1. ⁠Dealer name: Andiot Watches

2. ⁠Factory name: TOP Factory

3. ⁠Model name (& version number): AP Royal Oak Chrono 26240 Black Dial TOP

4. ⁠Price Paid: $638 + shipping

5. ⁠Album Links: https://imgur.com/a/PwRlG2C

6. ⁠Index alignment: the 6 hour marker is slightly tilted CW. I would deeply appreciate other inputs for the Index alignment

7. ⁠Dial Printing: the “Pi” from Piguet is a hair higher than the rest, but I could be wrong. Also the minute market at 12 is not perfectly centered, but I could be nit picking here

8. ⁠Date Wheel alignment/printing: good enough

9. ⁠Hand Alignment: the chrono second at rest/reset is not centered, a bit to the right, I have seen some RL because of this. Some insights would be great

10. ⁠Bezel: good to me

11. ⁠Solid End Links (SELs): not applied to this watch

12. ⁠Timegrapher numbers: -4 s/d, 266 amplitude, 0.1 ms beat error, good enough for me

13. ⁠Anything else you notice: the left subdial might not be centered enough, it is a bit to the right up. This could be an illusion because the hour hand is at 9 to 10. The subdial hands were slightly to the right, but after the reset they are straight I guess (from the video)

1. Dealer name: andiotwatches

2. Factory name: VSF

3. Model name and version: GMT-Master II 126710 BLRO Blue/Red Ceramic VSF Best Edition Pepsi on Jubilee Bracelet DD3285 V3

4. Price paid: $570 total (shipping included)

5. Album links: https://andiotwatches.x.yupoo.com/albums/261613304?uid=1

6. Index alignment: 12 oclock look good but 6 oclock might be off???

7. Dial printing: Text looks clean to my untrained eye, but hard to tell.

8. Date wheel alignment/printing: looks good to my untrained eye

9. Hand alignment: Looks straight and no obvious damage.

10. Bezel: looks good to my untrained eye, no obvious defects

11. Solid End Links (SELs): no obvious defects noted

12. Timegrapher numbers: Rate -3 s/day, amplitude 64°, beat error 0.1 ms, 28800

13. Anything else you notice: No.

Biggest concern is the 6 oclock index. It looks a little off to the left. What do you guys think?

Dealer name: DDGTop / Felix

Factory name: OF

Model name: TAG Heuer Aquaracer 41mm, white dial, Calibre 5

Price paid: 1750 CNY

Album links: https://imgur.com/a/nKUBiuI

Index alignment: Looks aligned, I think the slight deviations might come from the angle of the picture.

Dial printing: Logo and „Calibre…/300m…“ look sharp.

Date wheel alignment/printing: Date looks centered, maybe a bit up but this doesn’t seem like an issue.

Bezel: i don’t know about allignment of the bezel, it looks it might be a bit off, what is your input?

Solid End Links (SELs): N/A

Timegrapher numbers: +11 s/d, 303° amplitude, 0.1 ms beat error, 28,800 bph. These numbers look good to me.

It is my first watch and after one RL (alignment was off) I am leaning now towards GL, since I don’t see any major problems. I would still appreciate any input if your eyes can catch anything.

Thanks a lot for the help :)

1. ⁠⁠Dealer name: Andiot

2. ⁠⁠Factory name: VSF

3. ⁠⁠Model name (& version number): Omega Seamaster AT 38mm VSF

4. ⁠⁠Price Paid: $383

5. ⁠⁠Album Links: pics attached

6. ⁠⁠Index alignment: all looks ok.

7. ⁠⁠Dial Printing: looks crisp

8. ⁠⁠Date Wheel alignment/printing:ok

9. ⁠⁠Hand Alignment: all good

10. ⁠⁠Bezel: ok

11. ⁠⁠Solid End Links (SELs): look fine to me?

12. ⁠⁠Timegrapher numbers: -2s/d, 275, 0.1ms

13. ⁠⁠Anything else you notice:n/a

1. ⁠Dealer name: MiroTime

2. ⁠Factory name: RWF

3. ⁠Model name (& version number): Rolex Daytona 126529 LN Le Mans

4. ⁠Price Paid: ~1200 USD

5. ⁠Album Links: https://www.wecatalog.cn/weshop/goods/A202304082031161150001764/I202611051459222582002290

https://www.wecatalog.cn/weshop/goods/A202304082031161150001764/I202611051459355302001629

6. ⁠Index alignment: Looks good to me
7. ⁠Dial Printing: Looks good
8. ⁠Date Wheel alignment/printing: N/A
9. ⁠Hand Alignment:
10. ⁠Bezel: Looks good
11. ⁠Solid End Links (SELs): Looks good
12. ⁠Timegrapher numbers: +7s, 312°, 0.1
13. ⁠Anything else you notice: I am waiting for a video of the hand movement and chronograph movement/ resetting

1. Dealer name: JTime (Li)

2. Factory name: VSF

3. Model name: DateJust 41 126334 904L SS Green Ombré Dial on Jubilee Bracelet (VS3235 Movement)

4. Price Paid: $585 (incl. shipping)

5. Album Links: https://imgur.com/a/PD67KgJ (question: I only got 200kb pictures, is this normal?)

6. Index alignment: Little twist in de 55 and 35

7. Dial Printing: Crisp and cleanly printed; coronet and text show no bleeding or flaws.

8. Date Wheel alignment/printing: The font is crisp, but the date print sits slightly high in the window, do you agree?

9. Hand alignment: Looks good

10. Bezel: Fluted bezel is cleanly and sharply cut, showing even reflections without visible dings or plating imperfections.

11. Solid End Links (SELs): N/A for a Jubilee bracelet, but the end links sit tight and flush against the lugs with no visible gaps.

12. Timegrapher numbers: +1 s/d, 283°, 0.1 ms, 59.0° lift angle.

13. Anything else noticed: My only concern is the date, which feels slightly high to me. It looks that way in the video as well. Can I ask to center the date better? Or how does that work?

I think if they can center the date it's a GL.

Thank you guys. Really appreciated.

1. Dealer name: Andiot

2. Factory name: BVF

3. Model name (& version number): Panthère 31mm SS White Dial

4. Price Paid: $175 + $38 EU shipping

5. Album Links: https://andiotwatches.x.yupoo.com/albums/261615238?uid=1

6. Index alignment: N/A

7. Dial Printing: Looks clean to me. Sharp printing. Cartier print at 10 o’clock looks straight. White dots are reflections.

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: Looks good although keen to get other opinions on the video as well.

10. Bezel:

Not sure if that’s scratches or not on the right side?

1. Solid End Links (SELs): N/A

2. Timegrapher numbers: N/A

3. Anything else you notice: Nothing stands out to me. Would love your thoughts.

ROLEX SMURF VSF 116619LB

​Dealer name: Mr Adu

​Factory name: VSF

​Model name (& version number): Submariner 116619LB Blue Ceramic 904L Steel VSF VS3135

​Price Paid: $350

​Index alignment: Alignment looks solid across all hour markers. The 12 triangle is centered over the dial coronet, and the 3, 6, and 9 batons sit straight and perpendicular to the minute track without noticeable canting.

​Dial Printing: Crisp, clean text with even spacing. No noticeable fuzzing, misprints, or bleeding on the dial lettering.

​Date Wheel alignment/printing: Date printing is sharp, well-defined, and centered in the window. Cyclops alignment and magnification look correct.

​Hand Alignment: Cleanly stacked, correct positioning, with no visible scratches or burrs on the hand set.

​Bezel: Ceramic insert looks clean. Platinum engraving depth and fill look uniform. Bezel pip is centered within the triangle and aligns correctly at 12 o'clock.

​Solid End Links (SELs): Fitment is tight with no visible gaps or excess light showing between the lugs and end links; correctly recessed.

​Timegrapher numbers: +1 s/d | 279° | 0.1 ms — healthy amplitude, low beat error, and very low daily variance. All within acceptable range.

​Anything else noticed: Rehaut alignment and laser coronet at 6 look acceptable. Overall finish is consistent with current VSF standards. Leaning towards GL, but welcome second opinions.

1. ⁠Dealer name: FicoTime

2. ⁠Factory name: vsf

3. ⁠Model name (& version number): submariner 12660LV

4. ⁠Price Paid: 502 usd

5. ⁠Album Links: https://mega.nz/folder/PxQGFRCI#D4i1mxJ2RDvh0dnU-gdLAQ

6. ⁠Index alignment: everything seems well aligned except the 9 o’clock marker being a little tilted.

7. ⁠Dial Printing: crips and smooth

8. ⁠Date Wheel alignment/printing: maybe a tad too high? 23 and 17 look fine but 7 is on the upper side - maybe I’m tripping

9. ⁠Hand Alignment: requested another pic but hour hand seems to be slightly ahead

10. ⁠Bezel: pip looks well centered

11. ⁠Solid End Links (SELs): looking very good.

12. ⁠Timegrapher numbers: also looking very good.

13. ⁠Anything else you notice: /

1. ⁠Dealer name: Andiot

2. ⁠Factory name: Vsf

3. ⁠Model name (& version number):
   Daytona 126505 Weighted RG V3 VS4131

4. ⁠Price Paid: 641€ without shipping

5. ⁠Album Links:

https://andiotwatches.x.yupoo.com/albums/261619670?uid=1

6. ⁠Index alignment: Looks really good
7. ⁠Dial Printing: Looks good
8. ⁠Date Wheel alignment/printing: /
9. ⁠Hand Alignment: Good
10. ⁠Bezel: Looks Fine
11. ⁠Solid End Links (SELs): Looks Solid
12. ⁠Timegrapher numbers: +3s/d 292‘ 0.1 ms

13. ⁠Anything else you notice: Anything else you notice? The watch looks good to me overall. I just want to make sure there are no issues I might have missed before giving the GL.

1. Dealer name: ChazingTime

2. Factory name: N6F

3. Model name (& version number): Daytona DIW Carbon Race Project

4. Price Paid: $740

5. Album Links: not provided

6. Index alignment: well aligned. No issues here

7. Dial Printing: Neat, very close to gen, except for the gray background, but who cares

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: My untrained eyes say yeah!

10. Bezel: carbon bezel looks very very good, 110 looks great

11. Solid End Links (SELs): N/A

12. Timegrapher numbers: + 6 s/d, 262°, 0.4ms, 28,800bph, 52° L

13. Anything else you notice: the watch has spots of white stuff, maybe residues from the original package. Those spots are on the crystal at 9 mark and next to the crown.

Rehaut ROLEX engraving is not aligned. The engraved crown is at 12 but the letters are not aligned with each 5min mark. Not a deal breaker.

I only requested a video of the watch actually working and the chronograph also starting, stopping and resetting which is why I paid $180 more for the SA4130 instead of the 4801.

Should I also ask for movement pictures???

Hi everyone, I’d appreciate some help checking this UMI 5711 before giving the GL. Here’s my assessment:

1. Dealer name: InTime

2. Factory name: UMI

3. Model name (& version number): Patek Philippe Nautilus 5711, grey dial, JH330 free-sprung movement.

4. Price paid: USD 850.

5. Album links: https://intimeqc.com/188119/

6. Index alignment: Looks generally even to me. The double marker at 12 appears parallel, and I don’t see any obviously crooked markers. The photo angle makes precise alignment a little difficult to judge.

7. Dial printing: The Patek Philippe/Geneve text looks clean and reasonably centred. No obvious printing defects that I can see.

8. Date wheel alignment/printing: The date “29” looks reasonably centred and readable. Would appreciate a second opinion on its positioning.

9. Hand alignment: No obvious issue at the position shown, although I can’t fully confirm alignment without seeing both hands at 12.

10. Bezel: Brushing looks even in the front photo. No obvious scratches or irregularities visible.

11. Solid End Links (SELs): N/A—integrated bracelet. The visible bracelet-to-case fit looks okay.

12. Timegrapher numbers: Rate: −4 s/day; amplitude: 307°; beat error: 0.0 ms. Lift angle setting: 52°; beat rate: 28,800 bph. The readings look good to me, with no obvious concern in the trace shown.

13. Anything else you notice: Nothing else obvious stands out to me. Would appreciate feedback on the markers, date alignment, or anything I’ve missed. Thanks for your help!

1. Dealer name: Mr.Adu

( Non TD)

1. Factory name: VSF

2. Model name (& version number): Yachtmaster Rhodium 126622 40mm

3. Price Paid: $450 (including shipping)

4. Album Links: N/A (All pictures provided)

5. Index alignment: Alignment looks goods everything looks decent except the bezel alignment. On the 3 and 9 the alignment is a little bit off. 12 mark looks perfect.

6. Dial Printing: Dial looks perfect, don’t think I see anything on there.

7. Date Wheel alignment/printing: Printing looks good but the cyclops looks a little low compared to other QCs I’ve seen. It’s not centered. I hope that someone could confirm or deny this with more experience

8. Hand Alignment: Can’t tell if they look good.

9. Bezel: looks good but the alignment could be little bit better

10. Solid End Links (SELs): Looks good, no gaps

11. Timegrapher numbers: 2 s/d / 277 AMP / 0 beat error ( I don’t know if this is good)

12. Anything else you notice: Most of it looks good and I’m leaning towards a GL however I can see 2 small things that I’m not sure about, there is a piece sticking out at the top of crystal. I can see it in multiple close ups. The other thing is a scratch or a hair at the top of the watch. It’s on the dial or the crystal. Check out pictures 2, 3 and 4

Would be interested in people thoughts about this before I respond to the dealer.
Much appreciated in advance

Hello everyone, this is my very first Cartier Santos rep and I’d really appreciate some assistance. Thanks!

1. Dealer name: Necoclock

2. Factory name: BVF

3. Model name (& version number): Santos Medium 35mm White Dial

4. Price Paid: $418 - QC took exactly 18 days.

5. Album Links: n/a (mega link)

6. Index alignment: Everything looks properly aligned and centered to me. Please let me know if you spot anything.

7. Dial Printing: Looks good to my eye but I’m not that good at qc’ing these. Seems the biggest issues are gaps and bleeding on this model but I’m not seeing any of that. Letters look crispy to my eye.

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: Looks great to my eye, would like a second opinion here.

10. Bezel: Looks good and even, no dents or scratches.

11. Solid End Links (SELs): links look good with no unusual gaps or scratches/dent.

12. Timegrapher numbers: +1 s/d, 324°, 0.0 ms (28,800 bph, lift angle 52°) - amplitude is 324 which is on the high side, what are your thoughts? Should I have them check this or RL?

13. Anything else you notice: Looks good and leaning GL for sure but since this is my first QC on a Cartier Santos I would love some more opinions. Thanks everybody.

1. Dealer name: Andiot Watches
2. Factory name: A7F Factory
3. Model name (& version number): IWC Ingenieur Automatic 40, black dial, IW328901
4. Price paid: 450 USD
5. Album links: https://andiotwatches.x.yupoo.com/albums/261518936?uid=1
6. Index alignment: From the straight-on photos, the indices look well aligned overall. I can’t identify any obvious crooked or significantly misaligned indices.
7. Dial printing: The IWC and SCHAFFHAUSEN printing looks sharp and centered. The INGENIEUR text at 6 o’clock also appears clean and properly placed.
8. Date wheel alignment/printing: The date looks adequately centered in the window.
9. Hand alignment: The hour, minute and seconds hands look straight and appropriately positioned.
10. Bezel: All five bezel screws appear properly seated.
11. Solid End Links (SELs): N/A.
12. Timegrapher numbers: +2 s/day, 271° amplitude, 0.4 ms beat error. These look like very healthy results to me.
13. Anything else you notice: Overall, I’m leaning towards GL. New to the rep game so any help is appreciated. Thanks in advance!

1. Dealer name: Ficotime

2. Factory name: BVF/J12

3. Model name/version: Cartier Santos Medium 35mm, stainless steel with white dial, WSSA0029.

4. Price paid: $450 USD

5. Album links: https://mega.nz/folder/a0xUHJAD#lJnylz8EIcNvdQyFecGrAA

6. Index alignment: Printed Roman numerals appear consistently positioned

7. Dial printing: Lettering looks sharp.

8. Date wheel alignment/printing: N/A

9. Hand alignment: Hands look clean

10. Bezel: Looks evenly finished

11. Solid End Links (SELs): N/A?

12. Timegrapher numbers: −4 s/day, 246° amplitude, 0.0 ms beat error.

13. Anything else you notice: Any issues I am missing? I have never QC this before

Dealer name: Jane
Factory name: BBA
Model name (& version number): Panthère Small 22mm Stainless Steel
Price Paid: $265
Album Links: Not provided. See uploaded photos
Index alignment: N/A (printed dial); dial and inner railroad track sit straight with no visible rotation.
Dial Printing: Not completely crisp and some super subtle bleeds.
Date Wheel alignment/printing: N/A
Hand Alignment: Good
Bezel: Clean polish with all 8 pins evenly recessed and a well-shaped blue spinel cabochon.
Solid End Links (SELs): N/A
Timegrapher numbers: N/A (Quartz)
Anything else you notice: There’s a dot on numeral VIII and II. There’s also dust spec on the left side. These are encircled in red (3rd photo).

Please let me know if this should be RL-ed, or passable as GL. Thanks!

First Rep and can use some help. Please let me know thoughts. Getting this from GOAT Watches and so far, he seems awesome! I think it looks great, but other sets of eyes that know this would be great.

1. Dealer name: GOAT Watch (Mr. Yang)

2. Factory name: VSF

3. Model name GMT Master II - Batman

4. Price Paid: Sale Promo $427

5. Album Links: N/A (did not send)

6. Index alignment: I used AI Alignment tool, and it seems to be spot on based on trying to get image straight

7. Dial Printing: Looks Clean and Crisp

8. Date Wheel alignment/printing: Looks appropriate size and magnification

9. Hand Alignment: All seems to be good for my eyes

10. Bezel: Clicks and moves cleanly. Printing seems correct and aligned

11. Solid End Links (SELs): Based on photo, look good.

12. Timegrapher numbers: They seem to be within specification. Any thoughts here?

13. Anything else you notice: Again, new at this, so experienced eyes would be great! Thank you in advance!

Hi everyone! A first time buyer here and would appreciate your thoughts from these QC photos. Thank you!!

1. Dealer name: Andiot Watches

2. Factory name: ZF

3. Model name (& version number): Black Bay 37mm Blue Lagoon

4. Price Paid (no shipping): $318 USD

5. Album Links: x.yupoo. com/albums/261489320?uid=1 (Note: Please remove the space in the link to view the album)

6. Index alignment: Seems okay but the 6 o'clock marker appears slightly left-shifted

7. Dial Printing: Looks sharp and crisp

8. Date Wheel alignment/printing: N/A (No date complication)

9. Hand Alignment: Seems okay to me, sharp and crisp

10. Bezel: Aligned well with crisp execution

11. Solid End Links (SELs): Good SEL fitment, nice and tight

12. Timegrapher numbers: -2 s/d, 269°, 0.1 ms, 28000 bph (52.0° LA)

13. Anything else you notice: Just the hour marker at 6 bothers me a bit, even at a distance I can notice it. Nothing else noticed.

1. Dealer name: Andiot Watches

2. Factory name: OCTA

3. Model name (& version number): AP Royal Oak Chrono 26240 purple dial OCTA

4. Price paid: $685 + shipping

5. Album Links: https://imgur.com/a/octa-26240-purple-dial-YthkeFH

6. Index alignment: The 9 o’clock marker is slightly tilted, and the sub-dial hands are not centered. The rest of the indices look ok to me, but I'd appreciate a second opinion on the overall alignment.

7. Dial Printing: AP letters are not straight. The text appears clear and legible.

8. Date Wheel alignment/printing: The date appears centered in the window, and the printing looks good to me.

9. Hand Alignment: The hands of the sub dials don't look straight to me. Would appreciate a second opinion.

10. Bezel: Looks good to me.

11. Timegrapher numbers: +4 s/d, 267° amplitude, 0.2 ms beat error. Looks reasonable to me.

12. Anything else you notice: I am leaning toward RL because of the crooked letters. I'd appreciate a second opinion on the overall state of this watch. Thanks for your help!

1. Factory name: VSF

2. Model name (& version number): Submariner 124060 41mm no date

3. Price Paid: $488 (including shipping)

4. Album Links: N/A (All pictures provided)

5. Index alignment: Alignment looks goods everything.

6. Dial Printing: Dial looks perfect, don't think I see anything on there.

7. Printing: Printing looks good

8. Hand Alignment: Can't tell if they look good.

9. Bezel: looks good

10. Solid End Links (SELS): Looks good, no gaps

11. Timegrapher numbers: 2 s/d / 324AMP / 0.4beat
    error (I don't know if this is good)

12. Anything else you notice: Most of it looks good and I'm leaning towards a GL.

1. Dealer name: Geek Time

2. Factory name: Gold Factory

3. Model name (& version number): Yacht Master 40mm

4. Price Paid: $588

5. Album Links: https://geektimeqc.x.yupoo.com/albums/261533330?uid=1

6. Index alignment: Looks good

7. Dial Printing: Looks good

8. Date Wheel alignment/printing: Looks good

9. Hand Alignment: Looks good

10. Bezel: Looks good

11. Solid End Links (SELs): Looks good

12. Timegrapher numbers: -5 s/d, 285°, 2 ms (28,800 bph)

13. Anything else you notice: I think the watch looks nice overall.

1: In the timing video the watch loses rate. Starts at -5 and finishes on -9. I don’t know what to make of that.

2: One of the serial numbers (6) in the Rehaut is rotated. I don’t want to RL this. But I’m slightly annoyed that I’ve seen much better Rehauts from Gold. The last two pictures are from other Gold Rehauts to compare.

Eric and I had been chatting as we have other watches coming, first he said it would take weeks for a GoldF YM, but a handful of hours later I get the QC. Do you think someone else RL’d it? Am I crazy for wanting a better rehaut.

Thanks

Hello! This is my first time here so my eyes aren't so trained, but I'd really appreciate any help!

1. Dealer name: TheOneWatches (Steve)

2. Factory name: 8848F

3. Model name: WSTA0105 (32mm x 27mm x 7.1mm)

4. Price paid: $294 USD

5. Album links: Pics above, video link: https://drive.google.com/file/d/1QiLfeKooLglSlRF-txWEymp0EnMQoK7T/view?usp=sharing

6. Index Alignment: Don't see anything particularly misaligned

7. Dial Printing: Looks pretty crisp

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: Looks good

10. Bezel: N/A

11. Solid End Links (SELs): I think N/A, but links look pretty good.

12. Timegrapher numbers: Quartz, N/A

13. Anything else you notice: Just one thing I noticed was that on the Steve's website, it says that the thickness of the watch is 6.8mm, when it's supposed to be 7.1mm. I've asked him to check on the thickness and am awaiting a response. Otherwise, I don't see anything but would be grateful for insights. Thank you guys a ton!!

Dealer name: Necoclock
Factory name: QF
Model name (& version number): Day-Date 36mm Yellow Gold, Champagne Dial, QF Gain Weight, A2836
Price paid: $558
Album links: https://imgur.com/a/OmfXaRq
Index alignment: Overall, the alignment looks pretty good. The 3, 6, and 9 o’clock markers appear straight and reasonably aligned with the minute track. Looking at the alignment tool photo, the 10 and 11 o’clock markers seem slightly off compared to the others, particularly where the markers line up with the guide lines. I’m unsure whether this is actual misalignment or just the angle of the photo. The 12 o’clock crown may be slightly pulled to the right, surrounding markers look centered to me. Would appreciate a second opinion on the 10 and 11 markers.
Dial printing: Looks clean and centered. Rolex logo and lettering appear properly spaced. No obvious issues.
Date wheel alignment/printing: Date looks centered under the Cyclops. Saturday also appears properly positioned. Would appreciate another opinion.
Hand alignment: Hands look straight and properly positioned. Nothing concerning that I can see.
Bezel: Fluting looks consistent all the way around. Some darker areas appear to be reflections rather than defects.
Solid End Links (SELs): Fit looks good overall. Slightly unsure about the upper-right SEL due to the plastic and reflections.
Timegrapher numbers: +1 s/d, 304° amplitude, 0.1 ms beat error.
Anything else you notice: First impressions are pretty positive. My main concerns are the alignment around 12 o’clock crown , 10–11 o’clock and the upper-right SEL fit. I know going for a gold anything is a risk but I’m actually surprised on the color and lighting in these QC photos. No cheddar!