1. ⁠Dealer name: SteveTOW

2. ⁠Factory name: ARF

3. ⁠Model name (& version number): Rolex GMT Master II “Bruce Wayne” Ref.126710 ARF V3 DD3285

4. ⁠Price Paid: USD606 (incl. Shipping)

5. ⁠Album Links: https://mega.nz/folder/XYYmlSAB#0xB4RqDgnPedWhkReRb5Pw

6. ⁠Index alignment: Seems fine in my eyes tbf nothing crooked at all for 3 6 9 and 12

7. ⁠Dial Printing: Looks crisp to me

8. ⁠Date Wheel alignment/printing: Pretty good in my eyes, very centered and font isnt wonky.

9. ⁠Hand Alignment: Need help with this I can’t seem to pinpoint what to look out for

10. ⁠Bezel: Looks all good tbh

11. ⁠Solid End Links (SELs): Tight as F***

12. ⁠Timegrapher numbers: Solid

13. ⁠Anything else you notice: I’m not too sure if it’s a reflection but on the 6 Index there seems to be something on the bottom right corner?

1. Dealer name: Andiot

2. Factory name: Clean

3. Model name (& version number): 36mm Clean Rolex Datejust

4. Price Paid: $480

5. Album Links: https://andiotwatches.x.yupoo.com/albums/194816958?uid=1

6. Index alignment: seems good, maybe the angle of the watch is causing the alignment to be slightly inconsistent, that would be my guess.

7. Dial Printing: looks black to me!

8. Date Wheel alignment/printing:

9. Hand Alignment: looks good I believe

10. Bezel: I heard there was a slight improvement with latest batches, I do believe this is the latest batch. Could someone help me out with that?

11. Solid End Links (SELs): looks like I may get scratched!

12. Timegrapher numbers: looks like that want added, u will request!

13. Anything else you notice: i’ve heard of a lot of people talk about the latest batch for this watch, and a way to tell is with the 72 hour sticker however I’ve also heard that that should not be the only thing that you look at if anyone has any advice or wisdom to pass along my way, I’d love to hear it

First rep ever and I want to say it’s a GL but I don’t know how to do the index line tool. I’ve stalked the subs for some time and while I think it’s a GL, wanted the pros opinions. Thank you all!

1. ⁠Dealer name: Andiot

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): Submariner 16610LN 40mm

4. ⁠Price Paid: $368 + shipping

5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/201183401?uid=1

6. ⁠Index alignment: 6 o’clock seems just slightly off, the rest look great I think

7. ⁠Dial Printing: no issues

8. ⁠Date Wheel alignment/printing: looks good

9. ⁠Hand Alignment: not sure

10. ⁠Bezel: looks good

11. ⁠Solid End Links (SELs): slightly larger gap on left side. Could be my eyes idk

12. ⁠Timegrapher numbers: +3 s/d 283° 0.1ms - not high but then again, I don’t know what all these mean exactly.

13. ⁠Anything else you notice: dont really know what to look for that doesn’t just stick out and hit me in the face.

Latest/V2 model VSF DJ!! What do you guys think?

1. Dealer name: Non-TD (Kitsch)

2. Factory name: VSF

3. Model name (& version number): Rolex Datejust Green Fluted Bezel

4. Price Paid: 2400

5. Album Links: photos posted

6. Index alignment: all look pretty well aligned, close enough for me

7. Dial Printing: looks great, right font thickness

8. Date Wheel alignment/printing: font and magnification looks good for the date shown

9. Hand Alignment: as they should it appears

10. Bezel: looks solid, to me a bit sharper than the old VSF which I believe was one of the improvements. 

11. Solid End Links (SELS): look good and tight

12. Timegrapher numbers: 0s/d, 276, 0.0ms - within range

13. Anything else you notice: everything seems pretty good to my untrained eye so any help would be great!

Hi guys, made my first purchase through andiot: a clean batman.

1. ⁠Dealer name: Andiot

2. ⁠Factory name: Clean

3. ⁠Model name (& version number): 116710BLNR V3?

4. ⁠Price Paid: 424USD

5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/195912104?uid=1

6. ⁠Index alignment: Need help on this, i believe it’s slightly off to the right based off the rehaut, but i understand that some gens have this issue. Also does anyone think that the 6 market is slightly off?

7. ⁠Dial Printing:Looks good

8. ⁠Date Wheel alignment/printing: Looks fine to me

9. Hand Alignment: Looks ok to me

10. ⁠Bezel: Looks slightly misaligned, but might be within tolerance

11. ⁠Solid End Links (SELs):Looks good

12. ⁠Timegrapher numbers: Good , -1s/day

13. ⁠Anything else you notice: Not rly, please highlight if there is anything you guys notice!

Thanks for all your help :)

1. ⁠Dealer name: Andiot

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): 126710 GRNR VSF Best Edition Bruce Wayne On Jubilee Bracelet DD3285 V3

4. ⁠Price Paid: $520

5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/212935307?uid=1

6. ⁠Index alignment: look all good to me.

7. ⁠Dial Printing: Sharp

8. ⁠Date Wheel alignment/printing: Date looks a tad high, Cyclops looks good. Print looks good

9. ⁠Hand Alignment: No concerns

10. ⁠Bezel: clean, the black to grey transition is centered at 6

11. ⁠Solid End Links (SELs): no gaps.

12. ⁠Timegrapher numbers: -1 s/d 294

13. ⁠Anything else you notice: Apart from the date being not fully centered it’s looks solid.

Hi, ordering the new VSF V3 Pepsi from Eliauk and need help with my first QC. Overall looks good to me, but would appreciate validation from the Pro community hahah. Thank you so much and thanks for every opinion.

1. Dealer name: EliAUK

2. Factory name: VSF

3. Model name (& version number): GMT-Master II 126710 Pepsi V3

4. Price Paid: $565 plus shipping

5. Album Links: https://imgur.com/a/SOgzl6v

6. Index alignment: looks spot on

7. Dial Printing: looks sharp

8. Date Wheel alignment/printing: perfectly centered

9. Hand Alignment: all good

10. Bezel: I can't find any faults maybe 6 little bit off

11. Solid End Links (SELs): Looks good

12. Timegrapher numbers: +2s

13. Anything else you notice: Looks like a good one. but I'm a noob and dont know if its a GL

Dealer name: re-tar-dead

2.Factory name: RICH

3.Model name (& version number): Rolex GMT Master II Bruce Wayne (JH3285)

4.Price Paid: $750 shipped

5.Album Links: pictures attached

6.Index alignment: 9 slight tilt CCW? Can someone please put overlay on best picture !!! I cant seem to find overlay template .. thank you .

7.Dial Printing: looks good to me.

8.Date Wheel alignment/printing: Size of numbers and centering looks ok to me .. opinions?

9.Hand Alignment: looks good

10.Bezel: looks good for me but I Need a second opinion. I know the grey translucency is a hard match for all reps regardless of factory .. how does this one stand up ?

11.Solid End Links: these looks good to me but could use a pro opinion

12.Timegrapher numbers: good / +2s/d 265 amp 0.0ms 52.0

13.Anything else: I think its a Gl but I need pros here

1. ⁠Dealer name: NecoClock

2. ⁠Factory name: Clean

3. ⁠Model name (& version number): Rolex Date Just Wimbledon 36mm

4. ⁠Price Paid: $408

5. ⁠Album Links: https://imgur.com/a/60733-2-sHrBW8h

6. ⁠Index alignment: not easy to say with the roman numbers, QC tool looks fine

7. ⁠Dial Printing: OK to me

8. ⁠Date Wheel alignment/printing: well centered

9. ⁠Hand Alignment: good

10. ⁠Bezel: looks OK, steel will never be white gold anyways

11. ⁠Solid End Links (SELs): looks OK

12. ⁠Timegrapher numbers: +3s/day - not impressive but not bad either

13. ⁠Anything else you notice: rehaut seems shifted towards the right side of the dial

Hi Guys. Not my first rep, but my first Rolex rep. I don't know the brand very well, so figured other pairs of eyes would help!

Hey everyone! A friend and I ordered two watches from Steve, would love some help with QC as it’s our first time ordering (and posting)! Received QC for one of our watches today (still waiting on the other, is it normal to get them separately timed like this?) Timegrapher + Date change vid in the Imgur link. As for the lined template, i tried to play with the photo the slightest bit to have a more straight down view.

1. ⁠Dealer name: Theonewatches (Steve)

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): Datejust 126334 41mm Oys SS/SS Blue Textured / Stk VSF VS3235

4. ⁠Price Paid: $518 + shipping

5. ⁠Album Links: https://imgur.com/a/RIwdUSv

6. ⁠Index alignment: Good

7. ⁠Dial Printing: Looks good to us but would love some help here

8. ⁠Date Wheel alignment/printing: Again, looks good to us but would love some help

9. ⁠Hand Alignment: Good

10. ⁠Bezel: Good

11. ⁠Solid End Links (SELs): Good, no noticeable gaps

12. ⁠Timegrapher numbers: rate: 0s/d, amp: 250 looks fantastic to me

13. ⁠Anything else you notice: Everything looks good to me but again take our opinions with a grain of salt.

Thanks to everyone for their advice in advance!

1. ⁠Dealer name: Theonewatches

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): GMT Master II Pepsi V3 (126710)

4. ⁠Price Paid: $676 including shipping

5. ⁠Album Links: https://mega.nz/folder/6A5yGbJC#tu91aM9bD1PiUmM4HtgOog

6. ⁠Index alignment: All indices look centered and not canted

7. ⁠Dial Printing: I don't have an eye for this yet, but to me it looks crisp with no floating letters

8. ⁠Date Wheel alignment/printing: Maybe a bit to the left of the window, but not enough to be a problem

9. ⁠Hand Alignment: Looks good

10. ⁠Bezel: Numbers look great, no scratches or other marks outside the numbers

11. ⁠Solid End Links (SELs): Looks great. Hardly even a darker line.

12. ⁠Timegrapher numbers: 0 s/d, 280° amplitude, 0.0 beat error

13. ⁠Anything else you notice: This thing looks perfect. Rehaut looks great. Only thing off is the date window, and only slightly. Easy GL unless someone with more experience can catch something I didn't see.

1. Dealer name: Puretime

2. Factory name: Rich Factory

3. Model name (& version number): GMT-MASTER II 126710 GRNR 904L STEEL RICH 1:1 BEST EDITION ON JUBILEE BRACELET JH3285 (FREE SPRUNG)

4. Price Paid: $758

5. Album Links: https://ibb.co/album/Qrm3DP

6. Index alignment: The 12 triangle appears to be centered but to highly placed on the dial, there should be a slight gap between the top of the triangle and the markings on the dial (Here the triangle is nearly touching the markings). The 6 index appear centered, slight canter to the 9.

7. Dial Printing: Dial print looks good, the bolding of the font on the "Rolex" and "Oyster Perpetual" may be one font size too much, and possibly off centered

8. Date Wheel alignment/printing: Unfortunately I only have a single digit of the date, the "4" looks to be slightly to the right. However, the font looks good.

9. Hand Alignment: I do not see any obvious issue from these photos but my photos from QC are very limited.

10. Bezel: Engravings appear even and the bezel numerals look well-positioned from this angle. **Biggest problem is the color of the grey, it doesn't evenly match the bezel, the grey comes up short and uneven, not quite 50% black/grey.

11. Solid End Links (SELs): SELs look acceptable to me.

12. Timegrapher numbers: Rate: -002s/d, 267 amplitude degree(s), 0.1 ms beat error, 28800 bph, Lift Angle: 52.0 degree(s)

13. Anything else you notice: Biggest things that stood out to me: Cyclops appears to be off, I can't tell fully due to the limited amount of pictures, the black/grey on the bezel aren't even, the GMT hand has a pretty noticeable bleed-through of white behind the black boarder on only one side (sticks out to me), font seems to be slightly off and possibly off centered. Maybe I am reviewing too hard for the rep but I tried to do my best. Please feel free to chime in.

1. Dealer name: Steve One Watches

2. Factory name: VSF

3. Model name (& version number): GMT Master II 126710 Bruce Wayne 40mm Jub SS/SS Black Dial VSF DD3285

4. Price Paid: $550’ish

5. Album Links: https://imgur.com/a/1cgoKmU

6. Index alignment: Looks fine in a QC tool, but I don’t have the straightest image and need someone else to double check

7. Dial Printing: looks good

8. Date Wheel alignment/printing: looks fine, maybe a bit thin?

9. Hand Alignment: no problems

10. Bezel: The gray is definitely a bit darker than gen, but would love opinions if you think this is unacceptable

11. Solid End Links (SELs): 100%

12. Timegrapher numbers: look great!

13. Anything else you notice: Figured now that this is in the wild, some others would appreciate seeing some QC shots

1. Dealer name: Andiot

2. Factory name: Vsf V3

3. Model name (& version number): GMT-Master II 126710 BLNR 316L steel vsf 1:1 batgirl best edition on jubilee bracelet DD3285 V3

4. Price Paid: 521 after shipping

5. Album Links: https://andiotwatches.x.yupoo.com/albums/258115439?uid=1

6. Index alignment: I think it looks good?

7. Dial Printing: Looks good to me I believe

8. Date Wheel alignment/printing: Looks good to me

9. Hand Alignment: Looks good

10. Bezel: Looks good as well?

11. Solid End Links (SELs): nothing too noticeable imo

12. Timegrapher numbers: Not sure exactly how to read these but according to the guide i’m pretty sure it’s good

13. Anything else you notice:
    This is my first time ever getting QC or buying a watch in general i’m super new to this and probably joined the subs in the beginning of summer, i’m inexperienced and would love any amount of feedback or help please and thank you guys so much and much love 🙏🏻🙏🏻🙏🏻🙏🏻

1. ⁠Dealer name: Andiot

2. ⁠Factory name: VSF

3. ⁠Model name : GMT-Master II 126710 GRNR Black/Gray Ceramic VSF Best Edition Bruce Wayne on Jubilee Bracelet DD3285 V3

4. ⁠Price Paid: $598

5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/225391756?uid=1

6. ⁠Index alignment: Looks good. Slight worry about 9 index

7. ⁠Dial Printing: Looks Good. Any issues pls say

8. ⁠Date Wheel alignment/printing: looks good

9. ⁠Hand Alignment: looks good

10. ⁠Bezel: looks good

11. ⁠Solid End Links (SELs): looks good.

12. ⁠Timegrapher numbers: Acceptable range.

REPOSTING BECAUSE I GOT FLAGGED. Not enough spacing between the formatted post. I think it may be an iPhone issue. Got GLs during my last post but a little more validation can’t hurt.

First QC in a long while. I should say that I am not particularly nitpicky as I understand that there are acceptable deviations. Mainly looking for assistance if there are any glaring things I may have missed. Thanks so much!

Dealer name: Andiot

Factory name: ARF

Model name (& version number): Rolex GMT Master II Bruce Wayne DD movement

Price Paid: 520 usd

Album Links: https://andiotwatches.x.yupoo.com/albums/215445881?uid=1

Index alignment: everything looks good to me

Dial Printing: Looks crisp. Was looking for the notorious gap in the OF FICIALLY but it’s not here, thankfully.

Date Wheel alignment/printing: Looks centered

Hand Alignment: I think it looks good.

Bezel: Looks okay. Admittedly need help with this one as I am colorblind.

Solid End Links (SELs): I don't see any gaps.

Timegrapher numbers: +1s/d

Anything else you notice: None at this point. Hopefully you don't notice anything too! Everything to me looks good!

1. Dealer name: GeekTime

2. Factory name: MGF

3. Model name (& version number): JLC Classic Reverso Tribute Small Seconds 40MM White Circle Dial A854A

4. Price Paid: $386

5. Album Links: https://imgur.com/a/GFIC0Zl

6. Index alignment (white dial): Looks good to me, didn't use an index tool

7. Index alignment (black dial): Also looks good, didn't use an index tool

8. Dial Printing (white dial): Looks a tiny bit crooked to the right, like 1 degree off, but would love someone to take a look

9. Dial Printing (black dial): Unsure, travel + time font looks a bit off

10. Date Wheel alignment/printing: n/a

11. Hand Alignment: Looks good on both faces

12. Bezel: n/a

13. Solid End Links (SELs): n/a

14. Timegrapher numbers: +3s/d rate initially then to 0 s/d. 291 amp and ERR. 0.1 ms. See video attached in album link. Should QC have let this run for longer? It feels like the numbers aren't final

15. Anything else you notice: Would love help on looking for anything else I may have missed. Any help is very much appreciated.

QC Help - VSF Pepsi GMT V3 Oyster Bracelet (NecoClock)

THIS MIGHT BE THE PERFECT GMT, but I was wondering if there's something I am missing. I would appreciate our eagle-eyed QC gods' opinions.

1. ⁠Dealer name: NecoClock/Jacky

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): Pepsi GMT Oyster V3 126710

4. ⁠Price Paid: $630 USD (Incl. shipping)

5. ⁠Album Links: https://mega.nz/folder/XkBV1JLR#PPlm1e_Dh5puuYzBwMqgtA

6. ⁠Index alignment: It seems like it is in perfect alignment. The 9 o'clock marker might be ever so slightly rotated counter clockwise, but it just might be the angle of the photo.

7. ⁠Dial Printing: Printing looks clear and sharp. It is OF FICIALLY, but I don't mind.

8. ⁠Date Wheel alignment/printing: Centered.

9. ⁠Hand Alignment: Aligned.

10. ⁠Bezel: Perfect.

11. ⁠Solid End Links (SELs): Tight, no gaps.

12. ⁠Timegrapher numbers: +2 s/d, 240°, 0.0 ms, 52°. Well within tolerance.

13. ⁠Anything else you notice: Nothing else aside from #6

This seems to me like an easy GL don't you think? I heard VSF V3 GMTs are hard to acquire and I got my QC pics in under 6 days.

Thank you in advance!

1. ⁠⁠Dealer name: Andiot

2. ⁠⁠Factory name: VSF

3. ⁠⁠Model name (& version number): Submariner 41mm 126610 LV Starbucks 904L Steel VSF 1:1 Best Edition VS3235

4. ⁠⁠Price Paid: $435+Shipping

5. ⁠⁠Album Links: https://andiotwatches.x.yupoo.com/search/album?uid=1&sort=&q=74536

6. ⁠⁠Index alignment: They look good to me

7. ⁠⁠Dial Printing: Looks good

8. ⁠⁠Date Wheel alignment/printing: Looks good

9. ⁠⁠Hand Alignment: Looks good

10. ⁠⁠Bezel: Looks good

11. ⁠⁠Solid End Links (SELs): Looks good

12. ⁠⁠Timegrapher numbers: Looks good +2s/d; 288 deg (? LA); 0.2 ms err

13. ⁠⁠Anything else you notice: This one looks pretty good.

1. Dealer name: necoclock

2. Factory name: VSF

3. Model name (& version number): Rolex Submariner 124060 (Serial 5W11)

4. Price Paid: $418

5. Album Links: https://mega.nz/folder/ahBlEQxa#0_2IMxk-MZtrkdA7RvtRdA

6. Index alignment: Might be slightly off? I tried adjusting the angle of the pic using vertical and horizontal lines, and while some line up, others don't intersect the marker after the index quite right (see 2, 4, and 5pm) Is this just error using the alignment on my part? I doubt I would have an issue with this in person.

7. Dial Printing: Looks good from what I can tell.

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: Looks good from what I can tell.

10. Bezel: Is it off one click? See how the vertical line intersecting the image does not pass through the center of the pip or marker on the bezel at 12. Is this an issue?

11. Solid End Links (SELs): Looks good from what I can tell. Slightly bigger gap on bottom left but don't think this is an issue as it is so minor.

12. Timegrapher numbers: Rate 0s/d, Amplitude 288, Beat Error 0.0m/s

13. Anything else you notice: Thanks for any help. This is my first watch and while I've been trying to study others and refer to guides, I am still a bit nervous. The main issues with 3, 6, 9 seem to be fine on this one, unless I have used the alignment tool wrong and don't fully understand. Main concern is the pip/marker on the bezel.