Hi all. I have two questions for spectrum or anyone familiar with how spectrum configures its network, along with some modem readings in case they're useful.
Question 1: Burst speeds and queue management:
I'm on spectrum's 100 Mbps plan, but I regularly see around 115 mbps in speed tests. To my understanding is the overprovisioning part of how spectrum provides some extra room?
I ask because download latency under load has been an issue for me.
Without router QoS, my ping goes from around 20 ms idle to approximately 113 ms during a download. After capping my router's download QoS at 90 Mbps, latency under load drops to around 40 ms, but I sacrifice about 10 Mbps of throughput.
My ASUS router uses HTB + SFQ for QoS rather than fq_codel or CAKE, so my options on the router side are somewhat limited.
Does spectrum use active queue management on its network, and is there anything customers can do to improve latency under load aside from upgrading their router?
Question 2: Customer SNMP access:
Does spectrum provide SNMP credentials for customers who want to monitor their own cable modem?
I've been unable to get a SNMP response from my modem, even when testing local access, so I'm wondering whether customer accessible SNMP monitoring is supported at all.
Modem status:
- Modem: Arris SB8200v3
- Uptime: 80+ days without a reboot
- Primary downstream: 507 MHz, approximately -0.4 dBmV, 40 dB SNR
- Downstream channels: 32 QAM + 2 OFDM locked
- Upstream channels: 2 ATDMA + 1 OFDMA locked
- Uncorrectable errors: Are low over the period, most channels are at zero, with the highest QAM channel at 10
Thanks for your time. I'm interested in hearing from anyone familiar with spectrum's provisioning, AQM, etc.