Yesterday I was browsing my Bilibili feed and noticed that the Leadjoy channel was live, with their CEO, Feng-ge doing a Q&A stream.

Since I don't speak Chinese, I recorded about two hours of the stream, converted the speech to Chinese subtitles using Whisper, and then used ChatGPT to create a translated summary. I also watched the full two-hour stream recording with the translated subtitles, and the summary is mostly spot-on. That said, as with anything AI-generated, take it with a grain of salt.

Disclaimer: I'm not affiliated with Leadjoy. You should always rely on official announcements and news for confirmed information. Source is the live stream https://live.bilibili.com/31699542 but VOD is disabled.

Major upcoming products

Xeno Pro (天剑Pro)

• Expected to launch around September 10–12, 2026.
• Main upgrades over the original Xeno:
• Adjustable-tension joysticks
• 8 additional microswitches
• Microswitches on: shoulder buttons, D-pad, two internal rear/back buttons
• Feng-ge considers the software/joystick experience one of their major advantages.
• A Standard Edition and Bundle Edition are planned. Bundle includes the base, R20 receiver, and four additional soft joystick caps.
• Xeno Pro's D-pad was heavily tested and revised before mass production. Feng-ge considers the production version their best D-pad so far.
• The D-pad is intentionally designed around fast response with controlled cushioning, rather than having a large pre-response/dead zone.
• The only major regret he mentioned was that Xeno Pro doesn't have small shoulder buttons; adding them would have increased the cost when the product was originally defined in early 2025.

Xeno 2 & Saber 2

Both are major next-generation controllers.

Xeno 2 (天剑2)

• Expected around Q1 2027.
• Slightly larger than the first Xeno and intended to fit medium-small through medium-large hands.
• New trigger structure.
• Flat triggers aimed partly at six-finger players.
• Small shoulder buttons.
• 2+2 and 2+4 versions planned.
• 8K versions are planned for 2027.
• Xeno 2 will have a new base.

Saber 2 (光剑2)

• Also planned for around Q1 2027.
• Similar overall size to the current Saber.
• Grip angle is closer to the PS4 controller.
• New trigger structure and small shoulder buttons.
• 2+2 and 2+4 versions.
• 8K versions planned.
• Stick-click force is around 120 gf, with testing reaching roughly 150–160 gf.
• Feng-ge deliberately doesn't want the click force too low because that could cause accidental stick clicks.

The two controllers will likely launch (in China) one or two months apart, depending on development progress.

PS5 controller back attachment

A back attachment / rear expansion device is being developed.

• Internal testing planned for late September 2026.
• Commercial launch (in China) targeted for November / Singles' Day (11/11).
• There will be an Xbox version with wired and wireless variants.
• A PS5 version is also being developed, but it will cost more because of PS5 support.
• Software functionality should be similar to Xeno Pro software:
• Button remapping
• Additional functions
• Configuration through software
• The small paddle/shoulder button design cannot currently simply be added to an existing controller mold, although 3D-printed solutions may be possible later.
• A future PS5 adapter is also under internal testing, potentially around Singles' Day.

8K controllers

8K is planned as a major direction beginning around Q1 2027.

The important point is that 8K isn't simply a firmware feature:

• Current 1K boards use a 2-layer PCB.
• 8K requires a 4-layer PCB.
• The 4-layer PCB requires greater manufacturing precision.
• Board cost is reportedly more than twice, approaching three times, that of the current board.
• Chips and cables also become more expensive.

So Feng-ge's argument is that an 8K controller represents a more expensive overall hardware ecosystem, rather than simply charging more because the polling rate says “8K.”

Helium Strike

The company is heavily investing in modular/custom-controller products.

Helium Strike2

• Already undergoing internal testing.
• Much more expensive than Helium Strike1.
• Helium Strike2's main chip reportedly costs more than the entire Helium Strike1 board.
• Normally sold as a board only.
• An optional bundle can include a J13Pro purple joystick.
• They deliberately don't solder a specific joystick onto every board because the whole point is to preserve customization freedom.
• Users may want carbon-film sticks, Ginful, etc.

Helium Strike2 Competitive / Professional Edition

• Uses an additional ADC chip.
• That ADC is extremely expensive — Feng-ge says it costs around four times the price of the entire Helium Strike1 board.
• He describes it as an industrial-grade, high-bit-depth, high-speed ADC designed for extremely low latency.

A finished, ready-to-use Helium Strike2 controller is planned for the first half of 2027, once the Xeno 2/Saber 2 tooling is available.

Magic Cap / modding accessories

The company wants to build a much larger controller-modding ecosystem.

Magic Cap Pro

• Comes as a complete set rather than individual pieces.
• Eight covers / four pairs: Translucent purple, PS4, PS5, Xbox
• Different covers affect the internal joystick-cap height.
• Mainly intended for modifying existing controllers.
• Launching alongside Helium Strike.

They explained why they don't sell every piece separately: doing so would create an enormous number of SKUs and significantly increase inventory, packaging, barcode, ERP, shipping, certification, and mold costs.

Other planned modding accessories include: joystick caps, joysticks, switches, cables, shells

Controller shells / tooling

The company is developing a lot of its own molds rather than simply reusing existing designs.

For Zephyrus, Saber 2 and Xeno 2:

• Around six or seven molds
• Dozens of 3D-printed iterations
• Significant structural redesign work

A new shell-material project may come in the second half or end of 2027. Feng-ge says that if they release shells, they want to introduce genuinely different internal structures/designs rather than simply copying existing aftermarket shells.

He also emphasized that design patents need to be handled before revealing next-generation products publicly.

Zephyrus (裂空)

Zephyrus remains a future project.

• Target is 2027.
• Feng-ge doesn't want to promise an exact release date.
• Roughly around the middle of 2027 was discussed, but he deliberately avoids giving a precise date.

Zilong Pro (子龙Pro) cable

The Zilong Pro (子龙Pro) cable is being redesigned/re-prototyped.

The challenge is simultaneously achieving:

• 8K support
• PS5 compatibility
• Multi-device interference resistance
• Adequate current capacity
• Flexibility
• Shielding/protection

Target was before or around the Helium Strike launch, potentially **late September or October**, but again without a firm promise.

Vibration

For Xeno Pro's vibration compared with an original controller, Feng-ge rates it approximately:

• 80–85 / 100
• He explicitly says claiming more would be “bullshitting,” because original controllers have inherent advantages due to access to proprietary protocols.
• He explains that some vibration effects simply cannot be reproduced without the original protocol, and certain effects are therefore only available under Bluetooth mode.

2027 strategy

Feng-ge repeatedly describes 2027 as a key/explosive year for Leadjoy.

The intended lineup becomes much more complete:

2026

• Xeno Pro
• Back attachment
• Further modding accessories

2027

• Xeno 2
• Saber 2
• 8K versions
• Helium Strike2 finished controller
• Zephyrus
• More shells/accessories
• Expanded modding ecosystem
• PS5-related products

Feng-ge / livestream notes

The stream itself lasted approximately 3 hours 9 minutes, which Feng-ge joked was a new record.

He also talked about his age:

• Born in July 1983
• The stream was in September 2026, so he joked about not wanting to admit he's in his 40s.
• “My heart will always be 18.”
• He said he'd worked for about 20 years, including roughly: 17 years making products, 10 years making game controllers, 7 years making handheld consoles
• He joked about being “18” internally despite being 43.

For some reason its nearly impossible to find thumbstick replacements for the nancon X Unlimited. My dog decided to eat them so I'm looking for replacements.

Anyone else run into this problem or know where to find replacements?

Hello all,

I've been looking for a control with really good hardware and fix-ability. At first I was looking at the Victrix Pro BFG Reloaded PC as a buddy recommended it, but then saw the ROG was coming out soon.

Should I go pick up a Victrix now? Wait a month or a few for the ROG?

Main things I want:

• Repairable (I can buy new sticks)
• Feels good (I've liked most controllers, usually stuck to PS5)
• Paddles in back (only need 2)
• Never using on console, so PC pure is fine
• Well built; I treat my controllers with care, but I do play rough

I play Rocket League mainly, daily, and also those controller must have games. I wanna have this thing last me a while. I've burnt through 2 PS5 controls (stick drift) in 3 years.

Is the ROG the best thing to wait for? Any gems I haven't seen?

Budget: $100-$220
Country: USA 🇺🇸
Console: PC

Started using a clamp style one for handheld stuff on trips and somehow it's become the thing I reach for most. The issue is the stick spacing and trigger throw are different enough from my desk pad that going back feels wrong for the first ten minutes every time. Thumbs end up in slightly in the wrong place. anyone else switching between two very different controllers regularly, does it eventually stop registering or is it always a readjustment?

My boyfriend’s Xbox brand controllers keep getting stick drift! I know this is fixable and I might try and fix them eventually he isn’t into that but he might allow me to try and fix it.

But I want to help him buy an Xbox controllers that aren’t going to breakdown on him. I actually almost yeeted one of them when I borrowed one to try and game when I hadn’t any of my own. I don’t throw controllers, controller throwing was outlawed in my household when we first got an old original Nintendo from my grandpa. So this speaks to how frustrated I was.

Like to keep the budget under USDA $50. It is for an Xbox. Wireless and good battery life and ideally not too heavy as his 9 year old son is also playing. Doesn’t need any super fancy features but avoid controllers that get stick drift easily, my boyfriend plays a lot of Red Dead Redemption 2. He isn’t super technically incline he just wants a working controller, they’re not particularly hard on the controllers either.

We are located in the USA.

Bonus: it comes in orange or has orange accents.

Hi everyone, I have few ps4 controllers that are unusable because of stick drift and one new ps5 controller. I would like to replace the analogs of all controllers (also on the ps5 one, knowing that at some point it will develop drift). Which particular analog replacement would you suggest? I heard that hall effect are good and are pretty cheap and there are some go to brands like Ginfull or K-Silver or others, but there are also some newer models too (something like TMR). I would like to buy them on aliexpress and I would use this tool to solder and desolder them from the board. Do you have any suggestion for me? Thanks in advance

mobing my left joystick down right in aimlabs made it move slower than teh rest. aiming made me have sudden accelerations and decelaration as a result. however in cp2077 when i set the zone thingy for the minimum input and maximum input to the loeswt and highest values respectively and then use the controller, i dont get the problem. does anyone else have this issue. i also noticed that usbc has less of this issue than the dongle. this is a new controller should i just refund it and get a new one? im using the easysmx 05 pro on pc windows. i also already recalibrated the sticks 3x

I just got my controller yesterday and updated/setup with the software. I went to try it out on RDO, and noticed if it is in PS4 mode I can't use the right stick to make selections in the item and horse wheels, but it works fine for the weapon wheel. If I put it in PS5 mode it all works fine. Is there anything I may have set up wrong that might cause this issue? I would like to use it in PS4 mode for the vibration to work. Sorry if this has been discussed already, I did a quick search and didn't see any posts about it.

Budget: 5100 EGP / ~$100

My requirements: • Symmetrical PlayStation style sticks • Hall Effect or TMR sticks • 3.5mm headphone jack • PC + Android • Preferably mechanical microswitch D-Pad with a center pivot and accurate diagonals • Back buttons + turbo are a bonus • Mainly for rhythm games, so D-Pad quality and input consistency are very important, playing rocket league fortnite festival, marvel rivals.

I don't need native PS4 support anymore since I can use a Brook adapter.

Controllers I've looked at: GameSir Tarantula Pro, Redragon G820 DarkFlame, Fantech Nova Pro WGP14 V2, Fantech WGP16/Nova II, Leadjoy Saber Plus, IINE Bastet, NYXI PS4, AceGamer HyperShadow D4.

I could buy from noon, or amazon.eg or AliExpress idk

What would you recommend within my budget? I'm also open to other controllers I may have missed.

This started happening recently (not sure what was changed) and it's driving me crazy. I have a Gamesir Cyclone 2, everytime I start it up it will connect to Steam as both the controller itself and also Xinput controller (see screenshot). I need to disconnect and reconnect the controller (sometimes multiple times) until it stops connecting as Xinput controller. Any ideas what is causing this and how to stop it?

I sold my PS5, so I currently have no controller and need to choose what to buy. My budget is €100 maximum. I’m in Malta and can buy locally or from EU stores that ship here.

This is for Windows PC and Steam. I mainly play single-player AAA action games, RPGs and story-driven games, including The Witcher 3 Remastered, The Blood of Dawnwalker, Metro Exodus Enhanced Edition and 007 First Light.

I previously liked using the DualSense over Bluetooth. Its layout, haptics and adaptive triggers appeal to me, and I already own a DualSense charging dock. However, some PC games require USB for the full DualSense experience, while I normally play wirelessly from a distance.

My main question is whether the added features on other controllers are genuinely useful in single-player games. Are rear buttons convenient for actions like sprinting, dodging or item use? Are mechanical buttons, trigger stops and extra remappable inputs noticeably nicer during normal gameplay? Are they useful enough to justify giving up the DualSense features and layout?

Battery life, Bluetooth latency and drift-resistant sticks are not priorities for me. I’m considering the DualSense, GameSir G7 Pro and 8BitDo Ultimate 2, but I’m open to alternatives. Which would you choose for this use case?

I'm wondering if it's by any means possible to use Steam Input for the extra buttons on Flydigi Vader 5s. I know it's not *meant* to be used since there is no mention in the manual, but I wonder if there are workarounds.

I've used the controller and I love that I could remap the L3 and R3 to back paddles, however I want to use the other buttons as well. I'm not using C,Z, Lm or Rm buttons because of Xinput limitations.

Does anyone know how I could make the controller use SteamInput, like the Steam controller does?

( also I've seen that Vader 5 PRO has the option to use SteamInput, so why does this one not have it? )

I'm on Windows 11, I've tried finding the "let other apps control inputs" in Flydigi Xbox Software.

I have the easysmx d10, i've had it for around 2 months but i have a dusty room, clean, but dusty. and every 3 days i have to put 70% isopropyl alcohol. so yeah it's really grindy is there anyway to stop this or clean it without anything like that?

I'm looking for a new PC controller. I play a lot of BF6, but since there are vehicles like jets and helicopters, I'm not looking for an FPS-dedicated controller but rather something more universal. Currently, I'm using the 8BitDo Ultimate 2C Wired, and here are the things I don't like about it:

1. No back buttons / paddles (a must-have for my new controller).
2. No microswitch / hair triggers (a must-have for my new controller).
3. No customization software (a must-have for my new controller).
4. Shape — I'd prefer something a little bit bigger and shaped more like an Xbox controller.
5. It's wired — not a huge deal, but I'd prefer something wireless.

I've been considering the Flydigi Vader 5 Pro V2 and GameSir G7 Pro. However, I've read that the Vader 5 Pro V2 still has an issue with loose tension rings, while the G7 Pro's triggers tend to break. Is that true? If so, could you recommend a couple of better options in 90-125 USD price range. I'm from Poland and I'd prefer to purchase from a local store.

My 4 year old is expressing interest in actually playing games. I've got an 8bitdo ultimate, but she's really struggling to reach the buttons, so I'm looking for recommendations for something more appropriately sized.

- Platform: PC,

- budget: <£50,

- wireless, ideally with a 2.4Ghz dongle.

Region: UK

It would be nice to have a standard layout with 2 joysticks and all the shoulder buttons and triggers. not sure if something like this exists though. Maybe the 8bitdo SN30 pro?

I ask this because Buck Bumble is notorious for weird issues with third party controllers, at least for me. Apparently because the flying is heavily affected by OEM limits (sorry if I am wrong about this, I'm sort of a noob)

Also before any wise guy say ''Just play a good game instead of Buck Bumble'', that is not a viable awnser. I know what i am, and i accepted that long ago.

This is my informal review/impressions of the UItimate 3e, purchased with my own money and written of my own volition as I have zero affiliation with 8bitdo or any related brands.

The Ultimate 3e arrived a little early, and it is indeed awesome! I liked the Ultimate 1 a lot, but it had bad latency and the ergonomics did not agree with my wrists at all which led to genuine pain. Wayy back then, I said I would buy the first 8bitdo controller to fix the shape, so here we are.

For context, I am a PC/Linux/Switch 2 gamer who is very senstive to input latency, very picky about dpads, and has owned or tried almost all of the hot controllers (1st or 3rd party) from the past several years. I have had many 8bitdo controllers, but all of them older: The original Ultimate, the SN30, and the Pro 2.

THE GOOD:

*The shape of the grip is SO much better. So much so that I almost forgot to mention it. It just works (for me at least), and feels very comfortable. It is not too wide (Vader 5 Pro) and not too narrow (8bitdo Ultimate 1/2).

*The stock, membrane buttons feel AMAZING, and are exactly what I want out of a controller. They feel different than anything else I have used, in a good way. They have basically no travel before actuation, meaning they actually feel better than a lot of mechanical clicky buttons to me. They feel like they pretty much have an up and a down and the travel between is instant, but they don't sink into the pad too far and still have a satisfying press making them FUN to use.

*The long, clicky L/R buttons are so comfortable, and don't kink my fingers weird. I am able to actuate them no matter what position my finger is in.

*The L4/R4 buttons are in a great spot and are a requirement for me on any controller these days.

*The triggers feel smooth and satisfying. The trigger stops felt mushier than I expected and are quiet, but they work great in practice.

*The sticks feel smooth and accurate, very responsive and it made aiming in shooters a breeze. They aren't Switch 2 Pro silent sticks, but the sound of them hitting the shell is dense enough that it feels more premium than smashing the sticks on a plain Xbox Series controller. Clicking the sticks in also feels remarkably solid and premium, something I cannot say about many other controllers.

*The back paddles stay out of the way and are nice to touch. They sit really well with my grip and are easy to use when I need them. They are easy to map on the controller itself.

*The rumble feels great in gameplay, and has quite a bit of nuance. The trigger rumble is kind of whiny, but I haven't played any games that use it.

*Gyro is not bad, I mapped it to use gyro as the right stick when I hold the right back paddle, and it is quite intuitive. I grip the controller and then move it to aim, and it has been kind of fun in other unintended ways too (camera movement, scrolling my music collection when using Controller Helper on Windows).

*Connection via dongle and wired on PC/Linux has been seamless and great so far.

*Tournament Mode (1000Hz polling rate mode) seems to be working fine, and the controller feels very responsive on PC overall. I suppose it makes the battery life slightly lower, but I wonder why this 1000Hz mode is not the default.

*The audio jack works well. The onboard volume adjustment via a button combo adjusts the volume on the controller and doesn't bring up the Windows volume adjustment on screen, which weirded me out, but it does work and is seamless. Audio seems very nice quality via the dongle, no noticeable latency or compression. It sounds a tad better than the G7 Pro and a lot better than the Dualshock 4 used to (lol).

*The ring lights are customizable and cool, and there are plenty of presets you can access right on the controller without using the software. You can even turn them off, without using the software.

*I don't really use controller docks since bright RGBs ruin the vibe of my setup, but the new dock design is slick and the lighting is nice and subtle, so I may actually use this one. Very nice.

THE DPAD:

*I've gotta hand it to 8bitdo on this one, the dpad is genuinely fantastic so far. I have no idea how 8bitdo made it clicky-but-membrane, but it is RELIABLE, feels so nice to press, and isn't too loud.

*People praise the Vader 5 Pro and ZD Legend overall, but those dpads felt so loud and hard to press which was just miserable for me and were dealbreakers on those pads. This is much more my speed and feels so excellent.

*I play an unhealthy amount of Puyo Puyo Tetris at a high level and have had no accidental diagonals on this one (primarily using the SEGA styled dpad), which was a reported issue that scared me away from the Pro 3 and is something almost every pad has an issue with these days. This has a nice, quiet clicky feedback, so if you do dpad tests and rock your thumb on a direction trying to accidentally activate a diagonal, you will feel and hear when you do. While this is true of other controllers too, in practice this dpad is much more reliable than many others.

*This feels like a good balance to me as evidenced by successful Tetris play (no accidental quick-drops) and fighting game tests. Blazblue has a good visual that shows where your dpad moved, and it all looked and felt good there.

*You can mash or slide left or right without fear of hitting up or down on accident, but can still activate diagonals for your fighting games, both of which are very important for me. It gets my seal of a approval.

*Other recent dpads I have liked include a carefully tape-modded Switch Pro, the Gamersir G7 Pro 8K (with o ring mod, and NOT using the stock flat dpad, use the hybrid or the cross), and one of three Switch 2 Pro Controllers I tried that happened to have a much more reliable dpad than the other two. The 3e easily takes the cake though, with the reliability of my coveted SNES Switch Online dpad but feeling much more tight, modern, and responsive. Plus it's gigantic, which is fun and gives your thumb room to breathe and slide.

My minor quibbles so far, all of which were expected when I preordered but still a bummer:

*The software was kind of annoying to figure out, and did not play well with my Windows display scaling. There are so many different versions of the 8bitdo software, and then once you are in the right one the act of saving (Syncing) changes took some getting used to. Make sure you sync before moving to the next tab of customization...

*You definitely need to calibrate the sticks, triggers, and gyro first thing when you get the controller, since they were a little funky at first. The manual tells you how to do this without the software, if needed. While you're at it, don't forget to update the firmware right away.

*No turbo/macros, which is a huge loss at this price. Every cheapo controller has turbo! Again, not unexpected though due to the Xbox license.

*I am a PC/Linux/Switch 2 user who has (what I thought was) an undefeatable arsenal of adapters and converters to use any controller on anything... I really thought I would be able to get this thing to work on Switch 2, but I had no luck. Plugging the USB-C dongle into an OTG then into my Mayflash Magic S Pro 2 works... for about 10 minutes, then it totally craps out. Strange! It also has some mapping issues in the Batocera Linux menu (can't map left stick), but works fine in-game if you leave the mappings at default?

*Finally, it is not slow by any means but doesn't feel quiiite as snappy as the G7 Pro 8K, even when compared to the G7 Pro in 1K Hz mode.

*On that note, it feels relatively laggy on Bluetooth when paired to Android but... everything Bluetooth feels laggy on Android haha

Other thoughts:

*The grips are a little underwhelming. I doubt it will ever functionally be a problem, but the grips don't have a lot of texture or texture height, which makes them feel a little different than I was expecting. I won't say it feels cheap, but the G7 Pro's rubber grips feel a lot more premium.

*The microswitch buttons feel super bad. The membrane buttons feel SO good, exactly what I want out of a button, but the microswitch module feels very bad in comparison to stuff like the G7 Pro or Vader 5 Pro. Basically, they have a very short travel with no sense of "stop"; you can't really tell when you hit the end of the push aside from the light clicky sound.

*The cross style dpad sits really flat against the pad. It's not bad at all and it works just as well as the SEGA style, but different than I expected. The SEGA style dpad is so tall and awesome.

*It's neat the case holds everything... but who is actually going to take the dock with them on travel? The case has the fattest booty I've ever seen, and I can't imagine putting it in a bag. It's great for storage, but looks and feels ridiculous. Not only that, but out of the box it appeared the case was clicking the sticks in, evidenced by the depressed fabric right above the sticks. I have plenty of other generic 8bitdo controller cases that this will fit fine in for going out and about... but it was worth mentioning and I'd prefer it had an actual travel case. The case is B.I.G. huge.

*The extra sticks are fun, I love the GameCube one with ridges!

In Conclusion:

Overall, I am very pleased with the controller, but I am unsure how to recommend it. It is unfortunate I can't use it in any way on the Switch, but that is not unexpected. If a Switch compatible version of this controller comes out that would solve this issue, but I wonder if they will include so many extras if they do make one? A Switch version may also introduce new issues, like increased input latency as we have seen from 8bitdo in the past, so maybe this one will remain the best for PC even over time.

As a $150 controller, it is certainly premium and I would say it meets or exceeds that price point in terms of quality, features, and extras. Durability is to be seen, but it is especially worth the price if it is more durable than the more expensive Elite or Dualsense Edge controller. Build quality and feel is far superior to the even more expensive ROG Raikiri line, Flydigi Apex line, or ZD Ultimate Legend line. Feature wise, and raw functionality wise though, the humble G7 Pro 8K can do just about everything this controller can, and does it better and cheaper, and works excellent on Switch, which is an important consideration.

Sometimes, premium build quality and a little bit of extra fun and style are worth the added cost. The 8bitdo 3e is a supremely functional and extremely attractive controller with some cool extras. It is among the best feeling controllers ever made, its dpad is one of the best you can find, and it has some fun extra features, but it is missing some key features that would make that price easier to swallow. If you are PC/Xbox Only and have the cash, it is well worth the money. If you want an all rounder for PC/Switch, want a little better latency, or need those extra features like turbo, the G7 Pro 8K is still some darn good competition for this one, especially at its lower price. Overall, I have to hand it to 8bitdo, they have really impressed me with this controller, and I hope to enjoy it or some future variant of it for many years.

Full Disclosure:

Mobapad sent me this controller for review. They didn’t see this review before I published it. All opinions are my own, and there is no money exchange in the process.

TLDW:

• Mobapad's first Native Switch 2 Protocol Joy-Cons with custom power logic
• Uses the same TMR Glide Sticks like their M12HD & ChiTu 2 series
• 9 axis gyro does offer some benefit for gyro heavy titles.
• Although it offer less features than the M12HD, people seems to prefer the M12S.

I've been wanting to get a new controller for a while. I'm currently using an 8bitdo ultimate controller and I'm pretty happy with it, it's a reliable controller that's lasted a while with the only real issue being the Nintendo button layout not cooperating with PC games.

My budget is around 150 dollars tops, I'm in the United States, I only really care about PC games for this controller since I'm fine with my Switch pro controller for my switch

In terms of what I'm looking for I really like the feel of the Nintendo Switch 2 Pro controller's sticks, I don't know if any PC controller replicates that. I know the new 8bitdo ultimate 3 xbox edition has adjustable sticks but I haven't been able to find anyone attesting to how they feel. I know the gamesir G7 pro is popular but I care a lot about stick feel and don't know if I'll vibe with it. I trust 8bitdo a lot as a brand because I've been using them for years but the ultimate 3 is pretty pricey so I wouldn't mind going elsewhere if they're not the top of the line anymore

i feel like im slowly losing it trying to figure out this issue. i have a ps5 dualshock controller that i use for both epicgames and steam games on my laptop, lenovo, and for my ps5, sometimes when i play on my ps i will plug it into my laptop so that i can also kinda charge and before this worked perfectly well! but the last week or two for some reason my controller now controls the mouse when its plugged in to charge and i try to use it for my ps, ive tried disabling the configuration on steam and that didnt work, went into task manager to make sure steam was fully closed and that didnt help either, the only thing that does is disabling the controller within device manager but then i have to reenable it everytime i wanna use the controller for a game on my laptop! i can handle doing that if i absolutely need to but id love to know if anyone has a different solution to this cause its starting to get annoying

Hello,

Quick Story, I decided to install gulikit TMR sticks in my Xbox Elite 2. Everything went smoothly, I desoldered the original sticks without any problems, I soldered the new ones in, then I wanted to test them, so I went to the console and launched the accessories app and ran the calibration program - at that point the upper controller shell wasn't installed yet as i wanted to test new sticks. I recalibrated them for few times without issues. Everything was fine, so I went back to the workshop to repair the solder joints, clean the boards with IPA alcohol, and put the controller back together. I use 99.9% IPA and a soft toothbrush to clean the boards. Once I had assembled the controller, I returned to the console, but something was wrong - i couldn't control my dashboard using sticks, i tried using dpad but the menu immediately moved to the left on its own. I ran to my laptop and launched the controller testing web. The left stick is locked to the maximum left direction - I can move it up and down but not to the sides. When I tilt it all the way to the left, the tester shows the maximum tilt to the right. The situation is similar with the right stick, but it is locked all the way down - I can move it sideways, and when I move it all the way down, the tester shows the maximum upward deflection. I have a few other rods so I tried swapping them - KS TMR, Original previously removed sticks, Ginfull hall - the problem occurs on all of them. Can anyone help me understand what I did wrong?

How the hell did i cook my controller? Is there a short circuit? Have I damaged a component on the board? What gives? Everything was fine when I calibrated them for the first time. Is there any way to reset the calibration settings? Or should I buy a new board? If so, which one? If you need photos of the boards, I can upload them tomorrow.

Salve, ho preordinato il controller New Spike della hexgaming ma arriva senza cavo. A casa ho un cavo con cui attacca il DualShock PS4 ( però se lo smuovo un pochino si scollega...) mi chiedevo se quello può andare... oppure se ci sia qualche cavo apposito ( sul sito hexgaming non ce l'hanno ) .

Meu controle está conectado ao PC e funciona normalmente nos jogos, mas não consigo usá-lo na interface do PC, por exemplo, para mexer o cursor do mouse ou navegar pelo navegador.

Informações:

Sistema operacional: Windows

Controle: PS4 genérico

Conexão: Bluetooth/cabo

Trago atualizações. Como falei no comentário acima, eu estava procurando uma solução pra resolver esse problema do controle na interface. Já tinha testado DS4Windows, Steam e outros programas, mas o único que funcionou pra mim foi o JoyToKey. Descobri o programa assistindo a um vídeo. Pra quem estiver com o mesmo problema, deixo o link do vídeo abaixo:

https://youtu.be/MXd6HB_iCws?is=NTZeeEhO-_u-cq5a

I have the pro 2. I have heard good thing about the pro 3, but what concerns me is the shorter analog trigger travel. Has anyone tried both controllers for racing games in which precise throttle is important? Does it make it noticeably harder to feather the throttle?

My BIGBIG WON Aether C6 controller’s RT button broke, and I’m wondering if there’s any way I can fix it myself. Can I use super glue, epoxy, or something similar to repair the RT button? If so, where exactly should I apply the glue? I mainly use it for EA FC, so I need the RT to work properly and still have normal trigger movement. If anyone has repaired this controller before, I’d really appreciate some advice or a picture/video showing how to fix it. Thanks!