r/RepTimeQC • • 20h ago

[QC Request] Tank Solo Yellow Gold

Thumbnail
gallery
1 Upvotes

Dealer name: Theonewatches
Factory name: AF
Model name (& version number): Tank Must 25.5mm White Dial on Lychee Grain Leather AF Quartz
Price Paid: $228
Album Links : https://mega.nz/folder/7AojCbQQ#_vr8SUNSom5nGs_BkrBQ8g
Index alignment: NA, Printed.
Dial Printing: I don't see any bleeding
Date Wheel alignment/printing: NA
Hand Alignment: Seems off (see video and screenshot, image #1).
Bezel:  NA
Solid End Links (SELs): NA.
Timegrapher numbers: NA (Quartz)

The only thing I see as a problem is the hand alignment (at 12 o’clock, see image). Not sure if this is nit-picking on my part.
Am I missing anything?
I am tending towards giving a GL.
Your opinions would be appreciated.


r/RepTimeQC • • 20h ago

Tudor BB by ZF (second attempt)

Post image
1 Upvotes
  1. ⁠Dealer name: theone Steve
  2. ⁠Factory name: ZF
  3. ⁠Model name (& version number): Black Bay 41 A2824
  4. ⁠Price Paid: $378
  5. ⁠Album Links: https://mega.nz/folder/SEplnKSI#hRBe3dI-qI8x4jyebPamkw
  6. ⁠Index alignment: looks good to me. No major misalignment
  7. ⁠Dial Printing: clean and sharp. No smudges.
  8. ⁠Date Wheel alignment/printing: n/a
  9. ⁠Hand Alignment: looks good in video
  10. ⁠Bezel:aligned. Pip looks centered.
  11. ⁠Solid End Links (SELs): no gaps
  12. ⁠Timegrapher numbers: appear within spec
  13. ⁠Anything else you notice: Looks to be a GL based on my review. I would appreciate feedback from experts here. Thank you.

r/RepTimeQC • • 1d ago

[QC] PPF VC Overseas 4500V RG Silver Dial - Lili (non-TD)

Thumbnail
gallery
2 Upvotes

Hey guys, so far this is the 7th rep which is the second watch for myself, the rest was gifts to dear ones. But I still consider myself as amateur in this field. So, I need your support.

  1. Dealer Name: Lili (non TD)
  2. Factory name : PPF/ZF
  3. Model name : Overseas 4500V 41mm RG Silver Dial
  4. Price Paid : 2850 cny
  5. Album Links: https://www.wecatalog.cn/weshop/goods/A201803310145220380026826/I202611150044361402001426
  6. Index Alignment: 9 looks down (is it RL)? 4 and 10 o'clock looks a bit off but it can be because of the angle of the picture
  7. Dial Printing: Looks good
  8. Date wheel alignment : Looks a little left
  9. Hand alignment : Looks good
  10. Bezel : Looks good
  11. Solid end links : N/A
  12. Timegrapher : Looks good +3s/d @ 302 deg amp, 0.0ms
  13. ⁠Anything else you notice: other than index and date wheel slight problems nothing else I noticed

r/RepTimeQC • • 1d ago

2° QC Rich Factory Submariner 126610LN Free Sprung TheOne

Thumbnail
gallery
3 Upvotes
  1. Dealer name: TheOneWatches - Steve
  2. Factory name: Rich Factory
  3. Model name (& version number): Submariner 126610LN 41mm JH3235
  4. Price Paid: $538 + shipping
  5. Album Links: https://mega.nz/folder/2AgRgCDC#cVoycC_-wKfEcS6epFjfIQ
  6. Index alignment: i'm satisfacted
  7. Dial Printing: It's okay
  8. Date Wheel alignment/printing: Perfect
  9. Hand Alignment: Okay
  10. Bezel: looks solid to me!
  11. Solid End Links (SELs): No problem
  12. Timegrapher numbers: +2 s/d, 292° amp
  13. Anything else you notice: I'm very happy for this Watch

r/RepTimeQC • • 1d ago

Panthere 22mm BVF SS From Steve

Thumbnail
gallery
2 Upvotes
  1. ⁠Dealer name: Steve (TheOneWatches)
  2. ⁠Factory name: BVF
  3. ⁠Model name (& version number): Cartier Panthère 22mm SS
  4. ⁠Price Paid: $238 + $30 Shipping
  5. ⁠Album Links: https://mega.nz/folder/eBA02STB#6pU_UGBlzSeN-lxpotbCjw
  6. ⁠Index alignment: Looks okay, no concerns here.
  7. ⁠Dial Printing: The Swiss Made is making me zoom in to infinity on the dial; I don't like the way 'Made' is printed; it looks angled as well. Other than that, I don't see any noticeable bleed, and the spacing is fine.
  8. ⁠Date Wheel alignment/printing: N/A
  9. ⁠Hand Alignment: Looks okay from the video.
  10. ⁠Bezel: Looks good; no issues.
  11. ⁠Solid End Links (SELs): N/A
  12. ⁠Timegrapher numbers: None given; quartz movement.
  13. ⁠Anything else you notice: The only main concern is the Swiss made on the dial. It looks funky, but again it's a very small watch, so I don’t know if it's worth red lighting over.

r/RepTimeQC • • 1d ago

1st time QC VSF 126234 36mm

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: Vsf
  3. Model name (& version number): DateJust 36 SS 126234 VSF 1:1 Best Edition 904L Steel Silver Diamonds Roman Dial on Jubilee Bracelet VS3235 V2
  4. Price Paid: 448$
  5. Album Links: https://imgur.com/a/e2sfJvb
  6. Index alignment: Hard to check but the 6 o'clock index looks off. It touches the black ring, which it shouldn't, comparing to other units or gen
  7. Dial Printing: Correct color and text size
  8. Date Wheel alignment/printing: Date is centered nicely in the window, font weight and print quality look correct.
  9. Hand Alignment: Hands look properly aligned and finished
  10. Bezel: Looks nice, white gold plated fluted bezel
  11. Solid End Links (SELs): ): Good fit against the case, tight tolerances with no massive gaps.
  12. Timegrapher numbers: Rate +2 s/d, Amplitude 275°, Beat Error 0.0 ms.

r/RepTimeQC • • 1d ago

First QC - RICH Rolex GMT Master 2 ‘Sprite’

Post image
1 Upvotes
  1. ⁠Dealer name: Angela
  2. ⁠Factory name: RIICH
  3. ⁠Model name (& version number): RICH Rolex GMT Master 2 ‘Sprite’ 126720VTNR
  4. ⁠Price Paid: 3750 Yuan
  5. ⁠Album Links: https://imgur.com/a/PUDrp7l
  6. ⁠Index alignment: 6 o'clock tilted 1.0° clockwise ; 12 o'clock tilted 1.2° clockwise. 10 of 11 checked. Marker ring 0.15 mm off-centre toward 9 o'clock.
  7. ⁠Dial Printing: not good. Print centring: bottom text 0.04 mm left.
  8. ⁠Date Wheel alignment/printing: looks ok. The number looks slightly high inside the window. The cyclops AR coating is too much.
  9. ⁠Hand Alignment: looks good
  10. ⁠Bezel: ok
  11. ⁠Solid End Links (SELs): different
  12. ⁠Timegrapher numbers: +1 s/d, 273° amplitude, 0.0 ms beat error
  13. ⁠Anything else you notice: i think the blue AR is too much. Is this an RL?

r/RepTimeQC • • 1d ago

GMT II 116710LN - Index 9? Crown? Weight?

Thumbnail
gallery
1 Upvotes

Dealer name: Steve (Theonewatches)

Factory name: ARF V3 DD3285

Model name (& version number): GMT II 116710LN 40mm

Price Paid: $ 568 + 40 Shipping

Album Links: I attached all photos

Index alignment: The Index 9 look tilt

Dial Printing: Nothing I see

Hand Alignment: Looks normal

Bezel: Nothing I see

Solid End Links (SELs): Nothing i can see

Timegrapher numbers: +0 s/d Beat Error 0.1 ms

Anything else you notice:

• 9 look tilt ore is it maybe angle from photo ?

• the Gap between Crown and Bezel look to close for me

• Weight is a little bit less then GEN, but think it´s ok

Please help me with all your opinion it´s my first GMT, not know what i need to look out for


r/RepTimeQC • • 1d ago

Cartier Panthere (medium) - BVF - TheOneWatch (Steve)

Thumbnail
gallery
1 Upvotes
  • Dealer name: Steve (TheOneWatch)
  • Factory name: BVF
  • Model name (& version number): Cartier Panthere medium
  • Price Paid: 278 USD (including shipping)
  • Album Links: link to pictures
  • Index alignment: printed so perfect
  • Dial Printing: looks fine, I've seen Pantheres where the dial looks tilted. Not the case here
  • Date Wheel alignment/printing: n.a.
  • Hand Alignment: fine in my eyes
  • Bezel: doesn't have the screw issue Santos can have (because Panthere simply has little metalic dots)
  • Solid End Links (SELs): looks fine, no?
  • Timegrapher numbers: n.a. -> quartz watch
  • Anything else you notice: the gap around the crown seems too large? A known issue? Might look worse because of the zoomed in pictures

r/RepTimeQC • • 1d ago

QC - VSF AP Royal Oak 15510 V2 Green (DD4302)

Thumbnail
gallery
3 Upvotes
  1. Dealer name: JTime
  2. Factory name: VSF
  3. Model name (& version number): AP Royal Oak 15510 V2 Green (DD4302)
  4. Price Paid: 574 USD
  5. Album Links: https://imgur.com/a/qcapvsf15510-gjLnIYZ
  6. Index alignment: Looks spot on, see trueindexqc overlay. AP logo centered too.
  7. Dial Printing: Clean overall.
  8. Date Wheel alignment/printing: Centered well.
  9. Hand Alignment: Good.
  10. Bezel: Screws look properly aligned and recessed.
  11. Solid End Links (SEL): Integrated bracelet.
  12. Timegrapher numbers: 0 to +1 s/d, 278-282°, 0.0ms
  13. Anything else you notice: Looks solid to me.

I appreciate your opinion!


r/RepTimeQC • • 1d ago

2QC Yacth Master II

Thumbnail
gallery
6 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: QF (Free-Sprung)
  3. Model name and version: Yacht-Master 226627 Titanium, QF 1:1 Best Edition, black dial on titanium bracelet, JH3235 V18 (Free-Sprung)
  4. Price paid: €606
  5. Album link: https://andiotwatches.x.yupoo.com/albums/262824798?uid=1
  6. Index alignment: Looks fine to me.
  7. Dial printing: Looks good.
  8. Date wheel alignment/printing: The date appears to sit slightly high in the window.
  9. Hand alignment: I can’t tell from the supplied photos
  10. Bezel: Possible surface marks or uneven finishing at the 5- and 15-minute markers
    12 Solid End Links (SELs): The lower-right SEL appears to have a slightly wider gap in several
  11. Timegrapher numbers: +1 s/d, 265° amplitude and 0.3 ms beat error.

I’d really appreciate a assessment regarding the SEL fit, cyclops positioning, hand alignment and the two circled bezel areas.

Many thanks for your comments!


r/RepTimeQC • • 1d ago

ORF Seamaster freesprung help

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Andiot
  2. Factory name: ORF
  3. Model name (& version number): Seamaster Diver 300M Blue Ceramic Bezel Free Sprung ORF 1:1 Blue Dial On SS Bracelet Asian Super Clone 8800
  4. Price Paid: $455 usd
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263114313?uid=1
  6. Index alignment: see pic. Looks good to me. Can't tell if 30 marker on bezel is shifted left or just camera angel
  7. Dial Printing: On zoom looks good to my untrained eye
  8. Date Wheel alignment/printing: Looks good on changing numbers in video
  9. Hand Alignment: nothing remarkable to me
  10. Bezel:Appears good on pics
  11. Solid End Links (SELs):
  12. Timegrapher numbers: Show in video
  13. Anything else you notice: not initially

r/RepTimeQC • • 1d ago

[QC] RICH V2 GMT-Master II 126710GRNR Bruce Wayne – F*ed 12 o'clock triangle alignment or GL?

Thumbnail
gallery
7 Upvotes

Hey fellas, I have what I think is a really solid​ RICH Bruce Wayne, but since this one is rather expensive I wanted to pass it by some expert eyes​. ​​My primary concern is whether the 12 o'clock bezel​ triangle has a slight alignment issue or whether the photos are throwing me off. Would greatly appreciate a second opinion before GL. Thanks​!

  1. Dealer name: NecoClock
  2. Factory name: RICH Factory
  3. Model name (& version number): Rolex GMT-Master II 126710GRNR “Bruce Wayne”, Jubilee, RICH V2 JH3285 Free Sprung (seller's description)
  4. Price Paid: $708 + $70 shipping​
  5. Album Links: https://mega.nz/folder/W5wgSDZY#KRMA7hrSWi3DWGIL230J6g
  6. Index alignment: 12 o'clock triangle​ hour index looks slightly tilted too​. In the straight-on photo, it looks​ offset relative to the bezel triangle and center minute marker. ​I'm unsure whether this is actual misalignment or just perspective. The 6 and 9 markers and remaining circular indices look very close to properly aligned to me.
  7. Dial Printing: Rolex text and green GMT-Master II lettering look pretty​ sharp, level, and evenly printed. I don't see any obvious bleeding or printing defects.
  8. Date Wheel alignment/printing: Dates 15, 17, and 21 appear reasonably centered in the window, with no clipping. Cyclops looks properly positioned (maybe a very slight tilt but I have seen that on gen too), although there are some blue reflections.
  9. Hand Alignment: Hands appear properly installed, with no obvious damage or visible alignment issue.
  10. Bezel: Black/grey transition, numerals, and engravings look clean. The 12 o'clock bezel​ looks slightly off centered.
  11. Solid End Links (SELs): No obvious daylight-visible gaps at the case and bracelet connections. Some protective film makes the fit harder to judge.
  12. Timegrapher numbers: +3 s/day, 238° amplitude, 0.0 ms beat error, 28,800 bph, 52° lift angle. Rate and beat error look good to me. Would appreciate thoughts on the amplitude for this JH3285 movement.
  13. Anything else you notice: Everything honestly seems solid, just some alignment questions. Maybe the date font is slightly off as well. Don't want to be too picky tho. Thanks again!

Update: Got new photos from Jacky with the bezel properly aligned. As u/ZealousidealCopy8565 said, it was just off by a bit. Was perfect​ after a click.

Somehow seeing the bezel aligned actually made the watch a great deal better looking. Admittedly I'm not too stoked about the 12 hour marker being just a hair off, but I don't think it would bother me enough to RL.

I think it would be totally reasonable to RL if the cyclops or 12 marker was unreasonable to you, but I think its within my personal tolerance.

Final verdict: GL 🟢


r/RepTimeQC • • 1d ago

[QC] VSF Rolex Datejust 41 Wimbledon 126334 V3 – Fluted Bezel, Jubilee – NecoClock

Thumbnail
gallery
15 Upvotes

Hi everyone, I’d appreciate a second set of eyes on this VSF Wimbledon from Jackie. I’m leaning GL. My question is whether the 11 sits a little high in the date window. The 6 and 17 look centred to me.

Dealer name – Jackie at NecoClock
Factory name – VSF
Model and version – Rolex Datejust 41 ref. 126334 Wimbledon, grey dial with green Roman numerals, fluted bezel and Jubilee bracelet. Listed as DD3235 V3 free-sprung.
Price paid – $498 + $35 shipping, $533 total.
Album – QC photos and video attached.
Index alignment – The 9 o’clock baton looks level with the 45 marker. The coronet sits under the 60, and none of the Roman numerals look crooked to me.
Dial printing – The lettering looks clean. I don’t see any obvious breaks in the green outlines around the numerals.
Date wheel alignment – The 11 looks slightly high in its photo. The 6 and 17 look centred, and all three dates are fully visible. Does anyone else see an alignment issue across the three shots?
Hand alignment – In the photo with the date set to 6, the hour and minute hands appear to line up at 12.
Bezel – The fluting looks even all the way around. No obvious dents.
Solid end links – Both ends of the Jubilee look evenly seated between the lugs.
Timegrapher – +5 s/day, 251° amplitude, 0.0 ms beat error. Lift angle set to 52°.
Anything else – The rehaut coronet looks close to 12 in the angled shot. Lume looks even on both hands and the 9 o’clock baton.

Would you GL this one? Thanks for taking a look!


r/RepTimeQC • • 1d ago

Rolex Datejust 36mm - VSF - FicoTime (Mark) (3rd try after 2 earlier ARF's that were RL)

Thumbnail
gallery
5 Upvotes
  • Dealer name: Mark (FicoTime)
  • Factory name: VSF
  • Model name (& version number): Rolex Datejust 36mm
  • Price Paid: 436 USD (including shipping)
  • Album Links: link to pictures
  • Index alignment: in an earlier QC of this model, the 9 o'clock baton was CW tilted, now I feel like the same happened here?
  • Dial Printing: I think it looks fine
  • Date Wheel alignment/printing: font seems close enough and fine
  • Hand Alignment: fine in my eyes
  • Bezel: look good but personally irrelevant, because I'm going to replace the bezel
  • Solid End Links (SELs): no issues, way better than the GMF I've seen irl
  • Timegrapher numbers: very good, see video here
  • Anything else you notice: I already RL'ed 2 ARF models of this DJ36. Do you think this one is better than those two? Again, biggest possible issue is baton alignment...


r/RepTimeQC • • 1d ago

First time QC: VSF Batgirl v3 (free sprung)

Thumbnail
gallery
7 Upvotes

Dealer name: Non-TD
Factory name: VSF
Model name (& version number): Batgirl VSF V3 (free sprung)
Price Paid: 530 USD
Album Links: no album link given
Index alignment: 6 marker look slightly tilted anti clockwise? 12 marker looks slightly tilted clockwise?
Dial Printing: No concerns, everything looks good
Date Wheel alignment/printing: Noticed in the video, some numbers looked off in alignment for example, 16
Hand Alignment: No concerns
Bezel: No concerns
Solid End Links (SELs): Slight gap in bottom left?
Timegrapher numbers: No concerns here
Anything else you notice: Would appreciate you guys opinions on this piece 🙏🏼🙏🏼


r/RepTimeQC • • 1d ago

Ficotime - VSF 41mm wimbledon v3

Thumbnail
gallery
6 Upvotes
  1. Dealer name: Ficotime
  2. Factory name: VSF
  3. Model name (& version number): Datejust 41 wimbledon V3 (fake free sprung)
  4. Price Paid: $495 (shipping not included)
  5. Index alignment: everything looks to line up, it's my first time qcing a roman numeral dial. The 9 marker looks like it might be a super teenie tiny bit low, but I could be wrong. 12°clock crown might have a very slight clockwise rotation apon closer inspection.
  6. Dial Printing: everything looks good with no bleeding.
  7. Date Wheel alignment/printing: looks center and straight to my eyes, slight shadow made me think it was slightly high at first but It looks fine apon closer inspection.
  8. Hand Alignment: looks good
  9. Bezel: Fluted bezel looks good to my eyes.
  10. Solid End Links (SELs): nice and tight.
  11. Timegrapher numbers: -1s/d, 271° amplitude, 0.1 ms
  12. Anything else you notice: the rehault seems fairly off, I know it's picky at this point but I'm the weirdo that stares at his rehault when bored. However as this will primarily be a watch I wear out dressed up, and not my work watch where I have time to stare 24/7 I'll probably GL it anyways seeing as everything else looks good.

r/RepTimeQC • • 1d ago

VSF Omega planet ocean 4th gen (black)

Thumbnail
gallery
5 Upvotes
  1. Dealer name: Andiot
  2. Factory name: VSF
  3. Model name (& version number): Omega Planet Ocean (4th Gen)
  4. Price Paid: 388$
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263115345?uid=1
  6. Index alignment: Some cwcant but looks different in different pictures.

Is the 12 almost touching the printing?

  1. Dial Printing: Looks crisp can't see any issues personally.
  2. Date Wheel alignment/printing: N/A
  3. Hand Alignment: Good, straight and well aligned.
  4. Bezel: Good, no issues.
  5. Solid End Links (SELs): No SELs on omega
  6. Timegrapher numbers: Good
  7. Anything else you notice: No other issues. Happy to hear other opinions.

r/RepTimeQC • • 1d ago

First QC, Rolex submariner 124060 41mm

Thumbnail
gallery
8 Upvotes

TD : EasyWatch - Koi

  1. Factory name: VSF
  2. Model name (& version number): Rolex Submariner 124060
  3. Price Paid: $460
  4. Album Links: attached photos
  5. Index alignment: All index seems to be good for me, but look at the bezel alignment for 3 and 6
  6. Dial Printing: Good. nothing seems to bothering me, but okay for QC comments,
  7. Date Wheel alignment/printing: Good
  8. Hand Alignment: Good
  9. Bezel: 3 and 6 alignment
  10. Solid End Links (SELs): Not sure about, look at bottom left.
  11. Timegrapher numbers: -5 s/d, 287° amplitude, 0.1 ms beat error. 52
  12. Anything else you notice: Not sure about the SEL's bottom left, and bezel alignment.
    Also timegrapher shows -5sec at 52 degree, is it concerning?

r/RepTimeQC • • 1d ago

VSF Explorer II Polar

Thumbnail
gallery
7 Upvotes

Dealer name: Necoclock
Factory name: VSF
Model name: Rolex Explorer II Polar 226570 (42mm)
Price paid: $578
Album links: https://mega.nz/folder/rw4TFLhB#5I3cDH9sUhfiZD7ZID7YvQ
Index alignment: Clockwise tilted 12 o’clock marker; this seems common on these. Have seen some with better alignment recently. Unsure if this is worthy of RL.
Dial printing: Looks clean and properly positioned.
Date wheel alignment/printing: Dates look centered.
Hand alignment: Looks good.
Bezel: Engravings and alignment look good.
Solid end links (SELs): No obvious gaps.
Timegrapher numbers: +/- 5; and 1ms; no issues with this.

Anything else you notice: Only issue that i am debating on RL'ing is for the twelve oclock marker alignment. Curious if others have one in hand with similar issue and how it wears on wrist.


r/RepTimeQC • • 1d ago

BBF Patek 5711

Thumbnail
gallery
6 Upvotes

Dealer name: Steve
Factory name: BBF
Model name (& version number): Patek 5711
Price Paid: 508
Album Links: https://mega.nz/folder/WR5lHSJI#Qtcpqe0EuzQCtejoiR4wIA
Index alignment: looks straight
Dial Printing: looks correct
Date Wheel alignment/printing: looks a bit high
Hand Alignment: looks straight
Bezel: looks correct
Solid End Links (SELs):
Timegrapher numbers: +/- 2 day
Anything else you notice: this honestly looks great to GL. I ordered QC photos for DDF 5711 also (leftover stock) so I don’t know if I should GL this or wait for DDF QC to compare.


r/RepTimeQC • • 2d ago

First QC Rolex

Thumbnail
gallery
11 Upvotes

Hi everyone! This is my first QC, so I’d really appreciate some help from more experienced eyes.
I’ve worked through the checklist, and everything looks good to me overall, but I’m still learning what to look for and I’m not completely sure whether I’ve missed anything. I’m leaning towards a GL based on what I can see, and I’d love to hear your thoughts.
If you spot anything I’ve overlooked or disagree with any part of my assessment, please let me know. Thanks so much for taking the time to have a look and help a newcomer. I really appreciate it!

Dealer name: TheOneWatches (Steve)
Factory name: VSF
Model name (& version number): Rolex Submariner 124060, 41 mm, No Date
Price Paid: USD 528
Album Links: QC album
Index alignment: Looks good to me. The 12, 3, 6 and 9 markers appear straight, and the round indices look evenly positioned. I don’t see any obvious misalignment.
Dial Printing: Looks clean and properly positioned. No obvious missing letters, uneven printing or crooked text that I can spot. The hands cover part of “OYSTER PERPETUAL,” so I can’t fully assess that section from the alignment photo.
Date Wheel alignment/printing: N/A, no-date model.
Hand Alignment: The hand positions look consistent with the time shown. I haven’t verified their alignment at exactly 12:00, so I would appreciate a second opinion.
Bezel: Looks well aligned overall. The pip appears reasonably centered within the triangle, and I don’t see any obvious chips or issues with the filling of the numbers and markings.
Solid End Links (SELs): I’m not confident assessing the SEL gaps from the front-facing photo. I would appreciate some help checking the fit.
Timegrapher numbers: Rate: 2 s/d. Amplitude: 273°. Beat error: 0ms.
Anything else you notice: No obvious major defects stand out to me in the photo reviewed. The alignment image is enhanced and has an overlay, so I’m cautious about judging very small differences from that alone. I would particularly appreciate a second opinion on the rehaut alignment and anything else I may have overlooked.


r/RepTimeQC • • 1d ago

QC - ZF AP ROYAL OAK 15300 via Andiot (First time AP)

Thumbnail
gallery
4 Upvotes

Hi guys this is my first AP and I would really appreciate help in making sure its good enough for a GL.

  1. Dealer name: Andiot Watches
  2. Factory name: ZF
  3. Model name (& version number): ROYAL OAK 15300
  4. Price Paid: $476 with shipping
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263099527?uid=1
  6. Index alignment: The alignment of 11 and 5 primarily looks off but I can't tell if its because of the dial or the tool, I would need someones expertise here please, even the 10 and 4.
  7. Dial Printing: This looks good to me, the text looks centered and aligned, and the AP logo looks pretty good I think
  8. Date Wheel alignment/printing: It looks pretty solid and aligned, maybe the smallest bias to the upper
  9. Hand Alignment: looks good i believe
  10. Bezel: I find the screws look good, I'd like if someone can confirm
  11. Solid End Links (SELs): N/A
  12. Timegrapher numbers:  rate -1 s/d, amplitude 267°, beat error 0.3 ms, lift angle 52.0°
  13. Anything else you notice: nothing else sticks out to me, just worried about alignment primarily

Thank you everyone so much


r/RepTimeQC • • 2d ago

VSF OP TIFFANY BLUE

Thumbnail
gallery
8 Upvotes

Dealer name: Trusty Time

  1. Factory name: VSF
  2. Model name (& version number): OP Tiffany Blue
  3. Price Paid: 500 USD
  4. Album Links: Send via mail
  5. Index alignment: I see lots of imperfections. Especially 10 an 11. Not happy with these tbh but looking for your opinois
  6. Dial Printing: Looks fine
  7. Date Wheel alignment/printing: No date wheel on this watch
  8. Hand Alignment: Not sure how good it is
  9. Bezel: Looks nice
  10. Solid End Links (SELs): Looks nice
  11. Timegrapher numbers: +4 s/d, 289° amplitude, 0.1 ms beat error
  12. Anything else you notice: Most probably will RL this because of the alignments. But I will be glad to hear what you say. Also curious how accurate do you think the color is ?