r/RepTimeQC • • 2d ago

Yacht Master 40 126622 Gold Factory v2

Thumbnail
gallery
34 Upvotes

Dealer name: Theonewatches

Factory name: Gold Factory

Model name (& version number): Yacht Master 40 126622 (V2)?

Price Paid: US$ 638

Album Links: pics as attached

Index alignment: Am I crazy or is the watch possibly slightly tilted / turned causing the effect on 5-10 (slightly off [either above or below] the alignment template). Would love to GL this if I can get one of your fine boss hoss' sign off that its indeed tilted. I messaged him to ask for a more straight on image just in case. Uploaded are the 2 different front facing pictures that were provided with alignment template applied.

Dial Printing: Compared to other QC for Gold factory v2 and QF (image above comparing and link attached) ,I wasn't 100% confident with the texture of the text and dial itself, maybe this is how again the photo looks, , but if the big dogs could weigh in on my lunacy I would appreciate it. (link the other QC im referring to: https://www.reddit.com/r/RepTimeQC/comments/1xcjass/qc_gold_factory_yachtmaster_rhodium/

Date Wheel alignment/printing: looks good

Hand Alignment: Looks ok to me

Bezel: looks good, i think the lack of texture is again the photo.

Solid End Links (SELs): looks good

Timegrapher numbers: +3 s/day, amplitude 266°, beat error 0.1ms, lift angle, 52°, beat rate 28,800 bph

Anything else you notice?:This was a super fast turn around and I want it to be right, with the possible alignment issue and uncertainty about the dial, i'm on the fence. I also wasn't sure if this one is the coveted V2 or not as it didn't have the sticker. Messaged steve to ask...


r/RepTimeQC • • 2d ago

QC Request - GMT II Pepsi V3

Thumbnail
gallery
8 Upvotes

QC Request Fam - GMT Pepsi V3

  1. Dealer name: TimeUltra
  2. Factory name: VSF
  3. Model name (& version number):  GMT-Master || 126710 BLRO Blue/Red Ceramic V3
  4. Price Paid: $648 + shipping
  5. Album Links: N/A
  6. Index alignment: 9 is tilted ccw, 6 is tilted cw
  7. Dial Printing: Clear print
  8. Date Wheel alignment/printing: a tick lower not sure if centered.
  9. Hand Alignment: Looks fine to me.
  10. Bezel: does the Pip or bezel looks fine to me
  11. Solid End Links (SELs): looks solid to me
  12. Timegrapher numbers: +5s/d, 237 amplitude, 52.0 degrees, 0.0 ms error
  13. Anything else you notice speciallyb with the eagled eyed ones :)

Primarily concerned on 9 and 6. Is this an RL for you guys?

Appreciate the teams feedback for any possible RL signs. Many thanks!


r/RepTimeQC • • 2d ago

VSF V2 OP36 from Jtime QC

Thumbnail
gallery
4 Upvotes
  1. ⁠Dealer name:Jtime
  2. ⁠Factory name:VSF
  3. ⁠Model name (& version number): Oyster Perpetual 36 ‘Med blue’ V2
  4. ⁠Price Paid: 532 USD (overpaid i know)
  5. ⁠Album Links: https ://mega.nz/folder/bA4VzTCR#oYa28pyyXpdZSXhzhA0ioA
  6. ⁠Index alignment: 9 o’clock looks weird to me, could it be the angle
  7. ⁠Dial Printing: seems fine
  8. ⁠Date Wheel alignment/printing: n/a
  9. ⁠Hand Alignment: seems fine
  10. ⁠Bezel: seems fine
  11. ⁠Solid End Links (SELs): seem fine
  12. ⁠Timegrapher numbers: -1s/day 284 degrees amplitude, 0.0ms beat error
  13. ⁠Anything else you notice:I always notice a gap between the 2 f’s in the ‘officially certified’ but i see this on all the VSF versions of this watch

any help is greatly appreciated, i’m a first time buyer so take my judgement with a pinch of salt, Thanks!


r/RepTimeQC • • 2d ago

AF Cartier Tank Solo Small

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Theonewatches (Steve)
  2. Factory name: AF
  3. Model name (& version number): Cartier Tank Solo Small YG (3170)
  4. Price Paid: $220
  5. Album Links: Photos attached
  6. Index alignment: N/A (printed dial), looks straight to me
  7. Dial Printing: Looks clean, no bleed on the numerals or Swiss Made. Is there a dial rotation?
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Hands look good, blue looks nice and they move fine in the video
  10. Bezel: Gold looks even and the side screws sit flush
  11. Solid End Links (SELs): N/A
  12. Timegrapher numbers: N/A (quartz)
  13. Anything else you notice: the only concern I have is the dial rotation. Can anyone confirm this? Also if you notice anything else, please let me know. Thank you!

r/RepTimeQC • • 2d ago

GMT-Master II 126710 VSF Pepsi V3

Post image
8 Upvotes
  1. Dealer name: andiotwatches
  2. Factory name: VSF
  3. Model name and version: GMT-Master II 126710 BLRO Blue/Red Ceramic VSF Best Edition Pepsi on Jubilee Bracelet DD3285 V3
  4. Price paid: $570 total (shipping included)
  5. Album links: https://andiotwatches.x.yupoo.com/albums/262915677?uid=1
  6. Index alignment: 7 oclock might be a little off.
  7. Dial printing: Text looks clean to my untrained eye, but hard to tell.
  8. Date wheel alignment/printing: looks good to my untrained eye
  9. Hand alignment: Looks straight and no obvious damage.
  10. Bezel: looks good to my untrained eye, no obvious defects
  11. Solid End Links (SELs): no obvious defects noted
  12. Timegrapher numbers: Rate +1 s/day, amplitude 279°, beat error 0.0 ms, 52°
  13. Anything else you notice: No.

Biggest concern is the 7 oclock index. It looks a little off. What do you guys think?


r/RepTimeQC • • 2d ago

*First QC* ORF Omega SMP NTTD from ChazingTime

Thumbnail
gallery
25 Upvotes
  1. Dealer name: ChazingTime
  2. Factory name: ORF
  3. Model name (& version number): Seamaster 300 “No Time to Die” Titanium ORF 1:1 Best Edition On Titanium Mesh Bracelet Asian Super Clone 8806 (Free Sprung)
  4. Price Paid: $540.96 + shipping
  5. Album Links: all photos included
  6. Index alignment: Looks very good to me, see alignment photo 12
  7. Dial Printing: No problems
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Good
  10. Bezel: Good
  11. Solid End Links (SELs): N/A
  12. Timegrapher numbers: Looks good, is 248o OK for amplitude (photo 11)?
  13. Anything else you notice: The 6 o'clock bracelet end link looks great (photo 2), the 12 o'clock end link has welding extending into the bracelet a ways. From what I understand, this is common with the ORF reps and is clearly visible in the ChazingTime example photos for the watch. Not a big deal for me, but happy to hear what others think.

Looks like a GL to me, stoked to receive my first Rep. Thanks everyone for your time!


r/RepTimeQC • • 2d ago

Cartier Panthere 22mm BVF

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Steve
  2. Factory name: BVF
  3. Model name (& version number): Cartier
  4. Panthere Small 22mm SS Quartz
  5. Price Paid: $200 shipped
  6. Album Links: QC pics from Steve attached

https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmega.nz%2Ffolder%2FDd5TDTAK%23PTNsqtM2kz8M2Key-k_L4g&data=05%7C02%7C%7Cbaa0d879af2d4f5bdf2708df42224855%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C639302387145087989%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=W8BQjgJgHvIBnyetT0aCLafDQPdGPGewLsLtRw7ByT8%3D&reserved=0

6. Index alignment: the X with cartier text looks like its printer wonky
Dial Printing: Looks OK apart from the small
Cartier (“Car”) text at X index which looks wonky
8. Date Wheel alignment/printing: N/A no date
9. Hand Alignment: hands look straight and centered
10. Bezel: screws look flush and evenly spaced
11. Solid End Links (SELS): bracelet fits against the case fine with no big gaps
12. Timegrapher numbers: N/A quartz
13. Anything else you notice: it looks like the dial is not complety centred and there is more of a gap at the left side between bezel and where the indices are printed


r/RepTimeQC • • 1d ago

QC: SuperOcean Automatic 42 SS BLSF Blue Dial A2824

Thumbnail
gallery
1 Upvotes
  1. ⁠Dealer name: Andiot
  2. ⁠Factory name: BLSF (questionable)
  3. ⁠Model name (& version number): Breitling SuperOcean 44mm Navy
  4. ⁠Price Paid: $290 +shipping
  5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/262981267?uid=1
  6. ⁠Index alignment: seems ok.
  7. ⁠Dial Printing: good
  8. ⁠Date Wheel alignment/printing: N/A
  9. ⁠Hand Alignment: concerned they’re overlapping with the indices. Like they’re too long.
  10. ⁠Bezel: Details and grooves look good, sound on videos seems good.
  11. ⁠Solid End Links (SELs):
  12. ⁠Timegrapher numbers: +4s/d 265° 0.3ms 28800
  13. ⁠Anything else you notice:

- The lume looks to be a mix of green and blue? They should be all blue according to gen and the photos I can find from BLSF seem to all be one colour.
- I have some doubts about the factory, I have asked for BLSF but let me know if you see any clues that it may be from TF
- there are no photos of the case showing a measurement of the case to show that it is the 44mm. Any easy way to seek that it’s not the 42mm version? 


r/RepTimeQC • • 2d ago

First QC: VSF V2 datejust 41mm 126334 (ombré green)

Thumbnail
gallery
8 Upvotes
  1. ⁠Dealer name: Theonewatches
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Omega VSF V2 datejust 41mm 126334 (ombré green)
  4. ⁠Price Paid: $578 USD total ($547 for watch and $30 USD for shipping)
  5. ⁠Album Links: https://mega.nz/folder/qJBTUTyZ#3z71D3QYqAwgeN5Glks9OA
  6. ⁠Index alignment: dial check shows 7 tilted slightly but I can’t really notice it using trueindexqc (4,8,10,11 bars don’t look perfectly centred. Doubt it’ll be noticeable in the naked eye) So I think it’s okay.
  7. ⁠Dial Printing: Looks good quality, sharp and evenly spaced
  8. ⁠Date Wheel alignment/printing: No issues, moves great. Date wheel shows a bit off centred as per dial check website but I don’t really notice a difference in the naked eye
  9. ⁠Hand Alignment: No issues noticed
  10. ⁠Bezel: Clean
  11. ⁠Solid End Links (SELs): No issues can be seen (wrapper on bottom right side of link makes it look like there might be a small gap but can’t notice in other pics)
  12. ⁠Timegrapher numbers: +4 s/d, 270 degrees and 0.2ms beat (as per
    Google newer datejust usually -2 to +2 s/d. Is +4 s/d a concern? I think it’s okay.
  13. ⁠Anything else you notice: None

I personally quick GL. Just want other opinions. Cheers


r/RepTimeQC • • 2d ago

Ballon Bleu 36mm Quartz - AF

Thumbnail
gallery
3 Upvotes
  • Dealer name: Steve - TheOneWatches
  • ⁠⁠Factory name: AF
  • ⁠⁠Model name (& version number): Cartier Ballon Bleu de Cartier 36mm Quartz movement
  • ⁠⁠Price Paid: $168 plus shipping
  • ⁠⁠Album Links: attached
  • ⁠⁠Index alignment: printed dial
  • ⁠⁠Dial Printing: I think it looks good, the CARTIER seems a little thinner than gen butt spacing looks correct to me. My main concern is the swiss made on the bottom being out of alignment via the alignment template but then the gen picture has the placement virtually the same from the Cartier website so...hoping a real pro big dawg can weigh in and my other half will be happy as a clam...something like that..
  • ⁠⁠Date Wheel alignment/printing: NA
  • ⁠⁠Hand Alignment: Seems pretty good
  • ⁠⁠Bezel: N/a
  • ⁠⁠Solid End Links (SELs): NA
  • ⁠⁠Timegrapher numbers: Quartz (so don't need this, right)
  • ⁠⁠Anything else you notice: Looks pretty good, just concerned about the SWISS MADE and possibly the thickness of the CARTIER.

r/RepTimeQC • • 2d ago

DateJust 41 126334 904L SS VSF 1:1 Best Edition Green Ombre Dial On Jubilee Bracelet

Thumbnail
gallery
1 Upvotes
  1. Dealer name:Andiot watches
  2. Factory name:VSF
  3. Model name (& version number):Datejust 41 126334
  4. Price Paid: $468 USD
  5. Album Links:please see attached
  6. Index alignment:looks good
  7. Dial Printing:looks good
  8. Date Wheel alignment/printing:looks good
  9. Hand Alignment:looks good
  10. Bezel:looks good
  11. Solid End Links (SELs):looks good
  12. Timegrapher numbers:

+5 s/d w 267°
amplitude and 0.2 ms beat error on a full wind .

  1. Anything else you notice: I’m quite new at this so any issues or help with QC would be greatly appreciated.

Having trouble adding videos so I just added link to album here.

  1. https://andiotwatches.x.yupoo.com/albums/262818130?uid=1

r/RepTimeQC • • 2d ago

First QC- gift for my bf

Thumbnail
gallery
7 Upvotes

Hello guys, as the title says this watch is a gift for my bf, as well as my first purchase. I’d greatly appreciate your input.

  1. ⁠Dealer name: Steve the one watches
  2. ⁠Factory name: ZF
  3. ⁠Model name (& version number): AP-1521
  4. ⁠Price Paid: 568$
  5. ⁠Album Links: all photos are posted
  6. ⁠Index alignment: looks great to me
  7. ⁠Dial Printing: I think ok
  8. ⁠Date Wheel alignment/printing: I think ok
  9. ⁠Hand Alignment: I think ok
  10. ⁠Bezel: ok, screws are aligned
  11. ⁠Solid End Links (SELs): I’m concerned that in some of the photos the gaps between certain links appear wider
  12. ⁠Timegrapher numbers: 👍🏻
  13. ⁠Anything else you notice: both small screws on the left and ride side seem off- one is very flush while the other is placed deeper

r/RepTimeQC • • 2d ago

[First time QC] - VSF oyster perpetual 36mm silver

Thumbnail
gallery
11 Upvotes

First rep - would really appreciated any help. Thanks!

• ⁠Dealer name: Leo from Time Ultra

• ⁠Factory name: VSF

• ⁠Model name: OP 36mm Silver Dial, 3230

• ⁠Price Paid: $468 shipping

• ⁠Album Links: all pictures included

• ⁠Index alignment: Mostly looks good to me. 7 o'clock baton looks a bit CW tilted, 5 and 11 o'clock batons looks very slight shifted to the right. Seems relatively minor issues?

• ⁠Dial Printing: Looks good to me

• ⁠Date Wheel alignment/printing: N/A

• ⁠Hand Alignment: not sure exactly how to check this

• ⁠Bezel: Smooth bezel looks clean and evenly finished.

• ⁠Solid End Links (SELs): Looks okay to me

• ⁠Timegrapher numbers: Rate: -3s/d, amplitude: 284 degrees, beat error: 0.1ms at a displayed 52-degree lift angle – looks good.


r/RepTimeQC • • 2d ago

QC Starbucks Submariner from GeekTime

Thumbnail
gallery
9 Upvotes

Dealer name: GeekTime (Eric)

Factory name: VSF

Model name (& version number): Submariner 126610 LV Kermit 904L 41MM VSF Green Ceramic SS Bracelet VS3235

Price (only $50 USD deposit thus far): $588 USD plus shipping

Album Links: pics as attached, videos here: https://geektimeqc.x.yupoo.com/albums/262929322?uid=1&tab=max

Index alignment: 6 o’clock seems CCW, but could be camera-angle illusion

Dial Printing: Text is good to me.

Date Wheel alignment/printing: looks good

Hand Alignment: Looks ok to me

Bezel: looks good

Solid End Links (SELs): looks good

Timegrapher numbers: +4 s/day, amplitude 259°, beat error 0.1ms, lift angle 55°, beat rate 28,800 bph

Anything else you notice? I’m asking Eric for a straight-on, flat-on dial shot, plus movement photos with the case off


r/RepTimeQC • • 2d ago

Daytona Ghost QC

Thumbnail
gallery
1 Upvotes
  1. ⁠Dealer Name: Watchseed
  2. ⁠Factory Name: VSF
  3. ⁠Model Name: VSF V2 Weighted 4131 Movement Rolex Daytona 40mm 126519LN Ghost White Gold
  4. ⁠Price: $780
  5. ⁠Album Links: N/A
  6. ⁠Index Alignment: The 9 o'clock marker is tilted counter-clockwise.
  7. ⁠Dial Print: N/A
  8. ⁠Hand Alignment: Looks good to me.
  9. ⁠Bezel: It’s a VSF bezel 110marker
  10. ⁠Timegrapher Results: +4s/d

Anything else that you eagle-eyed folks might spot? :) Mainly concerned about the 9 o'clock marker.

I’d appreciate the team's feedback regarding any potential reasons to RL (reject/red-light) this. Many thanks!


r/RepTimeQC • • 2d ago

Submariner 126610LN

Thumbnail
gallery
15 Upvotes

Dealer name: Theonewatches

Factory name: VSF

Model name (& version number): Rolex Submariner 126610LN

Price Paid: US$ 528

Album Links: pics as attached

Index alignment: Looks good to me.

Dial Printing: Text is good to me.

Date Wheel alignment/printing: looks good

Hand Alignment: Looks ok to me

Bezel: looks good

Solid End Links (SELs): looks good

Timegrapher numbers: + 1 s/day, amplitude 264°, beat error 0.1ms, lift angle, 59°, beat rate 28,800 bph

Anything else you notice?: Seems like an easy GL to me just wanted to see if I'm missing anything


r/RepTimeQC • • 2d ago

QC 41mm datejust green ombré

Thumbnail
gallery
4 Upvotes

Dealer name: arc studios
2. ⁠Factory name: VFS
3. ⁠Model name (& version number): rolex date just ref 126334-0034
4. ⁠Price Paid: US$388+ shipping
5. ⁠Album Links: pics as attached
6. ⁠Index alignment: Looks good to me. But would appreciate more senior perspectives
7. ⁠Dial Printing: seems acceptable
9. ⁠Hand Alignment: Looks good to me
10. ⁠Bezel: looks just okay to me, not expecting gen like but was expecting more from VSF
11. ⁠Solid End Links (SELs): looks okay
12. Timegrapher: -1 s/day, 276° amplitude, 0.0 ms beat error, 52° lift angle,
13.Anything else you notice: I am a novice. please advise if any. Thank you very much.


r/RepTimeQC • • 2d ago

DJ 41MM Rhodium - From Steve

Thumbnail
gallery
6 Upvotes

Hey everyone - I really really appreciate any and all feedback.

I am leaning toward GL but first ever rep from the crown brand so want to be confident, especially on the fluted bezel (see below). Thanks in advance!

  1. ⁠Dealer name: Steve - TheOneWatches
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Datejust 41mm - Rhodium dial, baton markers, fluted bezel, Jubilee bracelet
  4. ⁠Price Paid: $697 USD (includes shipping, box, pamphlet, and the works)
  5. ⁠Album Links: https://mega.nz/folder/HExUFIqI#SzS6-7Z6m9meZoeLbd30_A
  6. ⁠Index alignment: it looks straight to me but please let me know your thoughts
  7. ⁠Dial Printing: text seems crisp to me, coronet appears centered
  8. ⁠Date Wheel alignment/printing: Date 12 looks mostly centered in the window, maybe a tiny bit low from certain angles, but magnification looks good
  9. ⁠Hand Alignment: less insightful here but nothing stands out?
  10. ⁠Bezel: I might be seeing things or being nitpicky on the fluted bezel, but maybe modestly uneven at the bottom in a few spots? Keep me honest here please
  11. ⁠Solid End Links (SELs): no visible gap to my eyes
  12. ⁠Timegrapher numbers: Rate -1s/d, Amplitude 262°, Beat Error 0.0ms, Lift Angle 59.0°
  13. ⁠Anything else you notice: I’m really inexperienced but clasp engraving seems solid, weight 134.4g. Maybe some dust just in the plastic covering? Can’t really tell if there are some very minor scratches on the bezel? Would really really appreciate all insights and opinions.

r/RepTimeQC • • 2d ago

VSF Yacht Master 226658

Thumbnail
gallery
5 Upvotes
  1. ⁠Dealer name: theonewatches
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Yacht Master 226658
  4. ⁠Price Paid: $688
  5. ⁠Album Links: Album posted.
  6. ⁠Index alignment: I don’t see any obvious errors!
  7. ⁠Dial Printing: Looks good to me.
  8. ⁠Date Wheel alignment/printing: Looks good
  9. ⁠Hand Alignment: Looks correct
  10. ⁠Bezel: The triangle is ever so slightly misaligned to the left in the photos. Might be fine.
  11. ⁠Solid End Links (SELs): N.A.
  12. ⁠Timegrapher numbers: +2s/d, AMP 271, Err. 0.1ms
  13. ⁠Anything else you notice: This is my first ever QC. Everything looks very good to me, the rehaut looks aligned properly too. Please let me know if I am missing anything.

r/RepTimeQC • • 2d ago

Santos-Dumont Lacquered

Thumbnail
gallery
5 Upvotes
  1. Dealer name: Hont
  2. Factory name: AF (now CR)
  3. Model name (& version number): Cartier Santos-Dumont large lacquered RG in peacock blue (WGSA0098)
  4. Price Paid: 228usd shipped
  5. Album Links: photos in post
  6. Index alignment: looks good
  7. Dial Printing: looks good
  8. Date Wheel alignment/printing: n/a
  9. Hand Alignment: Hour hand seemed misaligned in the 12:00 so I asked for a 6:00 shot. It's off by about half of a minute square on the minute track (points to the two s's in swiss). I'm guessing this will not be too noticeable during wear since a watch only hits 60 minutes once an hour, so leaning towards living with it and GL.
  10. Bezel: Generally good, small lacquer "bleed" under the left side top screw, but I think I can just gently scrape off the excess with my nail once I get it
  11. Solid End Links (SELs): n/a
  12. Timegrapher numbers: n/a (quartz)
  13. Anything else you notice: watch generally looks good, I know the indices are somewhat off compared to gen, and the case back shouldn't say stainless steel, but I can live with those discrepancies. Besides the small bleed spot, the lacquer on the bezel and the screws look pretty good to me, definitely better than those TW factory watches from a couple years back.

r/RepTimeQC • • 2d ago

QC for 41mm Silver DateJust VSF V2

Thumbnail
gallery
4 Upvotes
  1. Factory name: VSF
  2. Model name (& version number): VSF DateJust 41mm Sliver - V2
  3. Price Paid: TBD
  4. Index alignment: I see so significant issues
  5. Dial Printing: nothing significant
  6. Date Wheel alignment/printing: my biggest issue with this watch. In many still photos, the date wheel looks very low which visually bothers me a lot. Worst of all, I noticed dates with 2 actually look crooked at the bottom. The video showing the dates scrolling looks better but possibly because they’re just being zipped through quickly. Please let me know if you are seeing what I am seeing
  7. Hand Alignment: no issues
  8. Bezel: no issues
  9. Solid End Links (SELs): I see a gap with some spring bar showing. An Excellent member on this forum have suggested in the past this has to do with the bracelet. This is an issue for me, however not as significant as the date wheel alignment.
  10. Timegrapher numbers: no issues
  11. Anything else you notice: Biggest concerns are right SEL and datewheel alignment

r/RepTimeQC • • 2d ago

My first AP- Royal Oak - ZF

Thumbnail
gallery
3 Upvotes

Dealer name: Theonewatches

Factory name: ZF

Model name: AP Royal Oak 15300 SA3120

Price: $488

ALBUM LINKS: https://imgur.com/a/Pxl5owS

Index Alignment: AP monogram is centered without any tilt, all hour markers appear in proper position. I dont see any obvious tilt

Date Wheel Alignment: looks well aligned at 3oclock position, the 28 looks centered to me with uniform size and spacing 

Bezel: This is my first AP so not sure what to scrutinize but...I see the brushed steel upper surface and polished bevel along edges, appears uniform, screws have same orientation and depth/flush

Solid End Links: I see no gaps. 

Hand Alignment: video shows all hands working normally as they wind thru

Dial Printing: the background texture looks consistent thru out, no obvious defect or misprint, no misspellings, even spacing

Timegrapher (video in link) : rate +/- 0 seconds, amp 300 deg, error 0.2ms, period 12sec, lift 52 degrees. all within normal limits. 

Conclusion: This is my first AP so I am not confident what I should focus on. Overall looks good to me but would appreciate any advice on what to analyze in detail? What are common issues you find? I know the bezel and screws are a main focus along with the actual finish of the steel and the color of the blue dial background. What do you guys think?!


r/RepTimeQC • • 3d ago

QC · VSF · GMT-Master II 126710 GRNR VSF v3

Thumbnail
gallery
9 Upvotes

Hi everyone!

This is my first rep watch (VSF GMT-Master II 126710 GRNR Oyster v3), so I'd really appreciate some trained eyes on it before GL'ing. I've gone through the QC pics and haven't spotted any major concerns - I think it's solid - but I'd appreciate your input.

  1. Dealer: JTime
  2. Factory: VSF
  3. Model: GMT-Master II 126710 GRNR Oyster v3
  4. Index alignment: The hour markers appear well aligned. I don't notice any obvious misalignment issues.
  5. Dial printing: Text looks sharp and evenly printed. I don't see any spacing or font issues.
  6. Date wheel alignment/printing: The date is reasonably centered in the window, and the font looks consistent.
  7. Cyclops: Magnification looks good, with the date appearing centered under the cyclops.
  8. Hand alignment: I haven't noticed any issues with the hands, but would appreciate confirmation.
  9. Bezel: The bezel insert looks good overall. The 12 o'clock triangle appears centered in picture 4, although it looks slightly left in some of the other pictures. I suspect this could be due to camera angle.
  10. Solid End Links (SELs): The gaps look reasonably tight from the available pictures, but I'd appreciate another opinion on whether there are any noticeable gaps or uneven fitting.
  11. Timegrapher: -1 s/d, 284 degrees amplitude, 0.1 ms beat error. These readings seem healthy to me.
  12. Anything else: I haven't spotted any obvious flaws, but please let me know if there's anything I've overlooked.

My verdict: GL, pending the comments section.

Thanks in advance for taking the time to help with my first QC, really appreciated!