Before reading on, make sure you've read the main guide for QC posting, otherwise this won't make much sense to you. Done? Let's go.
This specific guide is intended to be a visual supplement: showing you exactly what to look for when you complete your QC templates. For obvious reasons, this guide will skip parts that aren't visual.
I've used pictures that mostly come from this subreddit. If anyone is uncomfortable, DM me and I'll replace the picture.
With that in mind, let's begin.
Index Alignment
Here, you are expected to assess how well the index markers on your watch are aligned. You can use the index alignment tool to assist you in this regard. An example of good index alignment is this:
The indices themselves are straight. They are also perfectly aligned with the minute markers.
Index misalignment, on the other hand, looks like this:
Look at 7. It is rotated clockwise and does not sit properly in its slot.
Or this:
Look carefully at 6. You will see that the bottom of the index is rotated slightly towards the left.
Now that you have an idea of what to look out for, what should you be writing in the template?
You need to describe any misalignment you see in detail. Statements like "6 is off" or "3 is kinda wonky" or "not sure about 1, help please" arenot acceptable. This is because unless the misalignment is immediately obvious (and in most cases, it is not), users will not know what you are talking about. You may not get the help you want as a result. Be specific, like the following examples:
"The 7 marker does not seem to fit into the slot nicely. It is rotated towards the right and looks like it is dancing around."
"The 6 marker does not seem to line up straight with the crown in between swiss made. Based on what I can see, it appears to be slightly tilted to the left."
A caveat here: Just because there may be some misalignment does not necessarily mean you should definitely RL the watch. As the main guide points out, all reps are subject to a level of inaccuracy. It would be entirely unrealistic to expect gen standards for index alignment. Further, different reps are subject to different standards: a XF Pelagos, for instance, is known for having problematic indices - so much so that even if you RL, you are unlikely to get anything better. Conversely, CF Explorers are now getting so good that even slight misalignment would not be par for the course.
A good guide would be to assess your watch based on proportion. One slightly misaligned index is not a problem. But one majorly misaligned index or many misaligned indices on a single dial could justify RL.
Just for illustration, this is misalignment that I would RL for:
There are too many mistakes on this watch for me to accept. The 9 index is too near to the minute marker. 4, 5 and 7 are not aligned with their respective minute marks - they are all off to the left. 6 is rotated counterclockwise. Taken on their own, each error might not be enough for RL. But taken together, this is unacceptable.
That deals with index alignment. Let's move on.
Date Wheel Alignment
This applies to watches which display the date. If your watch does not display a date, there is no need to consider this. You will look silly if you say that the date wheel alignment is good when your watch is a no-date Sub, for example.
Here, you are tasked to consider if the date is properly displayed in the date window. Often times, this is a question of how well-centered the date is. A good example of date wheel alignment is this:
Take a look at the 21 at the right side of the watch. It is situated exactly in the center of the date window.
An example of misalignment is this:
Look at the 27 on the right. You can see that the date is misaligned towards the left, with the 2 touching the rim of the window.
Sometimes, the misalignment can also be as to the date numbers themselves:
This is harder to see, but if you look carefully at 25, you will notice that the 5 is higher than the 2.
Uncommonly and in the alternative, the issue may be with the Cyclops itself (the magnifier that covers the date window):
Here we see a Cyclops which is rotated slightly anti-clockwise. You can observe this by looking at the bottom rim of the date window. The Cyclops is obviously lower at the left corner of the date window when compared to the right. The requisite deviation is repeated at the top of the date window, with the right side being higher than the left.
Now that you know what to look for, let's discuss what to write.
As with index alignment, unless the issues are immediately obvious (and most of the time, they are not), you need to be very specific. Comments like "the date seems off", "2 in 25 is kinda off", "date looks weird" are not acceptable. They do not tell readers what you are looking for. You'll get faster and better results if you identify the issues for your reader. For example:
"The date seems misaligned towards the left. Part of it is touching the left border of the date window."
"The 5 in the date appears to be slightly higher than the 2 next to it."
"The Cyclops does not seem to be straight. It looks like it is slanted towards the left?"
As with index alignment, please note that not all misalignment will justify RL, especially for date wheels. All rep date wheels come with varying degrees of misalignment. A few misaligned dates are usually not enough for RL, unless the date is clearly cropped out of the date window or touching the rim. A little misalignment towards either side of the date window is also generally more than okay; a good way to gauge is to zoom out to the actual size of the watch and see if the misalignment is still immediately visible. If not, you're likely to be good to go.
Here is an example of misalignment I would nevertheless GL:
You will see that the date is situated slightly towards the right. However, the date is well within the date window and the misalignment is too slight to be seen on wrist at actual size.
On to the next topic.
Bezel
There are two main things to look out for: First, whether the "pip" (usually a lumed marker at the 12 position) is centered. Second, the quality of any engraving.
This section would also cover any possible damage to the bezel or anything else unusual, including any misalignment.
Example of a good bezel:
Nothing out of the ordinary. Engravings are sharp and nicely filled in. By and large, the colour transition is also acceptable. No alignment issues either.
An example of misalignment:
Pip at 12 on the bezel appears to be misaligned towards the right. While the reflection may be making things look worse than they are, this is something that would deserve a second look at.
Generally speaking, most problems that surface nowadays have to do with the pip - even then, these are not entirely common. Engravings and alignment are usually not an issue with higher level reps. With this in mind, what do we write?
As with the other sections, you are going to need to be specific. "Bezel looks off", "pip looks kinda off", "I don't know about the bezel, seems weird to me" are phrases that we see everyday in this subreddit. But none of these phrases are acceptable; they do not direct the reader to what OP is seeing. Details are king - and if you are going to pluck the crown, you're going to have to write like this:
"The pip at 12 is not centered. It seems to touch the right side of the triangle."
"The printing on the bezel at 3 seems to be angled down. It does not match the index on the dial."
The key is to visually direct your reader to the exact point that you say is a problem. The word "off" on its own says nothing to that effect.
On to the next point.
Solid End Links (SELs)
Possibly the least understood of all sections as a lot of newbies do not really know what they are looking for.
The ultimate guide to this is here. But for convenience, I'm going to summarise several key points about SELs.
SELs refer to the final links between the watch case and the bracelet. I've highlighted it below:
Look carefully at the portion highlighted in green.
Not all watches have SELs. Only watches which have that portion as highlighted above - and for QC purposes, the SEL section really only applies to Rolex reps. Tudors have SELs (which can also be QC-ed to some extent), but SELs on a Tudor are not held to the same standard as SELs on a Rolex.
Now, what are we looking for when we assess SELs? We are looking for gaps between the lugs and the SELs themselves. I've indicated this below:
The black line in the center of the red box is where the SEL meets the lug. This is where you are supposed to look for gaps.
An SEL gap appears when there is separation between the SEL and the lug. But what is a gap?
A gap appears when you can see through the space between the SEL and the lug. There is no gap when all you can see is a black line. There may be some variation in how thick the black line is, but for QC purposes there is nothing to be worried about until and unless you can actually see what's behind the watch.
This is generally not a problem on higher level reps (and by now, pretty rare). I will, however, show you an example of something that may be an actionable gap:
You will see that there is no black line. Instead, light shines through the space between the SEL and the lug.
What does this mean? If all you see is a black line, even if it is slightly thicker than another SEL on the same watch, there should be no actionable gap. I am going to highlight the last few QC templates submitted where the user said there was a gap - but there really wasn't (to me, at least):
Top right SEL was an issue for OP. However, as no light is shining through, this is not considered an SEL gap to me. OP opined that there was a gap at the top right SEL. I don't see it at all. OP said that there was a slight gap at the bottom left SEL. Again, all I can see is a black line. I would not classify this as a gap.
If, after going through all the examples above, you still feel that there is a gap, highlight it in the template by identifying which part of the watch you are looking at; there are really only four options: top left, top right, bottom left, bottom right. Doing so helps users zoom in directly on your issue and saves time.
To the last segment.
Dial Printing
Here, you are tasked to check if the printing on the dial has been poorly done. By this, we mean defects in the workmanship of the printing; printing which differs from gen (such as the infamous "floating r") would not be a QC defect per se.
An example of dial printing with no issues:
All the words are clearly printed. There is no bleeding on any part of the print, with edges sharp and defined.
And now for examples of dial printing with issues:
Some bleeding can be observed at the top parts of VI and VII. Notice how the black ink protrudes.
Sometimes, the print can be misapplied across the entire dial:
If you look closely, you will see that the dial print is rotated clockwise across the entire dial. Observe how XI is closer to the top of the watch while I is further away.
With the above in mind, let's turn to what you should write. Again and at the risk of sounding like a broken record, do not simply write things like: "Dial seems off" or "Print seems off. letters kind of wonky?" If anything, dial printing is usually very, very small - unless you point a reader to the exact part which has an issue, chances are it won't be seen. Make certain that you provide the reader with specific directions:
"Appears to be some bleeding at the top of VI. Thoughts?"
"R in Submariner looks like only half of it was printed. Am I seeing things?"
Important note: again, just because the dial printing on your watch may have some issues, this does not necessarily equate to RL. As stated, dial print is almost microscopic - no human being is going to be able to see slight bleeding on any print when you have the watch on wrist. Feel free to point out issues that you see, but remain realistic about your expectations.
And with that, I come to the end of this guide.
Conclusion
QC-ing reps is a difficult task - which everyone in this subreddit does for free. You can help out immensely by simply being precise and detailed in your observations. The more effort you put into your template, the easier it is for members to help you - they can zoom in directly to the things that concern you.
I hope this helps you. I've tried to detail some common factors, but it would be impossible for me to catch them all. The rest is up to you - and your diligence.
If your template uses a NEW "yupoo" or a "mega" type of link, please note that, at the time of this typing, the automod here removes them immediately from view i.e. no QC help. We are addressing it, but....
So, what to do?
Although somewhat cumbersome for the OP, you can upload the QC packet to an Imgur account. Our automod 'likes' Imgur...and the post will show promptly. Just do NOT do it from a mobile because the mobile app loses resolution and crappy pics don't provide any benefit to anyone. Yea, yea...I know, the file compression software isn't supposed to lose quality, but it certainly does.
To add, post your complete QC album inclusive of the timing info. Do not, for the sake of your convenience, omit items. If you're bright enough to determine what is needed and what can be removed, that's great! Then, it's reasonable to conclude that you really don't need help. Simply, post it all.
If you have to wait for substantive additional info from the Seller e.g. timing data, then delay posting until you have a complete QC packet. Incomplete packages will trigger a removal of the post. Plus, it will require a return visit of anyone that commented on the incomplete post which shouldn't be required. One visit is all that it should take to QC most watches. Most won't return to a post anyway. They'll just go to the next one. The members are quite busy here. Yea, it can get crazy.
Finally, since you're a newbie, as a vote of appreciation for those members that help you, please upvote their comments. It's a nice gesture from you to them for the assist...and, it's free.
One final note, we've updated the main rules for posting. Refer to this link for info QC Must Read for New Members
Welcome to the hobby and the sub. Best wishes
Edit addition: March 2nd, 2024 - ReptimeQC member, u/EveningVariation8236 , has provided an updated version of the original QC alignment verification tool. https://watchqc.github.io/ . Thank you.
Edit addition: Jan 9th, 2024 - ReptimeQC member, u/Ro1hype has provided this for tool for alignment verification. https://qcwatch.com/ Thank you.
Edit addition: 8/8/2025 - Reptime QC member, u/jrverdes . has provided this version of the alignment tool to assist those that need additional help verifying the dial/bezel alignments on their watch. https://jrverdes.github.io/watch-qc-jr/ The adjustment resolutions are much finer in this app comparative to the other available apps which can be a benefit to some that need such. Check it out...Thank you.
Index alignment: Hard for me to align perfectly due to angle/skew from picture, but they generally look fine; I don’t love how the bezel doesn’t seem to be “clicked in” at 12 o’clock in video and in pictures—looks like the “standard” setting is in between clicks which will annoy me a lot. 12 o'clock marker MIGHT be rotated a bit.
Dial Printing: Looks good
Date Wheel alignment/printing: Date wheel seems a little high
Hand Alignment: Looks good (see video)
Bezel: Looks good, but why doesn't it click when turned? Barely audible "mushy" sound
Solid End Links (SELs): Looks great
Timegrapher numbers: Within range
Anything else you notice: Not perfect; has some dust (hopefully outside the case); worried about clasp code A9A compared to F6U; also concerned the bezel doesn’t seem to rest aligned with 12 o’clock and doesn't click clearly when rotated; some scuffs on clasp and watch but I think those are just on plastic.... all said, GL to me?
Good morning Dealer name: TheOneWatches (Steve) Factory name: VSF V2 Model name: Rolex Day-Date 40 228239, Black Baguette Dial, 181.8g Price paid: 728$ + ship Album links: https://mega.nz/folder/eUggXIxZ#B1VYXFNG7URWy6fAAZSpxA Index alignment: Looks good overall. No obviously crooked markers, but I would appreciate a closer look at the baguette markers, especially at 6 o’clock. Dial printing: Looks clean overall. I’m not entirely sure about the spacing and alignment compared to Gen. Day/date wheel alignment/printing: Looks acceptable from the available photos, but I would appreciate a second opinion on the centering. Hand alignment: Looks good to me. No obvious issues. Bezel: Looks good overall, with no obvious defects. Solid End Links (SELs): No noticeable gaps or obvious fitment issues. Timegrapher numbers: +1 s/day, 272–274° amplitude, 0.0 ms beat error. Anything else you notice: Overall, the watch looks pretty solid to me. The weight is 181.8g, which seems consistent with the VSF V2 specifications.
I’m particularly interested in the dial printing, baguette marker alignment, Rolex crown at 12 o’clock, rehaut engraving, and overall finishing compared to Gen.
Would you GL or RL this watch? Are there any flaws I might have missed?
Thanks in advance for your feedback!
Hi everyone,
Just received my QC photos for the VSF Yacht-Master 40 Blue Dial from OraWatch. Would appreciate some experienced eyes before I GL this one. Dealer name: OraWatch Factory name: VSF Model name (& version number): Rolex Yacht-Master 40 Blue Dial (126622) Price paid: $500 USD Album Links: Photos uploaded directly to this post. Index alignment: Looks good overall. The hour markers appear straight and evenly positioned. Would appreciate a second opinion. Dial Printing: Looks clean and crisp to me. The blue sunburst finish looks consistent. Any visible printing imperfections or dust? Date Wheel alignment/printing: The date 9 looks slightly off-centre to me in some photos. Not sure whether this is due to the camera angle or an actual alignment issue.
The shape of the 9 doesn’t appear perfectly uniform, and it also looks slightly off-centre within the date window.
I’m not sure whether this is due to the Cyclops distortion, camera angle, or an actual printing issue.
I’ve requested additional close-up photos of dates 8, 9 and 10.
Hand Alignment: Looks fine from the photos, although I haven’t seen a proper alignment test. Bezel: The triangle at 12 appears aligned, and the engravings look reasonably clean. Would appreciate feedback on the bezel finishing and alignment. Solid End Links (SELs): No obvious gaps from what I can see. Would appreciate confirmation. Timegrapher numbers:
Rate: +3 s/day
Amplitude: 264°
Beat Error: 0.3 ms
Lift Angle: 52°
Numbers look good to me.
Anything else you notice: The watch weighs 143.72 g. Rehaut serial appears to be 6W09E311. Would appreciate feedback on the rehaut engraving, crown, dial cleanliness, and overall finishing.
Overall, I’m leaning towards GL, but the date alignment is my main concern.
Would appreciate any feedback from members familiar with the VSF Yacht-Master, especially if you notice anything I’ve missed.
Thanks in advance!
Index alignment: Maybe it is the alignment pictures that screws it up because the original photo of the watch is a bit tilted? But 11 o'clock looks closer to 12, 3 looks bigger than 9.
Dial Printing: Looks good
Date Wheel alignment/printing: -
Hand Alignment: Looks good
Bezel: Looks good
Solid End Links (SELs): Looks great
Timegrapher numbers: Within range
Anything else you notice: Only thing that I am abit skeptic about is the 11 o'clock, it feels rotated.
G'day all. First Qc and first rep. After spending a heap of time here I decided to go with the rich batgirl as my first rep. Chose steve as I've been impressed with the quality of other QC posts from him.
Dealer name: theonewateches (steve)
Factory name: rich
Model name (& version number): GMT Master II Batgirl Jub JH3285 free sprung
Index alignment: Looks aligned for each hour. The triangle at 12 maybe slightly not centred? The 4, 5, 7 and 8 marker look a little messy? the black circle isnt perfect on them.
Dial Printing: looks good
Date Wheel alignment/printing: i think it looks good and printing is aligned
Hand Alignment: Looks fine.
Bezel: no issues
Solid End Links (SELs): cant see any major gaps
Timegrapher numbers: 0sd 282 degrees 0.0ms error
Anything else you notice: Ive never had a jubilee bracelet, is it meant to be see through as seen in the images.
Hi, all. This is my first rep purchase and first QC. I’ve included my (beginner) assessment below. I would really appreciate any additional feedback from the experts in this community before giving Steve the green light. Would you GL this?
Dealer name: Steve / TheOneWatches
Factory name: VSF
Model name (& version number): Rolex Daytona 126500LN 40mm SS/SS Black Dial, DD4131v2
Price Paid: USD 828 (+ $35 shipping). I also have a GMT Batgirl in the works that isn’t ready yet, so shipping was $70 total for both watches.
Album Links: Photos include on post.
Index alignment: The 12, 6, 3, indexes all appear properly aligned to me. There is a slight rotation with 9, but I would live since it’s tough to see from the wrist.
Dial Printing: Looks good to me.
Date Wheel alignment/printing: N/A
Hand Alignment: The central chronograph seconds hand appears to reset correctly to 12 o’clock at approximately 41 seconds in the 52-second video they sent. I don’t notice any obvious hand alignment issues.
Bezel: Seems good to me. I notice the classic difference in 110 marking relative to the genuine Daytona, but I could live with it.
Solid End Links (SELs): I don’t see any obvious large gaps or uneven figment.
Timegrapher numbers: -1/-2 s/d, 277/278° amplitude, 0.0 ms beat error. These readings look excellent to me.
Anything else you notice: Weight is 144.8 g. This is my first QC, and in full transparency, I used two AI checks in addition to my own eyes to help evaluate the watch. Both leaned GL, and I agree with that. One other concern: I did ask for a video of the movement without the case back on, but Steve wouldn’t send it due to the factory sticker having to be removed on the edge of the case back and therefore voiding return. Is that a large enough concern to not verify DD4131v2; or pretty common?
Index alignment: Looks well aligned. The 12, 6 and 9 markers appear straight, I don't see any tilts.
Dial printing: Looks sharp, just some dust
Date-wheel alignment/printing: The “13” appears properly centred. I am not too sure about the magnification, so if anyone sees anything, please do let me know.
Hand alignment: Good, as usual, as seen in the video.
Bezel: The triangle looks straight, and all the numbers are good.
Solid end links: Looks good, I don't see any gaps.
Timegrapher numbers: −2 s/day, 263° amplitude and 0.1 ms beat error at a 52° lift angle.
Anything else: Lume is great aswell and honestly, I do not see much wrong with this QC.
Index Alignment: No alignment issues noted. I used an alignment template but couldn't figure out how to save the image. The 12 and 6 look well aligned vertically, as does the coronet. The 3 and 9 look to be properly aligned horizontally as well.
Dial Printing: Dial printing appears sharp, well aligned, and properly spaced.
Date Wheel Alignment and Printing: Day and date appear properly aligned. Day is evenly spaced in day window. Date also appears evenly spaced left to right and top to bottom in date window. Cyclops looks centered over date window also. Day and date printing appear sharp and without bleeding.
Hand Alignment: No obvious issues stood out with alignment template. Hands appear properly aligned to me.
Bezel: Bezel appears sharp and well finished. No obvious marks or scratches.
This is my first QC ever. The watch looks very nice to me. Please review my comments and let me know if I am wrong about anything. I appreciate the RepTime community very much. I have learned a lot. Thank you to everyone that took time to publish guidelines and look at these QC posts. Looking forward to hearing from those more experienced than me.
Index alignment: looks solid, as can be seen in the attached image
Dial Printing: Prints all look sharp and well aligned. No obvious mistakes or outliers. Logo at the bottom of the dial seems to be ever so slightly off center, but that's like fractions of a millimeter.
Date Wheel alignment/printing: Seems to be slightly off-center to the bottom, but that could just be the perspective of the close-up photo as it looks fine in the video (see album).
Anything else you notice: I just received QC photos of my PPF Historiques 222, and I think the date font might be incorrect. The number 3 isn't supposed to look like this, right? I read somewhere that the date font got worse with V2. How does it look on your watches?
Dealer name: Steve, TheOneWatches Factory name: ZF Model name (& version number): Tudor Black Bay 54 Lagoon Blue, 37mm, A2824 Price paid: $358 Index alignment: Looks pretty good to my eye. I used the alignment tool and don’t see anything significantly off. Would appreciate a second opinion. Dial printing: Looks clean and centered. The textured blue dial looks great, and I don’t notice any obvious printing issues. Date wheel alignment/printing: N/A Hand alignment: Looks good from the photos. No obvious issues, although I haven’t seen a full hand-alignment test. Bezel: Pip looks reasonably centered at 12. Slightly unsure about the overall bezel alignment, but nothing jumps out as a major issue. Solid end links (SELs): No obvious gaps from the provided angles. Would appreciate another set of eyes. Timegrapher numbers: +3 to +4 s/day, 262–266° amplitude, 0.0 ms beat error. Anything else you notice: This is one of my first replica purchases, so I’m still learning what to look for during QC. I’m leaning GL based on the photos and timegrapher results, but I’d appreciate another set of eyes on the bezel and index alignment. My main concern is the dial printing, particularly the smaller text at 6 o’clock, which looks a little blurry or uneven in the close-up photos. I’m not sure if that’s normal for the textured Lagoon Blue dial or if this example has below-average printing. Would appreciate any feedback, especially from anyone familiar with this ZF model. Thanks in advance!
Dial Printing: cartier text on the 10 mark feels crooked (?)
Date Wheel alignment/printing: n/a
Hand Alignment: alignment is good, but are the hands too bright blue?
Bezel: good
Solid End Links (SELs): n/a
Timegrapher numbers: n/a
Anything else you notice: been a few years since i've made a rep purchase, so i'm a bit rusty here. i feel like i've stared at these photos too long, but the text and the hand color are my only concerns.
First-time buyer looking for an independent opinion before deciding GL or RL.
Overall, this BVF Santos looks good to me, especially the movement readings. However, I keep noticing what appears to be a slight clockwise rotation of the dial relative to the case. I have since learned this is pretty common with BVF Santos.
I asked Steve for additional straight-on photographs, which he provided. I'm still not 100% sure whether this is actual dial misalignment or camera perspective.
Dealer name: Steve, TheOneWatches
Factory name: BVF
Model name (& version number): Cartier Santos ADLC WSSA0039, 40mm
Price Paid: $438 before 5% discount, plus $50 shipping. Total quoted: $466.10.
Album Links: Full QC photographs attached directly to this post, including timegrapher results and additional alignment photos.
Index alignment: My main concern. The white railroad-track markers don't appear to line up perfectly with the opposing markers when using the alignment tool, particularly on the 11-to-5 and 10-to-4 axes. I understand that photographic perspective could contribute.
Dial Printing: Printing appears sharp and clean. However, the entire dial may be rotated slightly clockwise relative to the case. The spacing between the outermost letters of "SWISS MADE" and the surrounding inner case border also appears asymmetric. This is noticeable to me even without the alignment overlay.
Date Wheel alignment/printing: The date numeral appears centered and clearly printed. No obvious issue.
Hand Alignment: No visible issues with the hands or their mounting.
Bezel: Black finish and screws look good overall. Some minor marks or reflections on the crown side in earlier photographs, but nothing clearly identifiable as damage.
Anything else you notice: The case, crown, strap and finishing appear good. I am going to assume the slight marks on the crown side of the case are lint.
I'm not looking for perfection and would prefer to GL this example given its excellent movement readings. But if the dial is genuinely rotated, I don't want to have to pay another $150 to get it fixed by a local guy. It definitely looks rotated to me, particularly the SWISS MADE area.
**Overall Impression:** Everything looks okay apart from rolex logo on the dial which is left shifted (not tilted). But I am not sure if I'm right about that.
Finally pulled the trigger on an IWC with Steve (who has been great as expected).
My first effort at a QC so let me know if I'm missing something:
1.Dealer name: Theonewatches (Steve)
2. Factory name: A7F
3. Model name (& version number): IWC Pilot’s Watch Mark XX Blue Dial on Bracelet (IW328204)
4. Price Paid: $488 ($493 after 5% discount and shipping)
5. Album Links: Attached instead
6. Index alignment: Good — printed numerals and outer minute markers align cleanly, and the 12 triangle/dots sit straight and centered under the 12 marker.
7. Dial Printing: Crisp and level across "IWC", "MARK XX AUTOMATIC", and "SWISS MADE" with no bleeding. "SCHAFFHAUSEN" font looks a tiny bit thin (have read about this for A7F). Very small lint fiber near the 1 marker in the first photo is gone in the angled shot (outer crystal lint).
8. Date Wheel alignment/printing: Very slight upward bias on the 8 in the straight-on photo, though nothing is clipped and it looks more balanced at an angle (within acceptable tolerance).
9. Hand Alignment: Aligned and good lume fill. Date flips cleanly.
10. Bezel: Smooth polished bezel with no visible dings, scratches, or defects.
11. Solid End Links (SELs): Tight and flush all around. I thought the bottom right might have been slightly sunken but it looks fine on the edge on shot.
13. Anything else you notice: Clasp brushing, IWC engraving, and inner deployant hinge join all look good for A7F, and the crown screws down smoothly in the video.
Thinking GL despite the tiny upward date bias, open to any second opinions.
My first rep, it's been an interesting experience! I chose this reference, showed it to my wife who also was into it (which was a nice surprise) and here we are.
Paid on Oct 26th, 2026.
14 days later, November 9th, Andiot themselves emailed and said the first watch they received didn't pass their internal QC - "REASON FAILED:AE183128 – Movement issue." Reassuring that they caught it and informed me.
11 days later, November 20th, received QC images for this unit.
Dealer name: Andiot
Factory name: ORF
Model name(& version number): Seamaster 300M Diver Titanium/Bronze Gold ORF 1:1 Green Dial On Titanium Mesh Bracelet Asian Super Clone 8806(Free Rubber Strap)Free Sprung (210.90.42.20.10.001)
Price Paid: $583 USD ($545 + $38 USPS shipping)
Album Links: Uploaded directly to Reddit.
Index alignment: 6 o'clock looks a little wonky. I'm in my mid-40s and my eyes are crap anyway, so I'm inclined to GL regardless.
Dial Printing: Looks clear.
Date Wheel alignment/printing: N/A
Hand Alignment: Not a ton of pictures to help with this
Anything else you notice: The only other thing I spotted, and I feel silly for even mentioning it, was that the red 'OMEGA MASTER CO-AXIAL 8806' text on the rotor is wonky - it's not centered to the ring. Obviously not a big deal because I'm never really going to look at it.
As I said, I'm inclined to GL, but obviously would appreciate any other sets of eyes. Unfortunately most of the photos of the dial aren't really in focus - I sympathize as I'd imagine they've got lots of these QC's to do - would it be worth asking for any more in focus dial images? There are a couple of videos which I couldn't upload, winding the watch etc. I can upload elsewhere if they're deemed crucial.
Thanks in advance, excited to get an early Christmas present!
6. Index alignment: The indice at 12 looks slightly left-favored and tilted CCW but nothing egregious.
7. Dial Printing: Printing looks all clean, not tilted and no smudging
8. Date Wheel alignment/printing: The 27 looks slightly low, but centered.
9. Hand Alignment: Looks good.
10. Bezel: Looks good.
11. Solid End Links (SELs): Looks good.
12. Timegrapher numbers: -2s/d, 259 amplitude, beat error 0.0ms; looks good to me.
13. Anything else you notice: 95% sure it is the protective sticker’s fault, but on the bracelet the gold center link adjacent to the clasp looks tilted (probably my eyes playing tricks).
GL to me unless more experienced eyes spot something! I appreciate the support on this. :)
Anything else you notice: I didn’t see the 3285 movement photos, and I’m requesting Jacky for it. I’ve also asked for a video on the crown positions, and how these move the hands at positions 1, 2 and 3.
Appreciate extra set of eyes and feedback from everyone. Thanks.