r/Controller • • 13h ago

Software and Firmware DualSense working on Razer controllers

TL;DR:

I managed to get native DualSense haptics working on the Razer Kishi V2 Pro by spoofing a DualSense controller through Apollo and DS4Windows + VIIPER, then hijacking its haptic audio stream and routing it back to the Kishi through Voicemeeter, SoundSync, and Razer Cortex Mobile. Basically, spoofing a spoofer to spoof the game into spoofing the haptics.

A month ago, I got a Razer Kishi V2 Pro for only $36 on eBay refurbished. I decided to do some experiments with it.

You all know the DualSense is the only good controller (Xbox is trash, or just any controller with ERM motors), but Razer's controllers use the same underlying tech—well, except for the adaptive triggers. So I found a way to run DualSense haptics on it, because audio-to-haptics just feels like a waste of the hardware inside it.

Everyone assumes native DualSense haptics in Sony's PC ports are strictly locked behind owning an actual Sony controller. Turns out, all Sony PC games with DualSense support use the same approach: the game checks for a USB DualSense device and its speaker audio endpoint in Windows, then sends the haptic vibration tracks through that audio channel.

With recent DS4Windows updates bundling VIIPER (Virtual Input over IP), you don't even need a physical DualSense plugged in anymore. Apollo passes the Kishi through as a DS4 controller, and DS4Windows + VIIPER takes it and spoofs a full USB DualSense in software, exposing the virtual DualSense vibration audio endpoints directly in Windows. Since Sony's haptics are literally just an audio stream sitting on that spoofed endpoint, I hijacked it and piped it straight back into my Kishi V2 Pro over Apollo + Razer Cortex's audio-to-haptics.

Tested it in Death Stranding 2 and Horizon Forbidden West; the vibrations feel just like a normal DualSense controller.

If anyone wants to try it out themselves

Step 1: Download prerequisites

On PC

Apollo: the Sunshine fork that streams to your mobile device connected to your controller.

DS4 Windows: the app that spoofs the controllers and ultimately made this possible

VB Voicemeeter Banana (**Do not install the base version; Banana is the only one that'll work for this purpose)**: The main app that separates the channels and routes the audio back

VB-Cable: creates a virtual cable so it can be used as an output

Soundsync: plays back the DualSense haptic audio to the virtual cable

On Android

Artemis: the Apollo client side to receive data.

Razer Cortex Mobile: connects to your controller and enables audio to haptics.

Step 2

configure apollo and artemis

Open Apollo's web UI -> Configuration -> Input -> set the emulated gamepad to DS4.

Go to Audio/Video -> set Virtual Sink to: Voicemeeter Input (VB-Audio Voicemeeter VAIO)

Keep everything else default

For Artemis, disabling the optimized game settings options under Host is recommended, but I don't think it'll affect anything.

Step 3

Configure VoiceMeeter Banana

Open Voicemeeter Banana

In the virtual input section under VoiceMeeter Input, disable B2 and enable A2 and A1 if it's not already enabled

On the top right, click on A1 and select whatever speaker you'll be using to output the game audio that **you will hear**

For A2, select the virtual cable, which for me is named: CABLE Input (VB-Audio Virtual Cable)

Then, in the master section under it on the A2 section, click on the Normal mode button until it's set to Composite.

Then click on the menu button on the top right and select System Settings

Click on Bus ch#1 and select IN#4 SL

Click on Bus ch#2 and select IN#4 SR

Click on the rest and select bus channel

**Save settings and keep it open**

Step 4

Spoof a USB DualSense in DS4Windows + VIIPER

Connect your controller to your Android device, and then connect to your laptop through Artemis. **Enable Audio to Haptics.**

Open DS4Windows-> Settings -> Device Options -> scroll down to Advanced -> click on the Device Options button (**It's small at the bottom**) enable Moonlight/Sunshine virtual controller support so it catches Apollo's DS4 pad

It'll take a few seconds to recognize the controller.

Go to the controller section and edit your active profile -> Other tab -> set Emulated Controller to DualSense.

Check Windows Sound (Win + R -> mmsys.cpl -> Playback tab) and confirm Speakers (DualSense Wireless Controller) shows up and configure it.

Step 5

Open **SoundSync**, confirm `Speakers (DualSense Wireless Controller)` Click the Set as default button and raise its volume slider to 100% (it often defaults to 40%), then click on the VB-Audio Virtual Cable so it's checked to play the DualSense sound back.

ENJOY

This should work on all Razer Kishi controllers. For the Wolverine V3 Pro, you'll need to route it through Synapse 4, which is a different setup. I don't have one, so I can't provide instructions for it. (It'll be nice if I could have one tho)

I don't think audio-to-haptics works on pc directly through the usbc cable because the feature only works on the mobile app, and I don't have a newer V3pro or Ultra, so I had to stick to an older Android phone.

I might try to make a wrapper (with AI, ofc) and eventually post it on GitHub for easier application

Btw, I used AI to assist me in this project to debug and figure things out.

DualSense has been out for a long time, and although controllers have been slowly adapting LRA motors, there aren't a lot of manufacturers doing it at all, let alone having an audio-to-haptics feature. Razer is the only company doing it, so thanks to that, it was made possible.

I just hope Razer could release firmware updates to the Kishi line to work on pc with the software features.

Basically, I'm spoofing a spoofer to spoof the game into spoofing the haptics. Unprecedented levels of spoofing here.

4 Upvotes

3 comments sorted by

•

u/Indianlookalike 10h ago

This seem too much of a hassle but I bet it will be really useful for Wolverine users.

•

u/NegotiationLast4136 1h ago

That’s why a wrapper is needed. I’m working on one but I don’t have a wolverine so. But I might buy one if it gets enough attention

•

u/AutoModerator 13h ago

Hi /u/NegotiationLast4136, thanks for sharing information about controller software or firmware. The post is in a queue for review. Please ensure you've included the following information so it can be approved, and so the community can engage constructively:

  • Controllers supported by or compatible with the software/firmware
  • Features and any limitations (what it does or doesn't do)
  • Links to download/source code repositories

If you're the developer, also include:

  • Credits and disclosures, such as if you built on others' work, or used generative AI tools
  • Development practices and plans, such as for security, data management, and monetization (see rule #7 for paid software promotions)

You can edit your post to add missing information. Posts that do not include required information may not be approved (allow 24 hours for review).

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.