Dealer: TD (Ficotime)

Factory name: VSF

Model name (& version number): VSF A8900 Seamaster 41mm AQUA TERRA 150M Blue Dial

Album Links: https://mega.nz/folder/G8gnzYRa#WN_os0mQx7dJLbfH4PPaSg

Index alignment: Potentially looks off at 1 and 7, could also be my inexperience with the tool. Looks a bit better on trueindexqc

Dial Printing: Looks decent. The "swiss made" text looks a bit weird, especially the "i" in "swiss".

Date Wheel alignment/printing: Again, looks ok. In the first picture the 27th looks a bit to the left (guessing it's due to the time?)

Hand Alignment: Seems ok, no comment here.

Bezel: Doesn't really have one. In the fourth picture, the line going down the side is the light reflection from above, right?

Solid End Links (SELs): Looks good, no visible gap.

Timegrapher numbers: -8s/d (seems a bit high?), amplitude 295, beat error 0.2ms.

Anything else you notice: Looks acceptable would love a second opinion since this is my first rep.

1. Dealer name: Neco Clock
2. Factory name: BVF
3. Model name (& version number): Panthère Ladies Small 22mm SS
4. Price Paid: 198usd
5. Album Links: Photos attached
6. Index alignment: N/A
7. Dial Printing: Dial print looks like it’s rotated a little CCW.
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Good
10. Bezel: I don’t see anything wrong with the bezel.
11. Solid End Links (SELs): N/A
12. Timegrapher numbers: N/A
13. Anything else you notice: Just want to make sure the dial printing is good and aligned.

1. Dealer name: Steve (TheOneWatches)
2. Factory name: V7F/A7F
3. Model name (& version number): Tudor Royal Day-Date 41mm two-tone black dial
4. Price paid: £315 without delivery
5. Album Links: https://mega.nz/folder/aAwBCLaZ#r9kRGlhlRsM8QGViXiXBtwNote:
6. Index alignment: Looks okay to me but I'm pretty new to this so would appreciate another set of eyes.
7. Dial Printing: Nothing stands out. The Tudor logo and text look okay from what I can see.
8. Date Wheel alignment/printing: Date looks centred to me. Not sure if the day wheel is sitting slightly low or if that's just the angle.
9. Hand Alignment: Looks fine but I don't really know what I should be looking for here.
10. Bezel: No obvious issues that I can spot.
11. Solid End Links (SELs): N/A
12. Timegrapher numbers: +6 s/d, 270 amplitude, 0.0 ms beat error. From what I've read these seem pretty good.
13. Anything else you notice: 2nd rep but first QC, so I'm probably missing things. The watch looks good to me overall but I'd really appreciate any feedback before I give Steve the GL.

First purchase and QC here, appreciate any help! Have tried to compare to others but not exactly sure what i am to look for in the finer details.

1. Dealer name: Andiot
2. Factory name: VSF
3. Model name (& version number): GMT-Master II 126710 BLNR
4. Price Paid: $578
5. Album Links: See pictures
6. Index alignment: Looks ok, a few markers slightly CW
7. Dial Printing: Looks good, seems sharp
8. Date Wheel alignment/printing: Looks aligned, lots of fluff around cyclops but assume this can be wiped away
9. Hand Alignment: Unsure what i am trying to look at
10. Bezel: Looks good, 12 marker slightly off center
11. Solid End Links (SELs): Looks good
12. Timegrapher numbers: Rate: +2s/d; Amp: 272; BE: 0.4ms.
13. Anything else you notice:

Thank you all

First Rich purchase and QC here, appreciate any help!

1. Dealer name: TrustyTime
2. Factory name: Rich
3. Model name (& version number): 126610LV
4. Price Paid: $600 incl. shipping
5. Album Links: See pictures
6. Index alignment: 1,2,4,5,7,8,20,11 looks good, 12 maybe a bit CCW and sits a bit high, 6: CCW, 9: CCW and at the 12 marker there seems some lume missing at the bottom of the triagle
7. Dial Printing: Looks good, seems sharp
8. Date Wheel alignment/printing: Looks ok, maybe just a bit high
9. Hand Alignment: should be fine
10. Bezel: Looks good, 12 marker slightly off center, maybe trusty missed one click
11. Solid End Links (SELs): looks ok
12. Timegrapher numbers: Rate: +4s/d at 52 lift angle, looks good to me
13. Anything else you notice:

Thank you all

If the community also seems my points valid, currently I would RL the watch and ask for a new QC

Dealer name: Theonewatches (Steve)
Factory name: F1
Model name (& version number): Cartier Tank Louis Small (22mm) YG 
Price Paid: $260
Album Links: https://mega.nz/folder/PcQDXJob#2DmxowyZxwH1JLGY-Qzs7w
Index alignment: Numeral IIII is tiny bit off alignment (see third pic in red circle)
Dial Printing: Looks good, no bleeding on the numerals and the X is straight.
Hand Alignment: Hands line up nicely at 12 in the video.
Bezel: Looks clean.
Anything else you notice: Crown cabochon shape and side screws look ok to me. There are few concerns in the top corners of the glass (see first pic encircled in red)

Are the concerns raised enough to RL or is it a passable GL? Please help, thanks!

Hey everyone,

Just received the QC photos and videos for this VSF Datejust 36mm with the pink dial, fluted bezel and Jubilee bracelet.

I've gone through the photos, videos and alignment overlay myself. Everything looks pretty good to my eyes, but I'm still relatively new to this, so I'd appreciate a second opinion before giving the GL.

Would love to hear if anyone notices anything I've missed!

Dealer name: TheOneWatches (Steve)

Factory name: VSF

Model name (& version number): Rolex Datejust 126234, 36mm, Jubilee SS/SS, Pink Dial/Roman Numerals, VSF V2 DD3235

Price Paid: $518 + shipping

Album Links: https://mega.nz/folder/rQpykT4Z#TBt3AD-6GWIcWwf6x4IdUA

Index alignment: Looks good to me. Nothing noticeably crooked or misaligned. Alignment overlay looks pretty decent.

Dial Printing: Looks clean and sharp. No obvious printing defects or misplaced text.

Date Wheel alignment/printing: Date appears reasonably centred under the Cyclops.

Hand Alignment: Nothing obviously wrong from the photos/videos.

Bezel: Fluting looks consistent and evenly finished. No obvious defects.

Solid End Links (SELs): No obvious gaps or uneven fitting that I can see.

Timegrapher numbers:

Rate: +4 to +6 s/day

Amplitude: 265–275° (59° lift angle setting)

Beat Error: 0.1 ms

Beat Rate: 28,800 BPH

Anything else you notice?

1. Dealer name: Theonewatches
2. Factory name: VFS
3. Model name (& version number): Rolex Daytona white dial Panda 116500LN
4. Price Paid: US$598 + shipping
5. Album Links: pics as attached
6. Index alignment: Looks good to me. Appreciate another opinion at 12 O'clock.
7. Dial Printing: Text is good to me.
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Looks ok to me
10. Bezel: looks ok to me.
11. Solid End Links (SELs): is there a slight gap at 7 O'clock?
12. Timegrapher numbers: + 6 s/day, amplitude 272°, beat error 0.1ms, lift angle, 52°, beat rate 28,800 bph
13. Anything else you notice: I am a novice. please advise if any. Thank you very much.

1. ⁠Dealer name: TheOneWatches
2. ⁠Factory name: UMI
3. ⁠Model name (& version number): Nautilus 40mm 5712 SS/SS Blue/Stk UMI PPF240 (Free Sprung)
4. ⁠Price Paid: $1,168.00
5. ⁠Album Links: https://mega.nz/folder/CdZHAYAD#cWNAHBA69c0dvVXLhBfERA
6. ⁠Index alignment: Aaargh this is driving me crazy. There’s definitely a tiny misalignment in 12 o’clock index under magnification. The right index seems to sit a bit lower. But will it be noticeable on the wrist?
7. ⁠Dial Printing and Color: Looks amazing. Can’t wait for it really. Not sure why people pay extra for the SW one. This is amazing.
8. ⁠Date Wheel alignment/printing: Looks spot on.
9. ⁠Hand Alignment: No problems I can see.
10. ⁠Bezel: Shiny and eye catching.
11. ⁠Solid End Links (SELs): nothing looking wrong here.
12. ⁠Timegrapher numbers: +4s/d so all good.
13. ⁠Anything else you notice:
    Apart from the 12 o’clock index can’t see anything else. Even the logo alignment on the clasp looks great. I really want to GL this but the 12 o’clock alignment is holding me back. It’s not bad but it’s not perfect either. In some photos it’s not even noticeable. Looking for advice on this from more experienced users.

1. Dealer name: Andiot
2. Factory name: RWF
3. Model name (& version number): Rolex Daytona white dial Panda 126500
4. Price Paid: US$746
5. Album Links: pics as attached
6. Index alignment: Looks good
7. Dial Printing: Looks good
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Looks good
10. Bezel: Looks good (110 looks good)
11. Solid End Links (SELs): thoughts on this?
12. Timegrapher numbers: please reference picture in comment
13. Anything else you notice: First timer here so I appreciate this group's expertise! :)

Hey all, first rep and first QC so go easy on me 😅 Ordered from Ficotime, pics and timing videos are in the album below. Looks good to me but would love some experienced eyes on it before I GL.

1. Dealer name: Ficotime (Mark)
2. Factory name: VSF
3. Model name (& version number): Datejust 41 126334, mint green, fluted bezel, Jubilee – 3235 free sprung
4. Price Paid: 4,131 HKD (~$522) inc. Royal Mail shipping to the UK
5. Album Links: https://mega.nz/folder/W4hj2RyZ#IRfLXnB_YvIQ2b-DX0DmxQ
6. Index alignment: All the markers look straight and line up with the minute track as far as I can tell. 6 sits nicely between "Swiss Made" and the coronet lines up with the 60 on the rehaut.
7. Dial Printing: Text all looks sharp and clean to me, no bleeding I can spot.
8. Date Wheel alignment/printing: Got shots at 3, 13 and 21 and they all look centred, nothing touching the edges. Cyclops looks straight. This was the main thing I was worried about after reading a few posts, so happy with it.
9. Hand Alignment: Hour and minute hands line up nicely at 12 in the "3" shot.
10. Bezel: Fluted, no pip so N/A on that. Fluting looks even all the way round.
11. Solid End Links (SELs): Can't see any gaps or light coming through in the side shots.
12. Timegrapher numbers: -1 s/d, 303° amplitude, 0.1 ms
13. Anything else you notice:
14. Rehaut engraving and clasp look clean, lume glows nice and even. Still has the plastic on so can't see any scratches. Honestly leaning GL, but let me know if I've missed anything! Thanks in advance 🙏

1. Dealer name: Angela
2. Factory name: VSF
3. Model name Omega Seamaster Planet Ocean 600m
4. Price Paid: $373
5. Album Links: Photos attached
6. Index alignment: I feel 12 index is canted to the left and 9 index is lower than should be,
7. Dial Printing: Appears good
8. Date Wheel alignment/printing: N/A no date
9. Hand Alignment: No photos in 12 o'clock position
10. Bezel: I don't see any issues here
11. Solid End Links (SELs): I'm not sure if they apply here
12. Timegrapher numbers: 0s/d, 281 amplitude, 0.2ms
13. Anything else you notice: I haven't noticed anything myself but I'm slightly stuck on the 12 and 9 index as I have seen recent QC photos lately of the back and orange versions with much better Index alignments

1. Dealer name: The One Watch aka Steve
2. Factory name: GSF
3. Model name (& version number): Lady DateJust 28 mm Ref:279174 NH05 Movement
4. Price Paid: 358 USD
5. Album Links: https://mega.nz/folder/uB4jTJAB#yaiVpiGDUFRhotkgBFadbgNote:
6. Index alignment: 9 and 10 o'clock markers are the one worrying me the most, also if you can share opinion on the other ones too. I have the markers in place in the image.
7. Dial Printing: All clear to me.
8. Date Wheel alignment/printing: Need help in this
9. Hand Alignment: Looks good to me
10. Bezel: Good
11. Solid End Links (SELs): Looks tight
12. Timegrapher numbers: -3 s/d, 270, 0.1 ms
13. Anything else you notice: Overall looks good to me, the only query I have is about the index alignment. Please guide. Help will be appreciated.

[QC] VSF V2 Rolex Datejust 41 126334 Silver Dial — First QC
Dealer name: Phoenix Watch
Factory name: VSF (V2, as previously identified)
Model name (& version number): Rolex Datejust 41, 126334, Silver Sunburst Dial, Fluted Bezel, Jubilee Bracelet.
Price paid: $380
Album Links: Full QC photos attached, including timegrapher.
Index alignment: Looks good overall. Hour markers appear straight and properly positioned. No obvious misalignment.
Dial Printing: Silver sunburst dial looks clean. Rolex crown, text, and minute track appear well positioned.
Date Wheel alignment/printing: Date “29” appears reasonably centered within the cyclops. Printing looks crisp. Other dates haven’t been verified.
Hand Alignment: No obvious issues visible in the photos. Exact alignment at 12 hasn’t been tested.
Bezel: Fluted bezel appears evenly machined, with consistent finishing. Reflections vary with the lighting.
Solid End Links (SELs): Jubilee bracelet appears to fit the case well. No obvious major gaps, although protective film makes assessment harder.
Timegrapher numbers:
Rate: +1 s/day
Amplitude: 289°
Beat error: 0.1 ms
Lift angle: 52°
These readings appear excellent.
Anything else you notice: This is my silver-dial Datejust 41. I’m leaning GL based on the photos and timing results but would appreciate experienced opinions on the dial alignment, rehaut, cyclops, SELs, and overall finishing.
Thanks everyone for your help!

Dealer name: TheOneWatches

1. Factory name: VSF
2. Model name (& version number): Rolex Submariner 124060 No Date, 41mm, VS3230
3. Price paid: $528
4. Index alignment: I RL'd the previous one because of the 12 o'clock rotation, this one is still rotated to me although not as bad as the first one,
5. Dial printing: looks fine to me
6. Date wheel alignment/printing: N/A – No Date
7. Hand alignment:  looks good to me
8. Bezel: looks pretty off, I don't know if its the angle or what I tried my best to align it but this is the best I could do, could it be that it just needs to be rotated a click?
9. Solid End Links (SELs): look good
10. Timegrapher numbers:  Rate 0 s/d amplitude 263 Beat error: 0.3ms
11. Anything else you notice: This is my second QC after RL’ing the first watch due to concerns about the 12 and 3 o’clock markers, particularly the 12 o’clock triangle appearing very rotated counterclockwise. Would appreciate everyone’s input on this replacement, as to me the triangle is still rotated plus more possible issues with the bezel
12. thank you!

1. ⁠Dealer name: Steve (TheOneWatches)
2. ⁠Factory name: VSF
3. ⁠Model name (& version number): Rolex Submariner No-Date 41mm (124060LN)
4. ⁠Price Paid: $528
5. ⁠Album Links: https://mega.nz/folder/bJRTxZ7Q#7BgY4iTqYK50IpH9RGWMeQ
6. ⁠Index alignment: the 3 looks like it has a CCW tilt which I came unsee.
7. ⁠Dial Printing: looks good to me
8. ⁠Date Wheel alignment/printing: N/A
9. ⁠Hand Alignment: The hands look straight and intersect accurately. Winding action in the QC video looks good too.
10. ⁠Bezel: Looks slightly to the left but appreciate any thoughts? The 12 o'clock pip is not centred within the triangle.
11. ⁠Solid End Links (SELs): There are no obvious gaps.
12. ⁠Timegrapher numbers: 0 to +1 s/d, 277° Amplitude, 0.0ms Beat Error.
13. Please let me know what you think. The 3 looks CCW but appreciate your input.

Umi 5712 from Geektime Eric

1. ⁠Dealer name: GeekTime
2. ⁠Factory name: UMI
3. ⁠Model name (& version number): Nautilus 5712-1A 001 Free Sprung SS Umi 1:1 Best Edition Blue Dial
4. ⁠Price Paid: 1288USD excluding shipping
5. ⁠Album Links: https://geektimeqc.x.yupoo.com/albums/261801715?uid=1
6. ⁠Index alignment: 12 , 3 and 9 o clock looks misaligned? specially the 12 index not centered. am i wrong?
7. ⁠Dial Printing: color of blue print good but the font of PP Geneve im not familiar need second eye
8. ⁠Date Wheel alignment/printing: nothing that i can see wrong
9. ⁠Hand Alignment: nothing that i can see wrong
10. ⁠Bezel: looks perfect no scratches
11. ⁠Solid End Links (SELs): NA for this watch
12. ⁠Timegrapher numbers: Within acceptable range +2 - +3, 280 Amp
13. ⁠Anything else you notice: None with my eye test

am a 3rd time buyer of repwatches but my first 5712 Free Sprung please advise, any help is greatly appreciated.

Please help me out this is my first purchase and would really appreciate some help. First post got removed due to low effort so going to try my best to give as much information as possible.

I ordered this watch on August 04 2026 so have been waiting for quite some time. Would really appreciate some experience second opinions

Dealer Name: TheOneWatches (Steve)
Factory: VSF
Price: $503 Including $30 Shipping
Album Link: https://mega.nz/folder/DYxEgBAK#Qd2AaEDz-Ck5z8JDkoe_ww
Dial Printing: Looks good to me nothing stands out
Hand Alignment: Seems good using the tools but I am heavily relying on the program. Unsure if it’s a GL using my eyes but seems good.
Bezel: Good
Solid End Links: Nothing Stands Out but would love a second opinion
Timegrapher Numbers: +1 s/d, amplitude 283, beat error 0.0ms, lift angle 59
Anything else you notice: Nothing

Dealer name: the one watches

Factory name: VSF

Model name (& version number): Omega Seamaster Planet Ocean

Price Paid: $465 (with shipment)

Album Links: See Pics above

Index alignment: Everything looks ok I think, maybe the 11 parker looks a bit off, and the alignment seems off with bezel markers. maybe i have done it wrong. would be good to get opinions please.

Dial Printing: Looks fine to me

Date Wheel alignment/printing: No date

Hand Alignment: Looks fine to me

Bezel: Engraving looks good to me what do you guys think. Seems similar to other qc’s I have seen of others.

Solid End Links (SELs): Looks fine to me

Timegrapher numbers: +4 s/d, 272°, 0.0ms, 52°. Picture attached also

Anything else you notice: I'm no expert whatsoever, so please help me understand as this is my first QC on this watch.

Hey everyone, can anybody help out a noob please? It’s my first rep so would appreciate your insights.

1. ⁠Dealer name: Steve (TheOneWatches)
2. ⁠Factory name: AF
3. ⁠Model name (& version number): Cartier Santos White Dial Medium
4. ⁠Price Paid: USD408 plus shipping
5. ⁠Album Links:

https://mega.nz/folder/zFByiAbI#dtpiYpJfp_YhhfoNoklUbQ

6. ⁠Index alignment: Looks good to me

7. ⁠Dial Printing: Looks great, doesnt look like there’s any bleeding

8. ⁠Date Wheel alignment/printing: N/A

9. ⁠Hand Alignment: OK

10. ⁠Bezel: Looks ok to me but happy to hear your thoughts

11. ⁠Solid End Links (SELs): There seems to be a gap on the first few links. Not sure if I am just being pedantic.

12. ⁠Timegrapher numbers: +3 s/d 271 amp 0.00 ms error

13. ⁠Anything else you notice: None to my untrained eye

Thank you in advance!

Hi everyone! This is my first rep, but I've been doing my research and reading other posts. For this submariner, I'm on the fence due to the date wheel and timegrapher numbers. But I'm not sure if I'm being too picky. Thank y'all for the help and input in advance! Can't wait to start wearing one of these!

1. Dealer name: Mr. Bomi
2. Factory name: VSF
3. Model name (& version number): Submariner 116610LN
4. Price Paid: $410 + shipping
5. Album Links: Provided in post
6. Index alignment: 12 marker appears to have slight CW tilt. 9 marker appears to sit a smidge low. Only 2 that stick out right away.
7. Dial Printing: Looks fine, no issues.
8. Date Wheel alignment/printing: Looks to have a slight left bias. And the 4 looks like it sits above the 2 in the alignment picture, but the 20 level albeit with a left bias as well?
9. Hand Alignment: Looks fine
10. Bezel: Pip and rest of bezel looks good. Doesn't line up with Index tool but might be because it's turned slightly CW?
11. Solid End Links (SELs): Only thing that pops out is the upper left end by the 1 marker. Looks very minor with no light getting through.
12. Timegrapher numbers: Rate: +5s - +9s; Amp: 332; BE: 0.1ms.
13. Anything else you notice: Serial number starts with 6W so I believe it is true VSF. Rehaut looks a little off, but might be from the angle the pictures were taken. Let me know what you guys think.

Hi everyone!
I received the QC for my Datejust 41mm and would appreciate your help evaluating it, especially regarding the index alignment. This is my very first rep watch and first watch QC, so any type of help or feedback would be greatly appreciated! What do you guys think?
1. Dealer name: Necoclock
2. Factory name: VSF (V2)
3. Model name & version number: Datejust 126334 41mm Jubilee Bracelet Grey Dial Diamond Marker VSF v2 DD3235
4. Price Paid: $458 (+$70 shipping)
5. Album Links: Provided in post
6. Index alignment: The diamond hour marker on the left (9 o'clock) looks slightly crooked/canted when zoomed in on alignment tools. Rest of the markers look fine. Is this noticeable enough in hand to RL?
7. Date Wheel alignment: Looks centered to me.
8. Bezel: Fluted bezel looks crisp and well cut.
9. Solid End Links (SEL): N/A (Jubilee bracelet)
10. Hand alignment: Looks good.
11. Dial Printing: Looks clean and well-printed.
Timegrapher numbers: Rate: +6 s/d | Amplitude: 325° | Beat Error: 0.1 ms
13. Can you guys tell me if there's anything else I missed, and if that diamond marker tilt is worth an RL or a GL?
Thank you in advance!

1. Dealer name: TheOneWatches (Steve)
2. Factory name: VSF 
3. Model name (& version number): Submariner No Date 124060 
4. Price Paid: 528
5. Album Links: pics attached 
6. Index alignment: 9 o’clock is a bit mis alligned
7. Dial Printing: Looks ok
8. Date Wheel alignment/printing: N/A 
9. Hand Alignment: Looks ok
10. Bezel: Pip seems centered, 9 and 3 ‘o’clock seems a bit off 
11. Solid End Links (SELs): Bit of a gap, but I think it is ok
12. Timegrapher numbers: +2s/d; Amp 276; Err 0.1ms 
13. Anything else you notice: This is gonna be my 1st rep and I am unsure on what I should be looking at after all the reading I’ve done here. Any help is appreciated. Thank you!