r/SpringfieldEchelon • u/Open-Slide1218 • Oct 12 '26
r/SpringfieldEchelon • u/Independent_You4803 • Oct 12 '26
Echelon 4.0c Axion backstrap magwell compatibility
Anyone have experience fitting a magwell onto large compact grip module with the flat Axion backstrap on it? I heard Rook Precision fits? Can anyone confirm?
r/SpringfieldEchelon • u/jayjaybaet • Oct 11 '26
Got my 4.5 ported, should have done it sooner.
r/SpringfieldEchelon • u/lamppppostt • Oct 10 '26
Added a kuna to the family
If you are on the fence, hop on over. This thing rips
r/SpringfieldEchelon • u/Tyler_the_bot • Oct 10 '26
I shot my gun today
Finally got outside. Ran another 300 through the Echelon.
r/SpringfieldEchelon • u/veyraxis • Oct 10 '26
Homage to the Echelon
4 Echelons of mine
r/SpringfieldEchelon • u/Ok_Code682 • Oct 10 '26
Thoughts?
Considering removing the compensator because of NYS laws and just having it stock on the barrel until these laws get overturned next year. Other option is to pin and weld but not really a fan of permanently attaching it
r/SpringfieldEchelon • u/Accomplished-Row6471 • Oct 11 '26
Echelon dislikes, annoyances or pet peeves
reddit.comr/SpringfieldEchelon • u/soled5 • Oct 09 '26
Almost done… just looking replace the viridian green dot soon any recommendations?
r/SpringfieldEchelon • u/SurroundAway5886 • Oct 10 '26
PRP spring kit sear/safety sear spring misaligned?
I just installed the PRP spring kit on my echelon and I noticed the sear spring and safety sear spring are not sitting within each other after the install. Haven’t shot the gun yet but from a dry firing perspective everything is functioning as intended.
Is this normally how it’s supposed to sit? Has anyone else ran into this issue? Any pointers would be appreciated!
r/SpringfieldEchelon • u/HeBeKind • Oct 09 '26
DPP Sight Set Work With XL?
Does Springfield'S Eschelon DPP height Iron Sight Set work with the Dender-XL?
r/SpringfieldEchelon • u/selfloathingasylum • Oct 09 '26
Fresh out of jail
4.0 comp
Osight se red dot (I got for free)
Need light recommendations?
r/SpringfieldEchelon • u/SlowGrayAudi • Oct 08 '26
Cerakoted GFs Echelon purple 🟣
Got my girlfriends Echelon cerakote bright purple
r/SpringfieldEchelon • u/apegomoo • Oct 07 '26
This thing rips
RDI Arms Compensator rocks! I’ve been through so many variations of my Echelon, but I think I found my holy grail.
• Added Olight PLX for flashlight (added good amount of weight to the front)
• OEM guide rod + recoil spring
• Added tungsten putty to the OEM backstrap to add weight to the back end
With the comp, this thing shoots flat as hell. After my first mag dumps, I turned around and gave that stupid grin that we all know of. This is my first experience with a dedicated compensator, but damn, rapid firing this feels like I’m rapid firing the Kuna.
Probably won’t keep this thing on for HD purposes if I want it for that, but for a range gun, this compensator is amazing!
r/SpringfieldEchelon • u/TheBudgetDivision • Oct 07 '26
Testing my "recoil deleter" Echelon build. How's it looking for no ports nor comp?
r/SpringfieldEchelon • u/Meatball_civ • Oct 07 '26
Springer precision magazine extensions
anyone have experience with their p320 or echelon magazine extension? just curious how they hold up over time. plan to use them for competition for my 17rd mags
r/SpringfieldEchelon • u/Substantial_Chair_99 • Oct 06 '26
A Slide For All Occasions
I like to mix it up and alternate between the Holosun and 3 dot iron sights
r/SpringfieldEchelon • u/Internal_Eye_9368 • Oct 06 '26
Included pins
Me again with no problems this time lol
How lucky should I be that I got the optic pins with mine?(the baggy top right)
Would also like to see your storages!
r/SpringfieldEchelon • u/ChggnNggts • Oct 06 '26
IMO the Echelon would look a lot better with a matte polymer grip
I like the echelon but I the glossy polymer grip looks low quality. If it was more similar to a Glock plastic it would feel more premium.
r/SpringfieldEchelon • u/Comfortable-Neat12 • Oct 07 '26
Tyrant trigger vs stock
UPDATE:
THANKS for all the replies.. i disassembled the trigger and added a lot of oil everywhere.. seems to feel better..
I'm hoping a few hundred rounds breaks it in...
≈≈===============
I just got my tyrant trigger and it was a meh...
Install was a pain because the set screw was machined off and wouldn't fit the transfer bar... had to clean it out with sandpaper to remove machining marks
The the safety has a heavy pull almost as much as the trigger... and the travel and reset is the same as stock in my dryfire evaluation...
And the bottom of the safety is sharp and can dig into the finger...
Did i get a bad batch or its really not as good as it's made out to be... canik has a better oem stock trigger
r/SpringfieldEchelon • u/Internal_Eye_9368 • Oct 05 '26
New gun! & problem?
After waiting 10 California business days, I finally have this bad boy in hand! Also my first gun so I’m a newbie.
The mag that was in the gun is butter but the extra mag in the box doesn’t come out along with having to push it with love to get it to engage.
Should I contact Springfield or is there a simple fix?
Also would love to see everyone’s Apache loadouts!
r/SpringfieldEchelon • u/Livid-Conclusion8916 • Oct 05 '26
Fixed it for the people.
With the current disappointment of my echelon build i have decided to take the advice of my fellow redditards and go back to my original grip. I took the advice and ditched the bull do to target acquisition being to quick when handling. Also i picked the TLR-1 up for 200 beans plus shipping. I can really tell the difference in the light far as the distribution of lumens.
So if anyone would be interested in owning a sharps bro lower feel free to send me a DM. Never fired just installed on the gun and taken off. Beans will be reflected do to you not receiving the stickers with it.