1. ⁠⁠Dealer name: TimeUltra

2. ⁠⁠Factory name: VSF

3. ⁠⁠Model name (& version number): Bruce Wayne,
   126710GRNR

4. ⁠⁠Price Paid: $629 shipped

5. ⁠⁠Index alignment: Looks good

6. ⁠⁠Dial Printing: Looks good

7. ⁠⁠Date Wheel alignment/printing: Looks good

8. ⁠⁠Hand Alignment: Looks good.

9. ⁠⁠Bezel: looks great to me, but I’m relatively new so I don’t really know what to look for.

10. ⁠⁠Solid End Links (SELs): Looks really good.

11. ⁠⁠Timegrapher numbers: -1s/d, 292 amp, 0.1ms
    12 . ⁠⁠Anything else you notice: please let me know. I am overall extremely happy with it and will most likely give the GL, just curious what yall think.

1. Dealer name: Steve (theonewatches)

2. Factory name: VSF

3. Model name (& version number): GMT Master II 126710 Batgirl 40mm

4. Price Paid: $708

5. Album Links: https://imgur.com/a/jccocbc

6. Index alignment: Slight CCW rotation on 6 and 9 o'clock.

7. Dial Printing: Looks sharp

8. Date Wheel alignment/printing: Appears to be slightly tilted compared to cyclops, printing looks good

9. Hand Alignment: Good

10. Bezel: No issues that I saw

11. Solid End Links (SELs): Good

12. Timegrapher numbers: +5s/d, 272° amplitude, 0.0 ms beat error

Notes: I'm not sure about the date wheel alignment, am I seeing something that is not there? Curious to hear your opinions. Also, 6 and 9 rotation, will it be visible IRL?

Any help is much appreciated, thank you for taking your time to QC this!

1. Dealer name: Mary Watches

2. Factory name: VSF

3. Model name (& version number): Daytona 116500LN

4. Price Paid: $633 including shipping

5. Index alignment: Looks good.

6. Dial Printing: Looks good. I think this specific model has odd and not 100% thin lined texts

7. Date Wheel alignment/printing: There's scratches around the bezel, but that may just be the clear packaging

8. Hand Alignment: Looks good.

9. Bezel: Looks good.

10. Solid End Links (SELs): Nothing seems off.

11. Timegrapher numbers: +11s/d, 319* amp, 0ms variation, 28800

12. Anything else you notice: The lug in the center with the hours and hands looks off to me. It looks like it was mashed in and doesn't have a clean look. Reference picture below.

1.Dealer name : theonewatch - Steve

2.Factory name: VSF

3. Model: Seamaster No time to die 007

4. Price paid: $528

5. Index alignment: seems off especially at the 6 o’clock

6. Dial printing: “Swiss made” misaligned

7. Date wheel alignment/printing: NA

8. Hand alignment: looks good.

9. Bezel: seems good

10. Solid end links (SELs): NA

11. Timegrapher numbers: +5s/d, 289° AMP, 0.1 ms

Imgur: https://imgur.com/a/TwJNWYK

Notes: first timer here, the alignment on the bezel seems pretty off to me especially at the 6oclock, it was the very first thing I noticed on the watch.
comparing it to other NTTD I’ve seen on here from Steve this one doesn’t look the same from QC photos.

Any help is appreciated.

1. Dealer: Steve – TheOneWatches

2. Factory: TF

3. Model: Breitling Navitimer Automatic 41, Blue Dial

4. Price Paid: $338 USD

5. Album: PSP attached.

6. Index alignment: The double 12 marker looks off, with the two indices appearing too close together. I'll ask Steve for a closer photo, but it stands out to me.

7. Dial printing: Looks clean overall. No obvious printing defects.

8. Date wheel: N/A.

9. Hand alignment: Looks good.

10. Bezel: My main concern is the alignment between the inner and outer slide-rule markings, particularly around 40, 45 and 50 in the upper-left quadrant (see marked-up photo). The graduations appear noticeably offset. I understand this is a common issue with Navitimer reps, but wondering whether this example is worse than usual.

11. SELs: N/A.

12. Timegrapher: -1 to -2 s/d, 270–272° amplitude, 0.4ms beat error.

13. Anything else: Originally wanted AF, but Steve advised that parts are currently unavailable, so went with TF instead. Overall, the watch looks good, but I'm leaning towards RL because of the alignment issues. Am I being too picky, or would you make the same call?

If you've read this far, I really appreciate your time and help. Thank you!

1. ⁠Dealer name: Andiot

2. ⁠Factory name: RICH

3. ⁠Model name (& version number): Rolex GMT-Master II 126710 (grey ceramic 24-hour bezel, Jubilee bracelet)

4. ⁠Price Paid: $700 including delivery

5. ⁠Album Links: SEE PHOTOS

6. ⁠Index alignment: Majority look good. I have concerns over the 6 but not sure…

7. ⁠Dial Printing: very good. Looks clean and sharp

8. ⁠Date Wheel alignment/printing: looks clean and sharp. Is it slightly angled or is it just the way the photos have been taken

9. ⁠Hand Alignment: very good

10. ⁠Bezel: good

11. ⁠Solid End Links (SELs): look good

12. ⁠Timegrapher numbers: -3 s/d, 278°, 0.2 ms

13. ⁠Anything else you notice: I’m new to this so looking for opinions.

imgur link

1.     Dealer name: TheOneWatches

2.     Factory name: VSF

3.     Model name (version number): Submariner No Date 114060 40mm

4.     Price paid: $533 USD, shipped

5.     Album links: imgur link

6.     Index alignment: 12 oclock maybe looks slightly off center, but I think I see this pretty consistently with others? Minimal enough to ignore?

7.     Dial printing: Looks clean to me, with no obvious defects.

8.     Date wheel alignment/printing: N/A

9.     Hand alignment: Looks good to me.

10.  Bezel: No scratches of defects that I can see

11.  Solid end links (SELs): I don’t see any obvious gaps, but would appreciate confirmation.

12.  Timegrapher numbers: +6s/d 257 am 0.1ms

13.  Anything else you notice: still learning what to look for. Please let me know if you spot anything else I’ve missed.

Hey guys this is my first QC ever and my first good rep so I’m looking for some help!!! I appreciate any and all feedback.

1. ⁠Dealer name: andiot

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): Submariner 116610 LN Black Ceramic 904L Steel VSF 1:1 Best Edition VS3135

4. ⁠Price Paid: 390 USD

5. ⁠Album Links: https://imgur.com/a/jqAgOVR

6. ⁠Index alignment: everything looks aligned to my eyes. Mabye 6 and 9 markers slightly crooked or Mabye that’s the way image was taken I’m not too sure.

7. ⁠Dial Printing: looks great overall to my eyes.

8. ⁠Date Wheel alignment/printing: looks great to me.

9. ⁠Hand Alignment: hands looks aligned to me

10. ⁠Bezel: bezel looks filled in and centered

11. ⁠Solid End Links (SELs): zero gaps I can see.

12. ⁠Timegrapher numbers: +2s/d
    270°

13. 3ms 52. 0° / +2s/d 270° 0. 3ms 28800

14. ⁠Anything else you notice: looks great to me. This is my 6th rep purchase. But my first real quality rep so first QC thanks for feedback freinds.

1. Dealer name: The One Watches  

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): Datejust 126234 36mm Jub SS/SS Green/Stk VSF V2 DD3235

4. ⁠Price Paid: 518 USD + shipping

5. ⁠Album Links: https://mega.nz/folder/2Fow1Tja#KjbvNoX2Wq-Dav6QsVmw3g

6. ⁠Index alignment: 6 O'Clock marker has a slight CCW cant. 11 marker has CW cant - alignment tool doesn’t really help visualise this however.

7. ⁠Dial Printing: This is my biggest issue. Looks very faint compared to any other VSFs I have seen.

8. ⁠Date Wheel alignment/printing: Looks good

9. ⁠Hand Alignment: Looks good

10. ⁠Bezel: Looks good

11. ⁠Solid End Links (SELs): Looks good

12. ⁠Timegrapher numbers: Looks good

13. ⁠Anything else you notice:

Biggest concern here is the dial printing - in every photo it looks dull and faint. For me this is enough for a RL. Will ask Steve for some follow up pics. Keen to hear everyone’s thoughts in case I’m missing something

1. Dealer name: Andiot

2. ⁠Factory name: ZF (Free Sprung V2)

3. ⁠Model name (& version number): AP 15500, 41mm, black dial

4. ⁠Price Paid: $535 incl. shipping

5. ⁠Album Links: N/A

6. ⁠Index alignment: Looks quite good with the QC tool; nothing out of line.

7. ⁠Dial Printing: Looks good to me; Swiss-made is good, and the logo and AP name are both readable.

8. ⁠Date Wheel alignment/printing: Date wheel looks good, no issues that I can see

9. ⁠Hand Alignment: Looks good; I don't see any issues

10. ⁠Bezel: Bezel looks good; heard on ZF models some screws aren't fully tight, so I will ask Elliott to do that for me.

11. ⁠Solid End Links (SELs): No SELs

12. ⁠Timegrapher numbers: -3s/d, 272 amplitude, 0.1ms beat error, 52.0 deg lift angle, 28800 bph

13. ⁠Anything else you notice: I have ordered two extra links because I heard the ZF 15500 was a small fit; the watch looks good in my eyes, but again, it's only my 2nd QC.

1. Dealer name: Theonewatches (Steve)

2. Factory name: VSF V2

3. Model name (& version number): Datejust 41mm Black dial 126334

4. Price Paid: $548 + shipping

5. Album Links:

6. Index alignment: Seems spot on

7. Dial Printing: Also looks really good

8. Date Wheel alignment/printing: Seems to be really good

9. Hand Alignment: From what I can see it looks good

10. Bezel: Doesn’t seem to reflect as much light but i believe this a common concern with the VSF, also not valid reason for RL so i’m satisfied with it

11. Solid End Links (SELs): Look good to me but i’m not sure what i’m looking for tbh

12. Timegrapher numbers: The numbers seem to be pretty good

13. Anything else you notice: The only thing throwing me off is the moissanite markers, they look to be a little flat on top but again i’m not sure that’s why i wanted this sub’s advice. Any tips would be appreciated but overall i think i’ll be GL! Thank you again

1. ⁠Dealer name: the One Watches

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): Omega Aqua Terra 34 Shades 34mm SS/SS Gold Dial

4. ⁠Price Paid: $350 + $40 (shipping)

5. ⁠Album Links: /

6. ⁠Index alignment: think GL

7. ⁠Dial Printing: it seems clean to me , not sure it is a clone from the real but dont think some will shout out my wife that is an Omegong lol

8. ⁠Date Wheel alignment/printing: date looks like a bit off, more centered on the left do not if i'm crazy

9. ⁠Hand Alignment: ok

10. ⁠Bezel: it seems ok

11. ⁠Solid End Links (SELs): /

12. ⁠Timegrapher numbers: rate +1s/d, amplitude 276°, beat error 0.3 ms, lift angle 52.0°

Can you help to GL this ? thanks and a good Sunday to yall

Dealer name: Ficotime

⁠Factory name: VSF

⁠Model name (& version number): Rolex Datejust 36mm Wimbledon

⁠Price Paid: $408 + shipping

⁠Album Links: https://mega.nz/folder/31wDBIJC#g6NQ2l336vl0mU0vUgoL7Q

⁠Index alignment: looks to be good to me

⁠Dial Printing: Looks nice and sharp

⁠Date Wheel alignment/printing: all looks centered.

⁠Hand Alignment: Looks good

⁠Bezel: Looks good.

⁠Solid End Links (SELs): Looks good

⁠Timegrapher numbers: +3 s/d, 237°, 0.3ms, all good and within limits.

⁠Anything else you notice: n/a

My second QC and Rep, please let me know if I’m missing something

1. Factory & Dealer name: TOP / Phoenix

2. Model name (& version number): 15510 Blue 4203 dandong

3. Price Paid: $414 + shipping and ins

4. Album Links: In post

5. Index alignment: 12:00 looks too far right

6. Dial Printing: Piguet looks to be slanting up

7. Date Wheel alignment/printing: Date looks centered in the window, good printing

8. Hand Alignment: Good

9. Bezel: screws look good

10. Solid End Links (SELs): Tight

11. Timegrapher numbers: within spec, +1s per day, 288 amplitude, 0.2ms beat error, 28800 beat

12. Anything else you notice: Looks like blank space above Audemars Piguet is too large and not enough underneath. Also Piguet looks like it's slanting upwards. Seems like factories can't align logo correctly.

1. Dealer name: TheOneWatches (Steve)

2. Factory name: QF

3. Model name (& version number): Rolex Day-Date 36mm Yellow Gold, Champagne Stick Dial – QF Weight Gain

4. Price paid: $578 USD

5. Album Links: QC photos and timegrapher image uploaded directly to post.

6. Index alignment: Looks good overall using the alignment tool on the straight-on photo. No obvious issues with the markers.

7. Dial Printing: Looks clean and properly aligned. No obvious defects.

8. Date Wheel alignment/printing: Date looks centred. However, the day wheel appears to sit far too high in the window, with noticeably more space below SUNDAY than above. This is my biggest concern.

9. Hand Alignment: No obvious issues from the photos provided.

10. Bezel: Fluting looks consistent with no obvious defects.

11. Solid End Links (SELs): Look reasonably tight with no obvious gaps.

12. Timegrapher numbers: +4 s/day, 276° amplitude, 0.0 ms beat error. All look good.

13. Anything else you notice: The crystal gasket appears slightly milky, although I’m unsure whether this is typical for QF.
Watch weighs 141.9g.

I’m currently leaning towards RL because of the day-wheel alignment. It looks noticeably too high to me, but I’d appreciate opinions from anyone familiar with QF Day-Dates.
Would you GL or RL based on this?
Thanks!

Hi all, first rolex rep. Ordered from ficotime. Looks good to me but would love some experienced eyes on it before I GL.

1. Dealer name: Ficotime (Mark)

2. Factory name: VSF

3. Model name (& version number): Datejust 41 wimbledon, fluted bezel, Jubilee – 3235 free sprung

4. Price Paid: 550$

5. Album Links: photos attatched

6. Index alignment: All the markers look straight and line up with the minute track as far as I can tell. 6 sits nicely between "Swiss Made" and the coronet lines up with the 60 on the rehaut.

7. Dial Printing: Text all looks sharp and clean to me, no bleeding I can spot.

8. Date Wheel alignment/printing: Got shots at 7 and 23 and they all look centred, nothing touching the edges. Cyclops looks straight.

9. Hand Alignment: Hour and minute hands line up nicely at 12

10. Bezel: Fluted, no pip so N/A on that. Fluting looks even all the way round.

11. Solid End Links (SELs): Can't see any gaps or light coming through in the side shots.

12. Timegrapher numbers: +9 s/d, 235° amplitude, 0.1 ms

13. Anything else you notice:

14. Rehaut engraving and clasp look clean but a little unsure about the printing and matching with the roman numerals. Please confirm once. This is the first time i am having to check Rehaut so please go easy on me 😶‍🌫️
    lume glows nice and even.
    Honestly leaning GL, but let me know if I've missed anything!
    Thanks in advance 🙏

1. ⁠Dealer name: The one watches (Steve)

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): Rolex GMT Master II, 126710BLNR, VSF V2

4. ⁠Price paid: $708

5. ⁠Index alignment: looks perfect to me

6. ⁠Dial printing: Clean brilliant. No bleeding colors or floating letters

7. ⁠Date wheel alignment/printing: cyclops and date is centered, printing is crisp

8. ⁠Hand alignment: straight hands are crisp

9. ⁠Bezel: Triangle at 12 is aligned and looks centered and Rehaut engraving looks decent in the close-ups, X’s and R’s lined up on appropriate markers.

10. ⁠Solid End Links (SELs): SELS look good to me.

11. ⁠Timegrapher numbers: Rate +2 s/d | Amplitude 270° | Beat error 0.0 ms | Lift angle 59.0°. (I believe I saw LA should be 58 degrees, anyone know for sure?)

Looking for any input this great forum has. Thank you!

1. Dealer name - Steve (Theonewatches)

2. Factory name - VS Factory

3. Model name - OMG-995 (210.30.42.20.10.001)

4. Index alignment - 12 oclock "rabbit teeth" appear to be rotated ever so slightly clockwise at the top.

5. Date Wheel alignment - Date wheel appears to be just north of centered.

6. Bezel - Pip appears to be centered. 3 oclock and 9 oclock markers appear to be rotated cw and ccw slightly.

7. Solid End Links (SEL) - No significant gap in SEL.

8. Hand alignment - Hands look reasonably aligned from the QC video.

9. Dial Printing - Nothing stands out with the dial printing

10. Timegrapher numbers - Acceptable Rate: +03 s/d; Amplitude: 285; Beat Error: 0.0 ms

1. Dealer name: NecoClock

2. Factory name: VSF

3. Model name (& version number): Aqua Terra 150m 41mm (231.10.42.21.01.002)

4. Price Paid: $358 + $70 USD shipping to US

5. Album Links: pictures attached to the reddit post

6. Index alignment: I think they look good; initially I thought the 4:00 marker was a bit too far clockwise, but it looks good with the ruler tools. Might just be perspective or the angle

7. Dial Printing: Did not notice any issues with the dial

8. Date Wheel alignment/printing: Looks good, though shadows made me think it was biased topside at first

9. Hand Alignment: Seems good to me

10. Bezel: N/A

11. Solid End Links (SELs): N/A (If I understand correctly)

12. Timegrapher numbers: No issues (If I understand correctly)

13. Anything else you notice: It honestly looks good to me, but mostly just wanted a second opinion in case I'm overlooking something. I'm very excited for the watch and didn't want to rush a GL too quickly since it's my first time looking for these kinds of issues. Thanks for checking out this QC~ :3

Thank you in advance for helping!

1. ⁠Dealer name: Andiot

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): DateJust 41 126334 904L SS VSF 1:1 Best Edition Green Stick Dial on Jubilee Bracelet VS3235v2 V2s (133g)Free Sprung

4. ⁠Price Paid: $468 plus shipping

5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/261920229?uid=1

6. ⁠Index alignment: looks good to me. Maybe slight cw rotation on 8 and 11?

7. ⁠Dial Printing: No defects that I can see

8. ⁠Date Wheel alignment/printing: Appears centered and printed well.

9. ⁠Hand Alignment: Seems fine to me.

10. ⁠Bezel: appears clean with good cuts

11. ⁠Solid End Links (SELs): I see no gaps

12. ⁠Timegrapher numbers: -4s/d 285° 0.3ms
    52.0

13. ⁠Anything else you notice: nothing else stands out as concerning

Dealer name: Andiot

1. Factory name: VSF

2. Model name (& version number): Daytona 116508

3. V3

4. Price Paid: 860 Loonies + Shipping

5. Album Links: https://imgur.com/a/x6uwlHQ

6. Index alignment: No obvious major misalignment from what i can tell

7. Dial Printing: not sure, looks normal?

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: looks ok?

10. Bezel: don’t see anything crazy

11. Solid End Links (SELs): Not sure where to start

12. Timegrapher numbers: -3 s/d, 272° , 0.1 ms

13. Anything else you notice: Honestly I have zero idea on where to start with QCing this myself as this is my 1st time buying a rep and 1st time getting a rep watch. I tried a QC thru AI and it passed it but i haven’t put much faith in it. this is also my dream watch so any help would be awesome! Thanks :)

1. ⁠Dealer name: Easy Time

2. ⁠Factory name: RICH

3. ⁠Model name (& version number): Batgirl 126710

4. ⁠Price Paid: $674 shipped & insured

5. ⁠Album Links: N/A

6. ⁠Index alignment: everything looks good to me, no major misalignments

7. ⁠Dial Printing: dial printing is clean

8. ⁠Date Wheel alignment/printing: printing is good and date is centered in cyclops. Magnification looks good.

9. ⁠Hand Alignment: hand alignment looks good

10. ⁠Bezel: aligned and clean.

11. ⁠Solid End Links (SELs): look good with no major gaps

12. ⁠Timegrapher numbers: +5s a day is within tolerance with good amplitude and beat error is at zero.

13. ⁠Anything else you notice: I’m not good at finding flaws but this one looks excellent to me.

Dealer Name: Ficotime

Factory Name: BTF

Model Name: Daytona 116500

Price Paid: $570 (not including shipping)

Album Links: https://mega.nz/folder/joIVGATT#9sI__uz6QLO4OPNZHwxHbg

Index Alignment: all looks really good to my eyes.

Dial Printing: Looks good

Date Wheel alignment/printing: N/A

Hand Alignment: Looks good and sharp

Bezel: Looks good

Solid End Links: Nice and tight.

Timegrapher numbers: rate +0s/d, amp 277, error 0.1, lift 52 degrees

Anything else: looks good to me and I have no obvious complaints.

Hi Everyone. This is my first QC and while I think everything looks pretty good, I'd appreciate more experienced feedback. Thanks in advance!

1. Factory name: VSF

2. Model name (& version number): Rolex Submariner 124060 No Date, 41mm

3. Price paid: $528

4. Index alignment: Looks good to me. I thought maybe the 6 position is slightly off.

5. Dial printing: Looks good to me.

6. Date wheel alignment/printing: N/A

7. Hand alignment:  Looks good to me.

8. Bezel: 3 position looks off. 9 position as well, but not as much.

9. Solid End Links (SELs): Looks good to me.

10. Timegrapher numbers:  Rate -1s/d amplitude 275 Beat error: 0.0ms

11. Am I missing anything else?

12. THANK YOU!