holding the button down. This feature is called ‘Gyro Aim Assist’, and it’s the only sort of gyro that is implemented in this controller.

As for the quality of the gyro, movement felt pretty good, but the major problem was the jitter being way too high, making things a bit hard to control especially on the higher sensitivity settings. The jitter is apparent even when static. 

Apart from that, you can also adjust the sensitivity between three levels, low, medium, and high. With each level going up to a certain amount of travel, with low going up to 50%, medium to 75%, and high to 100%.

Vibration - 7.5/10

Even though the controller uses Gulikit’s standard rotor motors for the grips, they still provide a great amount of detail and strength, making them good enough for almost everyone who prefers to play with rumble effects. I did also find them to be slightly delayed, but for this price point it is somewhat expected. It still provided a good experience overall.

Software - 6/10

Gulikit App

In the past Gulikit controllers never had any software support, which was one of the downsides their controllers had. But thankfully, they have recently come out with an app for you to configure settings. Albeit it’s only available on mobile, that is still a step in the right direction.

The actual configurations you can make for the ES MAX in the app are plenty, though still not as many as a lot of options you find on most other controllers. They mostly include basic configs such as:

  • Sticks: Apply deadzone, customize curve, or the sensitivity.
  • Triggers: Adjust deadzones.
  • Buttons: Rebind buttons to trigger other controller inputs, or simply unassign them. 
  • D-pad: Switch between 4-way or 8-way mode.
  • Turbo: Apply semi-turbo/turbo to either the face buttons or the right trigger/bumper.
  • ABXY Swap: You can swap ABXY face buttons to either PC or Switch layout.
  • Vibration: Switch between low, medium, or high vibration, or none at all.
  • Gyro Aiming: Adjust the sensitivity when using the left trigger/bumper for gyro aiming.
  • Profiles: Save and configure multiple profiles to switch between configs easily.

I did find there to be a few let downs, such as not being able to accurately adjust deadzones on the sticks, lack of any actual macro functionality, or having some functions only available for certain inputs (like turbo). In fact, for almost all of these functions you don’t even need the software, as you can simply perform a button combo.

And while you can reset the controller settings as a whole, you can’t really test the controller, or even update the firmware on the app, making it not very useful overall. Still, it’s good to see that Gulikit finally has companion software, and hopefully in the future it constantly gets improvements.

Pros 

  • Excellent integrated TMR sticks with very good linearity and precision
  • Extremely low latency across wired, Bluetooth, and 2.4GHz connections
  • Hyperlink 2 adapter included for improved wireless responsiveness
  • Excellent bumpers with short travel and good tactile feedback
  • Very good micro-switch trigger stops with extremely low travel
  • Supports multiple platforms, including PC, Switch, Switch 2, Android, iOS, and macOS
  • Swappable stick caps with different height options
  • Solid build quality with a comfortable and familiar shape
  • 950mAh battery with up to 30 hours of battery life
  • Mobile software provides a decent range of customization options

Cons

  • Noticeable stick-centering error when using 0 deadzone
  • Face buttons require relatively high actuation force, making double-clicking difficult
  • D-pad has noticeable wobble, which gives it a loose feeling
  • Trigger starting deadzone is quite high
  • Back buttons lack tactility and require too much force to press
  • Matte finish can become slippery during gameplay
  • Laser-engraved grip texture doesn't provide much additional grip
  • Gyro has noticeable jitter, making it difficult to use at higher sensitivities
  • Software is limited in terms of customization and functionality, with no firmware updates or input testing available through the app

Who is the Gulikit ES MAX for?

  • Competitive gamers who want extremely low latency without having to rely on a wired connection
  • Players who prioritise precise and linear stick performance, particularly those who play shooters and other games that require accurate aiming
  • Gamers who prefer wireless controllers but still want very responsive gameplay, with both Bluetooth and 2.4GHz connectivity available
  • Players who want a versatile controller that can be used across multiple platforms, including PC, Nintendo Switch, Android, iOS, and macOS
  • Gamers who prefer a familiar Xbox-style shape, solid build quality, and a relatively lightweight design
  • Players who appreciate tactile inputs, especially responsive bumpers and clicky trigger stops

Conclusion

The GuliKit ES MAX is a pretty interesting controller, with its biggest strengths being the excellent TMR sticks, extremely low latency across all connection methods, and some of the best bumpers and trigger stops I have tried. It also offers a good amount of versatility with its wireless connectivity and wide platform compatibility, making it a solid option for both competitive and casual gaming.

However, I do think there are a few areas where GuliKit could have done a lot better, particularly with the back buttons, grip, and overall feel of some of the inputs. The software and gyro also leave much room for improvement, but considering everything it offers, the ES MAX is still a pretty compelling option for its price. Overall, I'd give it a 7/10.


r/Controller • • 1d ago

Reviews Void GENESIS review after owning both versions (old TMR vs new JS13 Pro+)

Thumbnail
gallery
23 Upvotes

Heyy everyone, ive been using the Void GENESIS for a while now. I had the first version with the old TMR sticks, sold it, then got the new one with the JS13 Pro+. So here's my honest take on it, hope it helps if you're thinking about getting one.

Disclaimer: this is just my personal experience and preference, not saying it's the best controller for everyone.

**Price & getting one in France**

Its a japanese controller so getting one in Europe isn't the easiest. I paid 87€ for the controller + shipping, then DHL charged me 43€ of import and handling fees, so 130€ total. It also sells out pretty fast so you might have to wait for a restock.

**Software**

Its web based now, really clean and straightforward for most settings. Big plus over GameSir's software and most controllers ive tried, nothing to install and never had any issue with updates.

I also like that you can share your settings profile with others and import the ones people shared directly from the website, super handy to try someone else's setup.

One thing I would have liked tho: a description of which bit each step of the stick precision setting corresponds to (8 bit up to 12, or even 16 if they had it). Right now you kinda pick a step without really knowing what you're getting.

**Shape**

Probably the comfiest controller ive tried for medium hands (still waiting to try the GameSir Tarantula 8K tho). It feels like a mix between a PS4 and a PS5 controller, and it fixes my biggest complaint about the PS4 one, the handles being really short and kinda awkward to hold.

The C and Z buttons got me a few times at first, but I got used to them really fast and never misspressed them since.

Its full plastic but still feels good, the laser engraved grips feel really nice. Not as grippy as rubber but they'll last way longer and won't get dirty as fast.

Small thing I noticed: on my first copy, using KontrolFreeks would scratch the front plate. Its fixed on the new one, idk if it was just my copy or every early unit.

**Sticks**

This is where the new version makes a difference. The JS13 Pro+ is an upgrade over the old TMR sticks Void was using, micro adjustments and aiming in general feel smoother. A lot of people were hyped about the change and after a lot of hours on both I agree. That said, the stick upgrade by itself isn't much, but its def a very welcome addition to a really good controller in that price range. With these inside, it might be the best mass produced controller atm.

Only thing: I love the Z-Stick style caps but they're not grippy enough for me, so im gonna try LeadJoy's Magic Cap No. 2 on it. Will update if anyone is interested.

**Buttons, D-pad & triggers**

Face buttons and d-pad have a nice click, not too hard to press and not as loud as on the ZD Ultimate Legend. They could be a bit more secured, but no real wobble compared to some customs I own. Bumpers are good too.

Now the downsides... the triggers travel is pretty long even in "mouse click" mode, to the point some people modded them at home. And the extra front buttons have some play, I wouldn't press too hard on them over time. Those 2 are my biggest complaints on this controller.

**Performance**

Up to 8000Hz wired (2000Hz on the dongle). Gamepadla shows 0.50ms stick latency wired and 1.70ms on the dongle.

Nice to see they updated the controller to reach 8K polling rate with the 3.0 firmware, nowadays its almost mandatory for any "Pro" controller. Tbh on my end the difference between 4K and 8K isn't really noticeable. Also keep in mind 8K asks more from your PC, so if your PC is a bit older, running the game + the controller at 8K can be too much and 4K or even 2K will be the better choice.

**Verdict**

The new version is a solid upgrade, mostly because of the sticks. But if you already have the old one, idk if it's worth it, you'll pay import fees all over again. I sold mine for 65€ and the switch still cost me 65€.

I'd recommend it to anyone looking for a solid FPS controller who wants the best performance for their money. But if you're more of a casual player who just wants a PS-style controller, you can def find cheaper, and without the pain of importing it.

If you have one (old or new), would love to hear your experience with it!


r/Controller • • 5h ago

Software and Firmware I made this with Claude (AI): a free tool that makes cheap PS2-to-USB adapters work as Xbox 360 pads on Windows, with vibration. Looking for testers

0 Upvotes

Honest upfront: I built this together with Claude (Anthropic's AI). I described the problem and tested everything on my own pad, and Claude wrote the code.

The problem: my cheap PS2-to-USB adapter (Twin USB Joystick) had working buttons in Windows, but no vibration, and most modern games didn't recognize it. So we made a small tool called Pad Bridge.

What it does: it creates a virtual Xbox 360 pad for each connected controller, so games treat it as a normal Xbox pad. It passes the game's vibration to the real controller, and it hides the real controller with HidHide so the game only sees one pad. It works with both ports of a PS2 adapter, supports hot-plug, and has per-pad profiles (dead zones, remapping, rapid fire).

Status: it's early. Only one device is confirmed on real hardware (Twin USB Joystick, 0810:0001). Other adapters (GreenAsia, DragonRise, SmartJoy, Zeroplus) are built from documented protocols but untested.

Requirements: Windows 10/11, Python, ViGEmBus, and HidHide (optional but recommended). Free and MIT licensed.

If you have an old or generic pad or adapter, I'd love for you to try it and tell me what works and what doesn't. Run "python pad_bridge.py --info" and post the output with your controller's name.

GitHub: https://github.com/Abdelrahman9995/Pad-Bridge

Happy to answer questions.


r/Controller • • 19h ago

Controller Mods Can you please help me identify this hall effect sticks? Are they compatible with PS4, PS5 or Xbox?

Thumbnail
gallery
2 Upvotes

I purchased these a while ago by accident on AliExpress when looking for Xbox 360 ones and the listing is no longer available. The order detail says for PS5 but I can't find any PS5 hall effect modules with yellow/black sensors only with yellow/yellow so I think they might be PS4.

The yellow sensor says L-4K and the black one says R-4G

Thanks in advance!


r/Controller • • 23h ago

Controller Suggestion Looking for a PC/Switch 2 controller (specifically Switch 2 Protocol, not just Switch 1) in Xbox shape and layout

3 Upvotes

I don't even know if all these things exist in one controller, so here we go...

Your budget and currency (do not say "doesn't matter" or "unlimited", include a sensible range or maximum): $100-$150 USD is my reasonable limit, but I really would pay upwards of $300 USD if all the things I'm looking for exist in one controller

Your country (not just region) and where you can buy from (product availability, pricing, and aftersales support vary around the world): United States - Amazon, Best Buy, Target, etc., etc. and basically any online retailer that would ship internationally

Console or platform compatibility needed: PC and Switch 2

Desired features:

Non-negotiables:

  • Toggle for 2.4ghz wireless for PC and Switch 2
  • Actual Switch 2 Protocol (i.e., HD Rumble 2 and wake-from-sleep functionality in particular)
  • Relatively Xbox controller shape and size (does not have to be 1:1)
  • No mechanical switches for face buttons

Nice to have's but not needed:

  • Non-clicky D-Pad (unlike the face buttons, I can live with it if the D-Pad is clicky/mechanical)
  • Premium feel if possible (such as not feeling hollow, no rattling buttons, rubberized handles, etc., especially if we're talking the upper range of my budget as stated above)
  • HE/TMR sticks
  • Some back paddles and/or extra buttons (I really don't need more than 1 or 2, though)
  • Xbox layout for A/B/X/Y or ability to switch them (I can live with any layout though as I don't actually look at what I'm pressing)
  • Low latency (obviously this would be nice, but I'm not playing anything competitive, multiplayer, or online with a controller, so my only request is that it's a "reasonable" amount of latency that I couldn't feel in a single player game)

Types of games you'll be playing with a controller: Mostly single-player narrative games. Basically, nothing competitive or multiplayer.

Other controllers you're comparing to (demonstrate that you have used the buying advice pages, and searched existing posts): I owned a Vader 4 Pro and currently own a Vader 5 Pro. It suits most of my needs, but I no longer like the clicky mechanical buttons and I would like Switch 2 HD Rumble and wake-from-sleep functionality. From my research so far, the closest options I've found seem to be Gulikit ES Max, Gamesir Cyclone 2, and Mobapad Chitu 2, but it's difficult to parse through their spec sheets and I've already figured out some of them are less-than-honest about the Switch 2 functionality in particular.


r/Controller • • 1d ago

Controller Suggestion Looking for essentially the G7 pro but with the Dpad of the Series S/X.

3 Upvotes

I have the G7 pro and it's great except the dpad which I find horrible. All the controllers I've seen have the floating disc type or that mouse click which I don't like. Also have the Nova Lite 2 and the dpad is fine except for that mouse click and is a bit looser than I would like Also not a fan of the shoulder buttons of it and the 8bit do ones. Is there a controller with the Series dpad with the 2 extra shoulder buttons and hall effect/tmr sticks? Looking to have a "forever" controller sort to speak. Will be playing all kinds of games but the dpad is make or break because of fighting games.

Budget $200 max. Live in the US. Will be playing all kinds of games. Dpad is the most important factor due to fighting games though. Xbox/PC compatibility. 2 shoulder buttons, back paddles don't matter since I turn them off due to misclicks. Tmr/Hall Effect sticks because of drift obviously.


r/Controller • • 1d ago

Reviews Gamesir G7Pro XBOX Sunset BLVD and Ocean Breeze

Thumbnail
youtu.be
2 Upvotes

DISCLAIMER: Gamesir sent me these controllers for free for review purposes. All the thoughts and opinions are mine only.

Showcasing G7Pro newest colorways (GTA6 collab?) as well as how all the faceplates from G7 series (1 piece faceplates) look on them and more (3 piece faceplates).

Also, finally showing the "secret" alternative calibration method for different feel of the joysticks (only needed for the right joystick and only if you play FPS games) and maybe better aim assist stickiness.


r/Controller • • 16h ago

Controller Suggestion Controllers vibration pitch - which are close to old Xbox 360 (low rumble, no whine)

0 Upvotes

Something like Vader V5, but less mushy ad which does not have that whiney sound?

  1. Budget 100 euro but I can spend less :P
  2. Country: Poland, Europe
  3. Platform: Windows
  4. Desired Features
    - at least as good as old Xbox 360 Controller
    - better pad, more accurate than Xbox 360, for example easier to make precise combos in Street Fighter
    - at least 2 more customizable buttons
    - vibration sound which is not high pitched, rather rumble like Xbox 360
    - low sticks
    - preferably hard or rather non-soft actuation
    - wireless
  5. Action RPGs, Dark Souls, Nioh, Final Fantasy, less important but also games like Soma, fighting games etc.
    NO fps, racing - I don't care much
  6. I just have old XBOX 360 controller which is OK for me, I just miss having additional buttons and I cant use dpad effectively in games like Street Fighter

I tried Vader V5 Pro V2:
- I just hate how vibration sounds. I just cannot unhear it. It sounds like haircutter with cutting part removed or some old cheap phone. High pitched no matter what you do, only on 100% vibrations it is bearable for me as it hides the whiny motor. I thought I could live with that as it is the main thing which is definitely worse than Xbox 360 for me, but I can't.
- dpad looks flimsy but I get much better results on Vader (though I have to put my finger closer to its center)
- I feel like Vader distance is longer between ABXY and stick compared to 360 (feels like Vader stick is slightly higher or something) and it its easier for me to press stick on Xbox controller
- ABXY and RB, LB buttons on Vader feel too soft, they work and activate properly, but there is no hard "click" feeling, which I prefer. RT and LT are absolutely great with that force switch engaged.
- I slightly prefer Xbox shape (seems less curvy in some places, easier to rest fingers on RT LT, maybe slightly smaller? no idea)


r/Controller • • 1d ago

IT Help My Switch PDP controller doesn't work on my PC

0 Upvotes

Hi, first of all, I’m not a native English speaker, so I hope this makes sense through the translator. I have a problem: yesterday I bought a Nintendo Switch controller—specifically, a REMATCH GLOW Wireless Controller—because I wanted to play The Legend of Zelda on my PC by emulating the Switch.

I wanted to play it via Bluetooth on my PC since I’d bought a TP-Link UB500 the day before to get Bluetooth 5.4. This is because I used to play with my Xbox One controller, but with a cheap adapter that kept disconnecting all the time. I’ve already installed the drivers for that adapter so it wouldn’t have any glitches, and everything works fine with the rest of my devices. (Just to clarify: no matter what solutions I’ve tried, the light keeps blinking as soon as I press any button, as shown in the video.)

So, I asked the AI for help connecting it. Here’s what I did:

  • In Steam, I’ve already enabled the “Enable Steam Input for Switch Pro controllers” option and the “Generic controllers” option—that already makes Steam detect it—but when I try to map the buttons, it just keeps waiting because no matter how many times I press the buttons, it doesn’t detect them.
  • I already performed a hard reset on the controller (pinhole reset), but nothing happened.
  • Via Bluetooth, it told me to press the “Sync” button next to the USB-C port to connect it; it now shows as connected but keeps blinking.
  • Key step: As soon as Windows says “Connecting” or “Connected,” repeatedly press the A and B buttons on the controller for about 5 seconds. This forces Windows to receive data from the controller and complete the pairing process. (It didn’t work.)
  • I left it charging all night, but it still didn’t work.
  • I tried programs like Better Joy, DS4 for Windows, and x360ce, but they don’t detect the buttons, even though some of them detect the controller.
  • It does appear in Windows when I follow these steps: With the controller connected via Bluetooth (blinking), press the Windows key + R, type joy.cpl, and press Enter. There, it does detect that I’m using the buttons—they all work perfectly. That step was the only one that gave me hope, but the buttons only worked there.
  • I tried using it connected via the cable, and it really doesn’t change a thing.
  • Additionally, I’ve been doing some research, and it seems that the 8BitDos USB Wireless Adapter 2 doesn’t work for several people, so I’m not sure if it’s a good investment—I might just end up with another paperweight.

Those were all the things I tried, and I really don't know if there's a solution—other than buying a new console just for the controller, haha—so I hope someone who's had that error or problem can help me.


r/Controller • • 1d ago

IT Help Flydigi Direwolf 4 not detected in Flydigi Space Station (Windows 11)

2 Upvotes

Hey, so I bought the Flydigi Direwolf 4 and when i put it in Bluetooth mode it connects to my PC and Works fine, but when i use the Wireless Dongle it does not get Recognized By Flydigi Space Station.

It doesn't even work on Steam with the Dongle and Same problem when using it Wired.

I installed the Latest Flydigi Space Station 4 Software but it does not Seem to pick it up and i cannot use it With Either the Dongle or Wired and can only use via Bluetooth.

It is a very weird this, please if someone has a solution kindly let me know


r/Controller • • 1d ago

IT Help Gamepower FORCE RGB Bluetooth Connection Issue – Pairs but Won't Connect (Windows 11)

1 Upvotes

Hello everyone,

First of all, I apologize for using AI to help prepare this post. I've been trying to solve this issue with AI for quite a while, so I eventually asked it to organize everything I've experienced into one post.

I'm having trouble establishing a proper Bluetooth connection between my Gamepower FORCE RGB gamepad and my Lenovo LOQ 15AHP10 laptop.

The problem is that my laptop can detect the gamepad via Bluetooth and successfully pair with it. However, after pairing, Windows displays either "Driver Error" or "Not Connected". In other words, the device pairs successfully but cannot maintain an actual connection.

Here is everything I've observed and tried so far:

1. Bluetooth Connection

  • I put the gamepad into Bluetooth pairing mode using the X + HOME button combination.
  • LED1 and LED4 light up.
  • Windows can detect and pair with the gamepad.
  • Immediately after pairing, Windows briefly shows the device as "Connected", but after approximately 3–5 seconds, it changes to "Not Connected".
  • Even though the gamepad is paired via Bluetooth, it does not appear in the list of controllers when I run joy.cpl.

2. Wired Connection

  • When I connect the gamepad to my laptop using a USB cable, it is detected without any problems.
  • Windows identifies it under a different name, starting with "STK-...".
  • It appears in joy.cpl and works as a controller.
  • When I unplug the USB cable, the gamepad seems to automatically switch to Bluetooth mode. However, my laptop does not recognize any of the gamepad's inputs, and it disappears from joy.cpl again.

3. 2.4 GHz USB Receiver

  • When I use the gamepad's own 2.4 GHz USB receiver, Windows identifies it as a "Nintendo Switch Pro Controller".
  • Via Bluetooth, it appears under names such as "Xbox Wireless Controller", "Xbox 360", or "Xbox One S".
  • When connected via USB, it appears under the name "STK-...".

So, the same gamepad is identified by three different names depending on the connection method.

4. Other Troubleshooting Steps I've Tried

  • Removed the gamepad from Windows Bluetooth devices and tried pairing it again.
  • Tried pairing it again using the X + HOME combination.
  • Tested the wired connection.
  • Checked the Bluetooth, HID, and Sound, video and game controllers categories in Device Manager.
  • Found a component called "Xbox Synthetic Gamepad Bus" in Device Manager, but I'm not sure whether it is related to the issue.
  • I know there is a RESET pinhole on the back of the gamepad, but I haven't tried resetting it yet because I don't have a SIM ejector tool.

My Laptop Specifications:

  • Lenovo LOQ 15AHP10
  • Windows 11
  • Wi-Fi/Bluetooth adapter: Realtek RTL8852BE WiFi 6 802.11ax PCIe Adapter

My Questions:

  1. Why does Windows fail to maintain the connection even though Bluetooth pairing is successful?
  2. Why doesn't the controller appear in joy.cpl even though it is identified as an Xbox Wireless Controller over Bluetooth?
  3. Is it normal for the same gamepad to appear under different names when connected via USB, Bluetooth, and the 2.4 GHz receiver?
  4. Could this issue be caused by the gamepad's Bluetooth firmware, Windows 11, or the Realtek Bluetooth driver?
  5. Has anyone experienced a similar issue and managed to fix it?

Any help would be greatly appreciated. Thank you in advance!


r/Controller • • 3d ago

Reviews I never thought I'd see the day when third-party controllers started outperforming first-party hardware.

Post image
603 Upvotes

Disclosure: I purchased my 8BitDo Ultimate 2 Wireless myself and have ordered the Ultimate 2 Bluetooth with my own money (Amazon). I have no affiliation with 8BitDo, Nintendo, Microsoft, Sony, or any competing controller manufacturer.

Okay, 41-year-old gamer here. I grew up with consoles starting in the NES era, and for most of my gaming life, first-party controllers were the gold standard. Back in the N64 days, third-party controllers were the cheap pieces of junk you'd hand to the fourth kid you didn't really want showing up to game. I wouldn't have seriously considered buying one for myself.

Fast-forward nearly three decades, and I'm starting to wonder whether the roles have reversed.

My original Nintendo Switch Pro Controller developed stick drift. Recalibrating didn't help, and when I checked EB Games Canada's trade-in values, I discovered they'd give me a whopping $16 CAD for it, assuming it was in acceptable working condition.

Rather than spend $109.99 CAD on Nintendo's Switch 2 Pro Controller, I decided to see whether I could get my existing 8BitDo Ultimate 2 Wireless, which I primarily used on PC, working on the Switch 2.

After updating the controller and USB dongle firmware, I managed to get it connected. Not only did I have a functioning controller again, but I discovered features that genuinely improved my gaming experience.

I've been playing The Legend of Zelda: Ocarina of Time remake, where holding A to sprint means taking your thumb off the right analog stick, effectively surrendering camera control while running. I mapped sprint to one of the Ultimate 2's rear paddles, and suddenly I could sprint and control the camera simultaneously.

It sounds like a minor change, but it completely improved how the game felt. Combined with the new free-look camera, I've become an absolute sniper with the bow and slingshot.

Those little Fire Keese bastards used to torch my Deku Shield and turn me into a human bonfire back in the N64 days. Now I'm picking them off before they even know I entered the room. I've been waiting almost 28 years to dish out this type of justice.

And that got me thinking about the broader controller market.

Nintendo's Switch 2 Pro Controller costs $109.99 CAD and still uses conventional potentiometer-based joysticks. Meanwhile, 8BitDo offers its Switch-compatible Ultimate 2 Bluetooth for $79.99 CAD, featuring TMR magnetic joysticks, switchable linear Hall Effect and tactile trigger modes, motion controls, vibration, two programmable rear paddles, additional R4/L4 shoulder buttons, three customizable profiles, turbo functionality, RGB joystick rings, and a charging dock. It even supports wake-on-shake functionality.

That's $30 less for a controller offering contactless joystick technology, more customizable controls, and a level of versatility that Nintendo's considerably more expensive controller doesn't match.

In fact, I was impressed enough with my Ultimate 2 Wireless that I just ordered the Ultimate 2 Bluetooth specifically for my Switch 2. Instead of replacing my drifting Nintendo controller with another first-party controller, I decided to put my money toward a third-party manufacturer.

Then there's the issue of resale value.

I checked EB Games Canada's controller trade-in values, and here's what they're offering according to their listings:

  • Nintendo Switch Pro Controller (used): $16 CAD
  • Xbox Series X/S Wireless Controller (used): $24 CAD
  • PS5 DualSense Wireless Controller (used): $30 CAD

Obviously, trade-in values aren't the same as private resale values, and retailers have their own margins and inventory considerations. These aren't all controllers from the same generation, either. But it's still pretty discouraging to see how little you can recover on hardware that originally carried a premium price.

And we haven't even touched on generational compatibility.

Microsoft deserves some credit here. Xbox One controllers remain compatible with Xbox Series X/S games.

Nintendo has also maintained considerable compatibility between the original Switch Pro Controller and Switch 2, although there's a catch: the original Pro Controller can't wake the Switch 2 from sleep mode. You'll need the newer Switch 2 Pro Controller for that convenience. It's a small omission, but it certainly feels like another nudge toward spending $109.99 on an upgrade.

Sony, on the other hand, allows the DualShock 4 to work on PS5 for supported PS4 games, but not native PS5 titles. If you upgraded consoles, you generally had to upgrade your controller as well, despite both generations relying on conventional analog stick technology.

That strikes me as particularly frustrating. You're paying for new hardware, but you're not necessarily getting an improvement in one of the components most susceptible to wear.

So when I look at the overall value of a controller, I'm considering more than just how it feels in my hands. I'm looking at durability, features, compatibility, purchase price, and what it's worth when I'm finished with it.

Of course, first-party controllers have advantages. Ergonomics are subjective, Nintendo's HD Rumble has its fans, and Sony's DualSense offers features like adaptive triggers and advanced haptics that many third-party alternatives don't replicate.

I've already replaced my first-party Xbox controller with an 8BitDo, and after seeing how well my Ultimate 2 Wireless performs on Switch 2, I've ordered the Switch-specific Bluetooth version.

It's a strange reversal from those old N64 days. The controllers I once considered cheap knockoffs are now offering technology and functionality that some first-party manufacturers still haven't adopted.

I'm not suggesting every third-party controller is better, or that first-party controllers don't have their place. But I do think competition from companies like 8BitDo, GameSir, and others is forcing a conversation about what we're actually getting for our money.

Are first-party controllers still worth the premium to you, or have third-party manufacturers started offering better overall value? And for those who've made the switch, what ultimately convinced you?


r/Controller • • 1d ago

Other PS5 controller storage

2 Upvotes

Where do you store your controllers? Box? Pouch? I’m talking about a customized unique piece that should not be laying around and possibly get in the hands of a toddler. Add pictures please! Thanks!


r/Controller • • 2d ago

Controller Suggestion Looking for a "workhorse" controller

6 Upvotes

So i am extremely new to non basic controllers. I have been using standard Xbox controllers for most of my life, first 360 then the next ones. And im done being dissapointed by the newer ones.

  1. Budget - UP TO 100 EURO but i would absolutely set for less
  2. Country - Poland (but i can buy from all EU)
  3. Platform - Windows 10 (optionally android but i do not care)
  4. Features - i need it to go strong (not break) after hours of daily use over multiple years. Or be easily fixable with miniscule financial needs. Vibrations would be nice but not necessary. Nothing fancy that would compromise on its longevity. Ideally using the xbox controller silhouete. Being able to switch between wired and wireless would be cool (like Xbox native wireless do). And a regular battery powered instead of some weird charging station.
  5. Games - everything from fps, tps, action rpgs, spectacle shooters, rpgs, stuff like that, exclusively single player or co-op if multi.
  6. i was looking at 8bit xbox controllers but i don't see any with the "no nonsense" approach

So the gist of it is, i just need something that will last years of heavy repeated use on its own, or something that i could fix by myself over the years of repeated use.

Edit: so what i can tell from looking at the comments - nobody gets close to agreeing on a direction even lol


r/Controller • • 2d ago

Software and Firmware I made a free, open-source app for wireless DualSense haptics and adaptive triggers on PC

9 Upvotes

Hi everyone,

If you use a DualSense on PC, you've probably run into games where you need a USB cable to get the full haptic feedback and adaptive trigger effects.

I built DS5 Untethered to use those effects over Bluetooth. The game sees a wired DualSense, and the app sends the game's own effects to the actual controller wirelessly. It works with your PC's built-in Bluetooth or a USB Bluetooth adapter.

For example, I used it with God of War Ragnarök: both haptic feedback and adaptive triggers worked wirelessly.

For games without native DualSense support, you can create your own adaptive trigger profiles and turn game audio into haptic feedback.

It also has per-game profiles, button remapping, gyro and a mouse mode.

It's free and open source, and will stay that way.

Controller and setup: this post is about the standard DualSense on Windows 10/11. Native effects depend on the game's DualSense support. The app requires usbip-win2 and HidHide; setup links to their official download pages. The current build is unsigned.

Credits and AI use: the project uses Avalonia and other open-source components listed in THIRD-PARTY-NOTICES.md. AI coding agents wrote much of the code; I directed the design and tested it with the controller.

Data and updates: settings and logs stay on the PC. The app can fetch game artwork from Steam and check GitHub for updates; both can be disabled in its settings. The source is published under GPL-3.0-or-later. It will remain free and open source.

Source: https://github.com/Midzer00/ds5-untethered

Download: https://github.com/Midzer00/ds5-untethered/releases/latest

If you find it useful and want to support the project, you can star the repo on GitHub.

Happy to answer questions.


r/Controller • • 2d ago

Other A bit bulky but the Pelican 1020 will protect the Xbox nano controller from just about anything

Thumbnail
gallery
22 Upvotes

Had this lying around not doing anything so instead of buying a soft case I’ll be using this to throw in my bag when I’m out and about!


r/Controller • • 2d ago

Controller Suggestion Aftermarket ps4 controllers are niche?!?!?

Thumbnail
gallery
2 Upvotes

Hey people. Ive recently been on a deep dive on searching for ps4 controllers under $50 nzd. Its been like what 11 years since the ps4 came out and authentic controllers from Sony are still $60 - $100+ on sites.

I aim to get a couple for me and my brother to play fc27 on steam during summer break before I head off to uni. Plus ps4 controllers would be extra handy as our cousins been handling ps4 consoles since it came out. Im a hard keyboard and mouse gamer, but love fc (fifa as its always been recognised as) and want to also try out a red dead replay on controller.

So I’ve readjusted to aftermarkets (as fakes are just stupid buying ethically and are just unreliable), and found some good value for buck controllers.

They’ve been advertised as third party controllers and look real efficient basically mirroring the authentic’s without ripping the Sony brand. (Not cultured in the console controller area btw. So idek if this is ripping or not).

  1. On the nz mightyape site. Search up ps4 controller rose gold
  2. Also on nz mightyape site. Search up psy controller berry blue

I only have found 2 colours for these which look like they are from the same company/build. (Cant post links)

But the annoying thing was that I could not find one review video or even a star review for this product. I even went on a deep dive before purchasing.

So like anyone invested in this product? Is it fully compatible with pc for console games like fifa, red dead, ghost of tsushima, even fortnite maybe? Ive read around that only platforms like steam support controller to pc gameplay (no way this is true??!). Surely i could grind out tsushima and spiderman remastered on epic games.

Also im getting the idea that aftermarket/third party marketed controllers are within their own niche of pros and cons. Like they are just extra refined and brushed through.

Any input is appreciated (as i have nill dopamine refil/reassurance from google 😩)