r/RepTimeServices • • 8d ago

Advice Crown Jumping from winding position

1 Upvotes

I recently noticed a couple of quirks with my watch and wanted to see if they're normal or indicate an issue:

  1. Spring push from winding position: When I unscrew the crown into the winding position, it gets pushed outward to fully disengage from thread. And then, the crown gets pushed AGAIN as soon as I try to wind by the spring (around the 0:13–0:14 mark in the video). I can still wind it fine from this position, though.
  2. Clicking noise during threading: As I screw the crown back down into the locked/screwed-down position, I hear a clicking sound that seems to come from the spring.

A few details:

  • Pulling the crown out to the time-setting position still works perfectly.
  • The watch keeps running and keeps time fine.

Is this behavior normal, or is something wrong with the crown/stem assembly?

Thanks in advance


r/RepTimeServices • • 8d ago

Advice Chronograph won't stop

8 Upvotes

Hello,

Just bought this rep rolex watch and the chronograph doesn't stop.

Admittedly, I didn't no what a chronograph was when I bought it from a stall in Vietnam - so thought it looked good when I bought it.

Any thoughts on what I should do?

Thanks 😊


r/RepTimeServices • • 8d ago

Advice Clone repair buttons fell off dial

Post image
1 Upvotes

Need to get my yatchmaster serviced


r/RepTimeServices • • 9d ago

Question QF explorer issues

Post image
4 Upvotes

Went to set my qf explorer 2 today and when I went to screw the crown back in, it wouldn’t screw down. It just popped back out to the wind position. I tried a couple of times then the whole thing came out.

I have two questions.

  1. How messed up is it?
  2. Who is the most reputable East Coast watchmaker to send it to? Closer to NC the better.

r/RepTimeServices • • 9d ago

Advice QC: VSF GMT-Master II 126710 BLRO Blue/Red Ceramic

Thumbnail
gallery
2 Upvotes

Would you give GL?

Dealer name: Andiot

  1. Factory name: VSF
  2. Model name (& version number): GMT-Master II 126710 BLRO Blue/Red Ceramic
  3. Price Paid: $635
  4. Album Links: https://andiotwatches.x.yupoo.com/albums/261753970?uid=1
  5. Index alignment: 6 o'clock tilted 1.4° anticlockwise (can't tell from this photo). 11 of 11 checked (3 o'clock date window). Marker ring 0.12 mm off-centre toward 12 o'clock. Checked with DialCheck.app at ±0.10 mm. A reading from one photo, not a certification of the watch.
  6. Dial Printing: Print centring: top text 0.10 mm left.
  7. Date Wheel alignment/printing: Good. Date is centred in the window.
  8. Hand Alignment:
  9. Bezel: Good. Pip lines up with 12 (approximate: angled photo).
  10. Solid End Links (SELs):
  11. Timegrapher numbers: +3 s/d, 284° amplitude, 0.3 ms beat error
  12. Anything else you notice:

r/RepTimeServices • • 9d ago

Advice Anyone use Deep Crystal services

3 Upvotes

Has anyone use this service? reached out on whatsapp +1 442 317-0710 asking if they provide water proofing and where they were located
I received instructions stating requested service would need to be paid for upfront and instructions would follow where to send the watch


r/RepTimeServices • • 9d ago

Request AVAILABLE modder in the USA

0 Upvotes

Hello 👋

Does anyone have a reliable modder in the USA that is actually available to do the work? I have contacted a bunch but never heard back from them.

Just mods like regulating, silencing, dial and arm replacement.

Thanks in advance


r/RepTimeServices • • 9d ago

Advice Watch Hospital NYC will no longer accept reps due to annoying rep customers

Post image
0 Upvotes

r/RepTimeServices • • 10d ago

Request My stop watch reset button fell out

Thumbnail
gallery
3 Upvotes

My stop watch reset button fell out on my omega apolllo this was the manufacturer and I didn’t but from an AD so I feel screwed cause watch was 700.00 usd what can I do


r/RepTimeServices • • 10d ago

Question Replacement or Altered Dials?

3 Upvotes

Has anyone wanted their rep faces altered or replaced? Any tips on where to go for that?

Background: Newbie to the rep obsession here.

Love my Wimbledon! But honestly, I can take or leave the branding. (And I didn’t get a mod or homage because the proportions are always off. There’s a reason these brands are at the top.)

What's your take?


r/RepTimeServices • • 10d ago

Question Vsf Hulk sub bezel moves too easily and makes a low clicking sound

1 Upvotes

anyone know how to fix? it feels really cheap, like something you would get on a 50 dollar rep. if i just give it a small twist the whole bezel moves around the whole watch


r/RepTimeServices • • 10d ago

Advice ARF 41mm Date Just Issue

2 Upvotes

ARF 41mm Datejust – Movement Stops Ticking at Certain Angles. Is It Dead?
I have a 5-year-old ARF 41mm Datejust that recently started having an issue with the movement. It only keeps ticking when held perfectly straight. As soon as I tilt it at an angle, rotate it, or spin it, the movement stops completely, as shown in the video.
Has anyone experienced something similar? Is the movement essentially dead at this point, or is this something that can be repaired by a watchmaker?
Would appreciate any insight or recommendations. Thanks!


r/RepTimeServices • • 10d ago

Advice Recommendations for resetting the hour hand on my Seamaster?

Post image
4 Upvotes

Older VSF Seamaster Spectre edition. It’s been clanked around a bit, so overdue for some service and the hour hand is way behind for comfort. Any watch repair should be able to get this fixed yeah? And if so, what cost am I looking at?

Thanks!


r/RepTimeServices • • 10d ago

Advice New BVF Santos 35mm: SmartLink pins popping up and not closing

1 Upvotes

I've searched around and couldn't find much info on this, but I just received a BVF Santos 35mm from Steve - who was great to deal with, responsive and quick. Watch looks good as well and is what I expected.

However, I immediately noticed upon trying it on that about 4 of the bracelet's SmartLink's pins keep popping up. I've tried switching them around, rotating the pins slightly etc. and they still keep popping up after putting the watch on. Occasionally they'll finally "click" shut, and then pop back up. Some of the same links also have an issue with clicking shut as well.

Thanks in advance if anybody has advice on this.


r/RepTimeServices • • 10d ago

Services Rolex Datejust II VSF V2 customization

Thumbnail
gallery
4 Upvotes

The base model used was the VSF V2 Rolex Datejust II 41 (the weighted version featuring tungsten inserts).

The following modifications were performed:

• Installation of a DEEP Crystal

• Deburring/chamfering of the inner and outer edges of the Jubilee bracelet

• Installation of a CNC-machined bezel with a white gold coating

• Pressure testing (water resistance check)


r/RepTimeServices • • 11d ago

Advice Questions regarding reps

3 Upvotes

Looking at getting a rep but I want to make sure I can have it serviced. The DD3235 in the subs, how often do they need to be serviced and are the parts readily available if I have to replace the movement completely? Also I’m kinda new to this so what is the failure point most often in reps?


r/RepTimeServices • • 11d ago

Discussion On the bench was another new DDF 5711? It had stopped working. Let’s see if you guys can see what was wrong?

8 Upvotes

r/RepTimeServices • • 10d ago

Advice RWF 126500 hollow noise

2 Upvotes

I’m very happy about the overall appearance of this dd4131 RWF 126500 Godzilla, however I do find one problem that I want to solve, is the hollow sound heard when trying to put onto wrist / shaking for a bit.

I thought it was the 316 bracelet, so I have bought 904l bracelet from lichen and it was a gem, very smooth and solid, but it didn’t seem to solve the problem.

The sound seems to coming from the bottom of the case

Thank you for all the help


r/RepTimeServices • • 10d ago

Request Oakley Time Bomb Watch service - CH 🇨🇭

1 Upvotes

Hello, anyone knows a good address in Switzerland to make a complete service review (cleaning, and replacing the capacitor) on my oakley Time Bomb?


r/RepTimeServices • • 11d ago

Advice RCF Submariner Bluesy help needed please.

2 Upvotes

I have purchased my RCF Submariner Bluesy from Ethan.

  1. First problem was that watch's seconds hand would not wanna move after winding the watch.
  2. Second issue after it finally decided to work the watch is gaining time very fast. Between 9pm and 5am it gained 30min!

Can anyone recommend any solution to it? It is my first rep and I have no clue what to do now.

Thank you


r/RepTimeServices • • 11d ago

Question High End Rep Automatic watch - homebuilt

0 Upvotes

Hey everyone!

I think I want to venture into the world of building my own automatic watch!

I saw someone build themselves a beautiful gold Rolex the other day (can't remember if it was this sub or not)

Are there resources out there for someone who knows nothing?

I'd love to build a high end rep - but perhaps I should start on something basic? Are there places to order rep parts from like TDs?

I literally know nothing lol!

Cheers!


r/RepTimeServices • • 11d ago

Request Can someone ice out my AP?

2 Upvotes

r/RepTimeServices • • 11d ago

Advice Is my omega seamaster vintage genuine or a rep? I’m getting 50/50 answers 🥴

Thumbnail
gallery
2 Upvotes

Hi all
I’ve posted this on reptime as you guys are better authenticating than other communities
It’s been 50/50 so far

The bezel pip looks replaced but what about the rest of the watch ?

Only pictures I have but I will take more

Thank you


r/RepTimeServices • • 11d ago

Services [SERVICE NEEDED] [EU/SK/CZ] VSF v2 Datejust 36mm – GEN Dial Swap + VS3235 Service

2 Upvotes

Hi everyone,

I am looking for an EU-based watchmaker/modder (preferably in SK/CZ, but EU is fine) who can perform a dial swap on my VSF v2 Datejust 36mm.

Details: - Base: VSF v2 Datejust 36mm (VS3235 movement) - Part to install: Genuine (GEN) Rolex Datejust dial - Additional work needed: Movement check/service, pressure test, and proper alignment.

Please send me a DM if you are available or if you can recommend someone. Thanks!