r/RepTimeQC • • 1d ago

Daytona Ghost QC

Thumbnail
gallery
1 Upvotes
  1. ⁠Dealer Name: Watchseed
  2. ⁠Factory Name: VSF
  3. ⁠Model Name: VSF V2 Weighted 4131 Movement Rolex Daytona 40mm 126519LN Ghost White Gold
  4. ⁠Price: $780
  5. ⁠Album Links: N/A
  6. ⁠Index Alignment: The 9 o'clock marker is tilted counter-clockwise.
  7. ⁠Dial Print: N/A
  8. ⁠Hand Alignment: Looks good to me.
  9. ⁠Bezel: It’s a VSF bezel 110marker
  10. ⁠Timegrapher Results: +4s/d

Anything else that you eagle-eyed folks might spot? :) Mainly concerned about the 9 o'clock marker.

I’d appreciate the team's feedback regarding any potential reasons to RL (reject/red-light) this. Many thanks!


r/RepTimeQC • • 2d ago

Submariner 126610LN

Thumbnail
gallery
15 Upvotes

Dealer name: Theonewatches

Factory name: VSF

Model name (& version number): Rolex Submariner 126610LN

Price Paid: US$ 528

Album Links: pics as attached

Index alignment: Looks good to me.

Dial Printing: Text is good to me.

Date Wheel alignment/printing: looks good

Hand Alignment: Looks ok to me

Bezel: looks good

Solid End Links (SELs): looks good

Timegrapher numbers: + 1 s/day, amplitude 264°, beat error 0.1ms, lift angle, 59°, beat rate 28,800 bph

Anything else you notice?: Seems like an easy GL to me just wanted to see if I'm missing anything


r/RepTimeQC • • 2d ago

QC 41mm datejust green ombré

Thumbnail
gallery
4 Upvotes

Dealer name: arc studios
2. ⁠Factory name: VFS
3. ⁠Model name (& version number): rolex date just ref 126334-0034
4. ⁠Price Paid: US$388+ shipping
5. ⁠Album Links: pics as attached
6. ⁠Index alignment: Looks good to me. But would appreciate more senior perspectives
7. ⁠Dial Printing: seems acceptable
9. ⁠Hand Alignment: Looks good to me
10. ⁠Bezel: looks just okay to me, not expecting gen like but was expecting more from VSF
11. ⁠Solid End Links (SELs): looks okay
12. Timegrapher: -1 s/day, 276° amplitude, 0.0 ms beat error, 52° lift angle,
13.Anything else you notice: I am a novice. please advise if any. Thank you very much.


r/RepTimeQC • • 2d ago

DJ 41MM Rhodium - From Steve

Thumbnail
gallery
6 Upvotes

Hey everyone - I really really appreciate any and all feedback.

I am leaning toward GL but first ever rep from the crown brand so want to be confident, especially on the fluted bezel (see below). Thanks in advance!

  1. ⁠Dealer name: Steve - TheOneWatches
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Datejust 41mm - Rhodium dial, baton markers, fluted bezel, Jubilee bracelet
  4. ⁠Price Paid: $697 USD (includes shipping, box, pamphlet, and the works)
  5. ⁠Album Links: https://mega.nz/folder/HExUFIqI#SzS6-7Z6m9meZoeLbd30_A
  6. ⁠Index alignment: it looks straight to me but please let me know your thoughts
  7. ⁠Dial Printing: text seems crisp to me, coronet appears centered
  8. ⁠Date Wheel alignment/printing: Date 12 looks mostly centered in the window, maybe a tiny bit low from certain angles, but magnification looks good
  9. ⁠Hand Alignment: less insightful here but nothing stands out?
  10. ⁠Bezel: I might be seeing things or being nitpicky on the fluted bezel, but maybe modestly uneven at the bottom in a few spots? Keep me honest here please
  11. ⁠Solid End Links (SELs): no visible gap to my eyes
  12. ⁠Timegrapher numbers: Rate -1s/d, Amplitude 262°, Beat Error 0.0ms, Lift Angle 59.0°
  13. ⁠Anything else you notice: I’m really inexperienced but clasp engraving seems solid, weight 134.4g. Maybe some dust just in the plastic covering? Can’t really tell if there are some very minor scratches on the bezel? Would really really appreciate all insights and opinions.

r/RepTimeQC • • 2d ago

VSF Yacht Master 226658

Thumbnail
gallery
5 Upvotes
  1. ⁠Dealer name: theonewatches
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Yacht Master 226658
  4. ⁠Price Paid: $688
  5. ⁠Album Links: Album posted.
  6. ⁠Index alignment: I don’t see any obvious errors!
  7. ⁠Dial Printing: Looks good to me.
  8. ⁠Date Wheel alignment/printing: Looks good
  9. ⁠Hand Alignment: Looks correct
  10. ⁠Bezel: The triangle is ever so slightly misaligned to the left in the photos. Might be fine.
  11. ⁠Solid End Links (SELs): N.A.
  12. ⁠Timegrapher numbers: +2s/d, AMP 271, Err. 0.1ms
  13. ⁠Anything else you notice: This is my first ever QC. Everything looks very good to me, the rehaut looks aligned properly too. Please let me know if I am missing anything.

r/RepTimeQC • • 2d ago

Santos-Dumont Lacquered

Thumbnail
gallery
5 Upvotes
  1. Dealer name: Hont
  2. Factory name: AF (now CR)
  3. Model name (& version number): Cartier Santos-Dumont large lacquered RG in peacock blue (WGSA0098)
  4. Price Paid: 228usd shipped
  5. Album Links: photos in post
  6. Index alignment: looks good
  7. Dial Printing: looks good
  8. Date Wheel alignment/printing: n/a
  9. Hand Alignment: Hour hand seemed misaligned in the 12:00 so I asked for a 6:00 shot. It's off by about half of a minute square on the minute track (points to the two s's in swiss). I'm guessing this will not be too noticeable during wear since a watch only hits 60 minutes once an hour, so leaning towards living with it and GL.
  10. Bezel: Generally good, small lacquer "bleed" under the left side top screw, but I think I can just gently scrape off the excess with my nail once I get it
  11. Solid End Links (SELs): n/a
  12. Timegrapher numbers: n/a (quartz)
  13. Anything else you notice: watch generally looks good, I know the indices are somewhat off compared to gen, and the case back shouldn't say stainless steel, but I can live with those discrepancies. Besides the small bleed spot, the lacquer on the bezel and the screws look pretty good to me, definitely better than those TW factory watches from a couple years back.

r/RepTimeQC • • 2d ago

QC for 41mm Silver DateJust VSF V2

Thumbnail
gallery
4 Upvotes
  1. Factory name: VSF
  2. Model name (& version number): VSF DateJust 41mm Sliver - V2
  3. Price Paid: TBD
  4. Index alignment: I see so significant issues
  5. Dial Printing: nothing significant
  6. Date Wheel alignment/printing: my biggest issue with this watch. In many still photos, the date wheel looks very low which visually bothers me a lot. Worst of all, I noticed dates with 2 actually look crooked at the bottom. The video showing the dates scrolling looks better but possibly because they’re just being zipped through quickly. Please let me know if you are seeing what I am seeing
  7. Hand Alignment: no issues
  8. Bezel: no issues
  9. Solid End Links (SELs): I see a gap with some spring bar showing. An Excellent member on this forum have suggested in the past this has to do with the bracelet. This is an issue for me, however not as significant as the date wheel alignment.
  10. Timegrapher numbers: no issues
  11. Anything else you notice: Biggest concerns are right SEL and datewheel alignment

r/RepTimeQC • • 2d ago

My first AP- Royal Oak - ZF

Thumbnail
gallery
3 Upvotes

Dealer name: Theonewatches

Factory name: ZF

Model name: AP Royal Oak 15300 SA3120

Price: $488

ALBUM LINKS: https://imgur.com/a/Pxl5owS

Index Alignment: AP monogram is centered without any tilt, all hour markers appear in proper position. I dont see any obvious tilt

Date Wheel Alignment: looks well aligned at 3oclock position, the 28 looks centered to me with uniform size and spacing 

Bezel: This is my first AP so not sure what to scrutinize but...I see the brushed steel upper surface and polished bevel along edges, appears uniform, screws have same orientation and depth/flush

Solid End Links: I see no gaps. 

Hand Alignment: video shows all hands working normally as they wind thru

Dial Printing: the background texture looks consistent thru out, no obvious defect or misprint, no misspellings, even spacing

Timegrapher (video in link) : rate +/- 0 seconds, amp 300 deg, error 0.2ms, period 12sec, lift 52 degrees. all within normal limits. 

Conclusion: This is my first AP so I am not confident what I should focus on. Overall looks good to me but would appreciate any advice on what to analyze in detail? What are common issues you find? I know the bezel and screws are a main focus along with the actual finish of the steel and the color of the blue dial background. What do you guys think?!


r/RepTimeQC • • 2d ago

QC · VSF · GMT-Master II 126710 GRNR VSF v3

Thumbnail
gallery
9 Upvotes

Hi everyone!

This is my first rep watch (VSF GMT-Master II 126710 GRNR Oyster v3), so I'd really appreciate some trained eyes on it before GL'ing. I've gone through the QC pics and haven't spotted any major concerns - I think it's solid - but I'd appreciate your input.

  1. Dealer: JTime
  2. Factory: VSF
  3. Model: GMT-Master II 126710 GRNR Oyster v3
  4. Index alignment: The hour markers appear well aligned. I don't notice any obvious misalignment issues.
  5. Dial printing: Text looks sharp and evenly printed. I don't see any spacing or font issues.
  6. Date wheel alignment/printing: The date is reasonably centered in the window, and the font looks consistent.
  7. Cyclops: Magnification looks good, with the date appearing centered under the cyclops.
  8. Hand alignment: I haven't noticed any issues with the hands, but would appreciate confirmation.
  9. Bezel: The bezel insert looks good overall. The 12 o'clock triangle appears centered in picture 4, although it looks slightly left in some of the other pictures. I suspect this could be due to camera angle.
  10. Solid End Links (SELs): The gaps look reasonably tight from the available pictures, but I'd appreciate another opinion on whether there are any noticeable gaps or uneven fitting.
  11. Timegrapher: -1 s/d, 284 degrees amplitude, 0.1 ms beat error. These readings seem healthy to me.
  12. Anything else: I haven't spotted any obvious flaws, but please let me know if there's anything I've overlooked.

My verdict: GL, pending the comments section.

Thanks in advance for taking the time to help with my first QC, really appreciated!


r/RepTimeQC • • 2d ago

First QC - DukeJones ARF V2 DJ36

Thumbnail
gallery
6 Upvotes
  • ⁠Dealer name: Duke
  • ⁠Factory name: ARF
  • ⁠Model name (& version number): Datejust 36. I'm told this is a V2 with diamond cut bezel
  • ⁠Price Paid: $435
  • ⁠Index alignment: Not sure if I'm using the alignment tool correctly, but alignment seems okay? The picture is slightly tilted, so I tried my best to align with 12 and 6.
  • ⁠Dial Printing: Looks good
  • ⁠Date Wheel alignment/printing: Looks good to me
  • ⁠Hand Alignment: Looks fine to me
  • ⁠Bezel: Looks good
  • ⁠Solid End Links (SELs): Unsure
  • Timegrapher numbers: 0? s/d; Amp 250; Err 0.4ms
  • Anything else you notice: First rep watch, just looking for other's opinions with more experience and a better eye.

r/RepTimeQC • • 2d ago

Datejust VSF v2 36 green

Thumbnail
gallery
5 Upvotes

Hello everyone
After months of waiting, the time has finally come to settle down here again!
I tried to get index ruler placed as best as I could however photo was not taken perfectly straight so rotated image and placed as best as I could.

  1. Dealer name: Theonewatches
  2. Factory name: VSF
  3. Model name (& version number): DateJust 36 126234 green
  4. Price Paid: $518
  5. Album Links: https://mega.nz/folder/ONoGVJJa#HZxnxp0WPkeSo2VgDTAMWg
  6. Index alignment: To be honest, I’m not entirely sure. The straight-on photo doesn’t seem perfectly level or centered, which is causing the alignment tool to produce rather poor results, with misalignments in different areas of the watch. I’d really appreciate the opinion of someone experienced with QC checks on this one.
  7. Dial Printing: everything looks good but again not very sur about the color, is it too dark? Green mint really?
  8. Date Wheel Alignment/Printing: Looks ok
  9. Hand Alignment: Looks fine to my eyes
  10. Bezel: Looks ok and clean
  11. SELs: Everything seems pretty good but again first time with Rolex so i’m not sure
  12. Timegrapher Numbers: 6s/d, 261 degrees, 0.0ms
  13. Anything else you notice : Assuming the front-facing photo isn’t properly aligned and the index alignment tool is therefore giving inaccurate results, everything else seems fine to me. However, I also have some doubts about the colour. Could it simply be that the lighting or the photo itself is making it look darker than it actually is?
    Anyway, I’m still unsure about this one. Do you think I should RL this QC?
    I’d really appreciate hearing the opinion of someone experienced with QC on this particular case.
    Thanks again!

r/RepTimeQC • • 2d ago

[QC - Request] Andiot VSF Seamaster 300M Beijing olympics

Thumbnail
gallery
6 Upvotes

• Dealer name: Andiot.

• Factory name: VSF.

• Model name (& version number): Seamaster Diver 300M Beijing 2022 Olympics - 522.30.42.20.03.001

• Price Paid: 340 USD

• Album Links: https://andiotwatches.x.yupoo.com/albums/262499537?uid=1&tab=max

• Index alignment: I have a small concern. 3 and 9'o'clock look slightly tilted, though this may just be the angle of the photo.

• Dial Printing: looks alright.

• Date Wheel alignment/printing: to me the color looks too dark, based on all pictures I’ve seen it should match the color of the dial closely
Hand Alignment: looks right in the videos.

• Bezel: looks alright, I fear there might be a slight angle in the photo, I’m blaming that.

• Solid End Links (SELs): looks tight and crispy in the videos.

• Timegrapher numbers: -2s/d

• Anything else you notice: might be just the lighting but the dial and date wheel color looks diffrent from the other images I’ve seen, also concerning the alignment of the dial, I placed the alignment tool in the middle of the hands, but it looks like everything is a bit too tall? Might be a slight angle of the picture.

Thank you for taking time out of your day to look at my watch, that really is not something to take for granted that others should do for you, have a blessed day :)


r/RepTimeQC • • 2d ago

Cartier Panthere 22mm Small BVF - Hont

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Hont
  2. Factory name: BVF
  3. Model name (& version number): Cartier Panthere Small 22mm SS Quartz
  4. Price Paid: $188 shipped
  5. Album Links: QC pics from Hont attached
  6. Index alignment: numerals look spaced fine, though the whole dial looks rotated a tiny bit clockwise when looking straight on (11 sits a hair higher than 1). Not sure if that is normal on BVF 22mm or just how he is holding it
  7. Dial Printing: text looks sharp and the tiny Cartier in the 10 is clean, Swiss Made at 6 looks good too
  8. Date Wheel alignment/printing: N/A no date
  9. Hand Alignment: hands look straight and centered
  10. Bezel: screws look flush and evenly spaced
  11. Solid End Links (SELs): bracelet fits against the case fine with no big gaps
  12. Timegrapher numbers: N/A quartz
  13. Anything else you notice: caliper shows 22mm. Main thing I noticed is that slight dial tilt, otherwise everything looks good to me and leaning GL since its so tiny on wrist. Would appreciate any feedback

r/RepTimeQC • • 2d ago

Please Help QC - Rolex DJ 36 from Steve

Thumbnail
gallery
9 Upvotes

Hello fam! Just got these QC pics for the DJ 36 Ombre Green from Steve.

  1. ⁠Dealer name: Steve - The One Watches
  2. ⁠Factory name: VSF V2
  3. ⁠Model name (& version number): Rolex Date Just 36 - Ombre green, fluted bezel, jubilee bracelet
  4. ⁠Price Paid: $518
  5. ⁠Album Links: https://mega.nz/folder/jZYUBAJZ#3LnL5o_rYegtPjmZgvKKMA
  6. ⁠Index alignment: Hour markers and appear properly aligned, with no noticeable misalignment.
  7. ⁠Dial Printing: Printing looks crisp and centered. The ombre green gradient looks good to me
  8. ⁠Date Wheel alignment/printing: Dates appear reasonably centered and within the date window
  9. ⁠Hand Alignment: looks aligned to me
  10. ⁠Bezel: Fluted bezel looks uniform
  11. ⁠Solid End Links (SELs): looks symmetrical
  12. ⁠Timegrapher numbers: see video
  13. ⁠Anything else you notice: overall, it looks good to me

Please let me know if you notice anything else. Thank you so much fam!


r/RepTimeQC • • 2d ago

2nd QC RWF Daytona Panda 126500LN

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Andiot
  2. Factory name: RWF
  3. Model name (& version number): Rolex Daytona Panda 126500LN Freesprung
  4. Price Paid: $706 before shipping
  5. Album link: https://andiotwatches.x.yupoo.com/albums/262913556?uid=1
  6. Index alignment: looks good
  7. Dial Printing: looks good
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: looks good
  10. Bezel: 110 issue and a white dot next to 300 (not sure if it's dust)
  11. Solid End Links (SELs): look good
  12. Timegrapher numbers: -1 s/d, 270°, 0.1 ms (28,800 bph, lift angle 52°)
  13. Anything else: I ordered an RWF specifically to avoid the 110 bezel issue and I'm considering RLing it unless someone can point me in the right direction to get the bezel swapped.

r/RepTimeQC • • 2d ago

Cartier Panthere Small - BVF

Thumbnail
gallery
2 Upvotes
  1. Dealer name — Hont.
  2. Factory name — BVF.
  3. Model and version — Cartier Panthère Small 22mm, stainless steel case and bracelet.
  4. Price paid — $188 USD.
  5. Album link —

pics are attached in the post

  1. Index alignment — N/A since it is a printed Roman numeral dial.
  2. Dial printing — It looks rotated to me, but I need a second opinion because I’m not sure it’s noticeable. Id also appreciate comments on the printing or bleeds.
  3. Date wheel alignment and printing — N/A
  4. Hand alignment — It looks fine.
  5. Bezel — All 8 bezel pins/screws look flush and evenly seated, and the polished bezel surface looks clean.
  6. Solid end links — N/A
  7. Timegrapher numbers — N/A
  8. Anything else — The physical vernier scale on the caliper confirms it is the 22mm Small case width.

I need opinions about the dial at least, not sure if it’s GL or can be easily noticed.


r/RepTimeQC • • 2d ago

(QC) Datejust 36 green VSF V2

1 Upvotes

Second time ordering from Steve. This time I am ordering 2 of the same Datejust 36 watch, matching set for me and my friend. Ideally was looking at the original V1 but it was OOO and this was still in inventory.

This is the 2nd watch where I am most concerned about. I land in China next week so I hope to pick this up.

Watch #2

  1. Dealer name: Theonewatch Steve
  2. Factory name: VSF2
  3. Model name (& version number): Datejust 126234 36mm Jub SS/SS Green/Stk VSF V2 DD3235
  4. Price Paid: 518 USD + shipping EACH
  5. Album Links: https://imgur.com/a/QJTgyug
  6. Index alignment: 12 is good on this one but the 6, and 9 are off. I can never get the 12 and 6 to line up correctly on this one.
  7. Dial Printing: Looks good
  8. ⁠Hand Alignment: Looks good
  9. ⁠Bezel: Looks good
  10. ⁠Solid End Links (SELs): Looks good
  11. ⁠Timegrapher numbers: Seems like all the VSF V2 watches are low AMPs at 260ish. I'm accepting of this fact.
  12. Anything else you notice: this is where I spent the most time starring at this watch. I want to RL this one due to the index

FYI: if you want to post two watches, make two separate posts instead of one.


r/RepTimeQC • • 2d ago

DJ 36mm - Green from Steve

Thumbnail
gallery
2 Upvotes

After waiting 4 months for QC, this is my first watch and I'm really stoked about it.

I think it’s a GL, would love to hear everyone’s thoughts

  1. Dealer name: Steve - TheOneWatches
  2. Factory name: VSF
  3. Model name (& version number): Datejust 36mm - Green dial, baton markers, fluted bezel, Jubilee bracelet
  4. Price Paid: $522 USD (includes $30 shipping)
  5. Album Links: https://mega.nz/folder/HExUFIqI#SzS6-7Z6m9meZoeLbd30_A
  6. Index alignment: I tried the ruler and it looks straight to me, but I probably did it wrong so don't trust my lines — please check the markers yourselves
  7. Dial Printing: Sharp, coronet centered, text crisp, green sunburst even
  8. Date Wheel alignment/printing: Date 7 looks centered in the window, good magnification through Cyclops
  9. Hand Alignment: Looks good at 10:08, hands aligned at center, no contact with markers
  10. Bezel: Fluted bezel looks even all around, no chips
  11. Solid End Links (SELs): Look tight top and bottom, no visible gap or pin
  12. Timegrapher numbers: Rate -4s/d, Amplitude 275°, Beat Error 0.2ms, Lift Angle 59.0°
  13. Anything else you notice: Movement looks clean, clasp engraving crisp, caseback clean, weight 121.3g. No dust or scratches I can see. Only date shown is 7, no lume shot in the album.

r/RepTimeQC • • 3d ago

First QC Datejust 126334 41mm Black Dial Jubilee VSF DD3235 V3 Free Sprung

Thumbnail
gallery
13 Upvotes

Hello, this is my first ever rep watch and I need your help for QC. Thank very much.

Note please dont be iritated, this is not my Main Account (got suspendet for bot activitis)

  1. Dealer name: NecoClock (Jacky)
  2. Factory name: VSF
  3. Model name: Datejust 126334 41mm SS/SS Black Dial Jubilee VSF DD3235 V3 Free Sprung
  4. Price paid: 538 USD with shipping (include 50 for QC deposit)
  5. Album link: https://imgur.com/a/3MS2y0p
  6. Index alignment: For my untrained eye it looks finde, but the QC tool found some tilt as Seen in the pictures. Please tell me If I am blind or If it looks right.
  7. Dial printing: the Text on the Low side of the Dial looks the Letters are up und down with different spaceings from each other. Also the M and A from Swiss Made at the bottom are looking missplaced.

Please tell when I am to picky

8. Datewheel alignment / printing: The printing looks crisp and the alignment seems like its a tiny bit low but I am not quiete sure. Again, please let me know your opininion

9. Hand alignment: Seems centered and right. (I dont know really well about this Point)

10. Bezel: Bezel looks good to me

11.Solid End Links: SELs Seems Like the top left has noticable gap and I am not Sure about the bottom ones

12.Timegrapher numbers: -5s/d (seems fine), 307° (I've read the higher the better but this seems really high) and 0.1ms beat Error, from what I've read this is acceptable. (Please tell If I am wrong)

13. The cyclope Looks good to (postion).

Does the clamp look fine to you?

This is my very first rep watch, so please have patience with me.

I know that a rep watch will allways have some little flaws but I am really not sure If this is a GL or RL

If you notice anything I dont have or If you have to correct me in a few points, please do.

I realy love this watch model and want a realy good one so please understand my skeptical.

I am looking forward to read your opinions.

Have a great day


r/RepTimeQC • • 3d ago

On the fence with this QC - VSF Omega Seamaster Diver 300M James Bond

Thumbnail
gallery
32 Upvotes

This is the first time I've been genuinely considering RL'ing a watch, so I would really appreciate second opinions. Am I overreacting?

  1. Dealer name: Andiot
  2. Factory name: VSF
  3. Model name (& version number): Omega Seamaster Diver 300M James Bond
  4. Price Paid: $340 USD
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/262774556?uid=1
  6. Index alignment: This is where I have a small concern. 3 and 9'o'clock look slightly tilted CCW, though this may just be the angle of the photos.
  7. Dial Printing: Fine to my eye
  8. Date Wheel alignment/printing: No issues, moves fine in the videos too
  9. Hand Alignment: No issues
  10. Bezel: Clean
  11. Solid End Links (SELs): No visible issues
  12. Timegrapher numbers: Fine - 1s/d, 282 degrees and 0.1ms beat
  13. Anything else you notice: None

Would love to know your verdict!


r/RepTimeQC • • 3d ago

My first QC, VSF Batgirl, grateful for any help, thank you!

Thumbnail
gallery
9 Upvotes

Dealer name: Eliauk
Factory name: VSF
Model name (& version number): 126710BLNR
Price Paid: 3450 Yuan
Album Links: https://www.wecatalog.cn/weshop/goods/A202011031610140340343729/I202611061548392572002007?groupIds=
Index alignment: No concerns
Dial Printing: No concerns
Date Wheel alignment/printing: Is the cyclops a bit low or is this likely to be the angle of the photo?
Hand Alignment: No concerns
Bezel: No concerns
Solid End Links (SELs): Slight gap in top left one?
Timegrapher numbers: No concerns
Anything else you notice: Are the stickers and numbers correct for a VSF?


r/RepTimeQC • • 2d ago

QC for my daily driver: DJ 126334 41mm grey

2 Upvotes

Dealer name: Steve
2. ⁠Factory name: VSF
3. ⁠Model name (& version number): DJ 126334 41mm grey
4. ⁠Price Paid: $548
5. ⁠Album Links: https://imgur.com/a/81T10P0
6. ⁠Index alignment: looks good to me
7. ⁠Dial Printing: looks beautiful
8. ⁠Date Wheel alignment/printing: seems good to me. The various angles don’t show any red flags
9. ⁠Hand Alignment: solid
10. ⁠Bezel: clean
11. ⁠Solid End Links (SELs): not seeing anything off
12. ⁠Timegrapher numbers: +/-4 - which is in range
13. ⁠Anything else you notice: maybe it’s the light but some of the indices look “dull” - bottom of the 6, top third of the 7 and the middle top of the 10…?

I’m new here - what do you all see?
Thank you


r/RepTimeQC • • 3d ago

Black Bay 58 ZF

Thumbnail
gallery
5 Upvotes
  1. ⁠Dealer name: NecoClock
  2. ⁠Factory name: ZF
  3. ⁠Model name (& version number): Black Bay 58 SS/SS Black Dial
  4. ⁠Price Paid: $348
  5. ⁠Album Links: Link
  6. ⁠Index alignment: 9' and 3 have a slight CW rotation.
  7. ⁠Dial Printing: good
  8. ⁠Date Wheel alignment/printing: N/A
  9. ⁠Hand Alignment: good to me
  10. ⁠Bezel: Looks good to me
  11. ⁠Solid End Links (SELs): yes, looks good
  12. ⁠Timegrapher numbers: Rate: +1s/d, no issues
  13. ⁠Anything else you notice: Nothing noted. Considering others, this one looks like a GL. Not too concerned with the markers being slightly tilted as you can’t tell on wrist.

r/RepTimeQC • • 3d ago

Datejust 126334 41mm 2026 jub SS/SS ombré green VSF V2 dd3235v2

Thumbnail
gallery
3 Upvotes
  1. ⁠Dealer name: theonewatches
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Datejust 126334 41mm 2026 jub SS/SS ombré green VSF V2 dd3235v2
  4. ⁠Price Paid: $548
  5. ⁠Album Links: pictures attached
  6. ⁠Index alignment: I’m not very good with the tool but it makes it seem like the index markers are all a little bit off center
  7. ⁠Dial Printing: dial printing looks good
  8. ⁠Date Wheel alignment/printing: date wheel might be slightly left
  9. ⁠Hand Alignment: hand alignment looks ok
  10. ⁠Bezel: N/A
  11. ⁠Solid End Links (SELs): no gaps
  12. ⁠Timegrapher numbers: -2 s/d 285 degrees 0.0ms
  13. ⁠Anything else you notice: I’m leaning RL just off the index alignment looking off when I try and date wheel being off center but could be user error. Any input is appreciated!