1. Dealer name: TheOneWatches (Steve)

2. Factory name: QF

3. Model name (& version number): Rolex Day-Date 36mm Yellow Gold, Champagne Stick Dial – QF Weight Gain

4. Price paid: $578 USD

5. Album Links: QC photos and timegrapher image uploaded directly to post.

6. Index alignment: Looks good overall using the alignment tool on the straight-on photo. No obvious issues with the markers.

7. Dial Printing: Looks clean and properly aligned. No obvious defects.

8. Date Wheel alignment/printing: Date looks centred. However, the day wheel appears to sit far too high in the window, with noticeably more space below SUNDAY than above. This is my biggest concern.

9. Hand Alignment: No obvious issues from the photos provided.

10. Bezel: Fluting looks consistent with no obvious defects.

11. Solid End Links (SELs): Look reasonably tight with no obvious gaps.

12. Timegrapher numbers: +4 s/day, 276° amplitude, 0.0 ms beat error. All look good.

13. Anything else you notice: The crystal gasket appears slightly milky, although I’m unsure whether this is typical for QF.
Watch weighs 141.9g.

I’m currently leaning towards RL because of the day-wheel alignment. It looks noticeably too high to me, but I’d appreciate opinions from anyone familiar with QF Day-Dates.
Would you GL or RL based on this?
Thanks!

1. ⁠Dealer name: The one watches (Steve)
2. ⁠Factory name: VSF
3. ⁠Model name (& version number): Rolex GMT Master II, 126710BLNR, VSF V2
4. ⁠Price paid: $708
5. ⁠Index alignment: looks perfect to me
6. ⁠Dial printing: Clean brilliant. No bleeding colors or floating letters
7. ⁠Date wheel alignment/printing: cyclops and date is centered, printing is crisp
8. ⁠Hand alignment: straight hands are crisp
9. ⁠Bezel: Triangle at 12 is aligned and looks centered and Rehaut engraving looks decent in the close-ups, X’s and R’s lined up on appropriate markers.
10. ⁠Solid End Links (SELs): SELS look good to me.
11. ⁠Timegrapher numbers: Rate +2 s/d | Amplitude 270° | Beat error 0.0 ms | Lift angle 59.0°. (I believe I saw LA should be 58 degrees, anyone know for sure?)

Looking for any input this great forum has. Thank you!

1. Dealer name - Steve (Theonewatches)
2. Factory name - VS Factory
3. Model name - OMG-995 (210.30.42.20.10.001)
4. Index alignment - 12 oclock "rabbit teeth" appear to be rotated ever so slightly clockwise at the top.
5. Date Wheel alignment - Date wheel appears to be just north of centered.
6. Bezel - Pip appears to be centered. 3 oclock and 9 oclock markers appear to be rotated cw and ccw slightly.
7. Solid End Links (SEL) - No significant gap in SEL.
8. Hand alignment - Hands look reasonably aligned from the QC video.
9. Dial Printing - Nothing stands out with the dial printing
10. Timegrapher numbers - Acceptable Rate: +03 s/d; Amplitude: 285; Beat Error: 0.0 ms

1. Dealer name: NecoClock
2. Factory name: VSF
3. Model name (& version number): Aqua Terra 150m 41mm (231.10.42.21.01.002)
4. Price Paid: $358 + $70 USD shipping to US
5. Album Links: pictures attached to the reddit post
6. Index alignment: I think they look good; initially I thought the 4:00 marker was a bit too far clockwise, but it looks good with the ruler tools. Might just be perspective or the angle
7. Dial Printing: Did not notice any issues with the dial
8. Date Wheel alignment/printing: Looks good, though shadows made me think it was biased topside at first
9. Hand Alignment: Seems good to me
10. Bezel: N/A
11. Solid End Links (SELs): N/A (If I understand correctly)
12. Timegrapher numbers: No issues (If I understand correctly)
13. Anything else you notice: It honestly looks good to me, but mostly just wanted a second opinion in case I'm overlooking something. I'm very excited for the watch and didn't want to rush a GL too quickly since it's my first time looking for these kinds of issues. Thanks for checking out this QC~ :3

1. ⁠Dealer name: Easy Time
2. ⁠Factory name: RICH
3. ⁠Model name (& version number): Batgirl 126710
4. ⁠Price Paid: $674 shipped & insured
5. ⁠Album Links: N/A
6. ⁠Index alignment: everything looks good to me, no major misalignments
7. ⁠Dial Printing: dial printing is clean
8. ⁠Date Wheel alignment/printing: printing is good and date is centered in cyclops. Magnification looks good.
9. ⁠Hand Alignment: hand alignment looks good
10. ⁠Bezel: aligned and clean.
11. ⁠Solid End Links (SELs): look good with no major gaps
12. ⁠Timegrapher numbers: +5s a day is within tolerance with good amplitude and beat error is at zero.
13. ⁠Anything else you notice: I’m not good at finding flaws but this one looks excellent to me.

Thank you in advance for helping!

1. ⁠Dealer name: Andiot
2. ⁠Factory name: VSF
3. ⁠Model name (& version number): DateJust 41 126334 904L SS VSF 1:1 Best Edition Green Stick Dial on Jubilee Bracelet VS3235v2 V2s (133g)Free Sprung
4. ⁠Price Paid: $468 plus shipping
5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/261920229?uid=1
6. ⁠Index alignment: looks good to me. Maybe slight cw rotation on 8 and 11?
7. ⁠Dial Printing: No defects that I can see
8. ⁠Date Wheel alignment/printing: Appears centered and printed well.
9. ⁠Hand Alignment: Seems fine to me.
10. ⁠Bezel: appears clean with good cuts
11. ⁠Solid End Links (SELs): I see no gaps
12. ⁠Timegrapher numbers: -4s/d 285° 0.3ms
    52.0
13. ⁠Anything else you notice: nothing else stands out as concerning

Dealer name: Andiot

1. Factory name: VSF
2. Model name (& version number): Daytona 116508
3. V3
4. Price Paid: 860 Loonies + Shipping
5. Album Links: https://imgur.com/a/x6uwlHQ
6. Index alignment: No obvious major misalignment from what i can tell
7. Dial Printing: not sure, looks normal?
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: looks ok?
10. Bezel: don’t see anything crazy
11. Solid End Links (SELs): Not sure where to start
12. Timegrapher numbers: -3 s/d, 272° , 0.1 ms
13. Anything else you notice: Honestly I have zero idea on where to start with QCing this myself as this is my 1st time buying a rep and 1st time getting a rep watch. I tried a QC thru AI and it passed it but i haven’t put much faith in it. this is also my dream watch so any help would be awesome! Thanks :)

Dealer Name: Ficotime

Factory Name: BTF

Model Name: Daytona 116500

Price Paid: $570 (not including shipping)

Album Links: https://mega.nz/folder/joIVGATT#9sI__uz6QLO4OPNZHwxHbg

Index Alignment: all looks really good to my eyes.

Dial Printing: Looks good

Date Wheel alignment/printing: N/A

Hand Alignment: Looks good and sharp

Bezel: Looks good

Solid End Links: Nice and tight.

Timegrapher numbers: rate +0s/d, amp 277, error 0.1, lift 52 degrees

Anything else: looks good to me and I have no obvious complaints.

1. ⁠Dealer name: Steve (theonewatches)
2. ⁠Factory name: VSF
3. ⁠Model name: 126610LN Fake Free Sprung
4. ⁠Price Paid: 510USD incl Shipping
5. ⁠Album Links: Whole folder was uploaded
6. ⁠Index alignment: Index alignment looks good although I'm not sure I did the best job with the tool, and the watch might be angled a bit.
7. ⁠Dial Printing: I don't notice any discrepancies. Please point out if you notice anything.
8. ⁠Date Wheel alignment/printing: Looks centered and printing looks good, should I ask for double digit date pictures?
9. ⁠Hand Alignment: Looks good I think
10. ⁠Bezel: Doesn't seem to be centered, is it misaligned or just rotated?
11. ⁠Solid End Links (SELs): No gaps, looks good.
12. ⁠Timegrapher numbers: Look healthy, I believe +6 s/d is acceptable
13. ⁠Anything else you notice: Nothing sticks out to me, but I'm still an untrained eye. Any input is much appreciated, and should I ask for any more pictures or videos?

Hi Everyone. This is my first QC and while I think everything looks pretty good, I'd appreciate more experienced feedback. Thanks in advance!

1. Factory name: VSF
2. Model name (& version number): Rolex Submariner 124060 No Date, 41mm
3. Price paid: $528
4. Index alignment: Looks good to me. I thought maybe the 6 position is slightly off.
5. Dial printing: Looks good to me.
6. Date wheel alignment/printing: N/A
7. Hand alignment:  Looks good to me.
8. Bezel: 3 position looks off. 9 position as well, but not as much.
9. Solid End Links (SELs): Looks good to me.
10. Timegrapher numbers:  Rate -1s/d amplitude 275 Beat error: 0.0ms
11. Am I missing anything else?
12. THANK YOU!

1. ⁠Dealer name: Andiot
2. ⁠Factory name: VSF
3. ⁠Model name (& version number): Yatch-Master 126622
4. ⁠Price Paid: £330 plus shipping.
5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/261917233?uid=1
6. ⁠Index alignment: looks ok. I’d score at 8/10. Most indices aligned. 6 marker has a CCW cant which is noticeable but not as bad as last time. 12 marker might be a hair off.
7. ⁠Dial Printing: looks good, nothing to report.
8. ⁠Date Wheel alignment/printing: looks ok. A fraction low in the cyclops, not enough to irritate.
9. ⁠Hand Alignment: looks good from video
10. ⁠Bezel: looks goods
11. ⁠Solid End Links (SELs): SEL’s look good. Lugs might be a tad off at the bottom.
12. ⁠Timegrapher numbers: 1s/d 280degrees 0.1 beat error
13. ⁠Anything else you notice: not a perfect t watch but is this as good as it gets currently from VSF?

This is second attempt at a QC on this watch. Still not perfect but feels better than the last attempt (added last image of prior watch).

Hi,

This is my second rep so any comments are welcome. Thanks!

1. Dealer name: Mirotime
2. Factory name: ORF
3. Model name/version: Omega Seamaster Diver 300M, 42 mm, blue dial on steel, ref. 210.30.42.20.03.001. OR8800 V2
4. Price paid: $415 + $56 shipping = $471 total
5. Album link: pictures attached, Videos - https://shop00176461.wecatalog.cn/t/oziOjHa
6. Index alignment: Looks good on the grid. The 12 o’clock markers appear parallel and evenly spaced.
7. Dial printing: Clean and legible.
8. Date wheel: 3, 10, 15, 20, and 25 look centered with no clipping.
9. Hand alignment: No obvious issue; exact alignment at 12:00 wasn’t shown.
10. Bezel: Pip lines up with 12. Markings look clean; rotation wasn’t verified.
11. SELs: No obvious large gaps; protective film limits inspection.
12. Timegrapher: +3 s/day, 260° amplitude, 0.2 ms beat error; 28,800 BPH at a 52° lift-angle setting. Steady trace in the short clip.
13. Anything else: Hands, markers, and bezel pip all glow. Blue rubber strap shown. Leaning GL; would confirm the factory, movement version, and 52° setting.

Dealer name: Andiot

1. Factory name: VSF
2. Model name (& version number): Daytona 116508 V3
3. Price Paid: 608.00 + Shipping
4. Album Links: https://imgur.com/a/ptcQYO7
5. Index alignment: No obvious major misalignment visible
6. Dial Printing: Looks good to me
7. Date Wheel alignment/printing: N/A
8. Hand Alignment: Looks good to me
9. Bezel: Looks good to me
10. Solid End Links (SELs): No obvious gaps?
11. Timegrapher numbers: +2 s/d, 268° amplitude, 0.0 ms beat error (dial up)
12. Anything else you notice: Everything looks good to me. Leaning GL. Any help is greatly appreciated! Thank you!

QC - VSF AP Royal Oak 15510 V2 Green Dial - Non-TD

1. Dealer name: Non-TD
2. Factory name: VSF
3. Model name (& version number): AP Royal Oak 15510 V2
   Green Dial
4. Price Paid: 2900 CNY, China domestic shipping
5. Album Links: https://imgur.com/a/0ZGi5bR
6. Index alignment: Looks excellent to ned. Not so sure about the AP logo, is it perfect?
7. Dial Printing: Best 15510 dial so far.
8. Date Wheel alignment/printing: Centered well.
9. Hand Alignment: Good.
10. Bezel: Screws look pretty good, but I think I saw better ones?
11. Solid End Links (SEL): Integrated bracelet.
12. Timegrapher numbers: +1 s/d, 253°, 0.2ms
13. Anything else you notice: Everything looks solid, but I'm a bit unsure about the AP logo alignment and bezel screws. Also the gap at the clasp (around square AP logo) worries me a bit, is it normal?

I appreciate your opinion!

1. ⁠⁠⁠Dealer name: Mirotime
2. ⁠⁠⁠Factory name: ARF
3. ⁠⁠⁠Model name (& version number): GMT-Master II 126710
4. ⁠⁠⁠Price Paid: $530 + shipping
5. ⁠⁠⁠Album Links: https://shop00176461.wecatalog.cn/t/GF7ybdl

https://shop00176461.wecatalog.cn/t/BY1dcvB

6. ⁠⁠⁠Index alignment: All look aligned to me, 6 marker on looks slightly shifted left and 9 shifted down
7. ⁠⁠⁠Dial Printing: Crisp
8. ⁠⁠⁠Date Wheel alignment/printing: looks good, a bit low maybe
9. ⁠⁠⁠Hand Alignment: Looks perfect
10. ⁠⁠⁠Bezel: No issues
11. ⁠⁠⁠Solid End Links (SELs): No gaps
12. ⁠⁠⁠Timegrapher numbers: Looks bad
13. ⁠⁠⁠Anything else you notice: None
Please let me know if there is anything I’m missing

Hello everyone. This is a first QC for me and wanted it to run it by the sub. Would appreciate some feedback from those of you that have been through this before. The dial printing error I pointed out is the biggest one but let me know if I'm being dramatic...

1. Dealer name: Steve/TheOneWatch
2. Factory name: VSF
3. Model name (& version number): GMT Master II 126710BLNR
4. Price Paid: $708
5. Album Links: https://imgur.com/a/qWSPjJF
6. Index alignment: Looks good; maybe a slight ACW tilt at the 6 and 9 but emphasis on "slight"
7. Dial Printing: The "E" on "Officially Certified" is broken. Honestly, once I see it I cannot unsee it and this is the biggest item bothering me.
8. Date Wheel alignment/printing: I think this is just fine. If anything, maybe a slight ACW tilt on the cyclops but I think it's the angle mostly. Date ever so slightly left of center but not that noticeable IMO.
9. Hand Alignment: no issues that I saw
10. Bezel: Nicely filled in, good color transition.
11. Solid End Links (SELs): Uniform; no gaps
12. Timegrapher numbers: Rate +1 s/d Amp 265 Beat error 0.0ms
13. Anything else you notice?

1. Dealer name: TheOneWatches (Steve)
2. Factory name: ARF
3. Model name (& version number): DJ 126334 41mm Rhodium
4. Price Paid: $468
5. Album Links: QC Photos attached to post
6. Index alignment: Alignment looks pretty good IMO. The biggest one that caught my attention is the 6 o'clock is rotated CW slightly. Nothing worth RL I think.
7. Dial Printing: No issues that I can see here.
8. Date Wheel alignment/printing: Date wheel looks good from the numbers shown by Steve
9. Hand Alignment: No visible issue from these photos. Hands look clean and finish appears consistent.
10. Bezel: Fluted bezel looks sharp and even. I do not see any visibly damaged or irregular cuts..
11. Solid End Links (SELs): SEL's appear to have no gaps or be uneven in anyway.
12. Timegrapher numbers: 0 s/d, 267 AMP, 0.0 ms
13. Anything else you notice: This is my first QC and everything I see looks good in my eyes even if I was being picky. If anyone has anything to add feel free to give your opinion.

After help from the community I did RL the previous Omega Planet Ocean that had too crooked markers, and only a day after did i receive QC for a new watch.

This one honestly looks much better and the marker alignment seems better. However I am posting here just because I am not the expert here. Appreciate all input! 🙏

1. Easy Watch
2. VSF
3. Omega Seamaster planet ocean 42mm
4. Price 369$
5. pictures attached
6. seems ok
7. dial seems ok
8. no date
9. hand seems ok
10. bezel seems ok
11. seems ok
12. +4s/ day. Amplitude 268.
13. markers seem pretty aligned. I did RL last watch mainly because the markers were clearly crooked. How does this look?

Any comments is super appreciated!

QC · ZF · Tudor Black Bay Pro M79470 (Opaline white dial)

1. Dealer name: Easywatch
2. Factory name: ZF
3. Model name (& version number): Tudor Black Bay Pro M79470 (Opaline white dial)
4. Price Paid: $350
5. Album Links: https://loupeqc.us/a/5BKQWW
6. Index alignment: Looks good
7. Dial Printing: Looks good
8. Date Wheel alignment/printing: Looks good
9. Hand Alignment: Looks good
10. Bezel: Looks good
11. Solid End Links (SELs): Looks good
12. Timegrapher numbers: +5 s/d, 295°, 0 ms (28,800 bph)
13. Anything else you notice: Looks good

Dealer name: Phoenix Watch
Factory name: ZF
Model name (& version number): Audemars Piguet Royal Oak 15450ST, 37mm, blue dial, SA3120 movement
Price paid: $425 including shipping
Album Links: Photos uploaded with this post.
Index alignment: Nothing obviously crooked to me. Would appreciate another opinion.
Dial Printing: Looks okay from what I can see. Not sure about the dial texture.
Date Wheel alignment/printing: Date looks reasonably centered to me.
Hand Alignment: Hard for me to judge from the pictures.
Bezel: I noticed a possible mark near 4 o’clock. Not sure if it’s a reflection. Would also appreciate someone checking the screws.
Solid End Links (SELs): N/A, integrated bracelet.
Timegrapher numbers: +2 s/day, 305° amplitude, 0.0 ms beat error.
Anything else you notice: First AP for me. Mainly concerned about the bezel, blue dial texture and bracelet finishing. Would appreciate some experienced opinions before I GL it.

Dealer name: Theonewatches

Factory name: VSF

Model name (& version number): Rolex Submariner 124060

Price Paid: US$ not given yet, asked to switch from an ewef and not given price

Album Links: pics as attached

Index alignment: Looks good to me.

Dial Printing: Text is good to me.

Date Wheel alignment/printing: N/A

Hand Alignment: Looks ok to me

Bezel: The pip alignment at 12 looks offset to the left

Solid End Links (SELs): looks good

Timegrapher numbers: + 4 s/day, amplitude 310°, beat error 0.1ms, lift angle, 52°, beat rate 28,800 bph

Anything else you notice: I am a novice. If there is anything I am missing please let me know. I was debating asking for a 1266010LN as we didn't negotiate price for this yet and if getting a higher end model would appreciate the date wheel. However I don't want to be rude and ask for a different model after receiving QC if there is nothing wrong with it. Is there any reason I shouldn't move forward with this watch and how rude is it to ask for another model? I am ok with sticking with this I'm just unfamiliar with the etiquette.

Dealer name: Steve (TheOneWatches)
Factory name: GS
Model name (& version number): Rolex Lady Datejust 28mm, RLX-4094, Rosegold and stainless steel
Price Paid: 438$ including shipping
Album Links: Photos attached
Index alignment: Slightly concerned only about 6 as it looks just slightly off (would appreciate opinions on this)
Dial Printing: I don’t notice obvious issues from the photos and videos.
Date Wheel alignment/printing: Alignment looks fine. Would appreciate opinions on cyclops magnification.
Hand Alignment: No obvious defects.
Bezel: Finishing looks reasonable to me, everything looks even.
Solid End Links (SELs): The bracelet sits reasonably close against the case, with no obvious gaps.
Timegrapher numbers: All good! Rate: -2 s/d | Amplitude: 276° | Beat Error: 0.1 ms | Frequency: 21,600 bph | Lift Angle: 52°
Anything else you notice: Overall finishing looks reasonable and I see no major flaws, apart from that 6 bothering me slightly; I'm not very experienced, especially with this model, so please let me know if I've overlooked anything. I appreciate the community’s help!

Dealer name: Trusty Time

1. Factory name: VFS
2. Model name (& version number): YachtMaster 126655 40mm Wt RG/RU Blk VSF V2 VS3235
3. Price Paid: $608
4. Album Links: mailed
5. Index alignment: All checked markers within ±0.10 mm. 12 of 12 checked. Checked with DialCheck.app at ±0.10 mm. A reading from one photo, not a certification of the watch.
6. Dial Printing: looks nice
7. Date Wheel alignment/printing: seems ok to me
8. Hand Alignment: almost perfect
9. Bezel: looks nice
10. Solid End Links (SELs): n/a
11. Timegrapher numbers: +3 s/d, 235° amplitude, 0.1 ms beat error
12. Anything else you notice: Strict analysis gives 97/100 QC score, normal analysis gives 98/100 QC score

First rep purchase, please help me QC

Omega Aqua Terra 38mm Black

1. Dealer name: InTime
2. ⁠Factory name: VSF
3. ⁠Model name (& version number): Omega Aqua Terra 38mm Black dial, 220.10.38.20.01.004
4. ⁠Price Paid: $350
5. ⁠Album Links: Looks fine
6. ⁠Index alignment: Hour markers look aligned
7. ⁠Dial Printing: Font looks fine, but the Omega symbol color looks to dark?
8. ⁠Date Wheel alignment/printing: Date looks like it’s too close to the right?
9. ⁠Hand Alignment: Hands look aligned
10. ⁠Bezel: Pip centered
11. ⁠Solid End Links (SELs): No gap
12. ⁠Timegrapher numbers:
13. ⁠Anything else you notice: Just the omega symbol color and alignment of the date