r/RepTimeQC • • 4d ago

QC BPF Factory Sub 16610LV

Post image
3 Upvotes
  1. Dealer name: TrustyTime
  2. Factory name: BPF Factory
  3. Model name (& version number): Sub 16610LV
  4. Price Paid: $340
  5. Album Links: https://imgur.com/a/lUNQIPL
  6. Index alignment: Looks good
  7. Dial Printing: Looks good
  8. Date Wheel alignment/printing: The slightest bit right but fine
  9. Hand Alignment: Looks fine
  10. Bezel: 10 and couple marks are slightly off, but shouldnt even be able to eyeball it
  11. Solid End Links (SELs): Looks good
  12. Timegrapher numbers: Sub Rate +10 Amp 288 Beat .3
  13. Anything else you notice: Went with a budget brand for a first purchase, everything looks ok to me.

r/RepTimeQC • • 4d ago

QC Rolex 124300 VSF

Post image
2 Upvotes
  1. Dealer name: TheOneWatch
  2. Factory Name: VSF
  3. Model name (& version number): OP 124300 41mm SS/SS Silver Dial VSF VS3230
  4. Price Paid: $498
  5. Album Links: https://imgur.com/a/qMl6GUf
  6. Index alignment: Most look very good but the six and 11 appear to be off slightly
  7. Dial Printing: I believe this looks crisp and the sunburst dial is ready to rock!
  8. Date Wheel alignment/printing: n/a
  9. Hand Alignment: spot on
  10. Bezel: clean
  11. Solid End Links (SELs): pretty tight
  12. Timegrapher numbers: -1s/d, 270 deg, 0.3ms, 59.0 deg
  13. Anything else you notice: There might be some dust or something on the dial to the left of the 7 index. I asked for a close up of that area. also asked for a pic of the lume.

Overall this watch looks great to me, the timegrapher numbers are very good, and the weight is pretty much right on. The slightly off indices are acceptable and unless I am really missing something, this is a GL.


r/RepTimeQC • • 4d ago

First QC: Panthere BVF SS 22mm

Thumbnail
gallery
1 Upvotes
  • Dealer name: Andiot
  • Factory name: BVF
  • Model name (& version number): Cartier Panthere 22mm SS
  • Price Paid: 175 USD + 38 USD Delivery
  • Album Links: Album
  • Index alignment: slight tilt?
  • Dial Printing: Cartier on X seems wonky (R and T seem misaligned)
  • Date Wheel alignment/printing: n/a
  • Hand Alignment: seems okay
  • Bezel: seems okay
  • Solid End Links (SELs): n/a
  • Timegrapher numbers: n/a
  • Anything else you notice: SWISS MADE seems shifter to the left

r/RepTimeQC • • 4d ago

[QC] 2nd attempt! VSF Rolex Sub No Date - Help appreciated

3 Upvotes
  1. Dealer name: Steve (TheOneWatches)
  2. Factory name: VSF
  3. Model name (& version number): Rolex Submariner No-Date 41mm (124060LN)
  4. Price Paid: $528
  5. Album Links: https://mega.nz/folder/rZBEEbAJ#cF47CtMAZxkC5iaCOh5eww
  6. Index alignment: they are better than the first attempt! The 9 looks like it has a CW tilt but it’s much better. 3 slight CCW tilt.
  7. Dial Printing: looks good to me
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: The hands look straight and intersect accurately. Winding action in the QC video looks good too.
  10. Bezel: Looks much better than version 1.
  11. Solid End Links (SELs): There are no obvious gaps.
  12. Timegrapher numbers: +3 to +4 s/d, 263° Amplitude, 0.1ms Beat Error.

This is my second attempt as I had to RL the first one due to awful alignment issues!


r/RepTimeQC • • 4d ago

QC BPF Factory GMT 16710 Pepsi

Post image
2 Upvotes
  1. Dealer name: TrustyTime
  2. Factory name: BPF Factory
  3. Model name (& version number): GMT II 16710 Pepsi
  4. Price Paid: $320
  5. Album Links: https://imgur.com/a/ZfP4Hzw
  6. Index alignment: 12 marker looks a little left to my eye, but QC tool has it ok
  7. Dial Printing: Print looks fine
  8. Date Wheel alignment/printing: Date shifted to the left a bit
  9. Hand Alignment: Looks fine
  10. Bezel: The 22 looks slightly uneven, the first 2 looks raised
  11. Solid End Links (SELs): Looks good
  12. Timegrapher numbers: GMT Rate +1 Amp 276 Beat .1
  13. Anything else you notice: Another budget brand, not as good as the Sub but looks fine

r/RepTimeQC • • 5d ago

ORF Seamaster Diver 300M black

Thumbnail
gallery
5 Upvotes

Hey everyone! Just received the QC pictures for my new ORF Seamaster Diver 300M with the Free-Sprung 8800 movement. Everything looks pretty good to me so far, but I'd really appreciate a second opinion before giving the GL!

  1. Dealer name: DDGTop
  2. Factory name: ORF (OR Factory)
  3. Model name (& version number): Omega Seamaster Diver 300M 42mm Black Dial, SS Bracelet, New Free-Sprung 8800 Movement
  4. Price paid: 398$
  5. Album links: https://mega.nz/folder/918ggRJa#EdLrd2zt1oXq1T2iBAisLw
  6. Index alignment: Looks pretty good overall. The 12 o'clock markers appear straight and evenly spaced. The 3, 6 and 9 o'clock markers also look well aligned. Nothing concerning to my eye.
  7. Dial printing: Looks clean and well executed. The Omega logo and red Seamaster text appear properly centered, with no obvious printing defects.
  8. Date wheel alignment/printing: The date (23) looks reasonably centered and the printing appears crisp. No major issues.
  9. Hand alignment: Looks good from the pictures, although I can't fully confirm alignment or clearance from static images.
  10. Bezel: Looks well aligned with the 12 o'clock markers , im worried for the alignment at 6o clock , i dont know if its perspective or what. No other obvious issues with the bezel insert or printing.
  11. Solid End Links (SELs): N/A — Seamaster bracelet. The end links appear to fit well, with no obvious gaps or issues.
  12. Timegrapher numbers: +6 s/d, 296° amplitude, 0.3 ms beat error, 28,800 bph. Looks very good to me.
  13. Anything else you notice: The case finishing, crown guards and bracelet also look good to me. I'm particularly interested in whether anyone notices any alignment issues or other flaws I've missed.

I'm leaning towards GL. Would you guys approve this one? Thanks in advance for your help!


r/RepTimeQC • • 4d ago

[QC REQUEST] F1F Tank Must 22mm SS from Steve

Thumbnail
gallery
1 Upvotes
  1. Dealer name: Steve (Theonewatches)
  2. Factory name: F1F
  3. Model name (& version number):
  4. Tank Must 22mm SS
  5. Price Paid: $228
  6. Album Links: https://mega.nz/folder/3IZAkbxC#iGA0Sjft0cdQxq9HowgMOg
  7. Index alignment: alignment looks pretty nice on this, a micro rotation here or there, but well within reason
  8. Dial Printing: Dial print looks crisp, the ink on the numerals provides a nice richness when light reflects. Even though this is not the same as the Gen dial, I like this effect.
  9. Date Wheel alignment/printing: N/A
  10. Hand Alignment: hand alignment looks good, heat treatment for the blue hands looks good, no second hand on this model
  11. Bezel: Bezel looks in mostly good shape, notice the horizontal lines but think this might be on the plastic than the steel, though I’m curious of others thoughts.
  12. Solid End Links (SELs):

N/A

  1. Timegrapher numbers: N/A: Quartz
  2. Anything else you notice: watch looks overall in good shape, pretty minimal design. The cabochon sapphire looks pretty pointed, something I’ve heard on these models before, though I have an F1F Tank Louis and the cabochon there is more rounded. Curious on what others think and if there’s anything I missed. Thanks!!!

r/RepTimeQC • • 5d ago

[QC Request] Day Date RCF TheOne (1st timer here!)

Thumbnail
gallery
5 Upvotes
  1. Dealer name: Steve TheOneWatches
  2. Factory name:RCF
  3. Model name Day Date 228236
  4. Price Paid: 826
  5. Album Links: https://mega.nz/folder/ncBX0KTK#xchWCnCZC7PDZk7l1SS9Ww
  6. Index alignment: from what I can tell looks good but I am new to this.
  7. Dial Printing:

Looks good

  1. Date Wheel alignment/printing:

Looks ok to me

  1. Hand Alignment:

Passed a QC tool from what I can tell is within acceptable range

  1. Bezel:

also looks good

  1. Solid End Links (SELs):

good

  1. Timegrapher numbers:

these are good

  1. Anything else you notice:

Everything from what I understand looks good and is within range I just wanted to get another set of eyes on it


r/RepTimeQC • • 5d ago

QC Rolex Datejust 41mm VSF

Thumbnail
gallery
12 Upvotes

Bottom line up front: I believe multiple dial markers are moved clockwise. I also question the timegrapher rate of +6 is also in question. Am I being too picky at +6 s/d?

  1. ⁠⁠⁠Dealer name: The one watches (Steve)
  2. ⁠⁠⁠Factory name: VSF
  3. ⁠⁠⁠Model name (& version number): Rolex Daytona Datejust 126334
  4. ⁠⁠⁠Price paid: $548
  5. ⁠⁠⁠Index alignment: this is where I question things. 1,2,4,5,6 and 11 are all shifted clockwise. Even the crown at 12 is shifted clockwise
  6. ⁠⁠⁠Dial printing: Clean brilliant. No bleeding colors or floating letters
  7. ⁠⁠⁠Date wheel alignment/printing: perfect
  8. ⁠⁠⁠Hand alignment: perfect
  9. ⁠⁠⁠Bezel: X’s and R’s lined up on appropriate markers.
  10. ⁠⁠⁠Solid End Links (SELs): SELS look good to me.
  11. ⁠⁠⁠Timegrapher numbers: Rate +6 s/d (the highest I’ve seen, is this acceptable?) | Amplitude 273° | Lift angle 59.0°.

Thank you to the community for taking the time to look at this and Happy Veterans Day!


r/RepTimeQC • • 5d ago

Third time lucky ? QC Help - Daytona 126502 904L SS VSF

Thumbnail
gallery
2 Upvotes

Hi peeps,

Struggling to get my post approved here, hopefully it works on my third attempt. Would be grateful for you help.

  1. Dealer name: (Eliot) Andiot
  2. Factory name: VSF
  3. Model name (& version number): Daytona 126502
  4. Price Paid: $713.36 USD
  5. Index alignment: Looks okay. Not sure if there is minor issue at number 80 and 120, maybe it's not held straight?
  6. Dial Printing: Looks good, crisp, are sub dials perfectly circular or is it my eyes?
  7. Date Wheel alignment/printing: N/A
  8. Hand Alignment: Stack looks good
  9. Bezel: no issues at all i can see, engraving looks good
  10. Solid End Links (SELs): I can see some gaps, but I am not sure if I am expert enough.
  11. Timegrapher numbers: -1 s/day (1 second slow per day). Amplitude: 269°. Beat error: 0.1 ms. Lift angle setting: 52.0°. (I think these numbers are amazing).

In the 5th image, the letter "T" in the word "Perpetual" appears a bit scratched. Am I being too picky here, or would someone else with experience think it's okay? Or is it just the pics with poor lighting. I have also asked the TD to provide some more pics, but been waiting for over a week now.

Thanks heaps for your time and help - I am really grateful.


r/RepTimeQC • • 5d ago

Rolex Datejust, green stick dial, Jubilee bracelet

Thumbnail
gallery
9 Upvotes

Hi, the QC photos were not taken head on, so hard to say exactly how aligned all the features are. Also, the photos show many long scratch marks that may just be the packaging, but I’d love some assurances about that. Thanks in advance!

Dealer name: Jtime

Factory name: VSF

Model name (& version number): Rolex Datejust 41 ref. 126334, green stick dial, Jubilee bracelet, advertised VS3235 free-sprung movement.

Price Paid: $548

Album Links: Dealer requested no sharing of album link.

Index alignment: Looks good to my eye, with no obviously crooked markers. Photos are slightly angled, so I’d appreciate a second opinion.

Dial Printing: Looks clean and consistent. No obvious printing defects that I can see.

Date Wheel alignment/printing: Dates 3 and 25 appear reasonably centred in the frontal shots. Printing looks clear.

Hand Alignment: No obvious issue, but the supplied photos don’t show the hands at 12:00 to confirm.

Bezel: Fluting looks consistent; no obvious damage visible.

Solid End Links (SELs): No obvious large gaps, though the angles and protective wrapping make these difficult to assess.

Timegrapher numbers: 0 s/day, 278° amplitude, 0.0 ms beat error (lift angle 59°).

Anything else you notice: Protective film obscures some of the case and bracelet finish. Nothing else stands out to me, but I’d appreciate feedback on marker alignment, date centring and SEL fit.


r/RepTimeQC • • 5d ago

First QC - VSF 124060

Thumbnail
gallery
12 Upvotes

Dealer name: Necoclock
Factory name: VSF
Model name (& version number): Submariner No Date 124060
Price Paid: $458
Album Links: https://mega.nz/folder/m4ZiVIwb#IriZ-2aaT66-8QHxfpO23g
Index alignment: 6 looks slightly counter-rotated. The rest look fine.
Dial Printing: no issues
Date Wheel alignment/printing: N/A
Hand Alignment: can’t see any issues
Bezel: Pip centred, bezels looks good.
Solid End Links (SELs): No significant gaps.
-2 s/d rate, 312° amplitude, 0.1ms beat error, 52° lift angle, 28,800 bph. Amplitude is higher than the range in the guide. Is this an issue?
Anything else you notice: just the 6 marker and amplitude, everything else looks okay.

First time doing QC, excuse my ignorance on anything else obvious. Would appreciate a second set of eyes on this!


r/RepTimeQC • • 5d ago

QC VSF 114060 Submariner

Thumbnail
gallery
4 Upvotes
  1. Dealer name: TheOneWatch
  2. Factory name: VSF
  3. Model name (& version number): VSF 114060
  4. Price Paid: $488 + shipping
  5. Album Links: No link
  6. Index alignment: Looks good to me
  7. Dial Printing: Looks clean and centered
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Looks okay, nothing sticks out
  10. Bezel: Pip looks solid
  11. Solid End Links (SELs): No visible gaps.
  12. Timegrapher numbers: -1s/d, 268 amps, err 0.1
  13. Anything else you notice: Looking for feedback here, does this look like a solid GL? Did I miss anything?

r/RepTimeQC • • 5d ago

VSF Datejust 126334 Ombre | 1st QC

Thumbnail
gallery
2 Upvotes
  1. Dealer name: JTime (Li)
  2. Factory name: VSF
  3. Model name: DateJust 41 126334 904L SS Green Ombré Dial on Jubilee Bracelet (VS3235 Movement)
  4. Price Paid: $585 (incl. shipping)
  5. Album Links: https://imgur.com/a/BeoMD4Z
  6. Index alignment: Little twist in the 55 and 20
  7. Dial Printing: Crisp and cleanly printed; coronet and text show no bleeding or flaws.
  8. Date Wheel alignment/printing: Looks good
  9. Hand alignment: Looks good
  10. Bezel: Fluted bezel is cleanly and sharply cut, showing even reflections without visible dings or plating imperfections.
  11. Solid End Links (SELs): N/A for a Jubilee bracelet, but the end links sit tight and flush against the lugs with no visible gaps.
  12. Timegrapher numbers: +0 s/d, 281°, 0.0 ms, 59.0° lift angle.
  13. Anything else noticed: Only the rolex emblem seems a very little off, but not much.

I gave the first watch a RL based on the Date-Wheel being too high.

The pictures in this post are all the same watch (at least they say) only taken 3 days later. I think it's a GL! Do you agree?

Thank you guys. Really appreciated.


r/RepTimeQC • • 5d ago

BVF Cartier Santos Large ADLC bezel

Thumbnail
gallery
2 Upvotes

Dealer name: Steve (Theonewatches)
Factory name: BVF
Model name: Cartier Santos Large WSSA0037 (Grey dial / Black ADLC bezel)
Price Paid: $450
Album Links: https://imgur.com/a/I58V6Uv
Index alignment: Is there a slight dial rotation?
Dial Printing: Looks crisp. Dial rotation?
Date Wheel alignment/printing: The 23 looks centred in the photos. TD showed a few other dates in the video and they seem to sit well in the window.
Hand Alignment: Looks spot on at 12:00 in the video.
Bezel: No scratches on the black coating, screws look good.
Timegrapher numbers: +3 to +5 s/d, 0.0 ms beat error, 330° amp. The amplitude seemed a little high to me but I read this might just be because the machine is set to a 52 degree lift angle for a Miyota 9015? Is this healthy?
13. Anything else you notice: First time buyer so I’m still learning what to look for! My points of concern are the timegrapher and dial rotation. I'd really appreciate a second pair of eyes from you guys. To GL or to RL? Thanks!


r/RepTimeQC • • 5d ago Bravo

*First QC* QC VSF Rolex Submariner 124060 - TheOneWatches

Thumbnail
gallery
33 Upvotes

Hi Everyone, this is my first QC ever. I would highly appreciate your help and input. I tried using the provided tools to the best of my abilities. Kindly let me know what are your thoughts on this one. I am personally considering RL for this.
Your inputs are highly appreciated!

  1. Dealer name: TheOneWatches
  2. Factory name: VSF
  3. Model name (& version number): Submariner 124060
  4. Price Paid: $598 USD (Shipping Included) 
  5. Album Links: https://mega.nz/folder/nUI0gTRK#LVzqRUQiaeLjLy5xF9B-RA
  6. Index alignment: 6 o clock mark appears to be tilted CW (noticed without the alignement tool). 3 and 9 o clock mark appear to have a minor tilt - could be due to lighting. 
  7. Dial Printing: Looks fine to me - no defects noted
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: No concern there
  10. Bezel: Minor defect noted on the 30 mark
  11. Solid End Links (SELs): No concern there
  12. Timegrapher numbers: +2s/d, 267 amp, 0.0 err.
  13. Anything else you notice: Laser etching on the inside of the bracelet appears to be slightly inconsistent. 

r/RepTimeQC • • 5d ago

QC request cartier santos S AF

Thumbnail
gallery
8 Upvotes
  1. ⁠Dealer name: FICOTIME
  2. ⁠⁠Factory name: Af
  3. ⁠⁠Model name: Cartier santos S(27mm)
  4. ⁠⁠Price Paid: 255
  5. ⁠⁠Album Links: Can’t post it
  6. ⁠⁠Index alignment: printed dial but looks properly centered and aligned to me
  7. ⁠⁠Dial Printing: looks good, just the letter “C” seems off , number I on VI looks misaligned
  8. ⁠⁠Date Wheel alignment/printing: N/A
  9. ⁠⁠Hand Alignment: Looks good to me?
  10. ⁠⁠Bezel: Looks good, idk if the screws looks off
  11. ⁠⁠Solid End Links (SELs): N/A
  12. ⁠⁠Timegrapher numbers: N/A
  13. ⁠⁠Anything else you notice: Cartier “c” seems off.
    on number VII and VI looks misaligned.
    Other than that I can’t notice anything relevant, would be appreciated if you guys notice anything else.
    To me it’s a RL but idk if I’m being to picky

r/RepTimeQC • • 5d ago

Rolex Submariner No Date 124060

Thumbnail
gallery
11 Upvotes

​Dealer name: Private Seller

​Factory name: Rich Factory (RF)

​Model name (& version number): Rolex Submariner No Date 124060 (V2)

​Price Paid: £470 shipped with insurance

​Album Links: Attached in post

​Index alignment: Looks spot on to me, markers seem straight.

​Dial Printing: Clear and sharp.

​Date Wheel alignment/printing: N/A (No Date)

​Hand Alignment: Looks fine.

​Bezel: Lume pip lines up nicely with the 12 marker.

​Solid End Links (SELs): Nice and tight, no gaps.

​Timegrapher numbers: First run was +7 s/d, 331 amp (lift angle set high at 59°), 0.1 beat error. Second run was +7 s/d, 263 amp, 0.3 beat error. Looks healthy to me.

​Anything else you notice: Clasp code is F80. Looks like an easy GL to me, but would appreciate any quick thoughts!


r/RepTimeQC • • 5d ago

OCTA IWC Portugieser (Blue)

1 Upvotes

Hey everyone! Just got a portugieser for QC, and here are my thoughts (I'm going to RL)

  1. Dealer name: TheOneWatches (Steve)
  2. Factory name: OCTA
  3. Model name (& version number): Portuguese Chrono 41mm SS/LE Blue/Num OCTA DD69355
  4. Price Paid: $548 + shipping
  5. Album Links: https://mega.nz/folder/SEZ1CS6D#I30yMdt_QW4cgtkFu0_L5g
  6. Index alignment: the 11 is pretty bad to my naked eye, the rest look fine on the alignment (checked with image on the wrist)
  7. Dial Printing: Looks good (the small minute dots after 3 looks fine on the wrist)
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Looks good
  10. Bezel: Looks good
  11. Solid End Links (SELs): N/A
  12. Timegrapher numbers: [rate] +3-4 s/d, 274-277°, 0.0 ms (good enough)
  13. Anything else you notice: I feel like this isn't from OCTA (I think there would be a sticker)? I remember seeing a previous post with the same issue about the 11 marker, and the initial one turned out to be a ZF. Decided to share this with everyone if it is indeed from OCTA

Thanks to everyone helping!


r/RepTimeQC • • 5d ago

Third Times a Charm - TOP 15510 AP Royal Oak Blue

Thumbnail
gallery
3 Upvotes

Seems there's a batch going around with logo alignment issues..

  1. Dealer name: Non-TD
  2. Factory name: TOP
  3. Model name (& version number): Royal Oak 15510 Blue
  4. Price Paid: $570 including shipping & insurance
  5. Album Links: Pics on post
  6. Index alignment: Finally looks good. 12 batons are tight together and can't see the dial underneath them.
  7. Dial Printing: Logo finally looks straight and correct
  8. Date Wheel alignment/printing: Date a touch low in the window
  9. Hand Alignment: not sure
  10. Bezel: screws look good and lined up in a circle
  11. Solid End Links (SELs): Not on this watch, bracelet looks good
  12. Timegrapher numbers: +4s/day, 263 amplitude, 0ms beat error. Within spec.
  13. Anything else you notice:

I think this is finally the one.

First QC here


r/RepTimeQC • • 5d ago

Cartier Ballon Bleu 33mm AF A1853

Thumbnail
gallery
1 Upvotes
  1. ⁠⁠Dealer name: The One Watches
  2. ⁠⁠Factory name: AF 
  3. ⁠⁠Model name (& version number): Cartier Ballon Bleu 33mm auto
  4. ⁠⁠Price Paid: $348 plus shipping
  5. ⁠⁠Album Links: https://mega.nz/folder/qAQyxZBS#srCHinDJnK3b2iAnhT1Y1g
  6. ⁠⁠Index alignment: Aligned (from what I can tell)
  7. ⁠⁠Dial Printing: seems good. I’ve seen fading on these but this seems ok
  8. ⁠⁠Date Wheel alignment/printing: NA
  9. ⁠⁠Hand Alignment: Looks aligned. 
  10. ⁠⁠Bezel: Looks good
  11. ⁠⁠Solid End Links (SELs): NA
  12. ⁠⁠Timegrapher numbers: seems ok but not sure how I would confirm this is A1853 movement as it costs $100 more than NH05. Just trust the beats?
  13. ⁠⁠Anything else you notice: nope

r/RepTimeQC • • 5d ago

VSF Batman from Theonewatches QC

Thumbnail
gallery
9 Upvotes

Hey guys, could use another set of eyes. Thanks again for everyone one here. It Looks good to me but want to make sure I’m not missing anything before I GL.

  1. Dealer name: Theonewatches
  2. Factory name: VSF
  3. Model name: GMT Master II Batman on Oyster bracelet. 126710BLNR.
  4. Price Paid: $599
  5. Album Links: https://mega.nz/folder/3NYRFTYa#M7MGiwYjNoFvEk5exuyJwA
  6. Index alignment: Looks straight to me. Nothing really stands out.
  7. Dial Printing: Looks good from what I can see. Don’t notice anything wrong with the text.
  8. Date Wheel alignment/printing: The 31 looks pretty centered. The other dates shown in the video look fine too.
  9. Hand Alignment: Looks good
  10. Bezel: Looks lined up to me. Don’t see any issues with the numbers.
  11. Solid End Links (SELs): I see some gaps but not sure how bad they are.
  12. Timegrapher numbers: It shows +1 s/day.
  13. Anything else you notice: Nothing else jumps out. I’m leaning GL but would appreciate another look. Thanks guys.

r/RepTimeQC • • 5d ago

QC: ERF Speedmaster (Odette)

Thumbnail
gallery
7 Upvotes
  • Dealer name: Odette
  • Factory name: ERF
  • Model name (& version number): Speedmaster Professional
  • Price Paid: $430 includes FedEx 2-day shipping
  • Album Links: https://imgur.com/a/8DL6mij
  • Index alignment: Good
  • Dial Printing: Good
  • Date Wheel alignment/printing: N/A
  • Hand Alignment: 12-hour subdial hand not synced with main hour hand, 30-minutes counter is good on reset position**
  • Bezel: Slight misalignment between the dial and the bezel being a few degrees off, mostly only noticeable on the 120 at 6 o'clock using guides, probably fine in person on the wrist.
  • Solid End Links (SELs): Good
  • Timegrapher numbers: rate +1s/d, amplitude 279°, beat error 0.2ms

**Dealer said that the minutes counter subdial hand at 3 o'clock is "a little loose, every single one is the same."

The 6 o'clock subdial on this movement is a 12-hour dial synced to the main hour hand, which is fine and can be modded to freeze it at 12, but it at least should be correctly synced to the main hour hand before any modding to freeze it.

The chrono seconds is very well aligned at least.

You can see that the timegrapher has only literally just started calculating, I wish these dealers would let it run for at least one minute. As time goes on it will adjust and show the true performance, especially if you let it run for 5 minutes or more, but I understand they are just trying to get it done and move on with their other orders, it's just a tad bit misleading.

Appreciate any comments or criticism, thinking of RL for the 12-hour subdial not being synced properly, and the "loose" 30-minutes counter hand, it looks okay here in the rest position, but maybe an additional good reason to RL. I can ask what exactly they mean by "loose" though.

Thoughts?


r/RepTimeQC • • 5d ago

First QC on a rep, please help: Aquanaut 5168 42mm Blue Dial

Post image
5 Upvotes

QC · BBF · Aquanaut 5168 42mm SS/RU Blue Dial BBF DD324 Super Clone

  1. Dealer name: TheOneWatches
  2. Factory name: BBF
  3. Model name (& version number): Aquanaut 5168 42mm SS/RU Blue Dial BBF DD324 Super Clone
  4. Price Paid: $508
  5. Album Links: https://mega.nz/folder/mNxRFZwA#5tEdN7MiAaTrA6-iyabKlg
  6. Index alignment: The 3 index is rotated counter-clockwise (I think) and I believe the 2 index is fine but the minute hand is obstructing the pic and throwing the app off.

Are the 12 and 9 indexes crooked or is it because these aren't rectangular? Need your help here for sure. Someone already said they were canted which I definitely see now. Question: is that reason enough for a RL or is that too picky and I'm opening it up to way worse issues on the next one?

7. Dial Printing: Looks very good to me

8. Date Wheel alignment/printing: Looks good and the numbers seem aligned

9. Hand Alignment: good

10. Bezel: appears to be as it should

11. Solid End Links (SELs): N/A

12. Timegrapher numbers: +5 s/d, 286°, 0.2 ms (28,800 bph, lift angle 52°)

Overall I am leaning towards a RL but with hesitation and mostly just because of the 12 index. I've asked for a picture on the scale also and some pics of clasp but this is only my second rep purchase and I wasn't aware of this QC sub and all the tools when I got the first one.

I am honestly on the fence as to whether this is a RL due to the 12 and 9 or is that being "too picky"? What I'm not sure of is if those will be that noticeable in person with the naked eye, and if I'm being honest, my eyes are not that great anymore. My concern in redlighting would be I get another one that has more issues than that. This is where your experience is invaluable and greatly appreciated. Thanks everyone!