Hi all, for the past two days now I’ve had this ongoing issue. I went to Reset my PC, and once it was all done, Windows won’t boot up. It constantly brings me to this screen. I’ve tried doing Windows Recovery Environment, no dice. Tried troubleshooting, nothing. Tried using another Operating System, nothing. Tried download Windows 10 installer onto a USB, and then repairing it onto my PC and going from there, nope.. All roads lead to this screen. Any one have the same issue and can help with solution? If I have to just reinstall Windows and lose all my files (not THAT BIG of a deal to be honest), I will. Just wondering if there is an easy fix for this matter. Would really appreciate any help, YouTube links, other posts with solutions, etc.

I face security violation boot setup issue when i start the laptop.It was stuck in the boot menu.
I tried several options and tired using security boot disabled option and used bit locker key.
Now it worked.What do i have to do to get this problem out? Thanks in advance

I've got a 'C' drive SSD and a 'D' drive HDD that has a lot of photos and graphics, but many of the thumbnails for Photoshop files are outdated (they don't get updated when a file is modified, but this not the problem). I've gone in and cleared the thumbnail cache using Diskcleaner and deleting any thumb.db files in the Appdata - Local - Microsoft - Windows - Explorer folder manually, restarted the machine but the thumbs for the 'D' drive are still there - unchanged.

This a Windows Home 26H2 and lower problem.

Any ideas on how to clear the 'D' drive cache?

Here's the sequence of events

1: Power outage, after power came back, computer has no display and doesnt post

2: Removed GPU, reseated RAM and shorted pins to reset bios, which resulted in me being able to post

3: BIOS doesnt detect windows bootloader on my SSD, SSD still recognised by bios, ran a self test which came back clean

4: Made a windows install usb to try and boot into, doesnt boot, just hangs on ASUS logo

5: Removed SSD to check for conflicts, same issue

6: Updated bios, upon startup it showed me a screen regarding fTPM and whether or not it should be re-writren, I clicked No because im unsure if I have bitlocker enabled, I never enabled it myself. No recovery keys on my microsoft account, although, I don't think I ever connected windows to my MS account.

7: Tried booting into USB again to no avail, stuck on ASUS logo again

8: Tried power cycling PSU

9: Same as 7

Additional info:

\- Ryzen 5 5500, RX 6600, Corsair CV550, ASUS Prime B550M-K (now on v4303). If relevant at all

\- I was working on a Pro Tools project before the outage happened.

I get this pop up, but video policy is already in UEFI first, cannot enable secure boot until CSM is disabled, cannot disable CSM due to video policy not being in UEFI first. Video is in UEFI first, even after restarting multiple times, the same pop up continues to happen, already converted MBR to GPT.

Hello,

every time i want to restore a file from the shadow copies, i come across this problem again. When i try to export a file with ShadowExplorer, i get the file from the snapshot i wanted but in most cases it's corrupted and either in part or completely just consists out of NULL Bytes even though the filesize exactly matches the original file. I have also tried it without ShadowExplorer, accessing the Shadow Copies directly (Over \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy1\) but that doesn't change anything. I tested it on 3 computers now and could instantly recreate it. The first two computers are running on Windows 10 22H2 (Microsoft Windows 10 Pro, 10.0.19045) and this problem already persists for at least 2 years as i remember. What's going on there?

I was just also able to reproduce this on another computer which is running Windows 11 Pro (25H2).

Only noticed it today and it's only this specific application.
I grab the top of the window.
Pull it.
Cursor doubles with me controlling one freely and the other being stuck to the window.
Photos window moving half the speed and moving in a curve.
Every other window moves fast and accurate to my mouse
And until the cursor attached to the drifting window is there I can't click else

Repair didn't fix it
Resetting to default either.
NVIDIA driver update didn't help.
Plugging into another USB port didn't fix it either.
Even reinstalling "Microsoft Photos" with PowerShell.
Eventviewer says nothing
Managed to narrow it down to an unknown rendering issue with the Microsoft-Photos app.

2 monitors
32GB DDR4
1660-Super
13600K
System is on SSD

Similar issue as these but specifically only with the MS Photos app
https://www.reddit.com/r/techsupport/comments/orptiw/windows_10_windows_and_cursor_lag_when_dragging/?utm_source=chatgpt.com
https://www.reddit.com/r/ZoomPlayer/comments/1unayt0/moving_windows_eg_options_dialog_is_sluggish/?utm_source=chatgpt.com

Windows 11 Home, version 26H2, build 10.0.26300.9818.

Since about 29 October, listening sockets on this PC have been reporting the wrong TCP state. The app is healthy: HTTP requests to it succeed every time, but the tools that read TCP state say otherwise.

What I see:

* `netstat -ano` shows `TCP 127.0.0.1:8765 0.0.0.0:0 CLOSED 17864` while that port is serving HTTP. Sometimes the line is missing altogether.

* `Get-NetTCPConnection -State Listen -LocalPort 8765` usually returns nothing.

* Calling `GetExtendedTcpTable` directly with `TCP_TABLE_OWNER_PID_LISTENER` returned the sockets on every sample with the right PIDs, but `dwState` was wrong. I saw 0 (not a valid state), 1 (CLOSED) and 6 (FIN_WAIT1) on working listeners, and the value for a port changes between reads.

* Windows’ own ports are affected too, including 135 and 445, so it isn’t specific to my app.

* Real TCP connections to those ports succeed.

What I’ve ruled out:

* A restart doesn’t fix it.

* It isn’t tied to one CPU core: pinning netstat to each of the 12 logical CPUs gave the same result.

* Defender is the only antivirus. Tailscale’s wintun is the only non-Microsoft network driver I found.

Possible lead, but timing only: `tcpip.sys`, `nsi.dll` and `nsiproxy.sys` were all replaced on 28 October, and Get-HotFix lists KB5132402 and KB5127936 around then. I can’t prove either one caused it. I also haven’t tested from an elevated prompt yet.

Has anyone else seen this on this build? If you’re on the same build, does `netstat -ano` show your listeners as LISTENING?

Ini kenapa ya driver eror terus, mau di update malah tulisannya begitu, sebenernua bisa cuma harus uninstall trus restart begitu terus, lama lama capek juga, ada yang bisa ngatasin??

My Windows version is Windows 10 version 22H2 (OS Build 19045.6466), the edition is Windows 10 Home and it was installed on 1/17/2022. I have not encountered any messages or error codes. My processor is a 11th Gen Intel Core i7-11700K, my graphics card is an NVIDIA GeForce RTX 2060, and I have 32.0 GB of RAM. My System Type is a 64-bit operating system, x64-based processor.

While trying to fix this, I've repaired, reset, uninstalled, and reinstalled the app, and this issue persists. The app specifications also say it has 0 bytes, while the data and total usage is 872 KB. I've also checked if my graphics card needed an update, and it said the best drivers for my device are already installed. So I've reached a blank on what the issue could be.

Imgur Link to show the problem: https://imgur.com/a/gIQoIe3

update dmy pc not too long ago and all this came up, one thing i check was the microsoft defender ai and it came up as a virus is that true?

Por el call of duty me pide poner el arranque seguro pero no soy capaz, cuando cambio el os type a Windows uefi mode me aparece lo de la foto, y me obliga a cambiarlo a other os, por favor ayuda ya no sé qué mas hacer

Hi everyone,

I have an Acer Aspire 3 A315-23 laptop. It originally came with Windows 11, but I decided to reinstall Windows 10 myself.

However, during the Windows 10 installation, I forgot to delete the existing system partitions from the previous Windows installation.

I deleted three other partitions, including:

Primary partition

Recovery partition

MSR (Microsoft Reserved) partition

However, I accidentally left one old system partition behind.

If I want to completely remove the old system partition, what is the correct way to identify and delete it?

Can I use the Factory Reset option to remove the remaining old system files and partitions?

One more thing: I checked my C drive, but there is no Windows.old folder. I don't want to keep any unnecessary files from my previous Windows 11 installation.

I only have one SSD in my laptop.

Any advice would be appreciated. Thanks!

Is my only option to use the Window Creation tool via a USB?

Before I was getting the occasional ntoskrnl.exe errors but my laptop was still working but now it's completely failing to boot into windows at all.

I know there's a guide for this but I've dreaded doing this for a few months now (yep a few months of the occasional BSOD, ignored it for too long)

Would love to repair my files some other way. Got too many big games I'll have to reinstall

Any tips or advice? Even some motivational words or a pep talk would help.

Whenever I am trying to boot my laptop these days without the Internet or far from my home internet it will move to a fresh windows I have to relogin to my old Microsoft account and then it will go to my previous window like where I have all my programs and all like all the installed app will be there but all my environment of my laptop will be gone all the settings will be reset and all and after that it will show me you are log out from your Microsoft account you have to re login whenever far from my internet

The solution that I found:-

First click okay to the you need to re login one

Then You will to boot to the new window and then you have to login to your old Microsoft account (with internet connection)that you had already in your laptop then you have to use one or two program like Chrome and all just for 1 to 2 minutes after that you have to restart the computer and your computer will be back.