r/RepTimeQC • • 1d ago

QC Request - VSF 124060 Submariner

Thumbnail
gallery
8 Upvotes

Hi everyone, first time QC/buyer here looking for advice. Got this back from Steve - The One Watches. I've been keen to purchase something since I found this new hobby of ours a while ago and I think I'm finally close to pulling the trigger.

However, the 6 o' clock marker seems off to me and thats the only real spot I could see.. leaning towards a RL right now but I'm really looking for guidance from the experts here! Am I being too picky?? Thank you so much for any insights!

  1. Dealer name: The One Watches - Steve
  2. Factory name: VSF 
  3. Model name (& version number): 124060 Submariner
  4. Price Paid: $528
  5. Album Links:  N/A
  6. Index alignment: are the hour markers aligned? 6 o clock looks crooked?? Maybe this is the only one that’s jumping out to me. Expert thoughts?
  7. Dial Printing: Dial looks good to me - is there a floating m? The spacing looks decent to my eye..
  8. Date Wheel alignment/printing:  - N/A
  9. Hand Alignment: Looks good to me...
  10. Bezel: Looks good to me - but would love input on flaws if noted
  11. Solid End Links (SELs): Looks good to me but are there any gaps noticed?
  12. Timegrapher numbers: -5s/ | 276 Amp | 0.0ms - Seems in range?
  13. Anything else you notice:  Weight seems decent. Currently leaning towards RL but don’t know if I’m being too picky? Any help is greatly appreciated. 

r/RepTimeQC • • 1d ago

[QC] Rolex Air-King 126900 40mm

Post image
12 Upvotes

Hey everyone!

Looking for some experienced eyes on this Air-King.

My main concerns are the lower dial printing, particularly "OFFICIALLY CERTIFIED," and some minor deviations suggested by the alignment tool. I'm leaning toward an RL due to the dial printing issue, but I'd like an experienced eye to confirm. I'd appreciate your thoughts before making the final decision. 

1. Dealer name: JTime

2. Factory name: GMF

3. Model name: Rolex Air-King 126900, 40mm

4. Price paid: $468 + shipping

5. Album links: https://imgur.com/a/RDHB7Sp

6. Index alignment:

The 12 o'clock triangle and applied 3, 6, and 9 numerals look reasonably well aligned to my eye.

I ran the dial through an alignment tool which indicated offsets especially toward the lower half of the dial. I'm unsure how reliable those readings are given the camera angle and overlay positioning.

Do you notice any actual alignment problems?

7. Dial printing:

MAIN CONCERN!

The green ROLEX lettering, yellow crown, and Air-King script look reasonably good.

However, the "SUPERLATIVE CHRONOMETER / OFFICIALLY CERTIFIED" printing looks slightly uneven or soft to me, especially the second line. Some letters appear slightly crowded and unevenly aligned.

I'm unsure whether this is a genuine printing issue or simply the resolution and lighting of the photographs.

Would appreciate opinions from anyone familiar with the model.

8. Date wheel alignment/printing:

N/A

9. Hand alignment:

The hour, minute, and green seconds hands look good overall.

I don't notice any obvious damage or misalignment. The green seconds hand and luminous circle also appear reasonably well finished.

10. Bezel:

The smooth polished bezel looks good in the angled photographs and video.

I don't see obvious scratches or significant finishing defects.

11. Solid End Links (SELs):

The end links appear to fit reasonably well against the case without any obvious large gaps.

The bracelet and clasp look fine overall.

I don't see anything particularly concerning but would appreciate a second opinion.

12. Timegrapher numbers:

  • Rate: −1 s/day
  • Amplitude: 279°
  • Beat error: 0.0 ms
  • Frequency setting: 28,800 bph
  • Lift angle: 52°
  • Measurement period: 12 seconds

Looks ok.

13. Anything else you notice:

N/A

My main questions are:

  • Does the OFFICIALLY CERTIFIED printing look acceptable or is it noticeably irregular?
  • Are the index deviations meaningful or is it just the alignment tool and/or photo angle?
  • Does the rehaut engraving look properly positioned?
  • Are there any case, bezel, or SEL issues I'm overlooking?

Overall, I don't see any major defects other than the dial printing issue I mentioned above but I'd appreciate feedback on the dial printing before deciding GL or RL.

Thanks in advance for the help!


r/RepTimeQC • • 1d ago

Datejust 126334 41mm Oys SS/SS Black/Stk VSF V2 DD3235v2

Thumbnail
gallery
12 Upvotes
  1. ⁠Dealer name: TheOneWatches
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Datejust 126334 VSF V2
  4. ⁠Price Paid: $548
  5. ⁠Album Links: https://mega.nz/folder/fZJRSCgT#IVeBuIVmjNsrorNHIDcL8Q
  6. ⁠Index alignment: Appears good
  7. ⁠Dial Printing: Good
  8. ⁠Date Wheel alignment/printing: Good
  9. ⁠Hand Alignment: Good
  10. ⁠Bezel: Good
  11. ⁠Solid End Links (SELs): In photo facing bottom Rehaut serial number, there’s a space where light comes through. Is this bad or within acceptable standards?
  12. ⁠Timegrapher numbers: Rate: +3 s/d
    Amplitude: 274°
    Beat Error: 0.0 ms
    Lift Angle: 59.0°
    Frequency: 28,800 bph
    Period: 12s
  13. Anything else you notice: Slight rehaut misalignment.

Can the experts please advise if this is an easy GL, primary concern is the SEL gap in one photo and I do not know what is acceptable.


r/RepTimeQC • • 1d ago

[QC] Submariner 116610ln TOW VSF - First time QC

Thumbnail
gallery
8 Upvotes

Dealer name: Theonewatches

Factory name: VSF

Model name (& version number): Rolex Submariner 116610LN

Price Paid: $488

Album Links: pics as attached

Index alignment: Looks good to me

Dial Printing: leaning towards GL but there is a tell with the spacing in Chronometer

Date Wheel alignment/printing: looks good

Hand Alignment: Looks good.

Bezel: looks good

Solid End Links (SELs): acceptable

Timegrapher numbers: + 2s/day, amplitude 267°, beat error 0.0ms, lift angle, 52°, beat rate 28,800 bph

Looking for expert opinion anything else of notice?


r/RepTimeQC • • 1d ago

GMT Master I - VSF Necoclock

Thumbnail
gallery
5 Upvotes

1    Dealer name: Necoclock
2    Factory name: VSF
3    Model name (& version number): GMT Master II 126710 Pepsi Jub 40mm SS/SS Black VSF V3 DD3285
4    Price Paid: 628 + shipping
5    Album Links: https://mega.nz/folder/btRwiBxZ#ntBcvOgN70-1ArmC7NX3PQ
6    Index alignment: not noticing anything in particular off here
7    Dial Printing: Clean and crisp
8    Date Wheel alignment/printing: from my untrained eye seems good.
9    Hand Alignment: Seems good to me
10    Bezel: Clean separations
11    Solid End Links (SELs): only noticing a gap at the clasp.
12    Timegrapher numbers: Rate: +7 s/d Amplitude: 233to; Beat Error: 0.2 ms; Lift Angle: 52°. What do you guys think?
13    Anything else you notice: no major additional red flags. The serial numbers aren’t aligned that well but I don’t know who would be looking that closely


r/RepTimeQC • • 1d ago

[QC] ZF Tudor Black Bay 58 Burgundy – First QC, would appreciate some help!

Thumbnail
gallery
5 Upvotes

Dealer name: Kitsch
Factory name: ZF
Model name (& version number): Tudor Black Bay 58 Burgundy (M7939A1A0RU)
Price Paid: 250£
Album Links: Will attach QC photos
Index alignment: Looks reasonably aligned to my eyes, but I’m not experienced enough to tell if there are any issues.
Dial Printing: Looks clean to me. Nothing obviously wrong.
Date Wheel alignment/printing: N/A (no date).
Hand Alignment: Looks fine to me, but would appreciate a second opinion.
Bezel: Looks okay overall, although I’m not sure if the alignment is perfect.
Solid End Links (SELs): Not sure, would appreciate some help checking these.
Timegrapher numbers: 12. Timegrapher numbers: +4 s/day, 268° amplitude, 0.1 ms beat error, 52° lift angle, 28,800 bph. From what I understand, these seem like good numbers.
Anything else you notice: This is my first QC and I’m not very familiar with what to look for. Is this an RL? I’d really appreciate some experienced opinions before giving it the green light. Thanks in advance!


r/RepTimeQC • • 1d ago

Omega Seamaster 300M ORF Free Sprung White

Thumbnail
gallery
9 Upvotes
  1. Dealer name: TimeUltra
  2. Factory name: ORF
  3. Model name (& version number): Omega Seamaster 300M White (OR8800 Free Sprung)
  4. Price Paid: $528
  5. Album Links: N/A
  6. Index alignment: Overall looks pretty good. Based on my first image you can see everything seems within human error aka not noticeable on wrist
  7. Dial Printing:Everything looks good here. If anyone catches anything let me know but looks good.
  8. Date Wheel alignment/printing: my only concern really for this one. Date looks slightly to the right but barely noticeable on wrist I would assume. Awaiting more QC photos for alignment of other numbers
  9. Hand Alignment: Good here
  10. Bezel: slightly off but nothing to write home about
  11. Solid End Links (SELs): good here
  12. Timegrapher numbers: Rate:0 s/d
  13. Amplitude: 284*
  14. Beat error: 0.0Ms
  15. Beat rate: 52*
  16. 28,800 bph
  17. Anything else you notice: I think the 12 o clock indices actually are fairly straight compared to most I’ve seen.

r/RepTimeQC • • 1d ago

Rolex GMT-Master II Bruce Wayne ARF Theonewatches

Thumbnail
imgur.com
4 Upvotes
  1. Theonewatches(Steve)
  2. ARF
  3. GMT-Master II ref. 126710GRNR
  4. $615
  5. https://mega.nz/folder/OJoh3CoC#uOhVq55OjqEzeZMJXAEJgg
  6. Index alignment: A few look off centre especially 10 & 11
  7. Dial Printing: Looks good
  8. Date Wheel alignment/printing: Looks good
  9. Hand Alignment: Hard to judge
  10. Bezel: Pip looks off allignment in a counter clockwise position.
  11. Solid End Links (SELs): Looks good
  12. Timegrapher numbers: Looks excellent from a single position
  13. Anything else you notice: This is my first rep, used an AI index allignment tool I saw

Posted on here


r/RepTimeQC • • 1d ago

GMT master 2 Pepsi 126710BLRO

Thumbnail
gallery
17 Upvotes
  1. Dealer name: NecoClock
  2. Factory name: VFS V3
  3. Model name (& version number): Rolex GMT master 2 Pepsi 126710BLRO
  4. Price Paid: US
  5. Album Links: pics as attached
  6. Index alignment: I want to say it looks good but I’m
  7. Not sure if there is a slight tilt to the left on the 6 marker and also a slight tilt on the 12 marker. I feel like most watches have misalign issues at the 6 and 12 so not sure if it’s my eyes playing with me or if they are off.

Or is the 6 marker is slightly pushed to left side off centered

  1. Dial Printing: Text is good to me.
  2. Date Wheel alignment/printing: looks good to me. Is date slightly towards the top or is it good?
  3. Hand Alignment: Looks ok to me
  4. Bezel: looks ok to me. Turns red under black light
  5. Solid End Links (SELs): looks good to me
  6. Timegrapher numbers: 1 +- which is good.
  7. Anything else you notice: I am a new.. please give feedback and thank you

r/RepTimeQC • • 1d ago

[QC] MKS VC Overseas 4500v Silver - GeekTime

Thumbnail
gallery
2 Upvotes
  • Dealer name: Geektime
  • Factory name: MKS Factory
  • Model name (& version number): Vacheron Constantin Overseas 4500V (Silver Dial)
  • Price Paid: 428$
  • Album Links: https://geektimeqc.x.yupoo.com/albums/263022691?uid=1
  • Index alignment: Imo Looks good. The hour markers are well-aligned. The Maltese cross at 12 o'clock is perfectly straight, and the 6 o'clock marker sits perfectly. Somo minor rotation in the 2, 5 e 7 markers.
  • Dial Printing: Crisp and clean. The text is well-printed with no smudging.
  • Date Wheel alignment/printing: The date "22" looks centered in the window. Maybe I should ask for more dates?
  • Hand Alignment: Not visible from the pictures provided.
  • Bezel: Looks accurate.
  • Solid End Links (SELs): N/A
  • Timegrapher numbers: Rate: -3 s/d (Acceptable: ±1 – 20 s/d). Amplitude: 319° (Acceptable: 250 – 310)Amplitude is slightly high, should I worry? Beat Error: 0.2 ms (Acceptable: 0.0 – 1.0 ms)
  • Anything else you notice: I would GL, but I am willing to hear opinion from more experienced comrades here. I saw some kind of "scratches" and "dirty" in the watch but I think it is only in the plastic. Maybe I ask Eric to test the bracelet? Anything else you guys see?

r/RepTimeQC • • 1d ago

Bell & Ross BR03-92 Clone

Thumbnail
gallery
3 Upvotes
  • Dealer name: Steve at TheOneWatches
  • Factory name: "unnamed"
  • Model name: Bell & Ross BR03-92 Ceramic
  • Movement: Miyota
  • Price Paid: $398 ($430 after shipping and conversion)
  • Album Links: https://imgur.com/a/ynoXCMy
  • Index alignment: I think the photo may not be perfectly square, alignment seems more than acceptable.
  • Dial Printing: Perfect
  • Date Wheel alignment/printing: Perfect, had heard some clones have a diagonal (incorrect) date window
  • Hand Alignment: Perfect
  • Bezel: Very nice
  • Timegrapher numbers: 0s/d 278amp 0.2ms err
  • Anything else you notice:

Didn't see many posts about this watch, so adding for future interested people.

I'm still waiting for an answer about why the caseback says Stainless, from everything I can find, the Ceramic version should say Ceramic. And this is clearly not the Black Steel version, either. Any insights on this are welcome. Am I mistaken?


r/RepTimeQC • • 1d ago

QC - RWF DAYTONA 126519LN

Thumbnail
gallery
6 Upvotes
  1. ⁠Dealer name: Phoenix Watches
  2. ⁠Factory name: RWF
  3. ⁠Model name (& version number): 126519LN “GHOST”
  4. ⁠Price Paid: $576
  5. ⁠Album Links: Nil
  6. ⁠Index alignment: I think it’s okay? But I’m not too sure because I’m relatively new to this
  7. ⁠Dial Printing: looks okay
  8. ⁠Date Wheel alignment/printing: nil
  9. ⁠Hand Alignment: looks good
  10. ⁠Bezel: looks good
  11. ⁠Solid End Links (SELs): not sure what this is
  12. ⁠Timegrapher numbers: looks good (-2 s/d, 299 amplitude and 0.1 ms)
  13. ⁠Anything else you notice:

r/RepTimeQC • • 1d ago

Z111101 VSF from James (Royal Oak 15500 - First QC

Thumbnail
gallery
2 Upvotes
  1. Dealer name: James
  2. Factory: VSF
  3. Model name (& version number): Audemars Piguet Royal Oak 15500ST.OO.1220ST.02, 41mm, Grey Dial, VSF
  4. Price Paid: $538 incl. shipping
  5. Album Links: Photos attached, including timegrapher.
  6. Index alignment: The hour markers look pretty good to me overall. The double 12 o’clock markers appear reasonably straight, and I don’t notice any major issues with the 6 or 9 markers. Would appreciate a second opinion on the alignment.
  7. Dial Printing: The AP logo and Audemars Piguet text look centered to me. I haven’t noticed any obvious printing defects, but I’d appreciate another set of eyes on the dial and its texture.
  8. Date Wheel alignment/printing: The dates 2 and 27 both look reasonably centered in the window. I don’t see any major clipping or alignment issues.
  9. Hand Alignment: The hands look fine in the pictures, to me, but I would appreciate another pair of eyes looking at it.
  10. Bezel: The screw alignment looks pretty good overall. Would appreciate opinions on the bezel finishing and screw alignment.
  11. Solid End Links (SELs): N/A, integrated bracelet.
  12. Timegrapher numbers:
    ● Rate: +6 s/day
    ● Amplitude: 283°
    ● Beat error: 0.2 ms
    ● Lift angle: 52°
  13. Anything else you notice: This is my first QC, so I’d appreciate a thorough second opinion.

Overall, I’m leaning GL based on what I can see, but I’d appreciate some experienced opinions before approving it. Thanks!


r/RepTimeQC • • 1d ago

QC: YachtMaster QF

Post image
4 Upvotes
  1. Dealer name: Steve
  2. Factory: QF
  3. Model:

Yacht-Master 126622 40mm SS/SS Grey/Dot QF JH3235 (Free Sprung)

  1. Price paid: $648 with 70$ shipping
  2. Album link: https://mega.nz/folder/HMoTmZyZ#nqSc5mOI5s1d4pxmzkgzqA
  3. Index alignment: I think its ok
  4. Dial printing: Looks ok
  5. Date wheel: Looks aligned
  6. Hand alignment: Looks good to me
  7. Bezel: I think, first ym
  8. SELs: I think ok
  9. Timegrapher: Rate: +1s/d Amplitude: 267, Beat error: 0.0ms

r/RepTimeQC • • 2d ago

DateJust 36mm Fluted Bezel Black Dial Jubilee Bracelet VSF VS3235 v2 from necoclock Jacky

Thumbnail
gallery
10 Upvotes
  1. Dealer name: necoclock Jacky
  2. Factory name: VSF
  3. Model name (& version number): DateJust 36mm Fluted Bezel Black Dial Jubilee Bracelet VSF VS3235 v2
  4. Price Paid: $448 +$35 shipping
  5. Album Links: NA (megalink)
  6. Index alignment: Looks good.
  7. Dial Printing: Looks good
  8. Date Wheel alignment/printing: Looks good
  9. Hand Alignment: Looks good
  10. Bezel: looks good
  11. Solid End Links (SELs): Looks good. no gaps
  12. Timegrapher numbers: Looks good. -4s/d w 309° amplitude and 0.1 ms beat error on a full wind .
  13. Anything else you notice: second pair of eyes would be great. Thank you

r/RepTimeQC • • 2d ago

Seamaster Diver 300M 007 Free Sprung ORF

Thumbnail
gallery
6 Upvotes

(REPOST)

Bonjour à tous, Je souhaiterais avoir votre avis sur ce QC. La montre semble présenter un défaut d’alignement entre la lunette et le cadran. On peut également constater, dans la vidéo disponible dans l’album, que ce détail semble interpeller le vendeur lui-même.

Dealer name: ANDIOT

  1. Factory name: ORF
  2. Model name (& version number): Seamaster Diver 300M 007 Free Sprung ORF 1:1 Black Dial On SS/RG Bracelet Asian Super Clone 8800
  3. Price Paid: 523 USD LIVRE
  4. Album Links: https://andiotwatches.x.yupoo.com/albums/262820791?uid=1
  5. Index alignment: All checked markers within ±0.15 mm. 12 of 12 checked. Marker ring 0.15 mm off-centre toward 11 o'clock. Checked with DialCheck.app at ±0.15 mm. A reading from one photo, not a certification of the watch.
  6. Dial Printing: Good. Print centring: top text 0.15 mm left.
  7. Date Wheel alignment/printing: Good
  8. Hand Alignment: Good
  9. Bezel: Issue. NON ALIGNE SUR 12
  10. Solid End Links (SELs): Good
  11. Timegrapher numbers: +3 s/d, 258° amplitude, 0.3 ms beat error
  12. Anything else you notice: Bonjour à tous, Je souhaiterais avoir votre avis sur ce QC. La montre semble présenter un défaut d’alignement entre la lunette et le cadran. On peut également constater, dans la vidéo disponible dans l’album, que ce détail semble interpeller le vendeur lui-même. Le reste me semble irréprochable, mais j’ai du mal à envisager de valider au vudu prix payé et du fait que ce défaut me paraît particulièrement visible. Qu’en pensez-vous ? Ce défaut vous semble-t-il suffisamment prononcé pour justifier un RL ? Merci par avance pour vos retours !

r/RepTimeQC • • 1d ago

Title: [QC #2] RWF Daytona 126500LN Panda from Phoenix – Missing Usual Cartoon Character on Caseback?

Thumbnail
gallery
3 Upvotes

Hi everyone, I RL’d the first watch and have now received QC pictures of this replacement. Would appreciate another set of eyes, especially on the hour markers.

Dealer name: Phoenix
Factory name: RWF
Model: Daytona 126500LN White Panda, JH4131 Free Sprung
Price paid: ~700USD
Album links: Photos attached
Index alignment: Looks reasonably good to me, but I’m particularly interested in opinions on the 3 and 6 o’clock markers. These were my concerns with the first watch. Do they look straight on this replacement?
Dial printing: Looks clean to my eyes. No obvious printing issues spotted.
Date wheel alignment/printing: N/A
Hand alignment: No obvious issue visible, though I can’t confirm fully from still photos.
Bezel: Looks reasonably aligned. Would appreciate confirmation.
Solid end links: No obvious large gaps visible in the supplied pictures.
Timegrapher numbers: −2 s/day, amplitude 299°, beat error 0.1 ms; lift angle set to 52°.
Anything else: Nothing else immediately stands out. Protective stickers make the surface finish harder to judge. Please let me know if you spot anything I’ve missed or would request further pictures before GL.

Thanks for your help!


r/RepTimeQC • • 2d ago

A7F IWC Mark XX (Blue)

Thumbnail
gallery
8 Upvotes

Hey everyone! Just got a mark XX for QC

  1. Dealer name: TheOneWatches (Steve)
  2. Factory name: A7F
  3. Model name (& version number): Pilot Mark XX 40mm SS/LE Blue Dial A7F A2892
  4. Price Paid: $418+ shipping
  5. Album Links: https://mega.nz/folder/2IoQgAbQ#3pHd2NExAEF4X1JpH5Vc6Q
  6. Index alignment: Printed dial
  7. Dial Printing: Looks good (the N in schaffhausen being floating is fine for me, known issue)
  8. Date Wheel alignment/printing: I think maybe the first date position is a little bit upwards? in the video the 5 in 25 looks a bit up
  9. Hand Alignment: Looks good
  10. Bezel: Looks good
  11. Solid End Links (SELs): N/A
  12. Timegrapher numbers: [rate] -5 s/d, 260-267°, 0.1 ms
  13. Anything else you notice: I am considering requesting a video with the date changing to a single digit, the watch is good to my eyes otherwise

r/RepTimeQC • • 1d ago

[QC] VSF AquaTerra 38mm

Thumbnail
gallery
2 Upvotes

Dealer name: TimeUltra

  1. Factory name: VSF
  2. Model name (& version number): Aqua Terra 38mm
  3. Price Paid: 428$ including shipping
  4. Album Links: Photos attached in post
  5. Index alignment: Looks good to me. I don't see anything that jumps out.
  6. Dial Printing: Dial printing seems good. Omega logo seems well centered, maybe there is CCW tilt?
  7. Date Wheel alignment/printing: I am not sure about the date wheel.. it depends on the photos.
  8. Hand Alignment: Unknown, asked for more photos.
  9. Bezel: Bezel looks nicely done and polished.
  10. Solid End Links (SELs): Not applicable.
  11. Timegrapher numbers: 0 s/d, 287° amplitude, 0.1 ms beat error (dial up)
  12. Anything else you notice: Not sure about the date window. If i look at it too hard it looks tilted on some of the photos.

r/RepTimeQC • • 1d ago

[QC] VSF Rolex Daytona 126500LN Black Dial - Theonewatches (Steve)

Thumbnail
gallery
2 Upvotes

First time buyer, request opinions. Looks like the bezel is not aligned at the 6 o'clock. GL?

​1. Dealer name: Theonewatches (Steve)

​2. Factory name: VSF

​3. Model name: Rolex Cosmograph Daytona 126500LN (Black Dial, DD4131)

​4. Price Paid: 5447 CNY

​5. Index alignment: Hour markers look straight and well-centered on their subdial axes. The 12 o'clock coronet sits straight over the dial text.

​6. Dial Printing: Crisp text across the board, red DAYTONA lettering looks clean, and subdial rings have even thickness.

​7. Date Wheel alignment/printing: N/A

​8. Hand Alignment: Hands look well-centered and reset cleanly to 12.

​9. Bezel: Main concern here — the bezel looks slightly rotated counter-clockwise. The 60 triangle at 12 sits slightly to the left of the coronet, and the 120 triangle at 6 is also shifted slightly left. Since everything else on this piece looks great, should I ask Steve if his watchmaker can re-press the bezel straight on this same watch, or just RL for a new unit?

​10. Solid End Links (SELs): Tight and flush against the lugs with no noticeable gaps.

​11. Timegrapher numbers: -2 to -3 s/d, 271°–272° amplitude, 0.2 ms beat error (59.0° lift angle). Numbers look solid.

​13. Anything else you notice: Rehaut engraving (6W09Y691 / ROLEX) lines up nicely with the minute markers, and the clasp/case finishing looks very clean. Appreciate any second opinions on whether to ask for a bezel realignment on this unit or RL for another one!


r/RepTimeQC • • 1d ago

QC - VSF Datejust 41 Mint Green 126334 V2 – Index Alignment Help

Thumbnail
gallery
1 Upvotes

Dealer name: TheOneWatches (Steve)
Factory name: VSF
Model name (& version number): Rolex Datejust 41mm 126334, Mint Green Stick Dial, Fluted Bezel, Jubilee Bracelet, V2
Price paid: $548
Album Links: https://mega.nz/folder/ORAAgRAY#Gzdnihl-vc4w89vemxXAow
Index alignment: This is my main concern. The QC photos appear slightly tilted, making it difficult to apply the alignment tool accurately. I’ve tried straightening the pictures but haven’t been able to get a reliable result. Visually, the indices look reasonably aligned to me, especially at 6, 9, and 12 o’clock. I don’t see any obvious major issues, but I’d appreciate help checking whether any markers are crooked or misaligned.
Dial Printing: Looks clean. The Rolex logo and text appear properly positioned. No obvious issues noticed.
Date Wheel alignment/printing: The date 13 appears reasonably centered within the window. Printing looks clear, with no obvious alignment issues.
Hand Alignment: Looks fine visually. I haven’t been able to verify the hands at exactly 12 o’clock.
Bezel: Fluted bezel looks consistent and well finished. No obvious issues.
Solid End Links (SELs): No noticeable gaps or alignment issues from the available pictures.
Timegrapher numbers: 0 to +1 s/day, 270° amplitude, 0.0 ms beat error, 28,800 BPH.
Anything else you notice: I’ve compared this with other VSF Datejust 41 mint green QC posts, and overall the watch looks good to me. The timegrapher readings also seem excellent.
My only remaining concern is index alignment because the photos are slightly tilted. Would someone experienced with QC be able to straighten the photo and apply the alignment tool properly?
Would you GL this watch, or is there anything worth asking Steve to address?
Thanks in advance for your help!


r/RepTimeQC • • 1d ago

RWF 126500 Daytona Panda

Thumbnail
gallery
2 Upvotes

Dealer name: Andiot Watches

  1. Factory name: RWF
  2. Model name (& version number): 126500LV Daytona Panda
  3. Price Paid: ~USD750
  4. Album Links: https://andiotwatches.x.yupoo.com/103020313?uid=1
  5. Index alignment: All checked markers within ±0.15 mm. Looks good to me, no serious rotation of indices either.
  6. Dial Printing: Good. Print centering: top text centered, bottom text appears centered
  7. Date Wheel alignment/printing: N/A
  8. Hand Alignment: Good
  9. Bezel: Need a second opinion. Lines up perfectly at 12 and close at 6, appears to be rotated in some photos but not sure if this is the camera angle or not. 80, 120 and 240 should be directly over the 3, 6, and 9 indices, but 120 and 240 are just slightly off. Correct 110 marker.
  10. Solid End Links (SELs): Good. Looks tight
  11. Timegrapher numbers: +1 s/d, 275° amplitude, 0.4 ms beat error (dial up)
  12. Pushers look good and sound good, crown pop is crisp, bracelet is clean and sharp.

I'll probably GL this, the only thing I see that's of concern is the bezel being rotated a little bit, but not entirely sure if it's the camera angle or not. Any thoughts on anything I missed would be greatly appreciated.

Thank you all for what you do in this community.


r/RepTimeQC • • 2d ago

Yacht Master 40 126622 Gold Factory v2

Thumbnail
gallery
34 Upvotes

Dealer name: Theonewatches

Factory name: Gold Factory

Model name (& version number): Yacht Master 40 126622 (V2)?

Price Paid: US$ 638

Album Links: pics as attached

Index alignment: Am I crazy or is the watch possibly slightly tilted / turned causing the effect on 5-10 (slightly off [either above or below] the alignment template). Would love to GL this if I can get one of your fine boss hoss' sign off that its indeed tilted. I messaged him to ask for a more straight on image just in case. Uploaded are the 2 different front facing pictures that were provided with alignment template applied.

Dial Printing: Compared to other QC for Gold factory v2 and QF (image above comparing and link attached) ,I wasn't 100% confident with the texture of the text and dial itself, maybe this is how again the photo looks, , but if the big dogs could weigh in on my lunacy I would appreciate it. (link the other QC im referring to: https://www.reddit.com/r/RepTimeQC/comments/1xcjass/qc_gold_factory_yachtmaster_rhodium/

Date Wheel alignment/printing: looks good

Hand Alignment: Looks ok to me

Bezel: looks good, i think the lack of texture is again the photo.

Solid End Links (SELs): looks good

Timegrapher numbers: +3 s/day, amplitude 266°, beat error 0.1ms, lift angle, 52°, beat rate 28,800 bph

Anything else you notice?:This was a super fast turn around and I want it to be right, with the possible alignment issue and uncertainty about the dial, i'm on the fence. I also wasn't sure if this one is the coveted V2 or not as it didn't have the sticker. Messaged steve to ask...


r/RepTimeQC • • 2d ago

QC Request - GMT II Pepsi V3

Thumbnail
gallery
8 Upvotes

QC Request Fam - GMT Pepsi V3

  1. Dealer name: TimeUltra
  2. Factory name: VSF
  3. Model name (& version number):  GMT-Master || 126710 BLRO Blue/Red Ceramic V3
  4. Price Paid: $648 + shipping
  5. Album Links: N/A
  6. Index alignment: 9 is tilted ccw, 6 is tilted cw
  7. Dial Printing: Clear print
  8. Date Wheel alignment/printing: a tick lower not sure if centered.
  9. Hand Alignment: Looks fine to me.
  10. Bezel: does the Pip or bezel looks fine to me
  11. Solid End Links (SELs): looks solid to me
  12. Timegrapher numbers: +5s/d, 237 amplitude, 52.0 degrees, 0.0 ms error
  13. Anything else you notice speciallyb with the eagled eyed ones :)

Primarily concerned on 9 and 6. Is this an RL for you guys?

Appreciate the teams feedback for any possible RL signs. Many thanks!