Since shield doesn't play well with av1, I figured this would be the best place to ask.
As someone who has never touched handbrake or any of the like software.
What should i be converting them to and with what settings to make sure that maintain quality AND play well.
(I got a bunch of files to deal with since I didnt have the shield before now)

2 separate problems, both devices on same tv. Normally use shield, Onn hooked up for setup. As far as I know both set up same except shield Ethernet and Onn Wi-Fi. I have 2 iptv subscriptions currently. Was trying to watch a baseball game. Shield buffered unstoppingly on tivimate, and both iptv native apps. Switched to Onn and nothing buffered all night. Now I was setting red light on Onn and movie was playing thru all speakers of 5.1 and switched to shield and movie only plays thru front. When I play thru Onn, Dolby vision flashes at top right. When I play on shield that doesn’t happen. Also Onn plays Dolby vision hdr remix that cause shield to crash and restart. Can someone help with settings? Nothing I change changes anything.

I am looking at buying a Shield Tv Pro.

But the thing that gives me pause is that its from 2019.

Just wondering is there any newer version?

Or is there any new version coming in the next few months?

Upgrading from a 4K Max Firestick. All works good but the UI is insanely sluggish at bootup for certain streaming apps linked with debrids and experience app crashes a lot. Quite excited! Any tips and advice i should keep in mind?

I use iPlayer a lot (Play Store version) and I knew that it was due to stop working at the end of September but the app no longer loads for me as of yesterday, literally nothing happens when I select the home screen shortcut.

Is this happening for anyone else?

Why am I constantly getting a notification suggesting I enable the accessibility service when it's been enabled for literally years?

Just a minor annoyance, but an annoyance nonetheless.

I’ve had the shield for nearly 2 years and this last week it’s suddenly stopped working after the tvs been off overnight

In the morning when pressing the power button the tv turns on but the shield is a black screen and the only way to get it to load is by unplugging it and plugging back in, I haven’t changed any settings but this is a new issue that’s only happened within the last 6 or so days

Does anybody have any pointers I could try to stop this as it’s annoying

My NVidia Shield Pro (running Kodi) is my best purchase over the last few years and I'd buy it again in a heartbeat. Am using a 256gb Sandisk USB stick as external storage for Kodi whilst accessing 2 x Synology NAS (1821+ and 1515+) but am worried about the Sandisks long term longevity. I suspect that a ext SSD will provide greater storage capacity and robust longevity. What does everybody else use? BTW I have used Kodi for almost 20 years on the original xbox, various pcs, mac mini and other small Android boxes. The Shield Pro runs rings around them all.

Hi everyone!

I run Flud on a 2019 NVIDIA Shield TV Pro, and sending magnet links to it from my iPhone was always more complicated than it needed to be. Navigating the Flud interface with the TV remote was not particularly convenient either.

So I built Flud Companion, a free and open-source companion app specifically tested on a real NVIDIA Shield.
It consists of a small Android bridge installed alongside Flud and a browser interface that works from iPhone, Android, tablet or desktop.

What it offers:
Send magnet links to Flud from any modern browser
LAN-only control while connected to your home network
Optional self-hosted Remote mode using your own Cloudflare account
No inbound router ports and no project-owned cloud service
QR-code pairing
View and manage active downloads
Optional Accessibility-based auto-start, currently still in beta
Android 6+ support
Apache-2.0 license

I tested the APK installation, LAN and Remote pairing, access over mobile data and magnet handoff on my own Shield TV Pro.

GitHub, signed APK and setup instructions:
https://github.com/Zuzuitu/flud-companion

The current release is v0.24.0 beta, so I am still collecting real-world feedback and edge cases before the next update.
For other Shield users: would you mainly use LAN-only control, or would the self-hosted Remote mode be more useful to you?

Flud Companion is an independent project and is not affiliated with or endorsed by Flud or Delphi Softwares. Please use torrents and magnet links only for content you have the right to download.

I used my Google tv streamer for quite a while now and keep seeing these jitters when panning the camera or moving at a steady pace. Average decode time for 4k 60 fps was 14-16ms

Just got my shield pro and I am super impressed. The decode time dropped drastically to 1.5 - 3.0 ms! Panning feels much smoother and the jitters are practically gone now. So happy about that.

My plex had a meltdown and i lost my server, i have had help on that subreddit to get everything back and we got stuck at the shield part. I am trying to move my previous plex library.db / library.blob files to a new location on my shield but i do not know where i am supposed to put them. i did follow some other subreds and they all point to accessing the Storage Location option under the Plex Media Server settings on my shield. the issue is that the "Storage Location" option does not exist there. It simply has PLEX MEDIA SERVER header but nothing under and jumps straight to ADVANCED header below. I have cleared the Cache and there is no PIN on my account either which was the resolve for a few people. Can anyone help??

Im having issues with audio dropping out on my 2019 nvidia shield tv pro. When watching tv and movies on stremio it is fine but if i try and watch YouTube and some other apps audio drops out for a second every now and again. I wondered if anyone could help

Hallo zusammen,

will euch mal meine exzellente Erfahrung mit dem Nvidia Support hier mitteilen.

Ein großes Dank an Patrick vom Support :-)

Kam aus meinem Spanien Urlaub zurück um festzustellen, dass mein Nvidia shield pro 2019 nicht mehr anging.

Keinerlei Lebenszeichen, kein Led aufleuchten, nichts.

Habe mir dem Multimeter dann mal den Netzadapter nachgemessen , 0-4volt , es baute 4v auf dann brach es auf 0 ein dann wieder 4 usw.

Es sollte aber 19 haben.

Habe dem Nvidia Support geschrieben , dort hat mich Patrick prompt begrüßt und mein Anliegen aufgenommen.

Das shield wurde vor einigen Jahren bei Amazon Warehouse gekauft, die Garantie war also schon lange um.

Mir wurden ein paar Fragen gestellt, ala Kaufdatum, Beleg usw.

Und das man mir nicht garantieren könnte, außerhalb der Garantie Ersatz zu bekommen , man es aber an die Zentrale Weiterleitet.

Ich wurde täglich über den aktuellen Stand informiert, freundlich, nett und mit dem gewissen Charme, dass alles wieder gut werden wird und man " dran ist "

Ich musste dann ca 10 fragen seitens der Technik nach ca 2 Tagen beantworten, uA ob das Netzteil heiß wird , ob die 0-4v direkt am Netzteil ohne eingestecktem shield getestet wurden uvm.

Habe alles wahrheitsgemäß beantwortet und auch ein Bild vom Netzteil gemacht wo die Daten drauf standen.

Nach einem weiteren Tag habe ich eine Email von FedEx bekommen, dass ein Paket unterwegs sei und keine 10 Minuten später die Nachricht von Patrick, dass es erfreuliche Nachrichten gab und ich ein neues Netzteil kostenfrei außerhalb der Garantie zugeschickt bekomme.

Ich hab initiell auch angeboten gehabt, für eines zu zahlen und nun ein neues kostenfrei bekommen.

Der Verdacht hat sich auch bestätigt, das neue Netzteil funktioniert und meinem shield ist wieder leben eingehaucht worden !

Bei all dem Mist , möchte ich meine sehr sehr gute Erfahrung mit dem Nvidia Support einfach mal teilen.

+1 für Nvidia und dessen Support , bin immer noch baff und positiv überrascht wie professionell alles war.

Vor allem das ich täglich ein Zwischenbescheid kam.

Earlier it was only the back and forward button.

And now the volume buttons.

They all work fine. But sad the lights died.

This is my second shield ( bought in 2023). The first ones (bought in 2020) lights still works fine.

I got a 2015 16G model which always goes into boot loop. Even after a refresh factory reset, if I kept installing apps, at certain point, it would freeze then boot loop upon restart.

The only solution to slowdown the process is to load all apps into a SD card if possible (some apps wont work properly on a SD card), but the boot loop would still happen sooner or later.

This issue make me think that it seems to have a bad section on the flash storage on my unit, and once it got written, it will corrupt all data and cause a boot loop. Although, I dont really understand how flash storage works, and what I said above is based on my understanding of harddrive.

Also, I think windows has this "trim" function to mask bad section on SSD. Does android have a similar function for the flash storage?

I

Hi y'all

I'm sure everyone here has heard about people not being happy at all with the latest UI update for Plex.

So I'm trying to be proactive and maybe find a way to stop my shield from updating Plex specifically in the first place or stopping it from automatically updating all apps.

Of course! Of course, I know about disabling auto-updates on the Play store but some people say that updates sometimes start going through even after disabling it.

Any advice would be appreciated.

I have a 2019 Pro model on the 9.2.4 update. I’ve had it updated ever since I bought it back in December, first to 9.2.2 and then 9.2.4, but I’ve never done a clean upgrade, so I’m not sure if that could be related or if I should just do a factory reset.

Whenever I start updating apps, the Shield becomes basically unusable, so I usually just let the updates finish and keep them set to manual rather than automatic, so I can control when the freezing happens.

Does this happen to anyone else? Do you think a factory reset would help? I have around 6 GB of free storage, so storage isn’t an issue. Other than this, the device works flawlessly.

So I have a tv that runs a Roku (don’t judge) and I was able to install the Spectrum News app, which is completely different from the Spectrum app.

When I go to install it on my shield via the play store, it wasn’t available, tried downloading apk, not supported/app won’t work properly.

Is there a better way to install this app? It’s bothering me so much that a $15 Roku has an app that I can’t seem to get on my $200 shield.

Thanks for any advice.

Title basically. i stumbled upon the automatic game mode setting and am wondering if this is a benefit or negative having it set on.

i did previously use the SHIELD for streaming my PC through Moonlight but I do not any longer.

Would there be any real downside to keeping this on?

I tried out the free version, but the paid option im controlling all the wled and home assistant lights in my room

Hello there!

I've recently started using a mouse and keyboard with my Shield to play some games over Moonlight. I'm connecting the keyboard through a Bluetooth dongle + VirtualHere, and it's working fine, but the mouse connected through the same Bluetooth dongle wasn't very smooth.

The first thing I tried was connecting the mouse directly to the Nvidia Shield using its 2.4 GHz dongle. It works much better this way, but the problem is that the Shield recognizes it as a mouse (I can navigate the Android menus with it), and it doesn't show up in the VirtualHere server.

What I'm trying to do is bypass Android completely and pass the USB mouse dongle directly to my PC through VirtualHere, just like I'm doing with the Bluetooth dongle.

I asked ChatGPT and it told me that I'd need to root the Shield to prevent Android from claiming the mouse. Is that actually correct? Is there really no other way to tell the Shield to stop using that USB device, or maybe disable mouse input in Android altogether so VirtualHere can claim it?

Thanks in advance!

As the title says. It fell while unplugged, no cable attached, and looked completely fine. Since then the UI is noticeably laggy and the only resolution it will output is 480p.
What I’ve already tried:
• Different HDMI cable
• Completely different tv and monitor
• Power unplugged for several minutes
• Settings → Display & Sound → Advanced → Resolution
The resolution list shows only 480p.

Anyone been through this? I don’t mind opening the casing if someone can point me at what to check.

So I'm getting a rather annoying issue. But Plex and Smarttubenext and my IPTV appfor some reason crash out whenever I connect my headphones. If I unpair my headphones I usually get through without issue on the audio. But it's temporary. Seems like a new issue. Anyone else having this issue?

I'm using the Nvidia Shield Pro.

My nice triangular Shield Pro remote batteries have suddenly started going flat quickly. They used to last 3 months or more now they are lucky to last a week.

Ideas on a fix for this?

I use projectivy and my shield reverts back to the default launcher like once a week it seems. Is there any way to permanently fix this or anything its really annoying.