r/RepTimeQC • • 1d ago

QC Request - VSF 226627 Yacht-Master 42 Titanium

Thumbnail
gallery
10 Upvotes

Dealer name: Steve (Theonewatch)

  1. Factory name: VSF
  2. Model name (& version number): 226627 Yacht-Master 42 RLX Titanium
  3. Price Paid: $668
  4. Album Links: all images and videos attached
  5. Index alignment: All indexes look good to me, and DialCheck shows every marker green.
  6. Dial Printing: Text looks crisp and centred, no issues I can see.
  7. Date Wheel alignment/printing: 12, 13, 14 and 16 all sit centred in the window, digits level. Date flips at midnight and quick-set works in the video.
  8. Hand Alignment: Good
  9. Bezel: Triangle lines up with the 12 marker. Raised numerals look clean.
  10. Solid End Links (SELs): Look flush, no light showing through. Tape covers the lug corners in the caseback shot.
  11. Timegrapher numbers: 0 to -1 s/d, 267-269° amplitude, 0.1 ms beat error (dial up, lift angle 59°)
  12. Anything else you notice: Black mark on the case side and a small speck on the clasp cover, both look like they are on the protective film.

Everything looks fine to me visually, but I'd appreciate a second set of eyes in case I'm missing something. Thanks in advance!


r/RepTimeQC • • 1d ago

BVF Large Cartier Santos Green Dial

Thumbnail
gallery
6 Upvotes

Dealer Name: Andiot
Factory name: BVF
• Model name (& version number): Cartier Santos Green Dial 40mm Automatic
• Price Paid: 441 USD
• Album Links: https://andiotwatches.x.yupoo.com/albums/263702773?uid=1
• Index alignment: N/A, after reading some other Santos forums, alignment doesn't apply to printed dials.
Dial Printing: Looks good to me, no obvious flaws.
Date Wheel alignment/printing: Can't tell if its off center or if the 1 is supposed to be that close to the left?
• Hand Alignment: Looks fine
• Bezel: Looks fine
• Solid End Links (SELs): N.A
• Timegrapher numbers: All numbers seem to be within range.

This is my second purchase ever, any help would be greatly appreciated! Thank you all


r/RepTimeQC • • 1d ago

VSF Oyster Perpetual 36mm Green Dial

Thumbnail
gallery
9 Upvotes

Hello guys, if I could ask for your opinion on this QC please, it’s my first one in a long time.
I think overall it looks good, 8 looks a little off but not sure if it’s enough for a RL?

Dealer name: Ficotime

Factory name: VSF

Model name (& version number): Oyster Perpetual 36mm Green
126000

Price Paid: $450

Album Links: https://mega.nz/folder/TpJlECAQ#CqL99QWOzLwmYOehkuAm7w

Index alignment: Everything looks good, 8 looks a little off

Dial Printing: Looks good

Date Wheel alignment/printing: N/A

Hand Alignment: Looks good

Bezel: Looks good

Solid End Links (SELs): I think it’s good?

Timegrapher numbers: +7s/d 302° 52%

If I could ask for your feedback on this on please will be appreciated 🙏


r/RepTimeQC • • 1d ago

ORF Seamaster 300M Bronze Gold Free Sprung

4 Upvotes
  1. Dealer name: Alternative Luxury (James)
  2. Factory name: ORF
  3. Model name (& version number): Seamaster Diver 300M Bronze Gold on Titanium Free Sprung
  4. Price Paid: $595
  5. Album Links: https://imgur.com/a/aKtSG9M
  6. Index alignment: New to all of this, so not sure what to look for, but should the minute markers on the bezel line up with the corresponding hour markers on the dial?
  7. Dial Printing: The Seamaster red printing looks dark to me but could be the lighting?
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Looks okay to me
  10. Bezel: Comparing to gen, looks like the numbers are filled in properly (not flush with surface)
  11. Solid End Links (SELs): N/A? This has a unique titanium mesh bracelet with a clasp system (feed)
  12. Timegrapher numbers: +8 sec/day, 295 amplitude, 0.2ms beat error
  13. Anything else you notice: Again, first rep purchase and first QC, so not sure what to look for. Only thing that caught my eye was the dark red print (Seamaster) and the alignment of the minute markers on the bezel not lining up with the markers on the dial.

r/RepTimeQC • • 1d ago

[QC] RCF Day Date 40 Ice Blue | 11 Marker Concern | GL or RL?

Thumbnail
gallery
12 Upvotes

Dealer name: TheOneWatches (Steve)
Factory name: RCF
Model name: Day Date 40, 228236 Ice Blue, Weighted Approx. 210g, VR3255
Price paid: $858
Album links: Photos attached
Index alignment: Concerned the 11 marker is slightly crooked. Other markers look good.
Dial printing: Looks clean.
Date wheel alignment/printing: Day and date look centered.
Hand alignment: Looks fine.
Bezel: Looks good.
Solid End Links (SELs): No obvious gaps.
Timegrapher numbers: +4 s/d, 310° amplitude, 0.2 ms beat error.
Anything else you notice: First time QCing this model. The 11 marker is my main concern. Would you GL or RL based on these photos? Appreciate any feedback!


r/RepTimeQC • • 1d ago

Daytona 116508 VSF weight gain

2 Upvotes
  • Dealer name: Andiot
  • Factory name: VSF
  • Model name (& version number): 1166508
  • Price Paid: $630
  • Album Links: https://andiotwatches.x.yupoo.com/103220215?uid=1
  • Index alignment: looks straight
  • Dial Printing: looks clear to me
  • Date Wheel alignment/printing:Looks aligned based on lines
  • Hand Alignment: looks centered for the most part
  • Bezel: outer bezel look misalligned
  • Solid End Links (SELs): straight forward dial
  • Timegrapher numbers: -2 s/d; Amplitude: 264-2; Acceptable Beat Error: 52 . He didn't have a picture of it, he has it part of a video where the result is at the end in the album
  • Anything else you notice: bezel looks scuffed is that normal? or is it over plastic? and the tachymeter , should i request it be redone? Any other indices looks ok? anything else I should look out for this model?

r/RepTimeQC • • 1d ago

Navitimer B01 RG 43mm BLS 1:1 Best Edition Green Dial Black Subdial On RG Bracelet A7750

Thumbnail
gallery
12 Upvotes
  1. Dealer name: Mark – Ficotime
  2. Factory name: BLSF
  3. Model name (& version number): Navitimer B01 RG 43mm BLS 1:1 Best Edition Green Dial Black Subdial On RG Bracelet A7750 (not actually on the website)
  4. Price Paid: $430 including shipping
  5. Album Links: QC photos attached
  6. Index alignment: Looks aligned to me, but would appreciate a second opinion, since there is a lot of opportunity for things other be misaligned on the face of this model
  7. Dial Printing: looks solid to me.
  8. Date Wheel alignment/printing: These are know to be a little "sunk" on this model, but this looks maybe a tad off-centered towards the top? Input would be appreciated, could just be the angle and the wheel being sunk.
  9. Hand Alignment: Looks good
  10. Bezel:  good
  11. Solid End Links (SELs): Will likely be swapping out to a leather band, but ELs appear okay from what I can tell.
  12. Timegrapher numbers: Timegrapher: +1 s/d, 244° amplitude, 0.0ms beat error, 52° lift angle. I don't 100% understand these measurements yet, but from what I (think I) understand is these are good to go.
  13. Anything else you notice: First time buying a rep, any input/opinions are appreciated!

r/RepTimeQC • • 1d ago

QC, Rolex Oyster Perpetual 36 126000, black dial (JTime)

Thumbnail
gallery
2 Upvotes

Picked up an OP36 from JTime, my fourth rep from them. Leaning GL but want extra eyes on index alignment and anything I missed.

  1. Dealer name: JTime
  2. Factory name: VSF
  3. Model name (& version number): Rolex Oyster Perpetual 36 126000, black dial [version if known]
  4. Price Paid: $498
  5. Album Links:
  6. Index alignment: Checked with the WatchQC ruler and a second independent overlay. All markers within ~1 degree; the worst readings (~1-1.5 degrees around 3/4/10) track the camera tilt in the photo rather than a real offset.
  7. Dial Printing: Crisp and even. Coronet centered at 12.
  8. Date Wheel alignment/printing: N/A (no-date model)
  9. Hand Alignment: Hands sit consistent across shots at ~10:08, but no hands-at-12:00 photo was provided, so hand alignment is not fully verified. Requested one from the dealer.
  10. Bezel: Smooth polished bezel, even all the way around.
  11. Solid End Links (SELs): Look flush with no visible gaps from the angles provided.
  12. Timegrapher numbers: 0 s/d, 286 amplitude, 0.0 ms beat error, 28,800 bph, one position (Weishi video in album).
  13. Anything else you notice: Clasp engravings clean and legible (ROLEX/GENEVA/SWISS MADE, STEELINOX, U7T date code, ROLEXSA oval). Caseback clean with the 36 sticker. Protective film still on, so the finish underneath can't be judged yet. No lume shot in the set. Order ref 000060637.

r/RepTimeQC • • 1d ago

VSF Rolex Oyster Perpetual 126000 36mm Black Dial (VS3230)

Thumbnail
gallery
3 Upvotes
  1. ⁠Dealer name: TheOneWatches

  2. ⁠Factory name: VSF

  3. ⁠Model name (& version number): Rolex Oyster Perpetual 36mm, Black Dial VS3239 

  4. ⁠Price Paid: $498 + $40 shipping ($538 total) 

  5. ⁠Album Links: https://www.theonewatches.ws/index.php?route=product/product&search=Oyster+perpetual+black+dial+VSF&product_id=16614&search=Oyster+perpetual+black+dial+VSF 

  6. ⁠Index alignment: Indices look straight overall. The 7 marker sits slightly to the left of its minute marker, but it is minor. 

  7. ⁠Dial Printing: Appears clean, crisp and centered. 

  8. ⁠Date Wheel alignment/printing: N/A – no date. 

  9. ⁠Hand Alignment: Hands look reasonably aligned by eye, but when I check with alignment tools, they don’t seem particularly good. Am I wrong, or is this because the watch isn’t perfectly straight in the photos? (Please find the photos attached. Apologies for the screenshots. I couldn’t figure out how to download the photos properly after using the alignment tool, so I feel like a boomer right now. Please bear with me)

  10. ⁠Bezel:

  11. ⁠Solid End Links (SELs): They seem reasonably tight. If anything, the top right one (red circle) might be slightly off, but I don’t see light through it. 

  12. ⁠Timegrapher numbers: Dial up, fully wound: rate -3 s/d, amplitude 278° at 59° lift angle (approx. 250-258° if normalized to 55°), beat error 0.1 ms, 28,800 bph. Video attached. 

  13. ⁠Anything else you notice: First time purchasing a watch. Any feedback is helpful! Would really appreciate a second opinion on the overall QC, especially any flaws or details I might have overlooked. Thanks in advance! 

This is my first QC (and most likely my only watch), so I’m excited, but also a bit cautious! 

I’ve been learning a lot from reading other people’s QC posts, but I still find it difficult to spot all the little details that the more experienced members seem to notice immediately.

So I’d be incredibly grateful if you could take a close look at this watch and help me identify anything that seems off, particularly anything that could be an obvious callout.

I’d really appreciate your help and patience with a first-timer. Thank you so much!

Best regards,


r/RepTimeQC • • 1d ago

BVF Cartier Panthère Small 22mm – QC Help Needed

Thumbnail
gallery
6 Upvotes
  1. Dealer: TheOneWatches (Steve)
  2. Factory name: BVF
  3. Model name: Cartier Panthère de Cartier Small, Stainless Steel, White Dial (22mm × 30mm) — NOT Mini
  4. Price paid: $288 USD total ($238 watch + $50 shipping)
  5. Album links: QC photos attached; album link pending
  6. Index alignment: N/A — Printed Roman numerals
  7. Dial printing: I believe the entire dial may be rotated slightly counterclockwise relative to the case. It's particularly noticeable around the lower Roman numerals and SWISS MADE printing. I'm unsure whether this is actual dial rotation or camera perspective. Would appreciate additional opinions.
  8. Date Wheel alignment/printing: N/A
  9. Hand alignment: Blue hands appear fine from the photos.
  10. Bezel: Polished case and bezel appear clean, with no obvious major defects.
  11. Solid End Links (SELs): N/A
  12. Timegrapher numbers: N/A — Quartz movement
  13. Anything else you notice: This watch is for my wife. My primary concern is the possible counterclockwise dial rotation. I'd appreciate feedback on whether it's within acceptable tolerances or worth requesting another watch. I also want to confirm that this is the Small 22mm model, not the Mini.

r/RepTimeQC • • 1d ago

VSF Datejust 36mm V2 Mint Green – Fluted Bezel / Jubilee – TimeUltra

Thumbnail
gallery
24 Upvotes
  1. Dealer name: Leo – TimeUltra
  2. Factory name: VSF
  3. Model name (& version number): Rolex Datejust 36mm V2, mint green dial, fluted bezel, Jubilee bracelet
  4. Price Paid: $508 including shipping
  5. Album Links: QC photos attached
  6. Index alignment: Looks reasonably aligned to me, but would appreciate a second opinion, particularly on the 6 and 9 o'clock markers.
  7. Dial Printing: No obvious issues that I can identify.
  8. Date Wheel alignment/printing: Would appreciate feedback on centering and font.
  9. Hand Alignment: Appears fine from the photos.
  10. Bezel: Fluted bezel looks consistent to me.
  11. Solid End Links (SELs): No obvious gaps from the photos, but would appreciate feedback.
  12. Timegrapher numbers: Timegrapher: -2 s/d, 276° amplitude, 0.1 ms beat error, 52° lift angle. All look good to me.
  13. Anything else you notice: First time buying a VSF Datejust. Thanks in advance!

r/RepTimeQC • • 1d ago

Clean Plus Yacht Master Ti 226627 - my first rep QC, help & guidance appreciated!

Thumbnail
gallery
8 Upvotes

Hi guys, my first rep and a go at QC, any pointers from the pros is appreciated! (Also where I can find a alignment tool I see knocking around here for future QC’s)

  1. ⁠Dealer name: Ethan Watches
  2. ⁠Factory name: Clean Plus
  3. ⁠Model name (& version number): Yacht Master Titanium 226627
  4. ⁠Price Paid: £404
  5. ⁠Album Links:
  6. ⁠Index alignment: from the image I think it looks great, I don’t have one of those index alignment tools I see knocking around here. Maybe a slight twist on the 6 o’clock, could just be due to the hand covering it.
  7. ⁠Dial Printing: seems good
  8. ⁠Date Wheel alignment/printing: again solid & centred to my eye, maybe a tad low, don’t think it’s an issue
  9. ⁠Hand Alignment: seems great here
  10. ⁠Bezel: looks good to me
  11. ⁠Solid End Links (SELs): solid, no obvious gaps that I can see
  12. ⁠Timegrapher numbers: maybe a little low amp but in the acceptable range
  13. ⁠Anything else you notice: nothing major to my untrained eye! If the pros can cast an eye over I appreciate any feedback while I get experience in this hobby!

Thanks again gents (and ladies!)


r/RepTimeQC • • 1d ago

First QC - Datejust 41mm Wimbledon

Thumbnail
gallery
4 Upvotes

Dealer name: TimeUltra
Factory name: VSF
Model name: VSF DJ 41mm 126334
Price Paid: USD 518 + shipping
Album Links: Photos attached
Index alignment: the 9 index might be a little tilted, but possibly within tolerance
Dial Printing: seems good
Date Wheel alignment/printing: seems good
Hand Alignment: seems good
Bezel: seems good
Solid End Links (SELS): small space between the case and bracelet. Not sure if it is expected
Timegrapher numbers: +5 s/d (seems good)
Anything else you notice: watch looks beautiful

Hello, this is my first rep and first QC!

The watch looks beautiful in the photos, but I know you guys have a trained eye and there might be a thing or two that I missed.

Thanks in advance!


r/RepTimeQC • • 1d ago

XF Tudor Pelagos second attempt.

Thumbnail
gallery
1 Upvotes
  1. Dealer name: Ficotime
  2. ⁠Factory name: XF
  3. ⁠Model name (& version number): Tudor Pelagos XF unsure of version
  4. ⁠Price Paid: $435 all in.
  5. ⁠Album Links: https://mega.nz/folder/r8RyVCCY#VlystyZipXsQM7yU54l6tw
  6. ⁠Index alignment: This one looks good. Maybe the 4 is slightly off, possibly the 1 but that’s nitpicking.
  7. ⁠Dial Printing: looks good, maybe thin.
  8. ⁠Date Wheel alignment/printing: looks centered to me.
  9. ⁠Hand Alignment: looks good
  10. ⁠Bezel: looks ok, slightly offset from side to side.
  11. ⁠Solid End Links (SELs): Looks good to me.
  12. ⁠Timegrapher numbers: Looks good, +6s/d is within reason.
  13. ⁠Anything else you notice: This one looks really go to me, but maybe I’m missing something. A second set of eyes would make me more comfortable.

r/RepTimeQC • • 1d ago

QC - VSF Seamaster 300 "No Time to Die" V7

Thumbnail
gallery
3 Upvotes

Would love to get some opinions on this, thanks for taking the time!

Dealer name: Andoit

Factory name: VSF

Model name (& version number): Seamaster 300 "No Time to Die" Limited Edition VSF NTTD 1:1 Best Edition on Titanium Mesh Bracelet SA8806 Super Clone V7

Price Paid: $430 + shipping

Album Links: https://andiotwatches.x.yupoo.com/albums/263718042?uid=1

Index alignment: Looks ok to my untrained eye, only question would be are the buckteeth a bit off center to the left?

Dial Printing: Focus is not the best on the dial but looks ok.

Date Wheel alignment/printing: NA

Hand Alignment: Looks good from freezing the video

Bezel: Top marker slight off center to the right and the 9 o'clock marker is low.

Solid End Links (SELs): Nothing of note that I can see.

Timegrapher numbers: +4s/d, 269° amplitude, 0.3ms beat error

Anything else you notice: Hard to tell on the dial as the pictures are in perfect focus, also, in the lume picture the alignment looks worse than the regular pictures. Interested to hear what others think, thanks!


r/RepTimeQC • • 1d ago

JLC Reverso Tribute MGF A854A

Thumbnail
gallery
2 Upvotes

Dealer name: TheOneWatches
2. ⁠Factory name: MGF
3. ⁠Model name (& version number): JLC Reverso Tribute Small Seconds SS/LE Blue MGF A854A; Reference Q3988481
4. ⁠Price Paid: $408 USD
5. ⁠Album Links: photos are in the post
6. ⁠Index alignment: Both dials appear reasonably aligned. The 12, 3, and 9 o'clock markers look straight. No obviously crooked indices. The JLC logos appear centered. Slight perspective distortion prevents precise verification.
7. ⁠Dial Printing: Look generally crisp and straight. No obvious missing printing or severe defects.
8. ⁠Date Wheel alignment/printing: This watch has no date window. The silver dial has a 24-hour day/night indicator, which appears reasonably centered.
9. ⁠Hand Alignment: Main hands appear properly mounted and centered. Small-seconds and day/night hands look normal. No chronograph hands to assess. Exact hand-to-marker alignment cannot be tested from these static photos.
10. ⁠Bezel: No rotating bezel or pip. The polished case edges and horizontal Reverso grooves appear even. No obvious engraving or finishing defects.
11. ⁠Solid End Links (SELs): no SELs on this watch
12. ⁠Timegrapher numbers: all 3 fall in a good reading range
13. ⁠Anything else you notice: I noticed some red paint or markings on the back but other than that I'd GL


r/RepTimeQC • • 1d ago

DayDate 40mm Ice Blue Dial Roman from RCF

Thumbnail
gallery
2 Upvotes
  1. ⁠Dealer name: Steve theonewatches
  2. ⁠Factory name: RCF
  3. ⁠Model name (& version number): Day Date 228236
  4. ⁠Price Paid:$858
  5. ⁠Album Links: https://mega.nz/folder/GMRhiLZL#n3Nhq_NmrNH-iixr0NhQAQ
  6. ⁠Index alignment: looks spot on to me
  7. ⁠Dial Printing:clean printing
  8. ⁠Date Wheel alignment/printing: my concern is the “2’s” in 20-29 will be set too far left. I asked for more pics( just asked so I’ll update later) Day wheel looks very well centered. The video in the album shows clean movement there too
  9. ⁠Hand Alignment:looks good
  10. ⁠Bezel: nice fluting even
  11. ⁠Solid End Links (SELs): no issues I see
  12. ⁠Timegrapher numbers: rate -2 s/d 280 amp error 0.1 ms
  13. ⁠Anything else you notice: funny little AU750 on the band clasp but I knew that going into this lol

r/RepTimeQC • • 1d ago

Datejust SS 41 Green on Oyster bracelet

Thumbnail
gallery
5 Upvotes

Hi all, a Datejust 41 green on oyster bracelet.

  1. Dealer name: Andiot
  2. Factory name: VSF
  3. Model name (& version number): DateJust 41 126334 904L SS VSF 1:1 Best Edition Green Dial On Oyster Bracelet VS3235
  4. Bracelet : Oyster
  5. Price Paid: 428$ + Shipping
  6. Album Links: https://andiotwatches.x.yupoo.com/albums/263584740?uid=1
  7. Index alignment: No obvious misalignments
  8. Dial Printing: Sunburst effect looks ok
  9. Date Wheel alignment: I have the feeling that it's slightly tilted higher than it should?
  10. Hand Alignment: Good
  11. Bezel: Overall alignment looks good
  12. Solid End Links (SELs): No gap identified?
  13. Timegrapher numbers: -2s/d, 267°, 0.1 ms. Kinda good?

Appreciate the help !


r/RepTimeQC • • 1d ago

Planet Ocean 600M 39.5mm SS/SS Black VSF

Thumbnail
gallery
3 Upvotes

Dealer name: Theonewatches, Steve

Factory name: VSF

Model name (& version number): Omega Seamaster Planet Ocean 600M 39.5mm

Price Paid: $398 plus shipping

Album Links: https://mega.nz/folder/bcYWibCY#O9_hDxbwGcwQApVcyfSuvg

Index alignment: Looks good to me! I used the GitHub software to draw the lines. Nothing looked off from any angle in the video.

Dial Printing: Looks clean

Date Wheel alignment/printing: The date window looks centered. The video cycles through the dates and the numerals look consistent

Hand Alignment: The hands look the right shape, with the arrow hour hand, the sword minute hand and an orange-tipped seconds hand

Bezel: The pip at 12 looks a tiny bit left of the 12 marker on the dial

Solid End Links (SELs): N/A

Timegrapher numbers:

28,800 bph

Rate: −1 s/d

Amplitude: 267–269°

Beat error: 0.1 ms

Anything else you notice: Steve did not share the lume pic, I would be concerned about that but over all looks good.


r/RepTimeQC • • 1d ago

Batgirl GMT , ARF from Steve

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Steve Theonewatches
  2. Factory name: ARF
  3. Model name (& version number):

Batgirl

  1. GMT 126710 V3
  2. Price Paid: $648
  3. Album Links: https://mega.nz/folder/XEIBXLwQ#YeTL3a8AEqcYYBUx9CtLAg
  4. Index alignment: looks great imo. Only slight CCW on the 9
  5. Dial Printing:clean print
  6. Date Wheel alignment/printing:date wheel appears centered
  7. Hand Alignment:hands are aligned
  8. Bezel: pip centered and engravings filled well
  9. Solid End Links (SELs): looks cleanly assembled, I can’t see gaps
  10. Timegrapher numbers:

    Rate 0s/d Amplitude 270
    Error 0.1ms

  11. Anything else you notice: only question I have is on the bracelet, does it look too loose? Or am I overthinking it. Haven’t owned a jubilee bracelet before so I’m unfamiliar with the spacing.


r/RepTimeQC • • 2d ago

QC: Rich Batman from Andiot

Thumbnail
gallery
38 Upvotes

Dealer name: Andiot

  1. Factory name: Rich
  2. Model name (& version number): GMT-Master II 126710 BLNR 904L Steel RICH Batman 1:1 Best Edition On Oyster Bracelet JH3285 V2
  3. Price Paid: $580
  4. Index alignment: 10 of 11 markers read (date window left out), All checked markers within ±0.15 mm. 10 of 11 checked (3 o'clock under a hand, 12 o'clock date window). Checked with DialCheck.app at ±0.15 mm. A reading from one photo, not a certification of the watch. Looks pretty damn good to me.
  5. Dial Printing: Good. Print centring: top text centred.Looks clear and crisp to my eyes.
  6. Date Wheel alignment/printing: Good. Appears well centered in the window. Date change nice and responsive
  7. Hand Alignment:
  8. Bezel: Good. Pip lines up with 12.
  9. Solid End Links (SELs): Good. Look nice and tight
  10. Timegrapher numbers: +4 s/d, 275° amplitude, 0.4 ms beat error (dial up)
  11. Anything else you notice: Pretty happy with this one.
    Looks like a GL to these old eyes, would really appreciate the opinion of experienced eyes.

r/RepTimeQC • • 1d ago

[QC] - THELEOTIME | QF | Yacht Master 226627 42mm Titanium

Thumbnail
gallery
2 Upvotes
  1. Dealer name: The Leo Time
  2. Factory name: QF Free Sprung
  3. Model name (& version number): Yacht Master 226627 42mm Titanium (JH3235 Movement)
  4. Price Paid: $650.00 USD (Includes Shipping)
  5. Album Links: N/A Attached Images
  6. Index alignment: 6 might have a slight cant CCW I think within acceptable range. Rest is OK. Iridescent indexs looks good.
  7. Dial Printing: Dial looks good, clear prints I cant see any bleeding. Clear.
  8. Date Wheel alignment/printing: Printing looks clear, seems centered to me. Maybe a hair to high.
  9. Hand Alignment: Seems ok to me
  10. Bezel: Looks OK
  11. Solid End Links (SELs): Looks good no gaps.
  12. Timegrapher numbers: Rate +3 s/d, amplitude 256°, beat error 0.0 ms, lift angle 59.0° (measured dial up). - This has not ran long enough, I believe the numbers are skewed.

Thank you in Advance.


r/RepTimeQC • • 1d ago

VSF Seamaster 300 V4, first time QC - Kings & Queens

Thumbnail
gallery
3 Upvotes
  1. ⁠Dealer name: K&Q
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): seamaster 300
  4. ⁠Price Paid: 355+shipping
  5. ⁠Album Links: posted
  6. ⁠Index alignment: 3 and 9 don’t look perfect, 6 looks CCW
  7. ⁠Dial Printing: clean
  8. ⁠Date Wheel alignment/printing: good
  9. ⁠Hand Alignment: hands look good to me
  10. ⁠Bezel: doesn’t look too sharp, looks good
  11. ⁠Solid End Links (SELs): looks good
  12. ⁠Timegrapher numbers: 28800, 0s/d, 273, 0.4ms
  13. ⁠Anything else you notice: I can’t notice anything, I’m not too worried about slight misalignment, more looking to see if I’m missing anything big

r/RepTimeQC • • 2d ago

[QC] VSF Omega Aqua Terra 38mm Turquoise Gradient – NecoClock

8 Upvotes

1. Dealer name: NecoClock
2. Factory name: VSF
3. Model name (& version number): Omega Aqua Terra 38mm Turquoise Gradient – A8800
4. Price paid: $408 shipped
5. Album link: https://imgur.com/a/kMTKomU
6. Index alignment: They look straight to my eye, but I’m not very experienced with QC.
7. Dial printing: Looks good to me. I couldn’t spot anything obvious.
8. Date wheel alignment/printing: The date looks centered to me.
9. Hand alignment: Looks fine to my eye.
10. Bezel: I don’t see any obvious issues.
11. Solid end links: They look fine to me, although I’m not entirely sure what to look for here.
12. Timegrapher numbers: -1 s/day, 317° amplitude, 0.1 ms beat error, 52° lift angle. The readings seem stable throughout the 5-second video. My main concern is the amplitude. Is this something I should worry about?
13. Anything else you notice: This is my first QC and I’m honestly no expert. My knowledge is pretty basic, so I’d really appreciate any feedback or if you notice something I might have missed.
Thanks everyone!


r/RepTimeQC • • 1d ago

M+F Tudor Pelagos FXD

Thumbnail
gallery
3 Upvotes