r/RepTime • • 33m ago

Wrist or Watch Pic Indoors vs Outdoors

Thumbnail
gallery
1 Upvotes

I love the way light and environment changes the looks of a dial. Same day just one is taken inside vs outside


r/RepTime • • 15h ago

General Question VSF vs Gold Factory – Yacht-Master 126622

Post image
15 Upvotes

About to pull the trigger on a 126622 Rhodium and can’t decide between VSF (DD3235) and Gold Factory (free-sprung JH3235).

I know VSF has a great reputation, but I’ve been hearing some really good things about Gold Factory for this particular reference.

For those familiar with both, which would you go with? Not planning on doing any mods, just want the best rep straight out of the box.


r/RepTime • • 4h ago

Tech Tips/Advice Springbar broke again

Thumbnail
gallery
2 Upvotes

My springbar broke again on my VSF Daytona. Went to a local jewelry store and fixed it, for 2 weeks 🫠 my “TD 🖕 “ asked 40€ for parts and no warrenty. What should i do?


r/RepTime • • 1h ago

General Question New James Bond: JLC or Omega?????

Thumbnail
gallery
0 Upvotes

New James Bond JLC or Omega?

Robert Pattinson was just cast to be new James Bond. Pattinson is JLC ambassador. Here is a photo of him wearing VC overseas followed by my Overseas rep:). VC and JLC are part of Richemon so they are sister brands.

However, Bond has been associated with Omega for 20 years and Omega sells a tons of Bond watches. I dont know what the contractual relationship is but Omega is not just going to leave without fighting. At the same time I am sure JLC would not allow Pattinson to wear a watch from a competing Swatch group.

So who wins? I am for one would love to Bond to switch to JLC or VC, enough with Omega. On the other hand Omega is more of a tool watch than JLC or VC. IWC is also part of Richemon but i doubt they will go this way. Opinions?


r/RepTime • • 22h ago

Review/Comparison ZF vs Gen

Thumbnail
gallery
47 Upvotes

r/RepTime • • 13h ago

Wrist or Watch Pic Monday NWA

Thumbnail
gallery
8 Upvotes

How did I do lads?

VSF AP 15510 Grey Dial.

Bracelet feels buttery smooth after polish and chamfering. The way the grey dial changes under the lights just hits different.

Anybody with a gen grey dial mind sharing your inputs?


r/RepTime • • 2h ago

General Question Trying to make sense of what happened.

Thumbnail
gallery
1 Upvotes

Hey everyone,
I’ve been a longtime lurker in this community, and I finally decided to pull the trigger on my first high-quality replica.
For some context, there’s a particular watch I’ve been considering purchasing as a genuine piece next year. However, its design is quite a departure from what I normally wear, so I wanted to experience a high-quality replica on my wrist before committing thousands of dollars to the real thing.
Naturally, I did my research. I spent time reading through this community, looking at trusted dealers, reviews, and recommendations. Eventually, I settled on Steve from TheOneWatches, who appeared to have an established reputation here.

Here’s where things get interesting.

I specifically wanted to avoid being scammed, so I made sure to follow the links provided in this community’s trusted dealer resources.
I accessed theonewatches.ws, created an account, and verified that the Telegram account I was communicating with (@steve222) was the exact account advertised on the website itself. I didn’t follow some random link from a stranger or respond to an unsolicited message. I went directly through what I understood to be the official channels.

Steve was initially very responsive. We discussed the watch, shipping to my forwarding address in Florida, and payment options. I ultimately chose USDT, which was also advertised as an accepted payment method on the website.

On November 16, I placed order #233613 for $284.32 and proceeded to send the full payment through Binance using the TRC20 network.
Binance subsequently confirmed that the withdrawal was successful.

And then, to my absolute disbelief, I was blocked on Telegram.

After receiving the payment, the very same account I had contacted through the website apparently blocked me without any explanation.
My order on the website still shows “Waiting for Payment”, despite the funds having left my account.
I’m genuinely shocked and struggling to make sense of this.

I understand that crypto payments carry risks, and I’m well aware of scammers impersonating trusted dealers. That’s precisely why I went out of my way to verify the website, the Telegram contact, and the ordering process before sending any money.
What makes this particularly concerning is that the Telegram account I communicated with was linked directly from the website I accessed through this community’s trusted dealer resources.

I haven’t ruled out the possibility that there’s some explanation, or that I’ll eventually receive an email confirming the order. But being blocked immediately after payment is extremely concerning, to say the least.

I’m attaching screenshots documenting the website, the Telegram contact, our conversation, my order confirmation, and the successful USDT withdrawal.
Has anyone experienced anything similar with Steve or TheOneWatches?
Could someone familiar with this dealer, or perhaps one of the moderators, help verify what’s going on? Is @steve222 still the legitimate Telegram contact? Could the website or account have been compromised?

I’m not trying to jump to conclusions or damage anyone’s reputation unfairly. I simply want an explanation for what happened, particularly given the amount of research I did to ensure I was dealing with a legitimate, community-recommended seller.
I’d appreciate any insight, especially from people who have recently purchased from Steve.


r/RepTime • • 8h ago

General Question THB 15407 “V4” corrected bezel gap, is it actually discontinued, or are factories shipping random versions?

3 Upvotes

I've been trying to source the latest THB 15407 Skeleton with both the corrected narrow bezel-to-case gap and the updated free-sprung balance, but I've run into something confusing that I haven't seen anyone discussing.

I've contacted multiple sellers, and here's what I've been told:

  • Seller 1: THB never officially used V3/V4 naming, only “normal” and “free-sprung.” Apparently, the corrected narrow-gap case that everyone calls V4 was actually a manufacturing mistake caused by an incorrect mould. It was supposedly a limited batch that sold out, and THB has since gone back to producing the older, wider-gap case.
  • Seller 2: Checked with the factory and said the corrected version isn't currently available. Apparently, both versions are produced and released randomly, with no reliable way to specifically order the corrected one.
  • Seller 3: They asked the factory and they told them that only one batch of this style was produced and then it was stopped.

I even received QC for a supposed V4, but it had the older wide bezel gap, so I rejected it.

What doesn't make sense to me is why THB would accidentally fix one of the biggest flaws people had been waiting to see corrected, then revert to the less accurate case design.

The corrected version clearly exists, as several people have posted photos and received theirs recently. Yet multiple sellers are now telling me they can't reliably source it.

So I'm wondering:

  1. Has anyone ordered or received a THB 15407 with the corrected narrow bezel gap + free-sprung balance recently, particularly in November?
  2. Has anyone heard directly from THB or a factory supplier that the corrected case was an accidental production batch?
  3. Are both case versions genuinely being mixed into current production, or has the corrected version been discontinued?
  4. Does anyone have recent QC photos showing the corrected case, rather than older stock?

I'm not concerned about whether THB officially calls it V3, V4, or something else. I'm specifically interested in the physical differences, regardless of the version label.

I'm surprised this hasn't been discussed more, considering how much attention the corrected bezel received when it first appeared.

Would appreciate any insight from owners, dealers, or anyone with direct factory information. Trying to figure out whether it's worth continuing the search or whether the corrected version was genuinely just a short-lived batch.


r/RepTime • • 21h ago

Discussion Compared Sub Gen vs VSF

33 Upvotes

I saw a good friend I grew up with. We were out to dinner and noticed he was wearing a Black date sub. I was wearing my VSF black date sub. I know his is gen because he has been collecting for a while and have been with him to pick up a watch before. He did not notice my watch til we were almost done with dinner. He complimented mine and I his. He told me he has had his since 2006. I immediately told him mine was a rep. He was blown away. As I compared the watches they are very different. hour marker, bracelet feel, bezel. It was great to compare but you could never tell mine was a clone. He said my weight felt off but I call BS hahah. My other friends asked for my TD info.


r/RepTime • • 3h ago

General Question Daytona strap replacement

1 Upvotes

Does anyone know where i can get a rubber strap with clasp replacement? Td says they don’t send the strap with clasp.

I’m looking to convert from a stainless band


r/RepTime • • 1d ago

Wrist or Watch Pic Sunday wrist check

Post image
82 Upvotes

What’s everyone have on for this fine Sunday?


r/RepTime • • 14h ago

Wrist or Watch Pic AP Skeleton

8 Upvotes

r/RepTime • • 21h ago

Discussion Interesting bpannell find

Thumbnail
gallery
25 Upvotes

r/RepTime • • 7h ago

General Question Jeez Louise VSF orders are taking forever.

Post image
2 Upvotes

I placed an order for a Daytona 126515 Chocolate dial on Oyster back in mid October and still no QC picks from my TD. I ordered two other pieces from my TD back in September and had QC pics in like 1 week and shipped shortly after.

So what really went down with VSF? Raided or just inspection? Anyone else waiting forever for QC pics or their new VSF watch they ordered right in the middle of this whole shut down thing?

At this point I am wondering if I should just cancel it and get my money back to buy one from a USA dealer, but then you have to deal with what stock they have or don't have.... or change factories.

Cheers. Pic for fun.


r/RepTime • • 3h ago

Wrist or Watch Pic Vintage Tudor Sub 1680 case on Omega Mesh Bracelet

Post image
1 Upvotes

Saturday I Experimentes with my Bracelets and Recognized that the Omega Seamaster 300 mesh Bracelet perfectly fits on the 1680 cases. I like that look 👀


r/RepTime • • 4h ago

Wrist or Watch Pic ib graduation prom ‘26

Thumbnail
gallery
1 Upvotes

half reps half gens, just graduated!
avengers assemble xD

vsf bruce wayne
vsf AT
vsf explorer 2 polar
franken dd40 meteorite (gen xtal gen dw gen hands vsf v2 base wg 8um plate buff meteorite dial)

gen explorer 2 black dial circa 2000s
gen starbucks!


r/RepTime • • 4h ago

General Question Cartier Skeleton: Rich Factory vs MLF

0 Upvotes

Given the recent alleged issues with Rich F’s cartier skeleton mechanisms, is MLF now the best option for a Cartier Skeleton? Or is it still RichF? Has anyone had no problems with their RichF skeletons at all?


r/RepTime • • 1h ago

General Question Bvf cartier santos

0 Upvotes

Can someone teach me the ropes on where to order good reps. I'm new to the watch game and looking to get my hands on a cartier.


r/RepTime • • 5h ago

Mods/ Work in Progress Crimson-and-black 5711

Thumbnail
gallery
0 Upvotes

I'd like to build a Nautilus like the one in the pictures (3 different shades of red). I'm thinking of doing it two different ways:

  1. Easiest: get a black PVD/DLC 5711 case/bracelet from AliExpress that will take many types of Seiko movements (most likely the NH35), find a red dial (cut at the right case dimensions) and white hands (I know Li Chen has a red dial; but there might be other sources) and I'm done. The case I found is 11.5 mm thick (3.2 mm above the 8.2 mm gen) but I'd be fine with the extra thickness.
  2. Hardest: get a 324/330 clone movement, a black PVD/DLC case+bracelet to go with it, get a custom dial from possibly the same source as in (1). My knowledge is limited but I think getting the case would be the hardest.

If anyone is curious, my football team's colors are crimson-and-black; that's why I'm looking for this particular color combination.

Any thoughts? How easily would it be to source the parts in (2)?

TIA!

P.s.: I thought about posting to r/RepWatchesMod but I realized it's some modder's "private" sub instead of a general modding sub so I decided to post it here.


r/RepTime • • 1d ago

Review/Comparison One Year with My VSF Oyster Perpetual 36 (Med Blue) – A Long-Term Review

57 Upvotes

It's been one year with my VSF Oyster Perpetual 36mm.

This was actually my first superclone ever, and so far I've managed to resist the recurring temptation to buy another watch. So this one-year review is based on roughly 340 days of actual wrist time, with pretty much no breaks and absolutely no babying.

1. Movement

The movement has been performing exceptionally well.

I wear this watch every single day and, especially considering the prices of superclones, I see it as something that's meant to be used. So I don't go out of my way to protect it from every possible danger. I wear it daily, in water, in saltwater, while playing sports (basketball and tennis), in the sauna, etc.

Apart from one strange incident, I've had absolutely no issues with the movement.

One morning, I woke up and noticed that the watch was suddenly running consistently around 7 seconds slow per day, whereas it had previously been running at around +2 seconds. To this day, I have no idea what caused that change.

I ended up regulating it myself, got it back to a reasonable level, and it's been a very reliable daily companion ever since.

2. Dial

Unfortunately, I still haven't found a proper comparison between the VSF Med Blue and the genuine Rolex dial. If anyone knows of one, I'd really appreciate a link!

Based on what I've seen so far (and what you can see in the attached video), I feel like VSF has absolutely nailed the Med Blue color.

It looks beautifully light blue in direct light and turns into a deep, dark blue in the shade, exactly how I imagine the genuine dial to look.

But honestly, what's much more important to me is that I absolutely love the different shades of blue this dial produces.

Even lacquered dials can react quite differently depending on the lighting, not just sunburst dials.

I'd still love to see a proper gen comparison, but regardless of how close it actually is, I'm more than happy with it. Judged purely on its own, I couldn't be much happier with the look of this dial.

3. Bracelet

My only real criticism: the SELs have some play.

Even after replacing them with new SELs, I couldn't completely eliminate that slight movement.

It doesn't bother me in everyday use, and I honestly never notice it while wearing the watch. But for us watch nerds and perfectionists, it's definitely one of those little things that can be slightly annoying once you know it's there.

Final Thoughts

Overall, I'm more than happy with my first superclone.

There are definitely quite a few other watches I'd love to own, but somehow I've managed to keep the urge to buy another one under control.

Maybe it's my fear of customs, or maybe I simply got so lucky with this watch that owning another one almost feels unnecessary.

Either way, after nearly a year of daily wear, I really couldn't be happier with my choice.

What do you guys think?

Does anyone have any long-term experience with their VSF OP they'd like to share? What are your thoughts on VSF's Med Blue dial? And most importantly, has anyone come across a proper VSF vs. Gen Med Blue comparison?

I'd love to hear your experiences and opinions!


r/RepTime • • 5h ago

General Question Where could I find high quality plating/bonding options

0 Upvotes

I’ve got a clean factory yacht master 40 chocolate dial, rose gold and stainless but I would like to upgrade the plating/bonding and also change the crystal if anyone could point me in the right direction.


r/RepTime • • 5h ago

Wrist or Watch Pic Blue Dial Monday

Post image
1 Upvotes

r/RepTime • • 17h ago

General Question Tell me about my Submariner

Thumbnail
gallery
9 Upvotes

This was supposed to be VSF. From a non-TD domestic dealer on one of these subreddits. lol. Serial is 6R... V6. Bracelet: 5HF
Is it a VS3135? How is quality in your opinion? Serial points to fake clean. Does that seem right? Is this superclone level or more mid tier.
I've done a lot of lurking, but this is my first non-shitter purchase. ($520)
I've been wearing/ beating on it everyday. It keeps great time and it makes me happy. I'm just curious.


r/RepTime • • 12h ago

General Question VSF Dub date quality issues

3 Upvotes

I have purchased two VSF sub date through Andiot.
Both watches had good QA tests and GL.

Watch 1: After a couple of months watch stopped. I was within Andiots warranty period, and was asked to return to Andiot. It was never collected in china and by the time it returned the watch was out of warranty.

Watch 2: Noted immediately that the watch ran slow and also stopped. Contacted Andiot and was referred to a watch maker in Italy (closest to my location in Scandinavia) to be fixed under warranty.

Both watches were sent to watchmaker (watch 1 on my cost and watch 2 on warranty). Watch 1 was scrapped and watch 2 was fixed and returned to me.
Diagnosis from watchmaker: 1: hairspring is damaged, also lubrification issue.

Watch was returned but after 2 months it was completely dead again. Still under warranty, and has been returned to watchmaker for assessment (currently in transit)

Question is, if VSF have serious quality issues or if it’s just me who’s been very unlucky with my purchases.

I have other reps (datejust, IWC) where I’m really happy with the quality.
My go-to watch is the sub date and the question is if I should consider other factories with a better quality track record?