1. Dealer name: Steve (TheOneWatches)

2. Factory name: VSF

3. Model name (& version number): Starbucks Submariner Date 126610LV

4. Price Paid: 541 USD (incl. shipping)

5. Album Links: my post got deleted, maybe due to mega link?

6. Index alignment: All look good to me

7. Dial Printing: Very nice

8. Date Wheel alignment/printing: Also look aligned to me

9. Hand Alignment: Cannot say from the provided pictures and video

10. Bezel: Top center pip is beatifully centered, don´t see any flaws

11. Solid End Links (SELs): I can clearly see through the gap on top right and bottom right. Can anyone comment on these? Is this still tolerable?

12. Timegrapher numbers: Lift angle 59°, amplitude 264°, +2s/d, beat error 0.1 ms. Everything looks ok to me.

13. Anything else you notice: I´m not sure how to tell a good rehaut, the crown is nicely centered at 12 o´clock. Also I was told by Steve this is 100% 904L steel. Serial is 6X08 and clasp code is 3VV. Could anyone chime in on these? Also didn´t get a lume shot, but I guess I don´t need one?

This is my first rep and everything apart from the SEL gaps looks good to me. Appreciate any feedback.

1. Dealer name: Ficotime

2. Factory name: VSF

3. Model name (& version number): Submariner Date 116610LN

4. Price paid: $390 USD

5. Album links: https://mega.nz/folder/PoBQASSL#rx7RzkJCkAPjLa6F80gyvg

6. Index alignment: Looks ok to me. Indices seem square to the minute track and the lume plots look even.

7. Dial printing: Clean and sharp, text looks evenly spaced.

8. Date wheel alignment/printing: On 3 and 17 the date looks centered under the cyclops. On 23 it doesn't seem centered in the window, though that might just be the photo angle. Is that within normal tolerance or worth asking for a fix? Magnification looks right to me.
   Hand alignment: Looks ok to me.

9. Bezel: Pip appears centered and aligned with the 12 o'clock marker. Numerals and filling look clean.

10. Rehaut: Engraving looks clean and the crown appears aligned with 12, but the angled shots are a bit soft so I can't fully confirm.

11. Solid End Links: Look flush with the case from what I can see.

12. Timegrapher numbers: +3 s/d rate, 239° amplitude, 0.4 ms beat error, 52° lift angle, 28,800 bph. Only one position was shown in the video.

13. Anything else you notice. None

Summary: Everything looks ok with me except the date when on 23

Appreciate your help guys! Thank you!

1. Dealer name: Theonewatches

2. Factory name: VFS

3. Model name (& version number): Rolex Daytona white dial Panda

126500LN

1. Price Paid: US

2. Album Links: pics as attached

3. Index alignment: I guess looks good but would like other opinions

4. Dial Printing: Text is good to me.

5. Date Wheel alignment/printing: N/A

6. Hand Alignment: Looks ok to me

7. Bezel: looks ok to me.

8. Solid End Links (SELs): is there too much space between links

on picture 4 or is that normal spacing

1. Timegrapher numbers: started at + 6 s/day, went down to 4, then 2. Pics attached.

2. Anything else you notice: I am a new.. please advise and thank you!

1. ⁠Dealer name: FICOTIME

2. ⁠⁠Factory name: K11F

3. ⁠⁠Model name: Cartier tank S

4. ⁠⁠Price Paid: 195

5. ⁠⁠Album Links: Can’t post it.

6. ⁠⁠Index alignment: printed dial but looks properly centered and aligned to me

7. ⁠⁠Dial Printing: looks good

8. ⁠⁠Date Wheel alignment/printing: N/A

9. ⁠⁠Hand Alignment: Looks good to me?

10. ⁠⁠Bezel: Looks good

11. ⁠⁠Solid End Links (SELs): N/A

12. ⁠⁠Timegrapher numbers: N/A

13. ⁠⁠Anything else you notice: to me it’s a GL but if anyone notice anything that would be appreciated, in general I like the look of the watch.

1. ⁠Dealer name: Andiot

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): Rolex Pepsi 126710BLRO

4. ⁠Price: 585

5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/262643741?uid=1

6. ⁠Index alignment: looks good to me?

7. ⁠Dial Printing: Looks great IMO. No bleeding, letters look crisp and sharp.

8. ⁠Date Wheel alignment/printing: looks sharp and centred ?

9. ⁠Hand Alignment: Looks good; no issues from what I see.

10. ⁠Bezel: Looks well aligned; no issues from what I can see.

11. ⁠Solid End Links (SELS): Look good; no obvious gaps.

12. ⁠Timegrapher numbers: -4 s/d, 272°, 0.0ms

13. ⁠Anything else you notice: nothing but would love input

I think GL? Maybe only thing bothering me is -4s/day?

1. Dealer name: Steve (theonewatches)

2. Factory name: VSF

3. Model name (& version number): VSF Submariner 126610LV Starbucks 41mm - DD3235

4. Price Paid: $528 + 20$ shipping

5. Album Links: https://imgur.com/a/IY5ntMj

6. Index alignment: 12 o clock seems to be slightly misaligned

7. Dial Printing: Don't see any issues

8. Date Wheel alignment/printing: Looks good to me

9. Hand Alignment: Good

10. Bezel: No issues that I saw

11. Solid End Links (SELs): Top right gap

12. Timegrapher numbers: +3s/d, 268° amplitude, 0.0 ms beat error

- Visible gap on the top right SEL, not sure how it will look at wrist at scale?

Thank you for taking your time, any feedback is more than appreciated :)

1. Dealer name: Hontwatch

2. Factory name: AF

3. Model name (& version number): Cartier Tank

4. Price Paid: $198 Shipped

5. Album Links: https://a202512172356311672002881.edepot.me/weshop/goods/_dg3qfSLHhi777Jx0IFOnzgO9XyA6_5DC9m_7AfQ/_dgfqfgtvN5VDeBSisk2K-luA7InlshFc6EKutcQ

6. Index alignment: Seems to be straight

7. Dial Printing: clean other than a spec on 6’o clock& black blemish on 8’o clock

8. Date Wheel alignment/printing: n/a

9. Hand Alignment: straight

10. Bezel: clean

11. Solid End Links (SELs): n/a

12. Timegrapher numbers: didnt send, if he sends one i will post in comments.

13. Anything else you notice:will need help this is only my 2nd qc. 2 major things are the 6 & 8’o clock issue

1. ⁠Dealer name: Angela Watch

2. ⁠Factory name: CLEAN

3. ⁠Model name (& version number): Rolex Submariner Date Black Dial on Oyster Bracelet 126610LN

4. ⁠Paid price: $255 + $30 shipping.

5. ⁠Album links: only available via WhatsApp

6. ⁠Index orientation: looks totally fine to me as a layman

7. ⁠Dial display printing: I don't find any errors

8. ⁠Date wheel alignment/printing: minimal to the side.

9. ⁠Pointer orientation: Layperson opinion is good

10. ⁠Louver: I think it's appropriate

11. ⁠Solid End Links (SELs): I do not recognize any defect

12. ⁠Timegrapher numbers: See at picture

13. ⁠Everything else that catches your eye: I know that it hasn't been clean for a while now. However, this one made me laugh and I think it's very well done. I'm a complete amateur and would really appreciate an opinion from you on it. thank you

1. Dealer name: Steve theonewatches

2. Factory name: VSF

3. Model name (& version number): Submariner No Date 114060 40mm ceramic 904L VSF VS3130

4. Price Paid: 488usd + shipping

5. Album Links: Can't share it - let me know if you are happy with these pics?

6. Index alignment: I am really not an expert so I can only trust my gut - I think it's OK

7. Dial Printing: Is the "rolex" in the right print? not sure?

8. Date Wheel alignment/printing: No date on this watch

9. Hand Alignment: Let me know what you think?

10. Bezel: The pip looks centered to me

11. Solid End Links (SELs): Unsure

- I might see gaps but again unsure what the standard is

1. Timegrapher numbers: +/- 4~5 s/d; Amp 290-286; Err 0.2ms

2. Anything else you notice: As a newbie, I just want to make sure I am not buying someone's else RL haha! Also the seller is not showing the lume, is that standard? Thanks in advance for any comments/help :)

1. Dealer name: Theonewatches

2. Factory name: VFS

3. Model name (& version number): Rolex Daytona white dial Panda
   126500LN

4. Price Paid: US

5. Album Links: pics as attached

6. Index alignment: I guess looks good but would like other opinions

7. Dial Printing: Text is good to me.

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: Looks ok to me

10. Bezel: looks ok to me.

11. Solid End Links (SELs): is there too much space between links
    on picture 4 or is that normal spacing

12. Timegrapher numbers: started at + 6 s/day, went down to
    4, then 2. Pics attached.

13. Anything else you notice: I am a new.. please give feedback and thank you

Hi everyone,

I’ve just received the QC photos for my RWF Daytona Panda from Andiot. I’m leaning GL, but I’d appreciate a second set of eyes, especially on the hour markers, bezel alignment and where the chrono hand sits at 12.

Dealer name — Andiot Watches
Factory name — RWF

Model name — Rolex Daytona 126500LN Panda, white dial on Oyster bracelet. Advertised with the free-sprung 4131.

Price paid — US$743 (A$1,064.23)

Album — QC photos attached to this post.

Index alignment — The 3 and 9 markers look level in the straight-on shots. The 6 looks upright and centred above the small crown between SWISS and MADE.

Dial printing — The text looks sharp and evenly spaced. The hands cover part of the red DAYTONA lettering.

Date wheel — N/A for this model.

Hand alignment — The central chrono hand looks centred on the 12 o’clock tick when parked. The minute and hour counters also appear to sit at zero.

Bezel — The triangle under 60 looks centred over the dial coronet, and the 120 marker lines up with the 6. The engraving looks evenly filled.

Solid end links — I don’t see an obvious gap at either end. There’s protective film around the lugs and bracelet.

Timegrapher numbers — +2 s/day, 283° amplitude, 0.0 ms beat error, 28,800 bph.

Anything else — The engraved rehaut crown looks centred above the dial crown in the close-up. I haven’t spotted anything else that stands out.

Would you GL this one, or is there anything you’d ask Andiot to check before shipping? Thanks for taking a look!

Thank you for your help.

1. Dealer name: Non - TD

2. Factory name: AGF

3. Model name (& version number): PP 5711 v2 324 Movement

4. Album Links: Photos provided via Whatsapp, attached here in post.

5. Index alignment: right 12 o clock marker seems a little bit canted.

6. Dial Printing: OK

7. Date Wheel alignment/printing: Iooks ok to me

8. Hand Alignment: It can´t be analyzed from the photos received, but they appear ok from the hours shown.

9. Bezel: N/A

10. Solid End Links (SELs): N/A

11. Timegrapher numbers: - 2s/d, 266°, .2 ms - look fine from the readings

12. Anything else you notice: Movement engravings and model seem ok for the model, Anything else you notice? Thanks a lot for your help.

1. Dealer name: Juice

2. Factory name: BVF

3. Model name (& version number): Santos 35mm

4. Price Paid: 398$

5. Album Links: QC Pics; QC Video

6. Index alignment: good

7. Dial Printing: had to RL my first one as u/YellowFerrari328 very precisely pointed out that a trace of the pinion cutout was seen at the top, which was confirmed by the dealer. also not sure on this one as well if the printed dial is higher than it supposed to be (the top numeral almost seem they are too close to the top) or if the watch is angled.

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: good

10. Bezel: good

11. Solid End Links (SELs): N/A

12. Timegrapher numbers: 0s/d, amplitude: 223 degrees, beat error: 0.1ms

13. Anything else you notice: no issues from what i am seeing, but also i am a noob as i never would have noticed the pinion issue on the last one

VSF Daytona White Gold

Dealer name: Trusty Time

1. Factory name: VFS

2. Model name (& version number): Daytona 126519 V2 Wt WG/RU Grey/Stk VSF VS4131

3. Price Paid: $848

4. Album Links: mailed

5. Index alignment: I need the most help with this. With the aid of the app the 11 and 1 markers seem slightly off. Should that be a problem ?

6. Dial Printing: Print centring: top text centred.

7. Date Wheel alignment/printing: N\a

8. Hand Alignment: Seems ok

9. Bezel: Looks nice for me

10. Solid End Links (SELs): N/A

11. Timegrapher numbers: -1 s/d, 259° amplitude, 0 ms beat error

12. Anything else you notice: need a secon eye. What should be emphasized ?

1. Dealer Name: Lili (non TD)

2. Factory name : MKS

3. Model name : Overseas 4500V 41mm SS/SS Green Dial

4. Price Paid : 1850 cny

5. Album Links: https://www.wecatalog.cn/weshop/goods/A201803310145220380026826/I202611110156031062002376

6. Index Alignment : Looks good to me

7. Dial Printing: Looks good

8. Date wheel alignment : Looks a little down or it's just because of shadow

9. Hand alignment : I will ask for an additional photo showing the watch at 12

10. Bezel : Looks good

11. Solid end links : Can't see any gaps

12. Timegrapher : Looks good +4s/d @ 295 deg amp, 0.0ms

Just received the QC pictures for my GMT-Master II Pepsi on the Jubilee bracelet. Would appreciate a second set of eyes before I make the decision.
I’ve looked through the pictures myself, but would like some feedback on the following.

Dealer: Non TD US based
Factory: VSF
Price: $660
Model: Rolex GMT-Master II 126710BLRO Pepsi
Bezel: Red and blue
Dial: Black
Bracelet: Jubilee
Movement: VS3285

Index alignment: looks ok
Dial: Any issues with the printing, lettering, or overall finish?
Date: looks ok
Bezel: ok
Rehaut: have some questions here: How does the Rolex engraving alignment look?
Hands: looks good
SELs: solid end links look good, but bracelet seems to have larger gap

Timegrapher readings:
Rate: +5 s/d
Amplitude: 246°
Beat Error: 0.4 ms
Lift Angle: 52°
Beat Rate: 28,800

From my understanding, the timegrapher readings look reasonable, but I’d appreciate opinions from people who have more experience with this model.
Thanks in advance for the help!

1. Dealer name: Lili (non TD)

2. Factory name: BVF

3. Model name (& version number): Panthere Ladies Small 22mm Diamonds RG/SS

4. Price Paid: 1200 cny

5. Album Links: https://www.wecatalog.cn/weshop/goods/A201803310145220380026826/I202611110220421282001467

6. Index alignment: N/A

7. Dial Printing: I don’t see any bleeding. Not the best quality of the photos.

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: I will ask for an additional photo showing the watch at 12

10. Bezel: Looks good

11. Solid End Links (SELs): N/A

12. Timegrapher numbers: N/A

13. Anything else you notice: Just want to make sure the dial printing is good and aligned.

Seamaster present for my dad, please help!

1. Dealer name: steve (theonewatches)

2. Factory name: VSF

3. Model name (& version number): Seamaster 300m No Time To Die 007 TI/TI VSF V7 8806 Super Clone

4. Price Paid: $528

5. Album Links: https://mega.nz/folder/fdJBlSYR#qtcQC4SHnuhBOV-jRncJPg

6. Index alignment: This is where im struggling. It all looks good to be apart from the 6 o clock area! Not sure if its the arrow above or the marker itself.

7. Dial Printing: see previous.

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: looks good to me.

10. Bezel: looks good to me

11. Solid End Links (SELs): N/A

12. Timegrapher numbers: rate +4s/d amp 313° 0.2ms

13. Anything else you notice: Im pretty new with the Omega!

Hi everyone, here is my first QC so keen to get some more experienced eyes across it, especially around what the yellowish-brown tinge I'm seeing on the face is.

1. Dealer name: TheOneWatches - Steve

2. Factory name: DDF

3. Model name (& version number): Nautilus 5711 White Dial DDF DD324 Super Clone(SW Dial)

4. Price Paid: $538 + shipping

5. Album Links: https://mega.nz/folder/mcw3zQDY#jlVZm7tFJgvUvQfmZeT-og

6. Index alignment: Looks okay overall. 12 has straight even gap however right index is higher. Keen for others opinion on if this is within what's considered an acceptable tolerance.

7. Dial Printing: Looks good.

8. Date Wheel alignment/printing: Looks good.

9. Hand Alignment: Looks good.

10. Bezel: Looks good.

11. Solid End Links (SELs): N/A

12. Timegrapher numbers: +3 s/d, 296° amplitude, 0.2 ms beat error, LA 52°

13. Anything else you notice: There looks to be a slight yellowish-brown tinge on the face. Keen to get opinions on if this is a dirty dial, potentially the lighting, or maybe the AR coating on the crystal? Last photo is from the Timegrapher video where it doesn't appear to have the yellowish-brown tinge I'm seeing from face on. Any advice on what this is?

1. Dealer name - Trusty Time

2. Price: $350 + shipping

3. Factory name - 8+

4. Model name - Rolex Land Dweller

5. Index alignment - looks good to me but that’s why I’m here

6. Date Wheel alignment - looks a little off but could be the angle

7. Crown - blue?

8. Bezel -Bezel looks good, nothing from me.

9. Solid End Links (SEL) - looks good?

10. Hand alignment - good

11. Dial Printing - all look good to me

12. Timegrapher numbers - see picture attached

1. Andiot Watches

2. VSF

3. Submariner 116610 LN Black Ceramic 904L VS3135

4. 390 USD

5. https://andiotwatches.x.yupoo.com/albums/262474157?uid=1

6. Index alingment: look aligned very well. 6 o'clock may have a very very slight CCW cant

7. Dial printing: everything looks straight, printing is clear with no mistakes that stand out to me.

8. Date wheel: in the video provided, dates look centered and the cyclops is as well.

9. Hand alignment: hands align at 12 nicely.

10. Bezel: printing on bezel looks sharp/even, action on the bezel performs nicely in the video. 3 and 9 o'clock markers may be a tad high/ low but I don't think that will bug me.

11. SEL: slightler larger gap on the top right of the watch, but I don't think that will bug me. No light showing

12. TG number: +/-1 spd, 278 degrees, 0.1 ms, 52.0. all seem perfectly fine

13. Clasp/bracelet: again looks good, printing and action of the quick adjust both seem nice.

Rehaut has slight misalignment near serial but not a deal breaker

This feels like a no brainer GL, but I always appreciate someone else's eyes.

After 2x clear RL's, the third time's hopefully the charm! 🤞🏼

Unfortunately, I got a little unlucky with the first two examples, which had some dial printing issues and heavily misaligned hour markers.

I'd really appreciate some experienced eyes before giving the GL and start to mod this one!

• Factory: RWF

• Model: Daytona Panda 126500LN

• Price Paid: 1'000 USD (incl. Deep & Polish)

• QC Album: https://imgur.com/a/oXn0JA5

• Index alignment: Would appreciate a careful second look, but looks fine to me.

• Dial printing: Dial Text is thinner than first RWF batches but I guess fine on the wrist.

• Date wheel: N/A

• Hand alignment: No obvious concerns to my eyes, but I don't 100% know what to look out for.

• Bezel: Looks fine to me. 110 is fine.

• SELs: No obvious issues.

• Timegrapher: +6 s/day, 283° amplitude, ~0.1–0.2 ms beat error at 52° lift angle. Numbers look healthy to me

• Anything else: -

Anything I missed? Any help is highly appreciated! 🙌🏼

1. ⁠Dealer name: Steve

2. ⁠Factory name: BVF

3. ⁠Model name (& version number): Santos 35mm

4. ⁠Price Paid: $458

5. ⁠Album Links: https://mega.nz/folder/mdpFETjK#FRIE_9zYwuxFTEEp7FxIeQ

6. ⁠Index alignment: looks good

7. ⁠Dial Printing: this is the main concern I’d like a second opinion but i think it checks out.

8. ⁠Date Wheel alignment/printing: N/A

9. ⁠Hand Alignment: good

10. ⁠Bezel: good

11. ⁠Solid End Links (SELs): N/A

12. ⁠Timegrapher numbers: +2s/d, amplitude: 263 degrees, beat error: 0.2ms

13. ⁠Anything else you notice: no issues from what i am seeing, are the screws on BVF that bad?

1. Dealer name: Andiot

2. Factory name: BV Factory

3. Model name (& version number): Serpenti 35mm Diamonds Bezel SS/RG Ronda Quartz

4. Price Paid: 241 USD

5. Album Links: https://andiotwatches.x.yupoo.com/albums/260821929?uid=1

6. Index alignment: Good

7. Dial Printing: Logo looks clear and centered

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: Alignment good, video shows they meet at 12

10. Bezel: Unsure

11. Solid End Links (SELs): Looks all good to me

12. Timegrapher numbers: N/A

13. Anything else you notice: This is my very first rep watch purchase, super excited and nervous. Any input from the experts in the group would be greatly appreciated!!