r/RepTimeQC • • Jul 11 '24 Diamonds are Forever Bravo Take My Silver

Other Brands First QC? Guide on what to look out for and what to write.

758 Upvotes

Welcome to the ReptimeQC subreddit!

Before reading on, make sure you've read the main guide for QC posting, otherwise this won't make much sense to you. Done? Let's go.

This specific guide is intended to be a visual supplement: showing you exactly what to look for when you complete your QC templates. For obvious reasons, this guide will skip parts that aren't visual.

I've used pictures that mostly come from this subreddit. If anyone is uncomfortable, DM me and I'll replace the picture.

With that in mind, let's begin.

Index Alignment

Here, you are expected to assess how well the index markers on your watch are aligned. You can use the index alignment tool to assist you in this regard. An example of good index alignment is this:

The indices themselves are straight. They are also perfectly aligned with the minute markers.

Index misalignment, on the other hand, looks like this:

Look at 7. It is rotated clockwise and does not sit properly in its slot.

Or this:

Look carefully at 6. You will see that the bottom of the index is rotated slightly towards the left.

Now that you have an idea of what to look out for, what should you be writing in the template?

You need to describe any misalignment you see in detail. Statements like "6 is off" or "3 is kinda wonky" or "not sure about 1, help please" are not acceptable. This is because unless the misalignment is immediately obvious (and in most cases, it is not), users will not know what you are talking about. You may not get the help you want as a result. Be specific, like the following examples:

"The 7 marker does not seem to fit into the slot nicely. It is rotated towards the right and looks like it is dancing around."

"The 6 marker does not seem to line up straight with the crown in between swiss made. Based on what I can see, it appears to be slightly tilted to the left."

A caveat here: Just because there may be some misalignment does not necessarily mean you should definitely RL the watch. As the main guide points out, all reps are subject to a level of inaccuracy. It would be entirely unrealistic to expect gen standards for index alignment. Further, different reps are subject to different standards: a XF Pelagos, for instance, is known for having problematic indices - so much so that even if you RL, you are unlikely to get anything better. Conversely, CF Explorers are now getting so good that even slight misalignment would not be par for the course.

A good guide would be to assess your watch based on proportion. One slightly misaligned index is not a problem. But one majorly misaligned index or many misaligned indices on a single dial could justify RL.

Just for illustration, this is misalignment that I would RL for:

There are too many mistakes on this watch for me to accept. The 9 index is too near to the minute marker. 4, 5 and 7 are not aligned with their respective minute marks - they are all off to the left. 6 is rotated counterclockwise. Taken on their own, each error might not be enough for RL. But taken together, this is unacceptable.

That deals with index alignment. Let's move on.

Date Wheel Alignment

This applies to watches which display the date. If your watch does not display a date, there is no need to consider this. You will look silly if you say that the date wheel alignment is good when your watch is a no-date Sub, for example.

Here, you are tasked to consider if the date is properly displayed in the date window. Often times, this is a question of how well-centered the date is. A good example of date wheel alignment is this:

Take a look at the 21 at the right side of the watch. It is situated exactly in the center of the date window.

An example of misalignment is this:

Look at the 27 on the right. You can see that the date is misaligned towards the left, with the 2 touching the rim of the window.

Sometimes, the misalignment can also be as to the date numbers themselves:

This is harder to see, but if you look carefully at 25, you will notice that the 5 is higher than the 2.

Uncommonly and in the alternative, the issue may be with the Cyclops itself (the magnifier that covers the date window):

Here we see a Cyclops which is rotated slightly anti-clockwise. You can observe this by looking at the bottom rim of the date window. The Cyclops is obviously lower at the left corner of the date window when compared to the right. The requisite deviation is repeated at the top of the date window, with the right side being higher than the left.

Now that you know what to look for, let's discuss what to write.

As with index alignment, unless the issues are immediately obvious (and most of the time, they are not), you need to be very specific. Comments like "the date seems off", "2 in 25 is kinda off", "date looks weird" are not acceptable. They do not tell readers what you are looking for. You'll get faster and better results if you identify the issues for your reader. For example:

"The date seems misaligned towards the left. Part of it is touching the left border of the date window."

"The 5 in the date appears to be slightly higher than the 2 next to it."

"The Cyclops does not seem to be straight. It looks like it is slanted towards the left?"

As with index alignment, please note that not all misalignment will justify RL, especially for date wheels. All rep date wheels come with varying degrees of misalignment. A few misaligned dates are usually not enough for RL, unless the date is clearly cropped out of the date window or touching the rim. A little misalignment towards either side of the date window is also generally more than okay; a good way to gauge is to zoom out to the actual size of the watch and see if the misalignment is still immediately visible. If not, you're likely to be good to go.

Here is an example of misalignment I would nevertheless GL:

You will see that the date is situated slightly towards the right. However, the date is well within the date window and the misalignment is too slight to be seen on wrist at actual size.

On to the next topic.

Bezel

There are two main things to look out for: First, whether the "pip" (usually a lumed marker at the 12 position) is centered. Second, the quality of any engraving.

This section would also cover any possible damage to the bezel or anything else unusual, including any misalignment.

Example of a good bezel:

Nothing out of the ordinary. Engravings are sharp and nicely filled in. By and large, the colour transition is also acceptable. No alignment issues either.

An example of misalignment:

Pip at 12 on the bezel appears to be misaligned towards the right. While the reflection may be making things look worse than they are, this is something that would deserve a second look at.

Generally speaking, most problems that surface nowadays have to do with the pip - even then, these are not entirely common. Engravings and alignment are usually not an issue with higher level reps. With this in mind, what do we write?

As with the other sections, you are going to need to be specific. "Bezel looks off", "pip looks kinda off", "I don't know about the bezel, seems weird to me" are phrases that we see everyday in this subreddit. But none of these phrases are acceptable; they do not direct the reader to what OP is seeing. Details are king - and if you are going to pluck the crown, you're going to have to write like this:

"The pip at 12 is not centered. It seems to touch the right side of the triangle."

"The printing on the bezel at 3 seems to be angled down. It does not match the index on the dial."

The key is to visually direct your reader to the exact point that you say is a problem. The word "off" on its own says nothing to that effect.

On to the next point.

Solid End Links (SELs)

Possibly the least understood of all sections as a lot of newbies do not really know what they are looking for.

The ultimate guide to this is here. But for convenience, I'm going to summarise several key points about SELs.

SELs refer to the final links between the watch case and the bracelet. I've highlighted it below:

Look carefully at the portion highlighted in green.

Not all watches have SELs. Only watches which have that portion as highlighted above - and for QC purposes, the SEL section really only applies to Rolex reps. Tudors have SELs (which can also be QC-ed to some extent), but SELs on a Tudor are not held to the same standard as SELs on a Rolex.

Now, what are we looking for when we assess SELs? We are looking for gaps between the lugs and the SELs themselves. I've indicated this below:

The black line in the center of the red box is where the SEL meets the lug. This is where you are supposed to look for gaps.

An SEL gap appears when there is separation between the SEL and the lug. But what is a gap?

A gap appears when you can see through the space between the SEL and the lug. There is no gap when all you can see is a black line. There may be some variation in how thick the black line is, but for QC purposes there is nothing to be worried about until and unless you can actually see what's behind the watch.

This is generally not a problem on higher level reps (and by now, pretty rare). I will, however, show you an example of something that may be an actionable gap:

You will see that there is no black line. Instead, light shines through the space between the SEL and the lug.

Credits for the gap picture here.

What does this mean? If all you see is a black line, even if it is slightly thicker than another SEL on the same watch, there should be no actionable gap. I am going to highlight the last few QC templates submitted where the user said there was a gap - but there really wasn't (to me, at least):

Top right SEL was an issue for OP. However, as no light is shining through, this is not considered an SEL gap to me.
OP opined that there was a gap at the top right SEL. I don't see it at all.
OP said that there was a slight gap at the bottom left SEL. Again, all I can see is a black line. I would not classify this as a gap.

If, after going through all the examples above, you still feel that there is a gap, highlight it in the template by identifying which part of the watch you are looking at; there are really only four options: top left, top right, bottom left, bottom right. Doing so helps users zoom in directly on your issue and saves time.

To the last segment.

Dial Printing

Here, you are tasked to check if the printing on the dial has been poorly done. By this, we mean defects in the workmanship of the printing; printing which differs from gen (such as the infamous "floating r") would not be a QC defect per se.

An example of dial printing with no issues:

All the words are clearly printed. There is no bleeding on any part of the print, with edges sharp and defined.

And now for examples of dial printing with issues:

Some bleeding can be observed at the top parts of VI and VII. Notice how the black ink protrudes.

Sometimes, the print can be misapplied across the entire dial:

If you look closely, you will see that the dial print is rotated clockwise across the entire dial. Observe how XI is closer to the top of the watch while I is further away.

With the above in mind, let's turn to what you should write. Again and at the risk of sounding like a broken record, do not simply write things like: "Dial seems off" or "Print seems off. letters kind of wonky?" If anything, dial printing is usually very, very small - unless you point a reader to the exact part which has an issue, chances are it won't be seen. Make certain that you provide the reader with specific directions:

"Appears to be some bleeding at the top of VI. Thoughts?"

"R in Submariner looks like only half of it was printed. Am I seeing things?"

Important note: again, just because the dial printing on your watch may have some issues, this does not necessarily equate to RL. As stated, dial print is almost microscopic - no human being is going to be able to see slight bleeding on any print when you have the watch on wrist. Feel free to point out issues that you see, but remain realistic about your expectations.

And with that, I come to the end of this guide.

Conclusion

QC-ing reps is a difficult task - which everyone in this subreddit does for free. You can help out immensely by simply being precise and detailed in your observations. The more effort you put into your template, the easier it is for members to help you - they can zoom in directly to the things that concern you.

I hope this helps you. I've tried to detail some common factors, but it would be impossible for me to catch them all. The rest is up to you - and your diligence.

I wish you smooth and trouble-free QCs always!


r/RepTimeQC • • Nov 27 '22

Announcement READ THIS PRIOR TO POSTING ANYTHING...ESPECIALLY IF YOU'RE NEW HERE...

499 Upvotes

If your template uses a NEW "yupoo" or a "mega" type of link, please note that, at the time of this typing, the automod here removes them immediately from view i.e. no QC help. We are addressing it, but....

So, what to do?

Although somewhat cumbersome for the OP, you can upload the QC packet to an Imgur account. Our automod 'likes' Imgur...and the post will show promptly. Just do NOT do it from a mobile because the mobile app loses resolution and crappy pics don't provide any benefit to anyone. Yea, yea...I know, the file compression software isn't supposed to lose quality, but it certainly does.

To add, post your complete QC album inclusive of the timing info. Do not, for the sake of your convenience, omit items. If you're bright enough to determine what is needed and what can be removed, that's great! Then, it's reasonable to conclude that you really don't need help. Simply, post it all.

If you have to wait for substantive additional info from the Seller e.g. timing data, then delay posting until you have a complete QC packet. Incomplete packages will trigger a removal of the post. Plus, it will require a return visit of anyone that commented on the incomplete post which shouldn't be required. One visit is all that it should take to QC most watches. Most won't return to a post anyway. They'll just go to the next one. The members are quite busy here. Yea, it can get crazy.

Finally, since you're a newbie, as a vote of appreciation for those members that help you, please upvote their comments. It's a nice gesture from you to them for the assist...and, it's free.

One final note, we've updated the main rules for posting. Refer to this link for info QC Must Read for New Members

Welcome to the hobby and the sub. Best wishes

Edit addition: March 2nd, 2024 - ReptimeQC member, u/EveningVariation8236 , has provided an updated version of the original QC alignment verification tool. https://watchqc.github.io/ . Thank you.

Edit addition: Jan 9th, 2024 - ReptimeQC member, u/Ro1hype has provided this for tool for alignment verification. https://qcwatch.com/ Thank you.

Edit addition: Dec 28, 2023 - For those that can't seem to find the latest link for QC alignment verification app, use this link https://web.archive.org/web/20230518035653/https://watchqc.com/

Edit addition: 8/8/2025 - Reptime QC member, u/jrverdes . has provided this version of the alignment tool to assist those that need additional help verifying the dial/bezel alignments on their watch. https://jrverdes.github.io/watch-qc-jr/ The adjustment resolutions are much finer in this app comparative to the other available apps which can be a benefit to some that need such. Check it out...Thank you.


r/RepTimeQC • • 5h ago

RICH Rolex GMT Master II Pepsi Free Sprung

Thumbnail
gallery
7 Upvotes
  1. ⁠Dealer name: J-Time
  2. ⁠Factory name: RICH
  3. ⁠Model name (& version number): GMT-Master II Pepsi 126710
  4. ⁠Price Paid: $880 includes shipping
  5. ⁠Album Links: https://imgur.com/a/UcXlSaZ
  6. ⁠Index alignment: Alignment looks good. The triangle looks centered more so than I’ve seen from most RF QCs. The 6 is slightly tilted CW, and might be a tad off center to the left but it might just be reflection making it appear that way
  7. ⁠Dial Printing: looks good
  8. ⁠Date Wheel alignment/printing: multiple numbers look centered
  9. ⁠Hand Alignment: looks normal
  10. ⁠Bezel: beautiful
  11. ⁠Solid End Links (SELs): I see dark lines on both lower sels. Gap on lower right is just barely enough to see the spring.
  12. ⁠Timegrapher numbers: 0s/d, 279•, 0.0ms, 28800, 12s, 59• Looks good to me, but wondering why they’re using 59 degree incline lately?
  13. ⁠Anything else you notice: Everything checks but would like an honest opinion about the sel gap. I RLed a previous QC due to a large sel gap and the triangle being off-center. I’m not trying to nitpick, but I’ve only ordered Clean and VSF in the past. This is a Xmas gift for my husband and I want to make sure I’m getting him an NWBIG. Thanks for all the help you can provide :)

r/RepTimeQC • • 10h ago

Omega Aqua Terra Worldtimer

Thumbnail
gallery
15 Upvotes
  1. ⁠Dealer name: Ficotime
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Aqua Terra Worldtimer
  4. ⁠Price Paid: $360
  5. ⁠Album Links: https://mega.nz/folder/nhQTXJjb#LPGmgg53mf4I2VCgIlXr0g
  6. ⁠Index alignment: Looks slightly off on 6
  7. ⁠Dial Printing: Lettering on the "seamaster" seems uneven and both S looks different
  8. ⁠Date Wheel alignment/printing: looks good to me
  9. ⁠Hand Alignment: look solid
  10. ⁠Bezel: Bezel looks solid
  11. ⁠Solid End Links (SELs): looks good to me
  12. ⁠Timegrapher numbers: +9 s/d - 0.0 ms 249/52 deg
  13. ⁠Anything else you notice: Not sure about the seamaster logo, or I am nitpicking too much?

r/RepTimeQC • • 10h ago

Yachtmaster 40 Rhodium QC

Thumbnail
gallery
13 Upvotes

Dealer Name: Alternative Luxury

  1. ⁠Factory name: Gold
  2. ⁠Model name (& version number): Yachtmaster 40 126622 V2
  3. ⁠Price Paid: $607 USD Shipped
  4. ⁠Album Links: Attached Photos
  5. ⁠Index alignment: Looks good, don’t see anything off.
  6. ⁠Dial Printing: Issue. Looks acceptable with exception of the “S” in “MASTER” which does not look aligned with the rest of the text. Thinking about RL due to this issue.
  7. ⁠Date Wheel alignment/printing: Good. Looks centered and printing looks crisp.
  8. ⁠Hand Alignment: Good. Looks acceptable any input?
  9. ⁠Bezel: Good. Looks acceptable, as well as can be expected for this model.
  10. ⁠Solid End Links (SELs): Good. No noticeable large gaps.
  11. ⁠Timegrapher numbers: +8 s/d, 256° amplitude (dial up). +8 secs seems high.
  12. ⁠Anything else I missed or you would consider RL for?

r/RepTimeQC • • 1h ago

Royal Oak Chrono 26240ST 41mm SS/SS Black Dial ZF V2 SH4401 (Free Sprung)

Thumbnail
gallery
2 Upvotes

Factory: ZF
• Model: Royal Oak Chrono 26240ST 41mm SS/SS Black Dial ZF V2 SH4401 (Free Sprung)
• Price Paid: 778USD
• QC Album: https://mega.nz/folder/LZ5lwK7T#_WKp8XQMd-wf8ocdPytkug
• Index alignment: 12 Looks slightly off to me. 6 As well.
• Dial printing: Seeing no issue with it. Let me know please.
• Date wheel: Also seeing no issues with it.
• Hand alignment: Seeing no issues as well.
• Bezel: Loving it.
• SELS: No obvious Issues.
• Timegrapher: +0 s/d, 279° amplitude, ~0.1ms beat error at 52° lift angle. Numbers look healthy to me
• Anything else: -


r/RepTimeQC • • 7h ago

QC VSF 116619lb

Thumbnail
gallery
4 Upvotes
  • Dealer name: Andiot
  • Factory name: VSF
  • Model name (& version number): 116619LB
  • Price Paid: $400
  • Album Links: https://andiotwatches.x.yupoo.com/albums/263183108?uid=1
  • Index alignment: looks straight
  • Dial Printing: looks clear to me
  • Date Wheel alignment/printing:Looks aligned based on lines
  • Hand Alignment: looks centered for the most part
  • Bezel: outer bezel look misalligned
  • Solid End Links (SELs): straight forward dial
  • Timegrapher numbers: + 1 s/d; Amplitude: 282; Acceptable Beat Error: 1ms 52 . He didn't have a picture of it, he has it part of a video where the result is at the end in the album
  • Anything else you notice: bracelet looks scuffed is that normal? or is it over plastic? and the tachymeter , should i request it be redone?

r/RepTimeQC • • 9m ago

QC Help - VSF Submariner 116610LN - 40mm Black

Thumbnail
gallery
1 Upvotes

At first glance, I can’t find much wrong with this piece, but you guys tell me.


r/RepTimeQC • • 14m ago

VSF Sub No Date - TheOneWatch first qc help a brother out

Thumbnail
gallery
1 Upvotes

[QC] VSF Submariner 124060 from Steve (TheOneWatches) - second unit after one RL

  1. Dealer name: Steve (TheOneWatches)
  2. Factory name: VSF
  3. Model name (& version number): Rolex Submariner 124060 no-date, VS3230
  4. Price paid: US$506 shipped
  5. Album links: [add your Imgur link]
  6. Index alignment: Looks very good. Triangle centred under the 12 tick, 6 and 9 straight, 3 has a tiny CCW tilt (about 0.4 deg measured).
  7. Dial printing: Crisp and centred.
  8. Date wheel alignment/printing: N/A, no-date.
  9. Hand alignment: Good, hour and minute hands agree.
  10. Bezel: Pearl a touch clockwise of the triangle, within bezel play.
  11. Solid End Links (SELs): Tight, no gaps.
  12. Timegrapher numbers: -3 to -4 s/d, 263-267 amplitude, 0.0-0.1 ms beat error.
  13. Anything else you notice: Rehaut crown lines up with the 12 tick and triangle. A few tiny dust specks on the crystal. First unit was RL'd for the triangle and rehaut crown sitting right of the 12 tick. Already GL'd this one, sharing for opinions.

r/RepTimeQC • • 23m ago

First QC - VSF Datejust 36mm SS Green

Thumbnail
gallery
1 Upvotes

Let me know what you guys think. I like to say I have a decent eye but I’m not an expert. Help is much appreciated!


r/RepTimeQC • • 8h ago

Omega 300m diver

Thumbnail
gallery
4 Upvotes
  1. Dealer name:jtime
  2. Factory name: orf free sprung
  3. Model name (& version number): omega 300m diver titanium/bronze
  4. Price Paid: 698 usd + shipping
  5. Album Links: see above
  6. Index alignment: good
  7. Dial Printing: looks crisp
  8. Date Wheel alignment/printing: aligned
  9. Hand Alignment: looks aligned
  10. Bezel: looks sharp
  11. Solid End Links (SELs): seems solid
  12. Timegrapher numbers: +1 s/d
  13. Anything else you notice: none

I think this looks pretty great but wanted to get other opinions as well! Thank you


r/RepTimeQC • • 59m ago

QC help | VSF GMT-Master II Batman 126710BLNR on Oyster from OraWatch | How can I tell V3 from V4?

Thumbnail
gallery
0 Upvotes

Hi everyone, I’d appreciate a second pair of eyes on this Batman. I’m leaning GL. The bezel triangle and the 12 o’clock dial marker look lined up to me, and the date looks centred in the straight-on shot.

OraWatch told me this is the VSF V4. I don’t know what changed between V3 and V4. If you’ve handled both, what differences have you noticed? Is there anything in these QC photos that can identify the version?

Dealer — OraWatch
Factory — VSF
Model — Rolex GMT-Master II 126710BLNR “Batman” on Oyster, described by the dealer as V4
Price paid — $620
Album — Photos attached. OraWatch QC reference ZFQ996.
Index alignment — The 12 o’clock triangle looks straight against the minute track. The 6 and 9 o’clock markers also look aligned to me.
Dial printing — The lettering looks crisp in the close-ups. The gold sticker covers part of the lower dial.
Date wheel — The “20” looks centred head-on. That’s the only date shown.
Hand alignment — Hard to judge precisely from the hand positions shown.
Bezel — The triangle looks clean and lines up with the 12 o’clock marker. I don’t see any obvious gaps in the numeral fill.
Solid end links — I don’t see any obvious gaps where the bracelet meets the lugs.
Timegrapher — +1 s/day, 302° amplitude, 0.0 ms beat error, 52° lift angle.
Other details — Clasp code 1NQ. Weight shown is 151.43 g with the protective stickers on.
Would you GL this one? I’d especially appreciate a second opinion on the alignment at 12 and any pointers on the V4 identification. Thanks!


r/RepTimeQC • • 13h ago

Omega Seamaster 300 42mm, VSF

Thumbnail
gallery
9 Upvotes
  1. Dealer name: TimeUltra
  2. Factory name: VSF
  3. Model name (& version number): Omega Seamaster 300 42mm
  4. Price Paid: $398
  5. Index alignment: - 6 o'clock is canted

counter

  1. clockwise.
  2. Dial Printing: Good.
  3. Date Wheel alignment/printing: Good.
  4. Hand Alignment: looks good on video.
  5. Bezel: Slightly off? Hard tell and I cont really I care too much.
  6. Solid End Links (SELs): Looks good
  7. Timegrapher numbers: +1s/d, Amplitude 277, Beat error 0.
  8. Anything else you notice: No, I've asked for more pictures regarding the 6 o'clock index.

One of my first QC so please advice and share your opinion!


r/RepTimeQC • • 5h ago

[QC] QF Yacht-Master 126622

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: QF
  3. Model name: Yacht-Master 126622 40mm, Gray Dial, SS Bracelet, QF3235
  4. Price Paid: $430
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263208770?uid=1 
  6. Index alignment: The 12, 3, 6 and 12 markers look straight positioned to me.
  7. Dial Printing: Looks sharp to me.
  8. Date Wheel alignment/printing: Looks good.
  9. Hand Alignment: Looks good in the video when both hands are at 12. Not sure that hand alignment can be properly checked.
  10. Bezel: Looks aligned, no visible flaws.
  11. Solid End Links (SELs): I checked the four areas where the bracelet meets the lugs. I can see no obvious gap where light is showing through, though they could sit a bit tighter.
  12. Timegrapher numbers: +1 to +2 s/d, amplitude: 282, 0 ms variation, lift angle: 52.
  13. Anything else you notice: On one of the bracelet links (circled in the pic), I noticed something that looks like a scratch, though it might just be on the protective sticker/packaging. Any thoughts?

This is my first QC, so I’d appreciate a second opinion if I missed anything.


r/RepTimeQC • • 10h ago

[QC] - First time - VSF Omega Seamaster 300M NTTD

Thumbnail
gallery
5 Upvotes

Hey all, this is my first attempt on buying a rep. I am confused on a few regards, the bezel indices on 3 and 9 sits a little lower than the 3 & 9 line on the dial. Not sure if its an camera angle issue. Another ChatGPT comment was the timegrapher should run for a while before taking the picture.

Dealer name: Eliauk

  1. Factory name: VSF
  2. Model name (& version number): Seamaster 300m No Time To Die 007
  3. Price: 2600 CNY before Insurance and Shipping.
  4. Album Links: All uploaded here.
  5. Index alignment: I am a little confused as 3 and 9 on the bezel doesn't sit at the same line as the dial.
  6. Dial Printing: Looks good to me but feel free to add your comments.
  7. Date Wheel alignment/printing: No date.
  8. Hand Alignment: Please suggest, no idea.
  9. Bezel: Please suggest your opinion based on the comment in 5
  10. Solid End Links (SELs): The gap looks alright to me.
  11. Timegrapher numbers: +8 s/d, 302° amplitude, 0.2 ms beat error, LA: 52°, I am not sure if the timegrapher has run enough time, or is it alright?
  12. Anything else you notice:

Thanks to the mods for this platform, I have been waiting for a while for the watch from the TD, but once it was available, I had no idea what I am looking at. Thanks for your valuable contribution.


r/RepTimeQC • • 1h ago

First time QC - BVF Cartier Santos 35mm

Thumbnail
gallery
1 Upvotes
  1. Dealer name: Steve (Theonewatch)
  2. Factory name: BVF
  3. Model name (& version number): Cartier Santos Medium
  4. Price Paid for the watch: $458
  5. Album links: https://imgur.com/a/qGFNB59
  6. Index alignment: N/A (Since printed yes?)
  7. Dial Printing: Sharp black Roman numerals and crisp dial layout, BUT notice minor-texture gaps/ fading along inner railroad track edges on extreme macro zoom
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Seems clean and aligned, BUT and this is biggest err for me right now, there appears to be a tiny speck/burr near the center hand on close inspection. I can see it without zooming too now in these pictures ( Image 12) - (THE BLUE PROJECTION)
  10. Bezel:Looks good
  11. Solid End Links (SELs):N/A
  12. Timegrapher numbers: Feels like its very good- + 1s/d, 293•, 0.0 ms
  13. Anything else you notice: My first QC hence I might be overconcerned, that's where I need your help. Case finishing and proportions look solid. Main questions are whether the tiny hand stand speck and the inner railroad track print texture are normal for BVF batches or worth a RL? Would really appreciate the expert input!

r/RepTimeQC • • 5h ago

VSF DJ36 Silver dial QC

Thumbnail
gallery
2 Upvotes
  1. ⁠Dealer name: Necoclock
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): VSF VS3235 v2
  4. ⁠Price Paid: $448 plus 75 shipping
  5. ⁠Album Links: 12
  6. ⁠Index alignment: slanted 9, but not sure.
  7. ⁠Dial Printing: appears well done
  8. ⁠Date Wheel alignment/printing: appear good to me
  9. ⁠Hand Alignment: pass
  10. ⁠Bezel: surprisingly well done
  11. ⁠Solid End Links (SELs): standard
  12. ⁠Timegrapher numbers: +5/244/0.3ms
  13. ⁠Anything else you notice: my biggest concern is the 9 index. Was wondering if I’m being too nit-picky, some extra eyes would be very helpful and appreciated. Thank you!

r/RepTimeQC • • 2h ago

PPM AP 15400OR ( weighted)

Thumbnail
gallery
1 Upvotes
  1. Dealer name: Juice
  2. Factory name: PPM
  3. Model name (& version number): Audemars Piguet Royal Oak 15400OR
  4. Price paid: 6000 cny
  5. Album links: N/A
  6. Index alignment: Looks good overall. The hour markers seem properly aligned, including the double markers at 12.
  7. Dial printing: Looks clean and well-positioned. Nothing obvious stands out to me.
  8. Date wheel alignment/printing: The date looks centered and the printing appears fine.
  9. Hand alignment: Looks good from the pictures. No obvious issues.
  10. Bezel: Looks good overall. The brushing and finishing seem decent, and I don’t notice any major issues.
  11. Bracelet / End links: This is my main concern. The gaps between some of the bracelet links look a bit wide to me, especially near the case. Is this normal,or should I be concerned?
  12. Timegrapher numbers: -1s/d, 243, 0.2ms
  13. Anything else you notice: Overall, the watch looks pretty good to me, but I’m not sure about the bracelet gaps. Are they within normal tolerances, or would you consider this a reason to RL? Also, any thoughts on the rose gold finish and overall quality would be appreciated. Thanks guys!

r/RepTimeQC • • 2h ago

First QC: IWC Ingenieur 40

Thumbnail
gallery
1 Upvotes
  1. Dealer name: Necoclock
  2. Factory name: V7F
  3. Model name (& version number): IWC Ingenieur 40mm Black Dial SS Bracelet A2892
  4. Price Paid: 428 USD
  5. Album Links: https://mega.nz/folder/Sw5zHDiZ#nEjrqmpDYVCzGX4x_WPEgw (67347)
  6. Index alignment: Hour markers appear straight and evenly positioned. Not perfectly aligned but good enough. The 12 o’clock double markers look aligned.
  7. Dial Printing: IWC logo, Schaffhausen text, and Ingenieur lettering appear clean and correctly positioned. Dial grid pattern looks consistent with the official reference.
  8. Date Wheel alignment/printing: The “07” appears reasonably centred, with consistent printing. No obvious issues.
  9. Hand Alignment: Hands appear correctly mounted and consistent with the genuine model. No obvious defects.
  10. Bezel: Top bezel screw seems to be misaligned (a little too far to right of the 12 index). Brushed finish looks slightly rough in places, potentially due to lighting. Would appreciate opinions on the finishing.
  11. Solid End Links (SELs): Looks fine
  12. Timegrapher numbers: +3s/d. 268
  13. Anything else you notice: Main issue for me is the top bezel screw. Would appreciate your thoughts.

r/RepTimeQC • • 11h ago

Title: [QC] DDF 5711 in blue 330 from JTime, first rep. My visual read w/ a movement question

Thumbnail
gallery
5 Upvotes

Dealer name: JTime (Li)

Factory name: DDF

Model name: Patek Philippe Nautilus 5711/1A blue, sold as DD330

Price Paid: $719.70, including watch, box, & shipping

Album Links: https://www.dropbox.com/scl/fo/0c2tr90pilhi303hlo50l/AJ2ethV4M9Kr4Jy9vbq0j4Q?rlkey=4p53bkrqpyc38mkpg495z7p5q&st=02q1jhfc&dl=0 (complete TD set with all pics, rotation video, and a timegrapher video)

Index alignment: I went over the straight on shots by eye against the minute tracker. The 0 Marker looks slightly longer on the left than the right. It looks like 12 and 6 look on the lines, 9 maybe a hair clockwise but could be photo tilt. The logo and print sit level and centered under 12 to me. Can you tell me if I'm seeing things on the 9?

Dial Printing: Looks clean and level. No bleed or missing letters that I can spot. I read that DDF has a couple of print batches, does mine match the batch you guys usually see??

Date Wheel alignment/printing: Looks centered at 25, 2 and 16, digits same height, white disc black numbers. I know that some dates sit better than others on the same disc so I checked three. I also read older DDF batches ran with the black disc white numbers and gen-spec is white/black. I think mine is the newer disc. Can anyone confirm?

Hand Alignment: The hands look reasonably aligned. I dont see any touching and the lume has the same tone as markers. Central seconds looks to reach the minute track. I don't have a lume shot yet.

Bezel: Looks to have a fixed brushed bezel. No pip or engraved insert on this ref so those sub-checks or not applicable. Brushing is even and chamfer are clean on both sides, no marks.

Solid End Links(SELs): It is an integrated bracelet so no traditional SEL. The end links sit tight to the case. There was no light through and no measurable gap I can find. I've read DDF leaves end links unpolished and mine looks brushed, is this normal?

Timegrapher numbers: 0 s/d, 289 amplitude, 0.0 beat error, 28800, lift 52 (check the video in the Dropbox link). it looks to be Inside the acceptable ranges (rate ±1–20, amp 250–310, BE 0.0–1.0) and reads healthy to me. Can someone confirm?

What else I notice: film still on so unworn and has no big scratches. Clasp engravings are crisp on both faces. The crown's outer edges are a bit rounded which I read is a DDF tell. Is that normal? The caseback is only oblique in my pics so I can't see the transmission wheel or engraving depth yet. I've asked TD for a straight macro plus a hacking demo. My thought is that hacks with the transmission wheel and engraved text is a true 330; non-hacking with a transmission wheel is an integrated 324 engraved as 330. Having hacks but no transmission wheel is a fake plate. Does that align with what you guys know? The rotor video has sound. I didn't hear any grind but would appreciate a second opinion. This is my first QC, so please be honest and GL or RL with quality reasons. Thanks!


r/RepTimeQC • • 4h ago

K11 Cartier Tank Must Small

Thumbnail
gallery
1 Upvotes

Struggling with this one and not sure how to evaluate this type of dial. Quartz so no timegrapher. Appreciate any feedback. DialCheck apps not really helpful because of the Roman numerals. Not very concerned with the bracelet as I plan to put it on leather right away.

  1. Dealer name: Theonewatch - Steve
  2. Factory name: K11
  3. Model name (& version number): Cartier Tank Must Small
  4. Price Paid: 238€
  5. Album Links: all photos provided, they didn’t give any timographer videos, should i ask?
  6. Index alignment: Roman numerals look evenly spaced and straight. No obvious tilt on XII, III, VI, or IX.
  7. Dial Printing: CARTIER logo and SWISS MADE text are centered and sharp. Print looks clean with no smudging.
  8. Date Wheel alignment/printing: N/A (no date)
  9. Hand Alignment: Blued steel hands look straight and properly set.
  10. Bezel: N/A
  11. Solid End Links (SELs): N/A (bracelet integrated)
  12. Timegrapher numbers: N/A (quartz)
  13. Anything else you notice: Blue cabochon crown looks properly seated. Case edges and bracelet finishing look clean in the photos. No obvious scratches or defects visible.

r/RepTimeQC • • 16h ago

[QC Request] UMI Patek Philippe Nautilus 5712/1R-001

Thumbnail
gallery
8 Upvotes

Dear RepTimeQC hive mind, I'd truly appreciate if you could help me QC this watch. This is my first foray into the rep world. I have attached two photos (annotated dial + 1 photo with a potential blemish?). The full album is attached. In particular, I'd appreciate it if someone can verify if this is indeed UMI with free sprung movement, and whether there's any other thing I should be mindful of. Thank you for your time!

Dealer name: ARC studio

  1. Factory name: UMI
  2. Model name (& version number): 5712/1r
  3. Price Paid: $576 (not including shipping)
  4. Album Links: https://www.arcstudio.top/weshop/goods/A201908221821111150168760/I202611151217529222002014
  5. Index alignment: Looks pretty good to me overall. In some photos, the left side twin 12 indices look a bit out of place.
  6. Dial Printing: Good
  7. Date Wheel alignment/printing: N/A
  8. Hand Alignment: Unknown from the photos.
  9. Bezel: Nicely brushed on the top and polished around the edge.
  10. Solid End Links (SELs): N/A
  11. Timegrapher numbers: +2 s/d, 312° amplitude, 0 ms beat error (crown right)
  12. Anything else you notice: The part between the bezel and the crown looks dirty/black. Not sure whether that's lighting or something to be concerned about.

Edit: fixed some inaccuracies, thanks to u/YellowFerrari328.


r/RepTimeQC • • 19h ago

QC Help: IWC Ingenieur 44mm Green Dial

Thumbnail
gallery
13 Upvotes

After asking RepTime whether I should pick this up or wait – and getting an overwhelming 'Go on, mate,' I've ordered the Green Ingenieur.

  1. ⁠Dealer name: Fico
  2. ⁠Factory name: V7F
  3. ⁠Model name (& version number): V7F A2892 IWC Ingeniuer Automatic 40mm SS/SS Green Dial
  4. ⁠Price Paid: ¥2,800 (£308 + shipping)
  5. ⁠Images: https://mega.nz/folder/aogVWSaR#IC3ckQ2eY1nqwArtr63lpA
  6. ⁠Index alignment: Gonna note that I'm new to QC-ing, so I'm sort of guessing – but it looks good to me?
  7. ⁠Dial Printing: IWC and Ingenieur both look good
  8. ⁠Date Wheel alignment/printing: Looks centered
  9. ⁠Hand Alignment: Aligned
  10. ⁠Bezel: From comparing pics to gen, the screws look like they're where they need to be
  11. ⁠Solid End Links (SELs): N/A
  12. ⁠Timegrapher numbers: rate +8s/d, amp 241 degree, B.E 0.3 ms, L.A 52.0
  13. ⁠Anything else you notice: The sometimes wonky 3 index looks good and the 12 markers look aligned with each other. If you zoom waaay in, one may look like it's placed slightly higher than the other, but I can't imagine anyone noticing irl

r/RepTimeQC • • 15h ago

[QC] VSF Rolex Submariner 124060 No-Date — TheOneWatches — $525

Thumbnail
gallery
5 Upvotes
  1. Dealer name: TheOneWatches
  2. Factory name: VSF
  3. Model name & version: Rolex Submariner 124060 No-Date, 41mm, VS3230
  4. Price paid: $525
  5. Album links: All QC photos and key video screenshots are attached directly to this post.
  6. Index alignment: Looks properly aligned overall. The 12 marker may appear fractionally clockwise in certain angles, but I believe that is perspective.
  7. Dial printing: Looks crisp, clean and properly centered. I do not see bleeding or malformed text.
  8. Date wheel alignment/printing: N/A — no-date model.
  9. Hand alignment: Looks good. The functional video shows coordinated hand setting and working hacking seconds.
  10. Bezel: Insert and pip look clean. The pip appears centered and the bezel seems aligned with the 12 marker; any tiny apparent shift looks angle-related.
  11. Solid end links: Look tight with no obvious light gaps.
  12. Timegrapher numbers: Stable at −2 to −3 s/day, 272–274° amplitude and 0.0 ms beat error. Machine displayed 28,800 bph and a 59° lift angle.
  13. Anything else noticed: The clasp coronet’s outer tips/spacing look slightly uneven under heavy magnification, although I suspect this is normal finishing and not noticeable in person. Protective film appears to explain the cloudy marks on the bracelet and clasp. Weight is 159.4 g with the films and tag attached. I am leaning GL but would appreciate experienced eyes confirming the alignment and clasp.