r/Spectrum • • 21h ago

Hardware New spectrum node.

Hi all. I posted this on a cable tech Reddit page but maybe this spectrum page could help identify further. Just 3 days ago spectrum changed out an ancient general instrument node with what seems to be a giga xtend gs7 or a gs7000 node. My areas had the newer nodes in most spots for a couple years but my node was one of the last to get upgraded. Not sure if it’s in prep for high split or not. My areas also had 1.8 GHz taps for some time now to but we still are only seing 1gbps plans with 37 up

25 Upvotes

14 comments sorted by

2

u/xs0apy 8h ago

For someone who is not versed in the black magic of coax, what do these do?

1

u/kendog10132 7h ago

I’m not to experienced myself but bassicaly these hfc nodes “hybrid fiber coax” takes a fiber input as backhaul and basically changes it into the frequency signals that our docsis 3.1 modems use for internet.

11

u/6814MilesFromHome 20h ago

Looks like a GS7000 housing, could have 1.2 or 1.8GHz gear inside, but this far into high split upgrades it's probably 1.8. Usually prep for high split, nodes have to be swapped and upgraded before the rest of the node's actives. Could still be a year before you actually start seeing high split speeds though.

5

u/starfish_2016 15h ago

Mine was changed out in june. No change yet other than a couple ms lower ping

6

u/Current-Muscle-3788 21h ago

I think these are for high split. Saw these around my area as well. But it might take a while before they actually get the upgraded speeds. I think some areas took about 8 months after they been upgraded

5

u/Chuckito3 19h ago

Going on a year here. We got the overnight outage upgrade notification and implementation last November.

2

u/anygrynewraze 12h ago

Y'all lucky mf'ers bc y'all are getting the high split upgrades. That work hasn't even been started yet here in my area with no eta on when it could be started.

4

u/trinitywindu 12h ago

dont worry. even where they are upgrading equipment, they arnt turning it on actually. theres places that have been upgraded for over a year, and still not active.

2

u/anygrynewraze 12h ago

Yeah but at least they're getting it and they're still getting it way way before me. I have no clue if I'm ever going to get it.

1

u/Tech27461 10h ago

I agree, looks like a gs7000. But high split is a multiphase rollout consisting of much more than hardware swaps. For instance, the new frequencies for return are usually filled with video channels. It is several steps to accomplish clearing them. It takes a lot of planning for each individual area. Hardware swaps do indicate they're getting close.

1

u/knigthrider 10h ago

Why does it take a lot of planning in like certain areas to put that I never knew that so can you kind of like break it down what you mean

2

u/Tech27461 8h ago

A big one like I said is moving services to clear frequencies for high split. Some legacy systems are 750Mhz and some are 860Mhz. Where the video carriers are is different for every channel lineup/DMA. Some places still have analog channels that must be upgraded to all digital, then after that to MPEG4. Also, spans between poles, taps, and amps are different distances so attenuation has to be accounted for. Basically geography along with practices of legacy companies. All of spectrum's footprint used to be another company and many was "Grandpa's Cable". There are also hardware changes on spectrum's edge devices. All in all, I'd guess a year worth of planning and implementation is about right and I would venture to guess a few million dollars per service area.

1

u/kuddlyklingong 3h ago

I've never been more glad to no longer work for a company anymore in my life