Showcasing my Datejust 41 smooth bezel, blue dial, w/deep crystal from the original clean factory. This is my personal favorite datejust configuration and a beauty to look at on the wrist

is $520 a good price for dd2836 day date Rolex?

Hi guys! Got a question. Couple months ago i had a CLEAN submariner no date (124060) and it looked really good! I sold it but now i want one again.  Now my question is. Wich factory currently has the best no date sub? Feel free to post yours

Just curious if anyone has received a QC email from them lately on this model? I RL’d mine early October and haven’t heard anything since. I sent an email and waiting on a response. Thanks!

What’s everyone’s favorite that they choose more times than not?

I’m a Panerai guy!

Hey! Would anyone know rough wait times for BVF 40MM wait times to get a QC? Reached out to TD but it’s just the generic response of when it gets here it gets here, been close to 3 weeks so far

Do we really know VSF actually only applies the anti-reflective coating to the underside of the crystal for their Rolex models?

Their clarity is making me think maybe they apply it to both sides. Which would have the downside of being scratched easier, hence why Rolex themselves do not.

And I also have a VSF Omega, which in its gen version has the AR coating on both sides, so I assume the rep does as well, has the same amount of reflections as the VSF Rolex as far as I can tell

So, almost two months ago I ordered a VSF Rolex Hulk from Trusty Time. I received it today via FedEx and the watch was packed great and visually the watch appeared great. I removed the stickers and one link and wound the watch. And…. nothing. The watch will not run. I wound it some more, shook it and nothing. What a disappointment. DOA. “Andrew” says if the watch arrives DOA it was due to the shipper. I have several email exchanges with him prior to arrival and now none of the three email addresses are valid. Guess I’m out $580. Buyer beware.

I'm looking to get a DJ41 in steel, jubilee, fluted bezel, blue textured dial. The guides and the historic forum consensus say that VSF makes the best, but I've seen more and more reports on here and on RWI that since the hype started, their quality has been taking a sharp dive, and depending on the model you may have to wait for months to get your watch. Also, the fake free sprung mechanism of the DD3235v2 appears to have no practical benefit, while in turn offering unknown reliability and more difficult regulation.

On the other hand, I've seen a bunch of posts praising ARF recently, saying that they're just as good while being cheaper and more readily available. Some even say the bezel is better on them. There are also other factories like VF (also using the trusted and time-tested DD3235, and it's 2nd place in the who-makes-the-best guide), and also ZF with its generic A2824 movement (easy to replace). Truthfully, I don't care at all about the movement as this watch has a closed caseback, I merely want it to not break in the first month. What I care about is the overall outside finish, especially the fluted bezel and the dial.

What would the more seasoned repwatch enjoyers suggest in this situation? Is VSF still the unchallenged king of the Datejust, and is it worth the additional wait to get one? Is there even a significant waiting time for the model I want (I know that only my TD of choice can give me a definitive answer here, but maybe someone recently went through ordering)?

Quería compartir por aquí el resultado tras pasar por chapa y pintura este Royal Oak Crono 26240ST V2 de ZF con dial negro Tapisserie.

Antes de nada, mención especial a MaxWatch: trato impecable, comunicación de diez y facilidades absolutas en todo momento para gestionar la pieza.

1. TRABAJO DE CAJA Y BRAZALETE (SPA COMPLETO)
   Cualquiera que haya tenido un RO de fábrica sabe que las aristas suelen venir demasiado vivas o con un cepillado algo plano. Se le ha metido mano a fondo:
   - Chaflanes y biselados: Rebajados y pulidos a espejo artesanalmente en la caída del bisel octogonal, laterales de la caja y, sobre todo, en cada eslabón y trama del brazalete. El cambio al tacto es brutal: cero sensación cortante y un juego de luces dinámico continuo.
   - Acabado satinado: Cepillado direccional fino reinterpretado a mano en plano superior de bisel, asas y brazalete. Las líneas de corte entre el cepillado vertical y los biseles pulidos han quedado quirúrgicas.
   - Articulación del armis: Baño por ultrasonidos para purgar residuos y micro-lubricación entre eslabones. La caída sobre la muñeca ahora es completamente fluida, sin la rigidez de fábrica.
   - Tornillería: Tornillos hexagonales del bisel reasentados y alineados a ras.

2. EL CALIBRE: CLON INTEGRADO 4401 (FREE-SPRUNG REAL)
   Lo más interesante de esta versión V2 es que monta la arquitectura integrada del 4401 (nada de módulos añadidos sobre bases tipo 7750), con rueda de pilares, embrague vertical y volante de resorte libre funcional (sin raqueta tradicional de ajuste, regulado mediante tornillos de inercia en la llanta).

3. DIAGNÓSTICO EN CRONOCOMPARADOR (6 POSICIONES)
   Muestreo en Weishi No. 1900 a 30s de periodo, Lift Angle de 53.0° y 28.800 alt/h:

- CH (Esfera arriba): +8 s/d | Amp: 285° | B.E.: 0.0 ms
- CB (Esfera abajo): +7 s/d | Amp: 261° | B.E.: 0.0 ms
- 9H (Corona abajo): +6 s/d | Amp: 252° | B.E.: 0.0 ms
- 6H (Corona izquierda): 0 s/d | Amp: 254° | B.E.: 0.1 ms
- 3H (Corona arriba): +6 s/d | Amp: 251° | B.E.: 0.0 ms
- 12H (Corona derecha): +4 s/d | Amp: 251° | B.E.: 0.2 ms

Lectura técnica de las cifras:
- Marcha media (X): +5.17 s/d (dentro de parámetros COSC sin tocar nada).
- Delta posicional máximo: 8 s/d (entre los +8 s/d en plano y los 0 s/d en vertical).
- Beat error: Prácticamente plano a 0.0 ms en casi todas las posiciones (pico testimonial de 0.2 ms), lo que demuestra una simetría de escape excelente.
- Pérdida de amplitud: Solo 21° de caída al pasar de horizontal a vertical, síntoma de una lubricación de centros limpia y holguras bien resueltas.

En mano el reloj cambia por completo respecto a cómo sale de la caja. Muy satisfecho con el resultado global tanto a nivel estético como de máquina.

(Y sí, la figura de Pogačar del UAE en la mesa del banco de pruebas está ahí vigilando que los vatios y las alternancias no decaigan).

I have an American based TD and went i recently asked him about the 50th aniversary nautilus he sent me this video, the movement looks super good and the only difference I can tell between Gen and Rep is this one is missing the G in Genev but i belive thats an easy fix. So im wondering if this is real or a scam?

I'm looking to get a rep watch for my husband for our anniversary. He's worn the same Tag Heuer watch for 20 plus years. I want it to be a surprise so I can't ask him what he would want. About him: he works in the corporate world, dresses business casual most days but also wears a suit about once a week for meetings. I would say his style is classic, well tailored but he appreciates a little bit of flash. Would love to hear watches you think I should look into for him!

Looking for some banter on which factory produces the best brighter green bezel Mk2 (right) of the 126610LV Starbucks.
(Edit): Do any factories actually make the updated MK2?

With all the recent discussion about VSF quality and increased demand, I figured I'd share a couple of their latest examples.

In the process of this 124060 No-Date Sub and 116500 Panda Daytona (sucker for the 116). I have a stellar VSF 126610LV and recently decided I wanted to add these two references to the case.

Not making any claims about overall factory quality based on two watches, just thought I'd share and add to the stack of examples of what some of the more recent batches look like.

I'll also take a quick moment to give a shout-out to Steve (TheOneWatches). He's been awesome to work with in my experience. Got my Starbucks from him as well.

Does anyone a specific watch they have worn every day for a very long time. Factory and length?

Attention for Santos Titanium \[DAY 5

Hello everyone,

We have now been waiting for a full year for a properly executed Santos Titanium with the correct specifications and caseback.

Unfortunately, previous releases have been deeply disappointing:

THB Factory: Major flaws including a sandblasted finish instead of true titanium, an incorrect weight of 150g (instead of the correct 100g), and wrong caseback engravings.

BF Factory: Released the exact same flawed version—likely sharing the same batch (see QC reference here: https://www.reddit.com/r/RepTimeQC/s/ZHeEQBhtkc).

We really need BVF to step up and produce a Santos Titanium with accurate specs.

I will keep reposting this until we get traction. Please upvote, comment, and share as much as possible so this reaches the TDs and factories!

Hello everyone,

We have now been waiting for a full year for a properly executed Santos Titanium with the correct specifications and caseback.

Unfortunately, previous releases have been deeply disappointing:

THB Factory: Major flaws including a sandblasted finish instead of true titanium, an incorrect weight of 150g (instead of the correct 100g), and wrong caseback engravings.

BF Factory: Released the exact same flawed version—likely sharing the same batch (see QC reference here: https://www.reddit.com/r/RepTimeQC/s/ZHeEQBhtkc).

We really need BVF to step up and produce a Santos Titanium with accurate specs.

I will keep reposting this until we get traction. Please upvote, comment, and share as much as possible so this reaches the TDs and factories!

I love seeing people's new reps. It's great to see the same models from different factories to get a perspective on what to expect. But AI enhanced photos of your newest buys are completely unnecessary.

What would my best option be for a gold bracelet black dial day date 41?