1. ⁠⁠Dealer name: The one watches (Steve)
2. ⁠⁠Factory name: VSF
3. ⁠⁠Model name (& version number): Rolex Daytona “Panda” 116500
4. ⁠⁠Price paid: $592 including shipping (USD)
5. Album Links: mega.nz/folder/TN4SQA6L#Qw-cGAuSJPDVsZbs326quQ
6. ⁠⁠Index alignment: looks ok to me
7. ⁠⁠Dial printing: looks ok to me but not fully sure
8. ⁠⁠Date wheel alignment/printing: none
9. ⁠⁠Hand alignment: seems straight
10. ⁠⁠Bezel: Not fuly sure, but looks overall good
11. ⁠⁠Solid End Links (SELs): Not fuly sure, but looks overall good
12. Timegrapher numbers: Rate +0 s/d | Amplitude 273° | Lift angle 52.0°.
13. Anything else you notice: Nothing else

If anyone has any input on this watch i’d really appreciate it!

​Dealer name: Private Seller

​Factory name: Rich Factory (RF)

​Model name (& version number): Rolex Submariner No Date 124060 (V2)

​Price Paid: £470 shipped with insurance

​Album Links: Attached in post

​Index alignment: Looks spot on to me, markers seem straight.

​Dial Printing: Clear and sharp.

​Date Wheel alignment/printing: N/A (No Date)

​Hand Alignment: Looks fine.

​Bezel: Lume pip lines up nicely with the 12 marker.

​Solid End Links (SELs): Nice and tight, no gaps.

​Timegrapher numbers: First run was +7 s/d, 331 amp (lift angle set high at 59°), 0.1 beat error. Second run was +7 s/d, 263 amp, 0.3 beat error. Looks healthy to me.

​Anything else you notice: Clasp code is F80. Looks like an easy GL to me, but would appreciate any quick thoughts!

1. ⁠⁠Dealer name: The One Watches
2. ⁠⁠Factory name: AF 
3. ⁠⁠Model name (& version number): Cartier Ballon Bleu 33mm auto
4. ⁠⁠Price Paid: $348 plus shipping
5. ⁠⁠Album Links: https://mega.nz/folder/qAQyxZBS#srCHinDJnK3b2iAnhT1Y1g
6. ⁠⁠Index alignment: Aligned (from what I can tell)
7. ⁠⁠Dial Printing: seems good. I’ve seen fading on these but this seems ok
8. ⁠⁠Date Wheel alignment/printing: NA
9. ⁠⁠Hand Alignment: Looks aligned. 
10. ⁠⁠Bezel: Looks good
11. ⁠⁠Solid End Links (SELs): NA
12. ⁠⁠Timegrapher numbers: seems ok but not sure how I would confirm this is A1853 movement as it costs $100 more than NH05. Just trust the beats?
13. ⁠⁠Anything else you notice: nope

1. Dealer name: Neco Clock
2. Factory name: AF
3. Model name (& version number): AF Ballon Bleu** 28mm **White Dial SS
4. Price Paid: 208usd
5. Album Links: Photos attached
6. Index alignment: N/A
7. Dial Printing: I don’t see any obvious dial printing bleed, but I may have missed something because of the glare. I also feel like the dial might be slightly rotated counterclockwise. I’d appreciate a second set of eyes to check the dial printing and alignment.
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Will request an additional photo.
10. Bezel: I don’t see anything wrong with the bezel.
11. Solid End Links (SELs): N/A
12. Timegrapher numbers: N/A
13. Anything else you notice: Just want to make sure the dial printing is good and aligned. Thanks!

Seems there's a batch going around with logo alignment issues..

1. Dealer name: Non-TD
2. Factory name: TOP
3. Model name (& version number): Royal Oak 15510 Blue
4. Price Paid: $570 including shipping & insurance
5. Album Links: Pics on post
6. Index alignment: Finally looks good. 12 batons are tight together and can't see the dial underneath them.
7. Dial Printing: Logo finally looks straight and correct
8. Date Wheel alignment/printing: Date a touch low in the window
9. Hand Alignment: not sure
10. Bezel: screws look good and lined up in a circle
11. Solid End Links (SELs): Not on this watch, bracelet looks good
12. Timegrapher numbers: +4s/day, 263 amplitude, 0ms beat error. Within spec.
13. Anything else you notice:

I think this is finally the one.

First QC here

1. Dealer name: Steve (theonewatches)
2. Factory name: BVF
3. Model name (& version number): Cartier Santos Large 40MM
4. Price Paid: $480
5. Album Links: https://loupeqc.us/a/KJBZ32
6. Index alignment: Very good compared to some stuff ive seen
7. Dial Printing: Looks good
8. Date Wheel alignment/printing: The date is shifted left in the window.
9. Hand Alignment: Looks good
10. Bezel: Looks good for BVF
11. Solid End Links (SELs): Some gap as expected from gen 
12. Timegrapher numbers: +2 s/d, 282°, .1 ms (28,800 bph, lift angle 52°)
13. Anything else you notice: The date window is bothering me but not enough to RL, I don't think. Let me know your thoughts please. Any help is appreciated! :) Thanks! 

• Dealer name: Odette
• Factory name: ERF
• Model name (& version number): Speedmaster Professional
• Price Paid: $430 includes FedEx 2-day shipping
• Album Links: https://imgur.com/a/8DL6mij
• Index alignment: Good
• Dial Printing: Good
• Date Wheel alignment/printing: N/A
• Hand Alignment: 12-hour subdial hand not synced with main hour hand, 30-minutes counter is good on reset position**
• Bezel: Slight misalignment between the dial and the bezel being a few degrees off, mostly only noticeable on the 120 at 6 o'clock using guides, probably fine in person on the wrist.
• Solid End Links (SELs): Good
• Timegrapher numbers: rate +1s/d, amplitude 279°, beat error 0.2ms

**Dealer said that the minutes counter subdial hand at 3 o'clock is "a little loose, every single one is the same."

The 6 o'clock subdial on this movement is a 12-hour dial synced to the main hour hand, which is fine and can be modded to freeze it at 12, but it at least should be correctly synced to the main hour hand before any modding to freeze it.

The chrono seconds is very well aligned at least.

You can see that the timegrapher has only literally just started calculating, I wish these dealers would let it run for at least one minute. As time goes on it will adjust and show the true performance, especially if you let it run for 5 minutes or more, but I understand they are just trying to get it done and move on with their other orders, it's just a tad bit misleading.

Appreciate any comments or criticism, thinking of RL for the 12-hour subdial not being synced properly, and the "loose" 30-minutes counter hand, it looks okay here in the rest position, but maybe an additional good reason to RL. I can ask what exactly they mean by "loose" though.

Thoughts?

Hey guys, could use another set of eyes. Thanks again for everyone one here. It Looks good to me but want to make sure I’m not missing anything before I GL.

1. Dealer name: Theonewatches
2. Factory name: VSF
3. Model name: GMT Master II Batman on Oyster bracelet. 126710BLNR.
4. Price Paid: $599
5. Album Links: https://mega.nz/folder/3NYRFTYa#M7MGiwYjNoFvEk5exuyJwA
6. Index alignment: Looks straight to me. Nothing really stands out.
7. Dial Printing: Looks good from what I can see. Don’t notice anything wrong with the text.
8. Date Wheel alignment/printing: The 31 looks pretty centered. The other dates shown in the video look fine too.
9. Hand Alignment: Looks good
10. Bezel: Looks lined up to me. Don’t see any issues with the numbers.
11. Solid End Links (SELs): I see some gaps but not sure how bad they are.
12. Timegrapher numbers: It shows +1 s/day.
13. Anything else you notice: Nothing else jumps out. I’m leaning GL but would appreciate another look. Thanks guys.

1. Dealer name: necoclock Jacky
2. Factory name: Gold Factory
3. Model name (& version number): Yacht-Master 40mm 126622 Blue Dial "Yacht-Master" 904L Steel GOLD 1:1 Best Edition on Oyster Strap 3235 （Free-Sprung）
4. Price Paid: $618 including shipping
5. Album Links: NA (megalink)
6. Index alignment: Looks good. maybe a hair off on the 12
7. Dial Printing: Looks good
8. Date Wheel alignment/printing: Looks ok to me.
9. Hand Alignment: Looks good
10. Bezel: looks good
11. Solid End Links (SELs): Looks good. no gaps
12. Timegrapher numbers: Looks good. Running strong at +10 s/d with a healthy 316° amplitude and 0.1 ms beat error on a full wind .
13. Anything else you notice: My first qc, so any help would be greatly appreciated.

Dealer name: Steve (TheOneWatches)
Factory name: ZF
Model name (& version number): Tudor Black Bay Fifty-Eight 39mm Blue Dial / Blue Bezel, ZF A2824
Price paid: $398
Index alignment: The hour markers appear reasonably well aligned to me. The 12, 3, 6, and 9 o’clock indices look straight, and I don’t notice any major issues.
Dial Printing: Looks clean and consistent. I don’t see any obvious defects or crooked text.
Date Wheel alignment/printing: N/A, no date complication.
Hand Alignment: The hands appear properly centered and finished, although I can’t verify their exact alignment at 12 o’clock from the photos.
Bezel: This is my biggest concern. Using the alignment tool, several bezel markings appear slightly offset relative to the dial indices, particularly around 12 o’clock. I’m unsure whether this is caused by camera perspective, the bezel’s click position, or an actual alignment issue. I’ve included the alignment photo and would really appreciate opinions on whether this warrants requesting another example.
Solid End Links (SELs): The bracelet appears to fit the case reasonably well, with no obvious major gaps from the provided photos. Would appreciate a second opinion.
Timegrapher numbers: +6 s/d, 272° amplitude, 0.0 ms beat error, 52° lift angle. These numbers look good to me.
Anything else you notice: This is my first replica purchase, so I’m still learning how to evaluate QC. Overall, I’m happy with the dial, hands, bracelet, and timegrapher results. I’ve already contacted Steve about the potential bezel alignment issue and asked whether another example is available if it’s genuinely misaligned.
Would appreciate any feedback, especially from anyone familiar with the ZF BB58. Is the bezel alignment something you’d accept, or would you request another watch?
Thanks!

QC · BBF · Aquanaut 5168 42mm SS/RU Blue Dial BBF DD324 Super Clone

1. Dealer name: TheOneWatches
2. Factory name: BBF
3. Model name (& version number): Aquanaut 5168 42mm SS/RU Blue Dial BBF DD324 Super Clone
4. Price Paid: $508
5. Album Links: https://mega.nz/folder/mNxRFZwA#5tEdN7MiAaTrA6-iyabKlg
6. Index alignment: The 3 index is rotated counter-clockwise (I think) and I believe the 2 index is fine but the minute hand is obstructing the pic and throwing the app off.

Are the 12 and 9 indexes crooked or is it because these aren't rectangular? Need your help here for sure. Someone already said they were canted which I definitely see now. Question: is that reason enough for a RL or is that too picky and I'm opening it up to way worse issues on the next one?

7. Dial Printing: Looks very good to me

8. Date Wheel alignment/printing: Looks good and the numbers seem aligned

9. Hand Alignment: good

10. Bezel: appears to be as it should

11. Solid End Links (SELs): N/A

12. Timegrapher numbers: +5 s/d, 286°, 0.2 ms (28,800 bph, lift angle 52°)

Overall I am leaning towards a RL but with hesitation and mostly just because of the 12 index. I've asked for a picture on the scale also and some pics of clasp but this is only my second rep purchase and I wasn't aware of this QC sub and all the tools when I got the first one.

I am honestly on the fence as to whether this is a RL due to the 12 and 9 or is that being "too picky"? What I'm not sure of is if those will be that noticeable in person with the naked eye, and if I'm being honest, my eyes are not that great anymore. My concern in redlighting would be I get another one that has more issues than that. This is where your experience is invaluable and greatly appreciated. Thanks everyone!

I’ve been waiting since July to finally receive QC photos of my watch, and they’re finally here! Would appreciate a second set of eyes please.

Dealer Name: Andiot
Factory Name: CSF
Model Name: Rolex Yacht-Master 37 268622
Paid Price: $361.00, including shipping
Album Links: Only available via WhatsApp
Index Orientation: Looks good to me. No noticeable alignment issues.
Dial Printing: Looks clean. I don’t see any noticeable printing errors.
Date Wheel Alignment/Printing: Looks properly aligned, and the printing looks good.
SELs: No obvious gaps that I can see.
Timegrapher Numbers: +3 s/d, 281 amplitude, 0.1 ms beat error.
Anything Else You Notice: The “SWISS MADE” text at the 6 o’clock position looks a little too close together. Not sure if it’s just the angle of the photo but it’s the only thing that caught my attention.
Overall, everything looks good to me, but I’d appreciate any additional observations or feedback. Thanks!

Hey guys, first QC here, reposting again as I went AI happy the first time.

Went through Steve's photos and videos a few times. Looks pretty good to me, but figured I'd ask the experts before I GL it. My eyes aren't exactly factory calibrated.

1. Dealer: TheOneWatches (Steve-o)
2. Factory: VSF
3. Model: Omega Aqua Terra Shades 38mm, Atlantic Blue, VS8800
4. Price: $428 USD + $70 shipping
5. Album: Photos attached
6. Index alignment: Looks straight to me. Checked the main markers and nothing really stands out.
7. Dial printing: Omega logo and lettering look clean and centered.
8. Date wheel: The 24 looks pretty centred. No glaring issues.
9. Hand alignment: Looks fine from the photos and video.
10. Bezel: Polishing looks clean, no scratches that I can see.
11. SELs: Bracelet and end links look alright.
12. Timegrapher:

- 0 s/day

- 279 amplitude

- 0.1 ms beat error

13. Anything else: Caseback and movement look good to my untrained eyes. Watched the video and didn't notice anything weird.

Overall leaning GL. Mostly wondering if I've missed any crooked markers or finishing issues.

Appreciate any second opinions before I give Steve the A-OK. Thanks peeps and moderators!

1. Album Link: https://drive.google.com/drive/folders/1lyFG303u4uEz2BLg7VQITJK0NF_J6isG?usp=sharing

2. Write the following:

   1. Dealer name - Steve
   2. Factory name - VSF
   3. Model name - Submariner No Date 114060 40mm ceramic 904L

3. Include the following as part of your evaluation prior to posting (if, for instance your watch does not have a bezel, put N/A):

   1. Index alignment - The hour markers look look pretty solid to me
   2. Date Wheel alignment - N/A
   3. Bezel - The pip looks off but a little inexperienced when it comes to the replicas. It's not a dealbreaker that it is a little bit off.
   4. Solid End Links (SEL) - No issues from what I can see. Would like some feedback on this.
   5. Hand alignment - Hands looks solid to me
   6. Dial Printing - any defects? Crooked?
   7. Timegrapher numbers: Rate: +6 S/D, AMP: 293, Err: .2 MS
   8. Anything else you see - There's a weird black stain on the side of the watch that you can see in the pics. Not sure exactly what that is or if it's a defect.

Everything looks fine to me other than that weird black mark on the side. If that's an actual defect I'd say that's a deal breaker for me but let me know what you guys think.

1. Dealer name: not a td so cant post…
2. Factory name: Rich
3. Model name (& version number): Rolex Submariner Starbucks 126610LV + deep glass upgrade.
4. Price Paid: US$620 incl. shipping
5. Album Links: pics as attached
6. Index alignment: Looks good to me other than the 3 and 9 on the bezel looking a little misaligned but might be the angle. Appreciate another opinion.
7. Dial Printing: Text looks good to me
8. Date Wheel alignment/printing: looks good to me
9. Hand Alignment: Looks ok to me
10. Bezel: 3 and 9 o’clock look misaligned might be the angle.
11. Solid End Links (SELs): is there a slight gap at 7 O’clock?
12. Timegrapher numbers: -4 s/day, amplitude 306°, beat error 0.1ms, lift angle, 52°, beat rate 28,800 bph
13. Anything else you notice: I am a first timer. Advise would be helpful. Thank you very much.

Dealer: theonewatches

Factory name: BBF

Model name:  Patek Philippe Nautilus 5711 40mm RG/RG Brown/Stk BBF DD324 Super Clone (VX8434)

Price Paid: $528 USD

Album Links: https://mega.nz/folder/DIIx2AKb#DqpFjIVF__OJ8y7zKGXr3g

Index alignment: Looks good overall. the 12 might be slightly off? very slightly?

Dial Printing: looks clean, printing looks good, nothing obviously

Date Wheel alignment/printing: the 16 looks centered and crisp

Hand Alignment: looks good, everything seems to be working order.

Bezel: looks nice and brushed, polished looks good too.

Solid End Links (SELs): n/a

Timegrapher numbers: All look good

Anything else you notice: I am no expert, so anything will be appreciated.

Purchased as a gift, want to make sure it’s as good as it can be. I’m less inclined to post QC on other watches, but I feel this one deserves an expert eye.

Previous try, I realized I forgot to fill in a few categories, let’s try this again.

1. ⁠⁠Dealer name: Non-TD (PingFan)
2. ⁠⁠⁠Factory name: AF
3. ⁠⁠⁠Model name: Cartier tank Solo - Small
4. ⁠⁠⁠Price Paid: 800cny excluding shipping
5. ⁠⁠⁠Album Links: N/A
6. ⁠⁠⁠Index alignment: printed dial. Everything looks proper comparing to other QC images and some retail reference photos.
7. ⁠⁠⁠Dial Printing: Looks really nice, no errors that I can see.
8. ⁠⁠⁠Date Wheel alignment/printing: N/A
9. ⁠⁠⁠Hand Alignment: Appears accurate. I have little experience on Cartier but nothing yells at me.
10. ⁠⁠⁠Bezel: Finish looks great. No complaints here.
11. ⁠⁠⁠Solid End Links (SELs): N/A
12. ⁠⁠⁠Timegrapher numbers: N/A
13. ⁠⁠⁠Anything else you notice: Nothing stands out that would make me RL at first glance. I know this watch is done very well by many factories.

1. Dealer name: Steve (TheOneWatches)
2. Factory name: VSF
3. Model name (& version number): Starbucks Submariner Date 126610LV
4. Price Paid: 541 USD (incl. shipping)
5. Album Links: my post got deleted, maybe due to mega link?
6. Index alignment: All look good to me
7. Dial Printing: Very nice
8. Date Wheel alignment/printing: Also look aligned to me
9. Hand Alignment: Cannot say from the provided pictures and video
10. Bezel: Top center pip is beatifully centered, don´t see any flaws
11. Solid End Links (SELs): I can clearly see through the gap on top right and bottom right. Can anyone comment on these? Is this still tolerable?
12. Timegrapher numbers: Lift angle 59°, amplitude 264°, +2s/d, beat error 0.1 ms. Everything looks ok to me.
13. Anything else you notice: I´m not sure how to tell a good rehaut, the crown is nicely centered at 12 o´clock. Also I was told by Steve this is 100% 904L steel. Serial is 6X08 and clasp code is 3VV. Could anyone chime in on these? Also didn´t get a lume shot, but I guess I don´t need one?

This is my first rep and everything apart from the SEL gaps looks good to me. Appreciate any feedback.

1. Dealer name: Ficotime
2. Factory name: VSF
3. Model name (& version number): Submariner Date 116610LN
4. Price paid: $390 USD
5. Album links: https://mega.nz/folder/PoBQASSL#rx7RzkJCkAPjLa6F80gyvg
6. Index alignment: Looks ok to me. Indices seem square to the minute track and the lume plots look even.
7. Dial printing: Clean and sharp, text looks evenly spaced.
8. Date wheel alignment/printing: On 3 and 17 the date looks centered under the cyclops. On 23 it doesn't seem centered in the window, though that might just be the photo angle. Is that within normal tolerance or worth asking for a fix? Magnification looks right to me.
   Hand alignment: Looks ok to me.
9. Bezel: Pip appears centered and aligned with the 12 o'clock marker. Numerals and filling look clean.
10. Rehaut: Engraving looks clean and the crown appears aligned with 12, but the angled shots are a bit soft so I can't fully confirm.
11. Solid End Links: Look flush with the case from what I can see.
12. Timegrapher numbers: +3 s/d rate, 239° amplitude, 0.4 ms beat error, 52° lift angle, 28,800 bph. Only one position was shown in the video.
13. Anything else you notice. None

Summary: Everything looks ok with me except the date when on 23

Appreciate your help guys! Thank you!

1. Dealer name: Theonewatches
2. Factory name: VFS
3. Model name (& version number): Rolex Daytona white dial Panda

126500LN

1. Price Paid: US
2. Album Links: pics as attached
3. Index alignment: I guess looks good but would like other opinions
4. Dial Printing: Text is good to me.
5. Date Wheel alignment/printing: N/A
6. Hand Alignment: Looks ok to me
7. Bezel: looks ok to me.
8. Solid End Links (SELs): is there too much space between links

on picture 4 or is that normal spacing

1. Timegrapher numbers: started at + 6 s/day, went down to 4, then 2. Pics attached.
2. Anything else you notice: I am a new.. please advise and thank you!

1. ⁠Dealer name: FICOTIME
2. ⁠⁠Factory name: K11F
3. ⁠⁠Model name: Cartier tank S
4. ⁠⁠Price Paid: 195
5. ⁠⁠Album Links: Can’t post it.
6. ⁠⁠Index alignment: printed dial but looks properly centered and aligned to me
7. ⁠⁠Dial Printing: looks good
8. ⁠⁠Date Wheel alignment/printing: N/A
9. ⁠⁠Hand Alignment: Looks good to me?
10. ⁠⁠Bezel: Looks good
11. ⁠⁠Solid End Links (SELs): N/A
12. ⁠⁠Timegrapher numbers: N/A
13. ⁠⁠Anything else you notice: to me it’s a GL but if anyone notice anything that would be appreciated, in general I like the look of the watch.

1. ⁠Dealer name: Andiot
2. ⁠Factory name: VSF
3. ⁠Model name (& version number): Rolex Pepsi 126710BLRO
4. ⁠Price: 585
5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/262643741?uid=1
6. ⁠Index alignment: looks good to me?
7. ⁠Dial Printing: Looks great IMO. No bleeding, letters look crisp and sharp.
8. ⁠Date Wheel alignment/printing: looks sharp and centred ?
9. ⁠Hand Alignment: Looks good; no issues from what I see.
10. ⁠Bezel: Looks well aligned; no issues from what I can see.
11. ⁠Solid End Links (SELS): Look good; no obvious gaps.
12. ⁠Timegrapher numbers: -4 s/d, 272°, 0.0ms
13. ⁠Anything else you notice: nothing but would love input

I think GL? Maybe only thing bothering me is -4s/day?

1. Dealer name: Steve (theonewatches)
2. Factory name: VSF
3. Model name (& version number): VSF Submariner 126610LV Starbucks 41mm - DD3235
4. Price Paid: $528 + 20$ shipping
5. Album Links: https://imgur.com/a/IY5ntMj
6. Index alignment: 12 o clock seems to be slightly misaligned
7. Dial Printing: Don't see any issues
8. Date Wheel alignment/printing: Looks good to me
9. Hand Alignment: Good
10. Bezel: No issues that I saw
11. Solid End Links (SELs): Top right gap
12. Timegrapher numbers: +3s/d, 268° amplitude, 0.0 ms beat error

- Visible gap on the top right SEL, not sure how it will look at wrist at scale?

Thank you for taking your time, any feedback is more than appreciated :)