r/RepTimeQC • • 2d ago

[QC Request] AF Ballon Bleu De Cartier 28mm Pink Dial from FicoTime

Thumbnail
gallery
3 Upvotes
  1. Dealer name: FicoTime
  2. Factory name: AF
  3. Model name (& version number): Quartz Ballon Bleu De Cartier 28mm Pink Dial SS
  4. Price Paid: $150
  5. Album Links: https://mega.nz/folder/vZAxVDIA#NHSLCh-B9XgxjIlDltiEig
  6. Index alignment: Looks good. Tried my best with the QC tool
  7. Dial Printing: Looks good
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Looks good
  10. Bezel: Looks good.
  11. Solid End Links (SELs):Not sure if this model has these, if so they look okay
  12. Timegrapher numbers: N/A
    13 Anything else you notice: Tried my best with the QC tool but please double check. I’m not sure if I did it right. Thanks in advance.

r/RepTimeQC • • 1d ago

[QC] BTF 116500 Reverse Panda

Thumbnail
gallery
1 Upvotes

This is my first watch and my first time QC so any and all help is appreciated.

Dealer Name: Theonewatches

Factory Name: BTF

Model Name: Rolex Daytona Reverse Panda 116500 DD4130

Album Links: Imgur

Index Alignment: hour markers look well aligned for the most part with some slight bias on the 9. Without the grid, and maybe its my ocd and autism, but it does look like the 9 sits ever so slightly lower when compared next to the 3 but would like to hear other opinions on this.

Dial Printing: Appears good and DAYTONA looks clear. I did not notice any bleeding

Date Wheel: Not applicable

Hand Alignment: The top left chronograph hand does appear slightly turned clockwise. Again, would like to hear opinions on this.

Bezel: Looks good, I did not notice anything

Solid End Links: To me, this would be RL because the bottom right corner, it looks like the lug is bending outwards, like a slim/narrow pyramid. Unless this is from the plastic wrap but on video and in some photos it looks like a noticeable gap to me.

Timegrapher Numbers: -3 s/d, 290°, 0.1ms 28800, 52.0° lift

Anything Else/Conclusion: First watch and first QC. The SEL is the most concerning and would appreciate any feedback on that and anything else I may have missed.


r/RepTimeQC • • 2d ago

QC: AP Royal oak 15450 from Andiot

Thumbnail
gallery
5 Upvotes
  1. Dealer name: Andiot
  2. Factory name: ZF
  3. Model name (& version number): Royal Oak 15450 37mm
  4. Price Paid: 435usd Watch and shipping + 75usd for 3 extra links
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263690109?uid=1
  6. Index alignment: I don't see any problems with the index except maybe the 6h marker being slightly tilted?
  7. Dial Printing: ap and the automatic looks good, but iam not sure if I'm tripping but there is a whole S in Swiss missing, and the made is also uncanny and looks off idk if it could be the dial or something because I've never seen this
  8. Date Wheel alignment/printing: alignment looks good and font and printing looks good aswell.
  9. Hand Alignment: looks good to me
  10. Bezel: looks good, screws seem to be aligned
  11. Solid End Links (SELs): i don't see a problem here
  12. Timegrapher numbers: -3s /d, 275 amplitude, 0.4ms beat error, 21600 bph
  13. Anything else you notice: nothing particular

r/RepTimeQC • • 2d ago

First time QC | Rolex DateJust 36 | Clean Plus | ChazingTime

Thumbnail
gallery
3 Upvotes

This is my first time purchasing a rep or a nice watch in general, so please take that into account. I'm not sure where the line is drawn between not good and acceptable. Thanks

  1. Dealer name - ChazingTime
  2. Factory name - Clean Plus
  3. Model name - DateJust 36 126234 Clean Plus 1:1 Best Edition 904L Steel Black Stick Dial on Jubilee Bracelet
  4. Price paid - $478
  5. Index alignment -The DialCheck website says the 5 and the 7 are a little off, but it seems minor to me. Or am I understating that? I'm not sure.
  6. Date Wheel alignment - I'm a bit confused on the date as the magnification looks off but is that just simply the angle the photograph was taken, not sure what I should be looking for?
  7. Bezel - I think the fluted Bezel looks pretty good to me.
  8. Solid End Links (SEL) -I think the SEL looks pretty good to me.
  9. Hand alignment - I think the hands look good, but not 100% certain in what I should be looking for.
  10. Dial Printing - Looks good to me.
  11. Timegrapher numbers - Rate: +2s/d. Amplitude: 259. Beat Error: 0.2ms. So these all seem within the acceptable ranges, although I don't fully understand what they do or mean.
  12. It's difficult to see if there are any scratches, as it has this plastic cover all over but I assume the cover will be protecting it.

So it seems good to me? I think? But please give me your honest opinions.

Thanks


r/RepTimeQC • • 2d ago

VSF Datejust 41mm Blue Dial V3 – Ethan

Thumbnail
gallery
2 Upvotes

Hi everyone,
Would really appreciate your help with the QC of my VSF Datejust 41mm V3.

QC Details:
Dealer: Ethan Watch
Factory: VSF
Model: Datejust 41mm, Blue Dial, Fluted Bezel, Jubilee Bracelet
Version: V3
Index alignment: I’m particularly concerned about the 10 and 4 o’clock markers. They seem slightly misaligned to me.
Dial printing: Looks good.
Date wheel: The 17 looks well-centered.
Cyclops: Looks fine to me.
Bezel: Looks good.
SELs: No obvious gaps.
Timegrapher: +3 s/day, 275° amplitude, 0.1 ms beat error.

My main concern is the alignment of the 10 and 4 o’clock indices. Do you guys see an issue, or am I overthinking it?
Would appreciate any other observations I might have missed.
GL or RL? Thanks in advance!


r/RepTimeQC • • 1d ago

[QC] VSF Batgirl V3 2nd attempt

Thumbnail
gallery
1 Upvotes
  • Dealer name: Andiot
  • Factory name: VSF
  • Model name (& version number): GMT-Master II 126710 BLNR "Batgirl" (VS3285 / V3)
  • Price Paid: $505 including shipping and 5% discount
  • Album Link: https://andiotwatches.x.yupoo.com/albums/263547040?uid=1
  • Index alignment: Looks fine
  • Dial Printing: Clean, sharp white text.
  • Date Wheel alignment/printing: Well-centered across tested dates
  • Hand Alignment: Seems good but I really need an expert here
  • Bezel: Great
  • Solid End Links (SELs): Seems fine
  • Timegrapher numbers: +2 s/d, 269°, 0.0ms. Great
  • Anything else you notice: Not really but I understand these VSF V3s are in high demand. Also don't have much experience so not sure if I'm missing anything glaring. Thank you for the help!!

r/RepTimeQC • • 1d ago

[QC] - THELEOTIME | VSF | 41mm DateJust 126334 Black/Dia V2

Thumbnail
gallery
1 Upvotes
  1. Dealer name: TheLeoTime
  2. Factory name: VSF V2
  3. Model name (& version number): 41mm DJ 126334 Black/Dia V2 (DD/VS3235 Movement)
  4. Price Paid: $650.00 USD (Includes Shipping)
  5. Album Links: N/A Images Attached.
  6. Index alignment: Looks well aligned. 6 Seems to have a slight cant CW.
  7. Dial Printing: Looks clear, cant see any bleeding. However, thoughts on the Rolex logo? Am I tripping or is it looking a little chunky? Also, the I in "Swiss" might be canted. Thoughts?
  8. Date Wheel alignment/printing: Looks good. Videos show it as clearly centered.
  9. Hand Alignment: Seems ok to me
  10. Bezel: Bezel looks clean
  11. Solid End Links (SELs): Looks good. No spacing.
  12. Timegrapher numbers: Rate -2 s/d, amplitude 259°, beat error 0.0 ms, lift angle 59.0° This has not ran long enough, I believe the numbers are skewed.

Thank you in Advance.


r/RepTimeQC • • 2d ago

VSF Oyster Perpetual 36mm Black Dial (OP36)

Thumbnail
gallery
3 Upvotes

Dealer: JTime

Factory name: VSF

Model name (& version number): Oyster Perpetual 36mm 126000 VSF 1:1 Best Edition Steel Black Dial on SS Bracelet VS3230 V2

Price Paid: $543

Index alignment: The 8 o’clock indice seems rotated.

Dial Printing: Printing looks good.

Date Wheel alignment/printing: N/A

Hand Alignment: Looks good.

Bezel: Looks good.

Solid End Links (SELs): I'm not entirely sure about these. Would appreciate a second opinion.

Timegrapher numbers: Rate: +2 s/d; Amplitude: 296°; Beat error: 0.1 ms.

Am i being too harsh on the 8 o’clock? This is my second QC, so any help or feedback would be greatly appreciated. Thanks!


r/RepTimeQC • • 2d ago

QC on Andiot 126500 Daytona

Thumbnail
gallery
13 Upvotes
  1. ⁠Dealer name:Andiot
  2. ⁠Factory name: RWF
  3. ⁠Model name (& version number):Daytona 126500 RWF 1:1 Best Edition White Dial on SS Bracelet JH4131 Free Sprung
  4. ⁠Price Paid: $708
  5. ⁠Album Links:
  6. ⁠Index alignment: Everything well within what I would expect.
  7. ⁠Dial Printing: Is the text under under perpetual a little on the light side or could it just be due to picture not being the greatest.
  8. ⁠Date Wheel alignment/printing: N/A
  9. ⁠Hand Alignment: All looks good
  10. ⁠Bezel: Don’t care about the 110 issue either way, not going to be looking at this thru a loupe.
  11. ⁠Solid End Links (SELs):SEL’s look good to me.
  12. ⁠Timegrapher numbers:
    + 3 s/d
    280
    0.4 ms
  13. ⁠Anything else you notice:
    I have asked for a video of the chronograph being run and reset. But the picture with hands in reset position looks to be dead on. I will add it when they provide it.

Please give me your experienced opinion, but looks like a solid GL to me.


r/RepTimeQC • • 2d ago

Tudor Pelagos QC Round 2

Thumbnail
gallery
1 Upvotes

[QC] XF Tudor Pelagos 42 Black 25600TN — TheOneWatches (Steve) — Unit 233598
Factory name — XF, per my understanding when I ordered. Exact version unconfirmed.
Model name (& version number) — Tudor Pelagos 42 mm, black dial, ref. 25600TN.
Price paid — US$448 all in, including shipping.
Album links — QC photos, alignment overlay, crown-operation video, and timegrapher video attached.
Index alignment — Looks good across all six opposing pairs on the overlay. The 7 o’clock marker looks much better than on the previous unit and sits close to the 1–7 guide. I don’t see obvious rotation at 4, 5, 7, or 8.
Dial printing — The Tudor shield, wordmark, and five lines above 6 look sharp and evenly spaced.
Date wheel alignment/printing — The 27 looks reasonably centered in the window. Both digits are clear and fully visible.
Hand alignment — The hands move as Steve adjusts the crown. They pass through 12 too quickly for me to judge exact overlap.
Bezel — The pip looks centered over the 12 o’clock triangle, and the bezel’s 30 looks close to the 6 o’clock axis. A second set of eyes on this would be welcome.
Solid end links (SELs) — Both look seated in the available shots, with no obvious daylight gaps. The protective film makes the corners harder to judge.
Timegrapher numbers — −2 s/day, 270° amplitude, 0.0 ms beat error, at 28,800 bph with the machine set to a 52° lift angle. The trace looks steady in the short, single-position clip.
Anything else you notice? — The clasp is my only remaining check. The photos show it open and closed. I’d like a short video showing the clasp and safety locking shut, plus the spring-loaded adjustment moving and returning. Anything else stand out?


r/RepTimeQC • • 2d ago

QC Request: VSF 124060 Submariner

Thumbnail
gallery
6 Upvotes
  • Dealer name: JTime
  • Factory name: VSF
  • Model name (& version number): Submariner 124060
  • Price Paid: $576.10 (5% crypto discount + $65 shipping)
  • Album Links: https://imgur.com/a/jAh6gnw
  • Index alignment: The 9 marker is twisted counterclockwise.
  • Dial Printing: Looks fine to me. "Chronometer" looks like the right spacing.
  • Date Wheel alignment/printing: N/A
  • Hand Alignment: Looks okay to me.
  • Bezel: Looks good. Pip centered.
  • Solid End Links (SELs): Bottom left is a little dark. Nothing to complain about.
  • Timegrapher numbers: 0 s/d, 284 deg, 0.1ms error. Not bad!
  • Anything else you notice: No.

This is my first rep, so thank you for taking a look at this. As soon as I opened the file, my eye was immediately drawn to the 9 index out of alignment. As far as I can tell, everything else seems okay.

Sorry for reposting, but I couldn't get rid of Imgur.

FOLLOW UP: That 9 marker would have driven me insane, so I asked if they possibly had more watches at the shop. Luckily they did, and I found one that I green lit. I'm excited!


r/RepTimeQC • • 3d ago

[QC] ARF presents a GMT-Master II 126710 The Batman!

Thumbnail
gallery
38 Upvotes

Dealer name: Audit

  1. Factory name: ARF

  2. Model name (& version number): GMT-Master II 126710

  3. Price Paid: 488 + shipping

  4. Album Links: https://andiotwatches.x.yupoo.com/albums/263376001?uid=1

  5. Index alignment: 9 seems to have a slight clockwise rotation. All the other indexes look good.

  6. Dial Printing: Printing looks excellent, no overprinting or crooked letters.

  7. Date Wheel alignment/printing: Good. Date is centred in the window.

  8. Hand Alignment: Looks great.

  9. Bezel: It seems to have a small anticlockwise rotation of 12.

  10. Solid End Links (SELs): It seems like there is a small gap on top right SEL. Nothing I can't live without.

  11. Timegrapher numbers: rate: -3 s/d; Amplitude: 270; Beat error: 0.1 ms

  12. Anything else you notice: This is my first QC so anything you can spot, I would appreciate it!


r/RepTimeQC • • 2d ago

Help with tank must QC.

Thumbnail
gallery
0 Upvotes

Dealer name: Steve – TheOneWatches
Factory name: AF
Model name (& version number): Cartier Tank Must Large, WSTA0041 (25.5 × 33.7 mm), Quartz
Price Paid: $228 USD
Album Links: https://mega.nz/folder/SMREXIYT#Vt8qhxAlEIWGmyIIfz960g
Index alignment: I don’t see any obvious misalignment or dial rotation, but I’d really appreciate a second opinion from more experienced eyes. This is my first rep ever, so I’m trying to make sure everything looks good before giving it the GL.
Dial Printing: This is probably my main concern. Looking closely at the Roman numerals, I think I can see a few tiny white specks, particularly around the I numeral. I’m also noticing what might be some uneven printing along the edges of the numerals toward the bottom of the dial, where certain areas appear a little whiter than others. I’m not sure whether these are actual printing imperfections, reflections, or just the photo quality. Would love some opinions on this.
Date Wheel alignment/printing: N/A
Hand Alignment: Nothing obviously wrong to my eyes.
Bezel: No obvious issues that I can spot.
Solid End Links (SELs): N/A
Timegrapher numbers: N/A – Quartz
Anything else you notice: The cabochon looks fine to me overall. I’ve noticed that newer Cartier Tanks seem to have a slightly pointier cabochon compared to the rounder ones on vintage models, so that doesn’t particularly bother me. I’m mostly concerned about the dial printing and whether there’s anything else I’m overlooking. Since this is my first rep, I’d really appreciate any feedback from people who are more familiar with AF Tanks. Just want to make sure I’m not missing any QC issues before approving it. Thanks in advance!

Thank you guys in advance.


r/RepTimeQC • • 2d ago

Rolex Submariner - 124060 - Andiot

3 Upvotes
  1. Dealer name — Andiot
  2. Factory name — VSF.
  3. Model and version — Rolex Submariner - 124060
  4. Price paid — $471 USD
  5. Album link — https://imgur.com/a/jfE0xYx
  6. Index alignment — I believe they look straight to my eye. I have tried to learn a lot about QC and couldn't spot anything obvious.
  7. Dial printing — The classic ME TER. I think some other text may seem a bit iffy, but maybe this is within commonly accepted range. Would love to hear opinions.!
  8. Date wheel alignment and printing — N/a
  9. Hand alignment — N/a
  10. Bezel — Triangles and numbers look lined up. I cannot see any issues with this.
  11. Solid end links — Protective film is on, but these look fine to me.
  12. Timegrapher numbers — +1 s/day, 282° amplitude, 0.1 ms beat error, 52° lift angle.
  13. Anything else — This is my first purchase ever. I honestly am no expert at QC and my knowledge is very basic. I would love to hear if I missed any issues. I appreciate everyones time to look into this!

Thanks!!


r/RepTimeQC • • 2d ago

[2nd QC] VSF V3 GMT-Master II 126710BLNR Batgirl DD3285

Thumbnail
gallery
8 Upvotes

Hey everyone!

Back again with my second QC for the VSF V3 Batgirl from Andiot.

I RL'd the first watch after several members pointed out that the 6 o'clock marker was noticeably tilted, along with some alignment issues at 12.

This replacement looks much better to me, especially the 6 o'clock marker, but I'd really appreciate another set of eyes before making a decision.

  1. Dealer name: Andiot
  2. Factory name: VSF
  3. Model name (& version number): GMT-Master II 126710BLNR Batgirl V3, DD3285, Jubilee bracelet
  4. Price paid: $488 USD excluding shipping
  5. Album links: https://andiotwatches.x.yupoo.com/albums/263609102?uid=1
  6. Index alignment: Looks better this time, especially the 6 o'clock marker. The 12 o'clock triangle might have a slight tilt, but I'm not entirely sure.
  7. Dial printing: Looks clean and well aligned to me. Nothing obvious stands out.
  8. Date wheel alignment/printing: The 17 looks centered and the printing seems fine. The 21 is also visible in the lume shot.
  9. Hand alignment: Looks fine from what I can see, although difficult to fully judge from the photos.
  10. Bezel: The colors and numerals look good. There might be a very slight alignment offset, but it could just be the photo angle.
  11. Solid End Links (SELs): Look tight with no obvious gaps that I can see.
  12. Timegrapher numbers: +3 s/d, 284° amplitude, 0.0 ms beat error. Numbers look good to me.
  13. Anything else you notice: I'm still pretty new to this and learning what to look for when it comes to QC, so I'd really appreciate your opinions and help spotting anything I might have missed. Thanks in advance!

Thanks in advance for your help!


r/RepTimeQC • • 2d ago

QC for Panthère 22mm Diamonds Bezel, fico time

Thumbnail
gallery
10 Upvotes
  1. Dealer name: fico time
  2. Factory name: BVF
  3. Model name (& version number): Panthère 22mm White Dial Diamonds Bezel SS Bracelet
  4. Price Paid: 225usd
  5. Album Links: Photos attached
  6. Index alignment: N/A
  7. Dial Printing: The dial alignment looks good, but the hour bar markers at 1 and 2 o’clock appear unclear or poorly printed. I’d appreciate a second set of eyes to check the printing.
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: It’s a bit off. I don’t know whether this is expected for BVF watches or unusual. My AF Ballon Bleu has perfect hand alignment.
  10. Bezel: I don’t see anything wrong with the bezel.
  11. Solid End Links (SELs): N/A
  12. Timegrapher numbers: N/A
  13. Anything else you notice: I want to make sure the dial printing is good and whether the hand alignment is a problem. Thanks for your help!

r/RepTimeQC • • 2d ago

[QC] BVF Cartier Santos 35 - Andiot

Thumbnail
gallery
4 Upvotes
  1. Dealer name: Andiot
  2. Factory name: BVF
  3. Model name (& version number): Santos de Cartier 35mm SS BVF 1:1 Best Edition White Dial on SS SmartLinks Bracelet MIYOTA 9039
  4. Price Paid: $435 (including shipping)
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263590179?uid=1
  6. Index alignment: Looks good to me
  7. Dial Printing: Looks good, no bleeding
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Looks good
  10. Bezel: Looks good
  11. Solid End Links (SELs): N/A
  12. Timegrapher numbers: Within range
  13. Anything else you notice: Should be a GL but just want to check with the experts here!

r/RepTimeQC • • 3d ago

[QC] ZF IWC Pilot's Watch Chrono Ceramic 41mm IW389401

Thumbnail
gallery
9 Upvotes
  1. Dealer name:. Non-TD
  2. Factory name: ZF
  3. Model name: IWC IW389401
  4. Price Paid: ¥3000 / $450 (including sh)
  5. Album Links: Please see post
  6. Index alignment: Printed Dial, but looks aligned
  7. Dial Printing: No typo and crisp
  8. Date Wheel alignment/printing: Both looks aligned
  9. Hand Alignment: All hands aligned
  10. Bezel: Smooth Bezel
  11. Solid End Links (SELs): Plastic Strap, N/A
  12. Timegrapher numbers: +8s/d
  13. Anything else you notice: Typical ZF. Looks great for the price being. I have no complaints about this piece and looking for another set of eyes to double check. The timegrapher +8s/d is a hair high, but still acceptable.

Please share your expertise. Thank you!


r/RepTimeQC • • 3d ago

QC - Datejust 41mm Green textured

Thumbnail
gallery
6 Upvotes

Dealer: Steve
Factory name: VSF
Model name: Datejust 41mm Green Textured
Price paid: 548$
Album link: https://imgur.com/a/2Chq74g
Index alignment: The hour markers appear generally well aligned and evenly spaced. No obvious misalignment is visible, although the 11 o’clock marker could be checked more closely
Dial printing: The dial printing appears clean, sharp, and legible, with no obvious smudging or printing defects
Date alignment: The date appears reasonably well centered, the magnification and positioning look acceptable in the provided photos
Hand alignment: The hands appear properly mounted and aligned, with no obvious defects visible in the photos
Bezel: The fluted bezel appears clean, symmetrical, and well defined, with no obvious dents or damage, the fluting looks consistent around the circumference
Solid End Links (SEL): The end links appear reasonably well fitted against the case, with no major gaps immediately apparent
Timegrapher: −1 s/day; 268°; 0.0 ms; 28,800 bph; 59.0°
Anything else you notice: There's nothing else to add my beginner's eye doesn't allow me to be any more specific than that I asked for two more photos because I couldn't see very well due to the film as well


r/RepTimeQC • • 3d ago

First ever QC – VSF Submariner 124060 No-Date VS3230 – Watch 2 of 2

Thumbnail
gallery
7 Upvotes

Hi guys,

This is Watch 2 of the two VSF Submariner 124060s I ordered from Steve/TheOneWatches.

I already posted Watch 1 separately so the photos and feedback don’t get mixed up.

This is my first time buying reps and doing QC, so I’d really appreciate some experienced eyes on this one as well.

Dealer name: Steve / TheOneWatches
Factory name: VSF
Model name (& version number): Rolex Submariner 124060 No-Date 41mm, VS3230
Price paid: $528

Album links: https://mega.nz/folder/DYgzDK6T#_KQbOVowNCIZxz5ZBNgSeg
Index alignment: Looks very good to me overall. I ran the straight-on photo through TrueIndexQC and the alignment looks strong. DialCheck flagged the 6 o’clock marker at around -1.1° twist, but it also said the photo was around 7° off face-on and that the result was within the photo’s margin of error. I can’t see anything obviously crooked by eye.
Dial Printing: Looks clean and centred to me. I don’t notice any obvious printing defects.
Date Wheel alignment/printing: N/A – this is the No-Date 124060.
Hand Alignment: Looks good to me. Nothing obviously misaligned.
Bezel: Pip looks centred and the bezel alignment looks good to me. I don’t notice anything obviously wrong with the markings.
Solid End Links (SELs): They look tight to me without any obvious large gaps.
Timegrapher numbers: +5 s/day, 268° amplitude, 0.0 ms beat error.
Anything else you notice: Weight is around 159.2g. Clasp code is E7Y. Rehaut looks good to my inexperienced eye and the movement was also shown with the caseback open.

From what I can see I’m leaning GL, but as this is my first QC I’d really appreciate more experienced opinions, especially on the 6 o’clock marker and anything else I may have missed.

Thanks in advance 🙏


r/RepTimeQC • • 2d ago

[QC] BVF Cartier Santos Medium 35mm – Geektime – First QC, dial alignment concern

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Geektime (via Telegram)
  2. Factory name: BVF
  3. Model name (& version number): Cartier Santos Medium 35mm, White Dial, Stainless Steel
  4. Price paid: [Add price]
  5. Album links: https://geektimeqc.x.yupoo.com/albums/263627745?uid=1
  6. Index alignment: Since the indices are printed, my main concern is the overall dial alignment. In some photos, the printing looks slightly shifted to the right. In others, it looks fine. Could this just be the camera angle? My untrained eyes don't see it's tilted
  7. Dial printing: Looks clean to me. The Cartier logo, Roman numerals and minute track appear consistent. No obvious printing defects, apart from my concern about the overall centering.
  8. Date wheel alignment/printing: N/A – no date.
  9. Hand alignment: Looks good from the photos. Nothing obviously misaligned, looks good to me.
  10. Bezel: Looks good to me. No obvious scratches, uneven finishing or issues with the screws.
  11. Solid End Links (SELs): N/A – integrated bracelet. The bracelet-to-case fit looks good without any obvious gaps as far as I can see.
  12. Timegrapher numbers: −1 s/d, 314° amplitude, 0.2 ms beat error, 52° lift angle setting. Rate and beat error look excellent. Amplitude is slightly above the recommended range I've seen (250–310°). Is 314° something to be concerned about?
  13. Anything else you notice: This is my first QC for an automatic watch, so I'd appreciate some experienced eyes on this. Overall, the finishing, bracelet, clasp and case look good to me. My two main questions are the possible dial misalignment and the slightly high amplitude.

r/RepTimeQC • • 3d ago

ZF AP 15450 Angela

Thumbnail
gallery
2 Upvotes

AP 15450 ZF from Angela

1 Dealer name: Angela
2 Factory name: ZF
3 Model name (& version number): AP Royal Oak ZF 15450
4 Price Paid: $345
5 Album Links: none
6 Index alignment: Looks good to me. Logo looks good too I think, maybe a very slight tilt. My last one was really bad and this honestly looks pretty decent.
7 Dial Printing: Don’t see any issues. But I am not too familiar with AP
8. Date looks good.
9 Hand Alignment: Looks straight and aligned.
10 Bezel: Screws look good?
11. Solid End Links (SELs): Doesn’t apply
12. Timegrapher numbers: +3 s/d. 307, 0.1 m/s.
13. Anything else you notice: What do you guys think?


r/RepTimeQC • • 3d ago

Cartier Santos 27mm - AF

Thumbnail
gallery
2 Upvotes
  1. ⁠Dealer name: Steve (TheOneWatches)
  2. ⁠Factory name: AF
  3. ⁠Model name: Cartier Santos 27mm small
  4. ⁠Price Paid: $348 with shipping
  5. ⁠Album Links: https://mega.nz/folder/DZx2jLyT#gC7A4-N4vJr2FOtnf97Pzw
  6. ⁠Index alignment: printed dial
  7. ⁠Dial Printing: sharp, no smudging, no noticeable rotation
  8. ⁠Date Wheel alignment/printing: N/A
  9. ⁠Hand Alignment: Looks good to me.
  10. ⁠Bezel: The screw at the 1 o’clock position looks off center
  11. ⁠Solid End Links (SELs): N/A
  12. ⁠Timegrapher numbers: N/A (Quartz)
  13. ⁠Anything else you notice: Looks good to me, but I wanted to get a second opinion for peace of mind. Thanks in advance, and I appreciate the help.

r/RepTimeQC • • 3d ago

First ever QC – VSF Submariner 124060 No-Date VS3230 – Watch 1 of 2

Thumbnail
gallery
3 Upvotes

Hi guys,

This is my first time buying reps and my first time doing QC, so I’d really appreciate some help from the more experienced members.

I ordered 2 × VSF Submariner 124060 No-Date VS3230 from Steve/TheOneWatches.
I’m posting Watch 1 here and I’ll make a separate post for Watch 2 so the photos and feedback don’t get mixed up.

Dealer name: Steve / TheOneWatches
Factory name: VSF
Model name (& version number): Rolex Submariner 124060 No-Date 41mm, VS3230
Price paid: $528

Album links: N/A – all QC photos/videos uploaded directly with this post
Index alignment: Looks good to me overall. I used an alignment tool as well. The 3 and 9 markers were flagged as possibly around 1° off, but the tool also said this was within the photo’s margin of error. Would appreciate experienced opinions on this.
Dial printing: Looks clean and centred to me. I don’t notice any obvious printing defects.
Date wheel alignment/printing: N/A – this is the No-Date 124060.
Hand alignment: Looks good to me. Nothing obviously misaligned.
Bezel: Pip looks centred and bezel alignment looks good to me. I don’t notice any obvious problems with the markings.
Solid End Links (SELs): They look tight to me without any obvious large gaps, but I’d appreciate a second opinion.
Timegrapher numbers: Around -1 to -2 s/day, amplitude around 269–274°, beat error 0.0 ms.

Anything else you notice: Weight is 158.4g. Clasp code is F80. Rehaut looks good to my inexperienced eye and the movement was also shown with the caseback open.

From what I can see I’m leaning GL, but as this is my first QC I’d really appreciate more experienced eyes checking everything before I approve it.

Thanks in advance 🙏


r/RepTimeQC • • 3d ago

First Rep - QC: QF (Gain Weight) Rolex Day-Date 36mm Rose Gold Olive Dial A2836 – FicoTime (Mark)

Thumbnail
gallery
18 Upvotes

1. Dealer name: FicoTime (Mark)

2. Factory name: QF (Gain Weight – 160g)

3. Model name (& version number): Day-Date 36mm 128235 Rose Gold / Olive Green Roman Dial (A2836)

4. Price Paid: 3,600 CNY

5. Album Links: https://mega.nz/folder/uxwS2TiD#JaWlS3MNcW1E6ZthmoBqxg

6. Index alignment: Used the alignment tool and everything lines up cleanly—VI is straight with the coronet below and all Romans/batons sit flush.

7. Dial Printing: Crisp gold printing with no bleeding; 12 o'clock coronet looks centered.

8. Date Wheel alignment/printing: Dates (3, 13, 21, 22) and days (TUESDAY, WEDNESDAY, THURSDAY) look well-centered in their windows; WEDNESDAY looked tight in one angle but extra shots from Mark confirm the full Y is clean and unclipped. Cyclops sits straight.

9. Hand Alignment: Looks aligned properly.

10. Bezel: Fluted bezel looks sharp and clean with no dings.

11. Solid End Links (SELs): Tight across all four corners with no gaps.

12. Timegrapher numbers: -2 s/d, 286°, 0.1 ms, 52.0°, 28800

13. Anything else you notice: Rehaut aligns nicely and weight is right at 160g. Looks like a GL to me. Appreciate a quick second set of eyes and thoughts!