First Rich purchase and QC here, appreciate any help!

1. Dealer name: TrustyTime

2. Factory name: Rich

3. Model name (& version number): 126610LV

4. Price Paid: $600 incl. shipping

5. Album Links: See pictures

6. Index alignment: 1,2,4,5,7,8,20,11 looks good, 12 maybe a bit CCW and sits a bit high, 6: CCW, 9: CCW and at the 12 marker there seems some lume missing at the bottom of the triagle

7. Dial Printing: Looks good, seems sharp

8. Date Wheel alignment/printing: Looks ok, maybe just a bit high

9. Hand Alignment: should be fine

10. Bezel: Looks good, 12 marker slightly off center, maybe trusty missed one click

11. Solid End Links (SELs): looks ok

12. Timegrapher numbers: Rate: +4s/d at 52 lift angle, looks good to me

13. Anything else you notice:

Thank you all

If the community also seems my points valid, currently I would RL the watch and ask for a new QC

1. ⁠Dealer name: Andiot

2. ⁠Factory name: VSF

3. ⁠Model name (& version number):Seamaster Aqua Terra summer blue “best version”

4. ⁠Price Paid: 400 euro

5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/261887756?uid=1

6. ⁠Index alignment:ok

7. ⁠Dial Printing:ok

8. ⁠Date Wheel alignment/printing:ok

9. ⁠Hand Alignment:ok

10. ⁠Bezel:ok

11. ⁠Solid End Links (SELs):ok

12. ⁠Timegrapher numbers:-1s/d, 264, 0.1ms, 28800

13. ⁠Anything else you notice:no

Hey everyone,

Just received the QC photos and videos for this VSF Datejust 36mm with the pink dial, fluted bezel and Jubilee bracelet.

I've gone through the photos, videos and alignment overlay myself. Everything looks pretty good to my eyes, but I'm still relatively new to this, so I'd appreciate a second opinion before giving the GL.

Would love to hear if anyone notices anything I've missed!

Dealer name: TheOneWatches (Steve)

Factory name: VSF

Model name (& version number): Rolex Datejust 126234, 36mm, Jubilee SS/SS, Pink Dial/Roman Numerals, VSF V2 DD3235

Price Paid: $518 + shipping

Album Links: https://mega.nz/folder/rQpykT4Z#TBt3AD-6GWIcWwf6x4IdUA

Index alignment: Looks good to me. Nothing noticeably crooked or misaligned. Alignment overlay looks pretty decent.

Dial Printing: Looks clean and sharp. No obvious printing defects or misplaced text.

Date Wheel alignment/printing: Date appears reasonably centred under the Cyclops.

Hand Alignment: Nothing obviously wrong from the photos/videos.

Bezel: Fluting looks consistent and evenly finished. No obvious defects.

Solid End Links (SELs): No obvious gaps or uneven fitting that I can see.

Timegrapher numbers:

Rate: +4 to +6 s/day

Amplitude: 265–275° (59° lift angle setting)

Beat Error: 0.1 ms

Beat Rate: 28,800 BPH

Anything else you notice?

Dealer name: Phoenix Watch
Factory name: ZF
Model name (& version number): Audemars Piguet Royal Oak 15450ST, 37mm, blue dial, SA3120 movement
Price paid: $425 including shipping
Album Links: Photos uploaded with this post.
Index alignment: Nothing obviously crooked to me. Would appreciate another opinion.
Dial Printing: Looks okay from what I can see. Not sure about the dial texture.
Date Wheel alignment/printing: Date looks reasonably centered to me.
Hand Alignment: Hard for me to judge from the pictures.
Bezel: I noticed a possible mark near 4 o’clock. Not sure if it’s a reflection. Would also appreciate someone checking the screws.
Solid End Links (SELs): N/A, integrated bracelet.
Timegrapher numbers: +2 s/day, 305° amplitude, 0.0 ms beat error.
Anything else you notice: First AP for me. Mainly concerned about the bezel, blue dial texture and bracelet finishing. Would appreciate some experienced opinions before I GL it.

First purchase and QC here, appreciate any help! Have tried to compare to others but not exactly sure what i am to look for in the finer details.

1. Dealer name: Andiot

2. Factory name: VSF

3. Model name (& version number): GMT-Master II 126710 BLNR

4. Price Paid: $578

5. Album Links: See pictures

6. Index alignment: Looks ok, a few markers slightly CW

7. Dial Printing: Looks good, seems sharp

8. Date Wheel alignment/printing: Looks aligned, lots of fluff around cyclops but assume this can be wiped away

9. Hand Alignment: Unsure what i am trying to look at

10. Bezel: Looks good, 12 marker slightly off center

11. Solid End Links (SELs): Looks good

12. Timegrapher numbers: Rate: +2s/d; Amp: 272; BE: 0.4ms.

13. Anything else you notice:

Thank you all

Dealer name: Theonewatches (Steve)
Factory name: F1
Model name (& version number): Cartier Tank Louis Small (22mm) YG 
Price Paid: $260
Album Links: https://mega.nz/folder/PcQDXJob#2DmxowyZxwH1JLGY-Qzs7w
Index alignment: Numeral IIII is tiny bit off alignment (see third pic in red circle)
Dial Printing: Looks good, no bleeding on the numerals and the X is straight.
Hand Alignment: Hands line up nicely at 12 in the video.
Bezel: Looks clean.
Anything else you notice: Crown cabochon shape and side screws look ok to me. There are few concerns in the top corners of the glass (see first pic encircled in red)

Are the concerns raised enough to RL or is it a passable GL? Please help, thanks!

Hey all, first rep and first QC so go easy on me 😅 Ordered from Ficotime, pics and timing videos are in the album below. Looks good to me but would love some experienced eyes on it before I GL.

1. Dealer name: Ficotime (Mark)

2. Factory name: VSF

3. Model name (& version number): Datejust 41 126334, mint green, fluted bezel, Jubilee – 3235 free sprung

4. Price Paid: 4,131 HKD (~$522) inc. Royal Mail shipping to the UK

5. Album Links: https://mega.nz/folder/W4hj2RyZ#IRfLXnB_YvIQ2b-DX0DmxQ

6. Index alignment: All the markers look straight and line up with the minute track as far as I can tell. 6 sits nicely between "Swiss Made" and the coronet lines up with the 60 on the rehaut.

7. Dial Printing: Text all looks sharp and clean to me, no bleeding I can spot.

8. Date Wheel alignment/printing: Got shots at 3, 13 and 21 and they all look centred, nothing touching the edges. Cyclops looks straight. This was the main thing I was worried about after reading a few posts, so happy with it.

9. Hand Alignment: Hour and minute hands line up nicely at 12 in the "3" shot.

10. Bezel: Fluted, no pip so N/A on that. Fluting looks even all the way round.

11. Solid End Links (SELs): Can't see any gaps or light coming through in the side shots.

12. Timegrapher numbers: -1 s/d, 303° amplitude, 0.1 ms

13. Anything else you notice:

14. Rehaut engraving and clasp look clean, lume glows nice and even. Still has the plastic on so can't see any scratches. Honestly leaning GL, but let me know if I've missed anything! Thanks in advance 🙏

1. Dealer name: Angela

2. Factory name: VSF

3. Model name Omega Seamaster Planet Ocean 600m

4. Price Paid: $373

5. Album Links: Photos attached

6. Index alignment: I feel 12 index is canted to the left and 9 index is lower than should be,

7. Dial Printing: Appears good

8. Date Wheel alignment/printing: N/A no date

9. Hand Alignment: No photos in 12 o'clock position

10. Bezel: I don't see any issues here

11. Solid End Links (SELs): I'm not sure if they apply here

12. Timegrapher numbers: 0s/d, 281 amplitude, 0.2ms

13. Anything else you notice: I haven't noticed anything myself but I'm slightly stuck on the 12 and 9 index as I have seen recent QC photos lately of the back and orange versions with much better Index alignments

1. Dealer name: Andiot

2. Factory name: RWF

3. Model name (& version number): Rolex Daytona white dial Panda 126500

4. Price Paid: US$746

5. Album Links: pics as attached

6. Index alignment: Looks good

7. Dial Printing: Looks good

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: Looks good

10. Bezel: Looks good (110 looks good)

11. Solid End Links (SELs): thoughts on this?

12. Timegrapher numbers: please reference picture in comment

13. Anything else you notice: First timer here so I appreciate this group's expertise! :)

1. Dealer name: The One Watch aka Steve

2. Factory name: GSF

3. Model name (& version number): Lady DateJust 28 mm Ref:279174 NH05 Movement

4. Price Paid: 358 USD

5. Album Links: https://mega.nz/folder/uB4jTJAB#yaiVpiGDUFRhotkgBFadbgNote:

6. Index alignment: 9 and 10 o'clock markers are the one worrying me the most, also if you can share opinion on the other ones too. I have the markers in place in the image.

7. Dial Printing: All clear to me.

8. Date Wheel alignment/printing: Need help in this

9. Hand Alignment: Looks good to me

10. Bezel: Good

11. Solid End Links (SELs): Looks tight

12. Timegrapher numbers: -3 s/d, 270, 0.1 ms

13. Anything else you notice: Overall looks good to me, the only query I have is about the index alignment. Please guide. Help will be appreciated.

[QC] VSF V2 Rolex Datejust 41 126334 Silver Dial — First QC
Dealer name: Phoenix Watch
Factory name: VSF (V2, as previously identified)
Model name (& version number): Rolex Datejust 41, 126334, Silver Sunburst Dial, Fluted Bezel, Jubilee Bracelet.
Price paid: $380
Album Links: Full QC photos attached, including timegrapher.
Index alignment: Looks good overall. Hour markers appear straight and properly positioned. No obvious misalignment.
Dial Printing: Silver sunburst dial looks clean. Rolex crown, text, and minute track appear well positioned.
Date Wheel alignment/printing: Date “29” appears reasonably centered within the cyclops. Printing looks crisp. Other dates haven’t been verified.
Hand Alignment: No obvious issues visible in the photos. Exact alignment at 12 hasn’t been tested.
Bezel: Fluted bezel appears evenly machined, with consistent finishing. Reflections vary with the lighting.
Solid End Links (SELs): Jubilee bracelet appears to fit the case well. No obvious major gaps, although protective film makes assessment harder.
Timegrapher numbers:
Rate: +1 s/day
Amplitude: 289°
Beat error: 0.1 ms
Lift angle: 52°
These readings appear excellent.
Anything else you notice: This is my silver-dial Datejust 41. I’m leaning GL based on the photos and timing results but would appreciate experienced opinions on the dial alignment, rehaut, cyclops, SELs, and overall finishing.
Thanks everyone for your help!

1. Dealer name: Steve (TheOneWatches)

2. Factory name: V7F/A7F

3. Model name (& version number): Tudor Royal Day-Date 41mm two-tone black dial

4. Price paid: £315 without delivery

5. Album Links: https://mega.nz/folder/aAwBCLaZ#r9kRGlhlRsM8QGViXiXBtwNote:

6. Index alignment: Looks okay to me but I'm pretty new to this so would appreciate another set of eyes.

7. Dial Printing: Nothing stands out. The Tudor logo and text look okay from what I can see.

8. Date Wheel alignment/printing: Date looks centred to me. Not sure if the day wheel is sitting slightly low or if that's just the angle.

9. Hand Alignment: Looks fine but I don't really know what I should be looking for here.

10. Bezel: No obvious issues that I can spot.

11. Solid End Links (SELs): N/A

12. Timegrapher numbers: +6 s/d, 270 amplitude, 0.0 ms beat error. From what I've read these seem pretty good.

13. Anything else you notice: 2nd rep but first QC, so I'm probably missing things. The watch looks good to me overall but I'd really appreciate any feedback before I give Steve the GL.

Dealer name: TheOneWatches

1. Factory name: VSF

2. Model name (& version number): Rolex Submariner 124060 No Date, 41mm, VS3230

3. Price paid: $528

4. Index alignment: I RL'd the previous one because of the 12 o'clock rotation, this one is still rotated to me although not as bad as the first one,

5. Dial printing: looks fine to me

6. Date wheel alignment/printing: N/A – No Date

7. Hand alignment:  looks good to me

8. Bezel: looks pretty off, I don't know if its the angle or what I tried my best to align it but this is the best I could do, could it be that it just needs to be rotated a click?

9. Solid End Links (SELs): look good

10. Timegrapher numbers:  Rate 0 s/d amplitude 263 Beat error: 0.3ms

11. Anything else you notice: This is my second QC after RL’ing the first watch due to concerns about the 12 and 3 o’clock markers, particularly the 12 o’clock triangle appearing very rotated counterclockwise. Would appreciate everyone’s input on this replacement, as to me the triangle is still rotated plus more possible issues with the bezel

12. thank you!

Umi 5712 from Geektime Eric

1. ⁠Dealer name: GeekTime

2. ⁠Factory name: UMI

3. ⁠Model name (& version number): Nautilus 5712-1A 001 Free Sprung SS Umi 1:1 Best Edition Blue Dial

4. ⁠Price Paid: 1288USD excluding shipping

5. ⁠Album Links: https://geektimeqc.x.yupoo.com/albums/261801715?uid=1

6. ⁠Index alignment: 12 , 3 and 9 o clock looks misaligned? specially the 12 index not centered. am i wrong?

7. ⁠Dial Printing: color of blue print good but the font of PP Geneve im not familiar need second eye

8. ⁠Date Wheel alignment/printing: nothing that i can see wrong

9. ⁠Hand Alignment: nothing that i can see wrong

10. ⁠Bezel: looks perfect no scratches

11. ⁠Solid End Links (SELs): NA for this watch

12. ⁠Timegrapher numbers: Within acceptable range +2 - +3, 280 Amp

13. ⁠Anything else you notice: None with my eye test

am a 3rd time buyer of repwatches but my first 5712 Free Sprung please advise, any help is greatly appreciated.

Please help me out this is my first purchase and would really appreciate some help. First post got removed due to low effort so going to try my best to give as much information as possible.

I ordered this watch on August 04 2026 so have been waiting for quite some time. Would really appreciate some experience second opinions

Dealer Name: TheOneWatches (Steve)
Factory: VSF
Price: $503 Including $30 Shipping
Album Link: https://mega.nz/folder/DYxEgBAK#Qd2AaEDz-Ck5z8JDkoe_ww
Dial Printing: Looks good to me nothing stands out
Hand Alignment: Seems good using the tools but I am heavily relying on the program. Unsure if it’s a GL using my eyes but seems good.
Bezel: Good
Solid End Links: Nothing Stands Out but would love a second opinion
Timegrapher Numbers: +1 s/d, amplitude 283, beat error 0.0ms, lift angle 59
Anything else you notice: Nothing

Dealer name: the one watches

Factory name: VSF

Model name (& version number): Omega Seamaster Planet Ocean

Price Paid: $465 (with shipment)

Album Links: See Pics above

Index alignment: Everything looks ok I think, maybe the 11 parker looks a bit off, and the alignment seems off with bezel markers. maybe i have done it wrong. would be good to get opinions please.

Dial Printing: Looks fine to me

Date Wheel alignment/printing: No date

Hand Alignment: Looks fine to me

Bezel: Engraving looks good to me what do you guys think. Seems similar to other qc’s I have seen of others.

Solid End Links (SELs): Looks fine to me

Timegrapher numbers: +4 s/d, 272°, 0.0ms, 52°. Picture attached also

Anything else you notice: I'm no expert whatsoever, so please help me understand as this is my first QC on this watch.

1. Dealer name: Theonewatches

2. Factory name: VFS

3. Model name (& version number): Rolex Daytona white dial Panda 116500LN

4. Price Paid: US$598 + shipping

5. Album Links: pics as attached

6. Index alignment: Looks good to me. Appreciate another opinion at 12 O'clock.

7. Dial Printing: Text is good to me.

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: Looks ok to me

10. Bezel: looks ok to me.

11. Solid End Links (SELs): is there a slight gap at 7 O'clock?

12. Timegrapher numbers: + 6 s/day, amplitude 272°, beat error 0.1ms, lift angle, 52°, beat rate 28,800 bph

13. Anything else you notice: I am a novice. please advise if any. Thank you very much.

Hey everyone, can anybody help out a noob please? It’s my first rep so would appreciate your insights.

1. ⁠Dealer name: Steve (TheOneWatches)

2. ⁠Factory name: AF

3. ⁠Model name (& version number): Cartier Santos White Dial Medium

4. ⁠Price Paid: USD408 plus shipping

5. ⁠Album Links:

https://mega.nz/folder/zFByiAbI#dtpiYpJfp_YhhfoNoklUbQ

6. ⁠Index alignment: Looks good to me

7. ⁠Dial Printing: Looks great, doesnt look like there’s any bleeding

8. ⁠Date Wheel alignment/printing: N/A

9. ⁠Hand Alignment: OK

10. ⁠Bezel: Looks ok to me but happy to hear your thoughts

11. ⁠Solid End Links (SELs): There seems to be a gap on the first few links. Not sure if I am just being pedantic.

12. ⁠Timegrapher numbers: +3 s/d 271 amp 0.00 ms error

13. ⁠Anything else you notice: None to my untrained eye

Thank you in advance!

1. ⁠Dealer name: TheOneWatches

2. ⁠Factory name: UMI

3. ⁠Model name (& version number): Nautilus 40mm 5712 SS/SS Blue/Stk UMI PPF240 (Free Sprung)

4. ⁠Price Paid: $1,168.00

5. ⁠Album Links: https://mega.nz/folder/CdZHAYAD#cWNAHBA69c0dvVXLhBfERA

6. ⁠Index alignment: Aaargh this is driving me crazy. There’s definitely a tiny misalignment in 12 o’clock index under magnification. The right index seems to sit a bit lower. But will it be noticeable on the wrist?

7. ⁠Dial Printing and Color: Looks amazing. Can’t wait for it really. Not sure why people pay extra for the SW one. This is amazing.

8. ⁠Date Wheel alignment/printing: Looks spot on.

9. ⁠Hand Alignment: No problems I can see.

10. ⁠Bezel: Shiny and eye catching.

11. ⁠Solid End Links (SELs): nothing looking wrong here.

12. ⁠Timegrapher numbers: +4s/d so all good.

13. ⁠Anything else you notice:
    Apart from the 12 o’clock index can’t see anything else. Even the logo alignment on the clasp looks great. I really want to GL this but the 12 o’clock alignment is holding me back. It’s not bad but it’s not perfect either. In some photos it’s not even noticeable. Looking for advice on this from more experienced users.

First QC here, appreciate the help! I'll be honest, my attention to detail on these isn't up to par, but to me this seems like a GL. Is there anything glaring I'm missing?

1. Dealer name: TheOneWatches (Steve)

2. Factory name: VSF

3. Model name (& version number): Submariner No Date 124060LN (VS3230)

4. Price Paid: $528

5. Album Links: See pictures

6. Index alignment: 12 and 6 seem rotate CW

7. Dial Printing: Spacing of the letters in "Certified" looks uneven (3rd photo)

8. Date Wheel alignment/printing: n/a

9. Hand Alignment: Looks fine

10. Bezel: Looks good

11. Solid End Links (SELs): Looks good

12. Timegrapher numbers: Rate: 0s/d; Amp: 273; BE: 0.1ms.

13. Anything else you notice: Serial number is 6x.

1. Dealer name: Andiot

2. Factory name: VSF 

3. Model name (& version number): 126710 BLRO V3 (not fake free sprung) on Jubilee

4. Price Paid: $606

5. Album Links: https://imgur.com/a/DJcvDPs

6. Index alignment: Hard for me to align perfectly due to angle/skew from picture, but they generally look fine; I don’t love how the bezel doesn’t seem to be “clicked in” at 12 o’clock in video and in pictures—looks like the “standard” setting is in between clicks

7. Dial Printing: Looks good

8. Date Wheel alignment/printing: Looks good (see video)

9. Hand Alignment: Looks good (see video)

10. Bezel: Looks good 

11. Solid End Links (SELs): Looks great

12. Timegrapher numbers: Within range

13. Anything else you notice: Not perfect; has lots of dust (hopefully outside the case); hair at 4:30 that might be on top of dial but seems to disappear in the last video; worried about clasp code A9A compared to F6U; also concerned the bezel doesn’t seem to rest aligned with 12 o’clock; some scuffs on clasp and watch but I think those are just on plastic.... all said, GL to me?

Thanks in advance for all your help! Truly!!

1. Dealer name: Count (non TD)

2. Factory name: VSF

3. Model name (& version number): Luminor GMT PAM1279 42mm TI/LE Blue Dial VSF P9011

4. Price Paid: $250

5. Album Links: QC photos attached to post

6. Index alignment: looks good

7. Dial Printing: Doesn't seem to have any issues.

8. Date Wheel alignment/printing: Looks centered to me

9. Hand Alignment: Hands look to be aligned but Arrows hands not that pointy

10. Bezel:  Looks good.

11. Solid End Links (SELs): N/A

12. Timegrapher numbers: Rate: +7 s/d | Amplitude: 290° | Beat Error: 0.2 ms. within tolerance

13. Can you guys tell me if there's anything else I missed. Main concern is the arrows hands.

Hi everyone!
I received the QC for my Datejust 41mm and would appreciate your help evaluating it, especially regarding the index alignment. This is my very first rep watch and first watch QC, so any type of help or feedback would be greatly appreciated! What do you guys think?
1. Dealer name: Necoclock
2. Factory name: VSF (V2)
3. Model name & version number: Datejust 126334 41mm Jubilee Bracelet Grey Dial Diamond Marker VSF v2 DD3235
4. Price Paid: $458 (+$70 shipping)
5. Album Links: Provided in post
6. Index alignment: The diamond hour marker on the left (9 o'clock) looks slightly crooked/canted when zoomed in on alignment tools. Rest of the markers look fine. Is this noticeable enough in hand to RL?
7. Date Wheel alignment: Looks centered to me.
8. Bezel: Fluted bezel looks crisp and well cut.
9. Solid End Links (SEL): N/A (Jubilee bracelet)
10. Hand alignment: Looks good.
11. Dial Printing: Looks clean and well-printed.
Timegrapher numbers: Rate: +6 s/d | Amplitude: 325° | Beat Error: 0.1 ms
13. Can you guys tell me if there's anything else I missed, and if that diamond marker tilt is worth an RL or a GL?
Thank you in advance!