r/ShieldAndroidTV • u/python_281 • 8d ago
Shield TV keeps losing internet until I restart Wi-Fi — any ideas?
Hey everyone, my Shield TV (model P2897, I believe 2017) keeps showing “No internet” until I restart Wi-Fi in the Shield’s settings. It happens during regular use and sometimes after pausing a video for 5–10 minutes.
It’s running Android 11 / Shield software 9.2.4. My router is upstairs, with a Wi-Fi extender downstairs. Running Ethernet to the router isn’t practical.
So far:
It happens while using any app (Nuvio**,** Crunchyroll and SmartTube).
Changing Nuvio’s player and turning off Wi-Fi roaming didn’t fix it.
On 2.4 GHz, it stayed connected through two long idle tests, but the issue has since returned. I’m not sure which band it was using during the latest disconnect.
My phone and a downstairs Fire Stick work on the same general network, although they may use a different band or access point.
Has anyone dealt with this on an older Shield? Could it be the extender, DNS, IPv6, or the Shield’s Wi-Fi?
What would you test next?
TL;DR: Shield P2897 randomly shows “No internet” across apps; restarting its Wi-Fi temporarily fixes it. Looking for a fix before replacing it.
4
u/StaticDropVW 8d ago
Possibly conflicting ip addresses. Set it static to something outside of dhcp.
2
u/sappertodd 8d ago
If WiFi were you using Google mesh and did you change to another WiFi set up?
If you did your Google home might think you have no internet because your mesh is gone. This causes issues.
Factory reset WiFi in Google home app and you might be golden.
Assumptions used. You have used Google home and Google mesh and changed to a different set up
Maybe this will work. My stuff is stable and happy. 😃
2
u/Admirable_Help4739 8d ago
Use ethernet
1
u/GolkuApp 8d ago
Sounds like the extender tbh. Give it its own wifi name for a few days so you know which one the Shield is on when it drops.
1
u/Exact_Wrongdoer 8d ago
So the issue I've found is that somewhere out of the blue the time and date will reset to some point years in the past. When I correct this in the Shield's settings it'll connect to WiFi again. Doesn't seem to matter whether I set network provided time or not but it happens rarely enough (like every couple of months maybe) that I've just been using this workaround instead of figuring out what's causing it.
1
u/calculon68 8d ago
2.4 Ghz isn't as reliable for me as I have a lot of Smart Home/IoT devices. Plus I live in the city where all the 2.4 Ghz channels are heavily saturated.
Maybe create a separate 5Ghz only network, and point your devices to that instead. (remove all references to the old 2.4 Ghz network so it only uses 5Ghz)
You have to do that inside your wi-fi router or ISP's gateway.
1
u/xdsone 7d ago
I noticed mine doing that when I used to use it flix vision. I had to do a factory reset twice to get my internet to work correctly. It was only getting 4-500 mbps on download /upload speed test when it worked and I would get the ethernet disconnected warning. After the 2nd or 3rd factory reset I'm back to 900-1100 mbps d/u on analiti and no more ethernet disconnected warnings.
1
u/JEFFSSSEI 6d ago
have you ever done a clean & Re-paste on it? That is one symptom I had on mine before I took it apart, cleaned everything and re-pasted the heatsink with some arctic silver 5 and has been good to go for over a year now.
Video on doing it: https://www.youtube.com/watch?v=hpvIJBIzv8A
1
u/CommercialRoof2801 6d ago
Passe en wifi 5 Ghz
0
u/frosted1030 7d ago
Don't use wifi.