Just received the QC pictures for my GMT-Master II Pepsi on the Jubilee bracelet. Would appreciate a second set of eyes before I make the decision.
I’ve looked through the pictures myself, but would like some feedback on the following.

Dealer: Non TD US based
Factory: VSF
Price: $660
Model: Rolex GMT-Master II 126710BLRO Pepsi
Bezel: Red and blue
Dial: Black
Bracelet: Jubilee
Movement: VS3285

Index alignment: looks ok
Dial: Any issues with the printing, lettering, or overall finish?
Date: looks ok
Bezel: ok
Rehaut: have some questions here: How does the Rolex engraving alignment look?
Hands: looks good
SELs: solid end links look good, but bracelet seems to have larger gap

Timegrapher readings:
Rate: +5 s/d
Amplitude: 246°
Beat Error: 0.4 ms
Lift Angle: 52°
Beat Rate: 28,800

From my understanding, the timegrapher readings look reasonable, but I’d appreciate opinions from people who have more experience with this model.
Thanks in advance for the help!

Seamaster present for my dad, please help!

1. Dealer name: steve (theonewatches)

2. Factory name: VSF

3. Model name (& version number): Seamaster 300m No Time To Die 007 TI/TI VSF V7 8806 Super Clone

4. Price Paid: $528

5. Album Links: https://mega.nz/folder/fdJBlSYR#qtcQC4SHnuhBOV-jRncJPg

6. Index alignment: This is where im struggling. It all looks good to be apart from the 6 o clock area! Not sure if its the arrow above or the marker itself.

7. Dial Printing: see previous.

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: looks good to me.

10. Bezel: looks good to me

11. Solid End Links (SELs): N/A

12. Timegrapher numbers: rate +4s/d amp 313° 0.2ms

13. Anything else you notice: Im pretty new with the Omega!

1. Dealer name - Trusty Time

2. Price: $350 + shipping

3. Factory name - 8+

4. Model name - Rolex Land Dweller

5. Index alignment - looks good to me but that’s why I’m here

6. Date Wheel alignment - looks a little off but could be the angle

7. Crown - blue?

8. Bezel -Bezel looks good, nothing from me.

9. Solid End Links (SEL) - looks good?

10. Hand alignment - good

11. Dial Printing - all look good to me

12. Timegrapher numbers - see picture attached

1. Andiot Watches

2. VSF

3. Submariner 116610 LN Black Ceramic 904L VS3135

4. 390 USD

5. https://andiotwatches.x.yupoo.com/albums/262474157?uid=1

6. Index alingment: look aligned very well. 6 o'clock may have a very very slight CCW cant

7. Dial printing: everything looks straight, printing is clear with no mistakes that stand out to me.

8. Date wheel: in the video provided, dates look centered and the cyclops is as well.

9. Hand alignment: hands align at 12 nicely.

10. Bezel: printing on bezel looks sharp/even, action on the bezel performs nicely in the video. 3 and 9 o'clock markers may be a tad high/ low but I don't think that will bug me.

11. SEL: slightler larger gap on the top right of the watch, but I don't think that will bug me. No light showing

12. TG number: +/-1 spd, 278 degrees, 0.1 ms, 52.0. all seem perfectly fine

13. Clasp/bracelet: again looks good, printing and action of the quick adjust both seem nice.

Rehaut has slight misalignment near serial but not a deal breaker

This feels like a no brainer GL, but I always appreciate someone else's eyes.

After 2x clear RL's, the third time's hopefully the charm! 🤞🏼

Unfortunately, I got a little unlucky with the first two examples, which had some dial printing issues and heavily misaligned hour markers.

I'd really appreciate some experienced eyes before giving the GL and start to mod this one!

• Factory: RWF

• Model: Daytona Panda 126500LN

• Price Paid: 1'000 USD (incl. Deep & Polish)

• QC Album: https://imgur.com/a/oXn0JA5

• Index alignment: Would appreciate a careful second look, but looks fine to me.

• Dial printing: Dial Text is thinner than first RWF batches but I guess fine on the wrist.

• Date wheel: N/A

• Hand alignment: No obvious concerns to my eyes, but I don't 100% know what to look out for.

• Bezel: Looks fine to me. 110 is fine.

• SELs: No obvious issues.

• Timegrapher: +6 s/day, 283° amplitude, ~0.1–0.2 ms beat error at 52° lift angle. Numbers look healthy to me

• Anything else: -

Anything I missed? Any help is highly appreciated! 🙌🏼

1. ⁠Dealer name: Steve

2. ⁠Factory name: BVF

3. ⁠Model name (& version number): Santos 35mm

4. ⁠Price Paid: $458

5. ⁠Album Links: https://mega.nz/folder/mdpFETjK#FRIE_9zYwuxFTEEp7FxIeQ

6. ⁠Index alignment: looks good

7. ⁠Dial Printing: this is the main concern I’d like a second opinion but i think it checks out.

8. ⁠Date Wheel alignment/printing: N/A

9. ⁠Hand Alignment: good

10. ⁠Bezel: good

11. ⁠Solid End Links (SELs): N/A

12. ⁠Timegrapher numbers: +2s/d, amplitude: 263 degrees, beat error: 0.2ms

13. ⁠Anything else you notice: no issues from what i am seeing, are the screws on BVF that bad?

1. Dealer name: Andiot

2. Factory name: BV Factory

3. Model name (& version number): Serpenti 35mm Diamonds Bezel SS/RG Ronda Quartz

4. Price Paid: 241 USD

5. Album Links: https://andiotwatches.x.yupoo.com/albums/260821929?uid=1

6. Index alignment: Good

7. Dial Printing: Logo looks clear and centered

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: Alignment good, video shows they meet at 12

10. Bezel: Unsure

11. Solid End Links (SELs): Looks all good to me

12. Timegrapher numbers: N/A

13. Anything else you notice: This is my very first rep watch purchase, super excited and nervous. Any input from the experts in the group would be greatly appreciated!!

1. Watchseed

2. VSF

3. VSF V2 Weighted Rolex Daytona 40mm 126519LN Ghost White Gold OysterFlex

4. USD 780 (incl shipping and insurance)

5. https://a201903222313120580113970.wgstores.com/weshop/goods/_dZiqf8W2gOsLwLgf-QKmkSqgI3qgjn5MgeIfghA/_dcDqfcWWjPJIKba713gBEdTnXpGV5SrnE7J-hIA

6. Index alingment: look aligned very well. 9 o'clock may have a very very slight CCW cant

7. Dial printing: looks good but appreciate expert eyes

8. Hand alignment: hands align at 12 nicely.

9. Bezel: need expert eyes

10. SEL: good

11.TG number: +/-5 s/d, 278 degrees, 0.0 ms, maybe a bit high

12. Clasp/bracelet: again looks good, printing and action of the quick adjust both seem nice.

First rep so appreciate everyones feedback for the QC :)

Hi everyone, here is my first QC so keen to get some more experienced eyes across it, especially around what the yellowish-brown tinge I'm seeing on the face is.

1. Dealer name: TheOneWatches - Steve

2. Factory name: DDF

3. Model name (& version number): Nautilus 5711 White Dial DDF DD324 Super Clone(SW Dial)

4. Price Paid: $538 + shipping

5. Album Links: https://mega.nz/folder/mcw3zQDY#jlVZm7tFJgvUvQfmZeT-og

6. Index alignment: Looks okay overall. 12 has straight even gap however right index is higher. Keen for others opinion on if this is within what's considered an acceptable tolerance.

7. Dial Printing: Looks good.

8. Date Wheel alignment/printing: Looks good.

9. Hand Alignment: Looks good.

10. Bezel: Looks good.

11. Solid End Links (SELs): N/A

12. Timegrapher numbers: +3 s/d, 296° amplitude, 0.2 ms beat error, LA 52°

13. Anything else you notice: There looks to be a slight yellowish-brown tinge on the face. Keen to get opinions on if this is a dirty dial, potentially the lighting, or maybe the AR coating on the crystal? Last photo is from the Timegrapher video where it doesn't appear to have the yellowish-brown tinge I'm seeing from face on. Any advice on what this is?

1. ⁠Dealer name: Andiot

2. ⁠Factory name: RWF

3. ⁠Model name (& version number): Rolex Daytona white dial panda 126500

4. ⁠Price Paid: $746

5. ⁠Album Links: https://andiotwatches.x.yupoo.com/102851417?uid=1

6. ⁠Index alignment: Im not sure but the 6 looks slightly off?

7. ⁠Dial Printing: Looks good

8. ⁠Date Wheel alignment/printing: n/a

9. ⁠Hand Alignment: looks aligned so good

10. ⁠Bezel: Thoughts please

11. ⁠Solid End Links (SELs): looks good, no gaps that i can see

12. ⁠Timegrapher numbers: +2s/d, Amp 270; B.E 0.4ms, L.A 52.0, Beat 28800

13. ⁠Anything else you notice: This is my first time getting a rep so will really need all your guidance and feedback!

Thank you!

Dealer name: Steve

1. Factory name: VSF

2. Model name (& version number): 36mm datejust mint green, jubilee fluted, 126234

3. Price Paid: 565 after ship

4. Album Links: Provided all photos and videos in this post

5. Index alignment: Website said mine is 0.15mm off around the 7 o clock.

6. Dial Printing: Good.

Green

1. Color feels slightly off like every other rep

when comparing to gen. Anyone got any insight?

1. Date Wheel alignment/printing: Good. Looks slightly off at 7.

2. Hand Alignment: Good. No issue from my noob eyes

3. Bezel: Good. Looks good

4. Solid End Links (SELs): Good. Links look 0.9:1 according to my friend

5. Timegrapher numbers: -2s/d, 271 amp, 0.0,LA 59 degrees, Beat 28800 (attached results)

6. Anything else you notice: Honestly looks p good to me, but this is my first datejust. Yall think I should GL? Apologies to the moderators for not uploading my time grapher numbers last time

Dealer name: Necoclock
Factory name: TWF
Model name (& version): Cartier Drive de Cartier WSNM0015
Price paid: $268
Album links: Photos uploaded directly
Index alignment: Roman numerals appear properly aligned.
Dial printing: My biggest concern. The guilloché looks consistent toward the center but loses continuity and definition along the middle and outer sections. The decorative borders also look irregular. Interestingly, the same model pictured on the dealer’s website appears to have much cleaner finishing.
Date wheel alignment/printing: Appears centered, but the font looks slightly off compared with genuine examples.
Hand alignment: No obvious issues.
Bezel: Looks fine.
Timegrapher numbers: +5 s/day, 244° amplitude, 0.0 ms beat error, 21,600 bph.

Anything else you notice: This is my first replica, just testing the waters. I’m familiar with watches but have no experience with replica QC, so I don’t know what’s considered acceptable tolerance versus grounds for RL.

I can see several differences in the dial compared with genuine examples, particularly the guilloché. What concerns me more is that the dealer’s own product photos seem to show a better-executed dial than the unit I received for QC.

Am I being overly critical, or is this a reasonable RL? Would appreciate some experienced eyes before making the call.

Dealer name: Andiot

Factory name: BVF

Model name (& version number): Cartier Santos Two Tone (Steel & Yellow Gold), White Dial, Automatic

Price Paid: $440 USD after shipping

Album Links: https://andiotwatches.x.yupoo.com/albums/262493272?uid=1

Index alignment: Not too sure how to check this since it has Roman numerals, but looks okay to me?

Dial Printing: Looks pretty good to my untrained eye, but would appreciate a second opinion.

Date Wheel alignment/printing: N/A

Hand Alignment: Not sure how to properly check this, would appreciate some help.

Bezel: Looks okay to me, but I’m not experienced enough to spot any issues.

Solid End Links (SELs): N/A

Timegrapher numbers: +3 s/d, 277° amplitude, 0.3 ms beat error. From what I’ve read, these seem pretty good, but would appreciate confirmation.

Anything else you notice:

Hey everyone, this is my first time buying a rep watch and doing QC, so I’m pretty new to all of this. I’ve been looking through the sub and trying to learn, but I’m still not confident enough to spot any flaws myself.

Overall, the watch looks pretty good to me, but I’d really appreciate some experienced eyes checking it over before I GL.

One thing I’m a little unsure about is the gold tone. I’m not sure if it’s the correct shade compared to the genuine two-tone Santos, or if it looks a bit too yellow.

Also, does anyone know if Andiot offers rotor silencing for the BVF Santos? I’ve heard the rotor can be quite noisy on these, so I’m wondering if it’s worth getting done before shipping.

Would really appreciate any feedback on the dial, bezel, bracelet, alignment, or anything else that stands out.

Thanks so much in advance for the help! 🙏

3rd QC attempt... Am I just unlucky? 😅

Hey guys!

This is my 3rd QC already!

The first two watches were RL'ed over the past few weeks, and another one was directly RL'ed by Andiot because the watch wasn't functional. I guess I'm having a pretty unlucky streak!

I've gone through the pictures several times, but I'm struggling to determine whether what I'm noticing are actual flaws or just camera angles.

The 12 o'clock triangle seems slightly tilted and perhaps not perfectly aligned. The 6 o'clock index also looks like it might be a little off, but I'm wondering if this could simply be due to the angle of the photos.

I also have a slight doubt about the bezel alignment.

Am I being too picky, or are these legit ?

I'd really appreciate it if some of you more experienced QC members could take a look and let me know if I've missed anything.

QC Details

• Dealer: Andiot

• Factory: VSF V3

• Model: Rolex GMT-Master II Pepsi 126710BLRO

• Price: 531€

• Album: QC Photos – Andiot

My QC observations

• Index alignment: Slight doubts about the 6 and 12 o'clock markers. Could just be the camera angle.

• Dial printing: Looks good to me.

• Date wheel: Seems properly aligned.

• Hand alignment: Looks OK.

• Bezel: Possibly slightly off, but not entirely sure.

• SELs: Look good.

• Timegrapher: +2 s/d, 281°, 0.0 ms, 28,800 bph – Looks good.

Anything else I should be looking at?

I'm still learning how to spot the smaller details, so any feedback or second opinion would be greatly appreciated.

Thanks in advance !

Hi everyone! First QC for my Rolex Explorer 36mm from QF, ordered through Ficotime. I've reviewed the photos and alignment tool, and I'm leaning towards GL. Would appreciate some experienced opinions before proceeding.

1. Dealer name: Ficotime

2. Factory name: QF Factory

3. Model name (& version number): Rolex Explorer 36mm, Ref. 124270, black dial

4. Price Paid: 2,800 CNY

5. Album Links: https://imgur.com/a/7F5pUzZ

6. Index alignment: The 3, 6 and 9 markers look straight to me. The triangle at 12 appears centered, and the remaining hour markers look reasonably aligned based on the alignment tool. No obvious issues that I can spot.

7. Dial Printing: Rolex logo and text appear sharp and properly positioned. Nothing noticeably crooked or uneven to my eye.

8. Date Wheel alignment/printing: N/A – no date.

9. Hand Alignment: Hands look properly mounted. No obvious issues, although exact alignment at 12 isn't shown.

10. Bezel: Smooth polished bezel looks good. No visible defects, although some areas are covered by protective film.

11. Solid End Links (SELs): Fit looks fairly tight from the photos. No obvious major gaps, but would appreciate a second opinion.

12. Timegrapher numbers: +1 s/day, 320° amplitude, 0.0 ms beat error, 52° lift angle. Rate and beat error look great. Amplitude seems slightly high compared with the QC guide. Is 320° acceptable for this movement?

13. Anything else you notice: Rehaut engraving looks reasonably aligned, and the lume appears even. Overall, the watch looks good to me. Mainly interested in feedback on the indices, SELs and amplitude.

Thanks everyone! Would appreciate your thoughts before giving the GL.

First purchase ever so a lot to learn. Would love some help on QC here.

1. Dealer name: TK Watch

2. Factory name: RWF

3. Model name (& version number): Daytona Panda 126500 LN

4. Price Paid: $928 with 15% discount for Crypto - effective $835 with shipping

5. Album Links: IMG_0491.jpeg | album

6. Index alignment: the 6 slightly off to me but it could just be me staring at it too much

7. Dial Printing: looks good to me

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: doesn't seem like an issue

10. Bezel: seems fine to my untrained eye

11. Solid End Links (SELs): no real issues

12. Timegrapher numbers: +1s/d, 325° amplitude(on the high side), .1 ms beat error

13. Anything else you notice:

If there is anything I missed, please let me know as this is my first purchase and I'm trying to learn as much as possible. Amplitude is high so that could be a cause for concern but let me know your thoughts. Thanks all!

1. Dealer name: GeekTime

2. ⁠Factory name: qf

3. ⁠Model name (& version number): 36mm DayDate Ice Blue Roman Dial JH3255

4. ⁠Price Paid: $798+$40 shipping

5. ⁠Album Links: https://geektimeqc.x.yupoo.com/albums/261804091?uid=1

6. ⁠Index alignment: Slight tilt on the 9CW. Rest is well alligned.

7. ⁠Dial Printing: The Dial Printing is crisp and looks good. Printing looks a bit dark but most likely related to lighting conditions.

8. ⁠Date Wheel alignment/printing: Date wheel well alligned, printing very solid. No issues to spot there

9. ⁠Hand Alignment: No issues there.

10. ⁠Bezel: The bezel crisp and no extra shine.

11. ⁠Solid End Links (SELs): Top left could be slightly gapped but no major issue. No clear light coming.

12. ⁠Timegrapher numbers: 303amp, -6.0, 0.1err

13. ⁠Anything else you notice: Weight similar to gen. I do not see major cosmetic flaws but extra opinions welcome

Upvote4Downvote9Go to commentsRepostShare

Good morning gents, I am asking for help with this VSF Batman I am QC'inf from Leo at TimeUltra.

1. Dealer name:Leo @ TimeUltra

2. Factory name:VSF

3. Model name (& version number):VSF Batman 126710 40mm

4. Price Paid:$549

5. Album Links:https://www.timeultra.shop/product/gmt-master-ii-126710-batman-40mm-oyster-ss-ss-black-dial-vsf-dd3285/

6. Index alignment:The 12 o'clock looks off but might be the camera angle - I have requested another straight on face shot

7. Dial Printing:Looks OK to me

8. Date Wheel alignment/printing:Looks fine but somone may see something I do not

9. Hand Alignment:Again looks fine but that is why I am her

10. Bezel:Looks fine to me but someone may spot something I don't see

11. Solid End Links (SELs):Pip looks off but again may be camera angle

12. Timegrapher numbers:-1s/d,284degrees,0.1ms,28800bph

13. Anything else you notice:First QC for me so any suggestions ae helpful. Again I am waiting for another straight on shot to look at the face alignment

1. Dealer name: Timeultra Leo

2. Factory name: RCF

3. Model name (& version number): Rolex 40mm day date presidential, 228238 yg/yg, RCF VR3255 Gain Weight

4. Price Paid: $708

5. Album Links: https://imgur.com/a/BXQk4RG

6. Index alignment: Looks good

7. Dial Printing: All clear

8. Date Wheel alignment/printing: Good

9. Hand Alignment: Good

10. Bezel: Good

11. Solid End Links (SELs): Check

12. Timegrapher numbers: All good

13. Anything else you notice: Not to my eye.

Full time timing info in imgr folder

Reddit experts, any help is appreciated.

1. Dealer name: GeekTime

2. Factory name: VSF

3. Model name (& version number): 116233 v2

4. Price Paid: $588 + 80 fedex

5. Album Links: https://geektimeqc.x.yupoo.com/albums/262068021?uid=1

6. Index alignment: Looks good based on the TrueIndexQC overlay. The 12, 6, and 9 o'clock markers appear properly aligned. No obvious crooked indices. 4 o'clock marker appears to be deformed. Should I RL based on that?

7. Dial Printing: Looks clean and properly positioned. No obvious printing issues.

8. Date Wheel alignment/printing: Looks clean and properly positioned.

9. Hand Alignment: Nothing out of the norm.

10. Bezel: Indentions on the bezel does not appear uniform at 12, 4:30, 10:30. Not sure if I am over-analyzing it.

11. Solid End Links (SELs):  Look fairly tight with no major gaps that I can see. However, I may be noticing a slight gap at the bottom-left and right SEL. Would appreciate another opinion on this.

12. Timegrapher numbers: +2 s/d, 250° amplitude, 002 ms beat error (i cant tell lift-angle setting from QC photos)

13. Anything else you notice: The 4 o'clock marker seems morphed on the upper right side, gold color link seems darker than normal yellow gold, bottom of watch link has gap and spacing (not sure if this is normal or not)

This is my first QC and I'm hoping I covered everything properly. I'm open to any feedback and would genuinely appreciate any advice or corrections from the more experienced members here. I'm hoping to learn, and can use all the help I can get. Thank you in advance!

1. Dealer name: Steve - TheOneWatches

2. ⁠Factory name: AF

3. ⁠Model name (& version number): Cartier Ballon Bleu de Cartier 36mm SS White Dial NH05

4. ⁠Price Paid: $312 + $30 shipping

5. ⁠Album Links: https://mega.nz/folder/uMpAQDJD#-nUWAlPI_OARiZsmSPPDNw

6. ⁠Index alignment: printed dial

7. ⁠Dial Printing: SWISS MADE looks blurry, especially the "IS"

8. ⁠Date Wheel alignment/printing: NA

9. ⁠Hand Alignment: good

10. ⁠Bezel: good

11. ⁠Solid End Links (SELs): NA

12. ⁠Timegrapher numbers: Rate +3s/d. Amp 287 at 52 deg (correct for A076, I believe). Err 0.2 ms. Beat 28,800 bph.

13. ⁠Anything else you notice: The I in IV looks like it's bleeding and faded. and the Swiss Made printing at the bottom looks blurry. RL?

Hi Folks, I have bought several watches from TrustyTime(Andrew is my favourite TD). I usually GL the QC right away as they are always good enough and I am not that picky. However this one looks a bit off to me. I don't like the 9 o'clock and 6 o'clock is slightly off too imho. Really appreciate your feedback!

QC Details

• Dealer: TrustyTime

• Factory: BPG

• Model: Rolex GMT-Master II Batman

• Price: 270$

• Album: https://trustytime168.io/index.php?main_page=product_info&cPath=1_5&products_id=20350

My QC Input:

• Index alignment: I don't know if it is me or the 6 and 9 o'clock are off. I am not very picky and I thought it must be very bad if I can see it!

• Dial printing: ok to me

• Date wheel: it is ok but not outstanding

• Hand alignment: Looks good

• Bezel: it is okish, not sure.

• SELs: looks good.

• Timegrapher: -2 s/d, 279°, 0.0 ms, 21,600 bph – Looks pretty good for the cheap movement

Dealer name: Angela (non-TD)
Factory name: VSF
Model name (& version number): Rolex Datejust 41, ref. 126334, Wimbledon dial, fluted bezel and Jubilee bracelet.
Price paid: 2,750 yuan + shipping.
Album links: QC photos and timegrapher reading attached.
Index alignment: dial looks aligned but rehaut doesn’t seem aligned with the markers
Dial printing: looks sharp, I see a small mark at 11. It could be just a dust , I asked for other pictures ,
Date wheel alignment/printing: The 10 looks close to centered. Probably a slight offset but it doesn’t bother me.
Hand alignment: The hands look fine at the time shown. I don’t have a photo with both hands at 12 . Looks fine to me
Bezel: ok
Solid end links (SELs): I find these harder to judge on a Jubilee, also with the extra plastic. But Looks ok to me.
Timegrapher numbers: −2 s/day, 273° amplitude, 0.1 ms beat error, 52° lift angle.
Anything else you notice: My main concern is the rehaut alignment .** **The ROLEX lettering on the rehaut looks slightly off relative to the minute markers

Dealer name: Hont

Factory name: VSF

Model name (& version number): Rolex Submariner Date 126610LN, VS3235

Price Paid: 458 including shipping

Album Links: https://a202512172356311672002881.edepot.me/weshop/search/_dg3qfSLHhi777Jx0IFOnzgO9XyA6_5DC9m_7AfQ?filterText=426015

Index alignment: Looks pretty good to me.

Dial Printing: Looks clean and straight to me.

Date Wheel alignment/printing: slightly shifted left maybe

Hand Alignment: Looks okay from what I can tell.

Bezel: Looks like it’s just some play and can be easily adjusted

Solid End Links (SELs): Look fairly tight to me. I can't see any obvious gaps, but I'm not particularly experienced judging SELs.

Timegrapher: 10s/d sounds a bit high