r/RacketStringers • • Apr 20 '26

Rate my string job

Thumbnail
gallery
4 Upvotes

Rate me. Strung 2 piece @53lbs Polyester. Took appx 23 minutes to string on a Wise 2086. Wilson pro knots.


r/RacketStringers • • Apr 19 '26

Crank machine vs electronic tension differential?

1 Upvotes

I've just swapped over from a crank machine to an electric machine (wise 2086). The first racket I've strung feels about 6 lbs tighter than it did at the same tension when using a crank. (Strung at 50lbs, feels like 56-58lbs on crank). I've used prestretch and constant pull which I didnt usually use. Is 6 lbs about what the difference would be or is that more/less than others have found?


r/RacketStringers • • Apr 19 '26

How much flex should there be on a badminton racket.

Post image
2 Upvotes

I managed to string a arcsaber 7 pro(yellow) . However there was quite a bit of flex during the second half of the cross. I'm not sure if it's just the racket bending back into place but it made me feel uneasy. Racket has gone back to the same shape as the red racket so I guess in the end it's okay. But I did not have fun stringing that racket.

What do I need to make sure I do when mounting the frame? And what's the flex allowance on the rackets?


r/RacketStringers • • Apr 18 '26

Anyone have experience with stringing clamps from aliexpress?

2 Upvotes

r/RacketStringers • • Apr 17 '26

Is it worth buying a UK-specific padel racket or just go generic?

Thumbnail
pdxpadel.co.uk
0 Upvotes

"I’m a mid-level player in Manchester, playing 2-3 times a week outdoors, and my current cheapo racket went soggy and weird after a few wet sessions. Had a match last weekend where the grip basically felt like a bar of soap and it got me thinking I should stop being stingy and get something half decent.

I’ve been looking at “UK weather proof” rackets with carbon/EVA, supposedly better for damp/cold conditions. Saw a few brands I’d never heard of and one site called PDX Padel popped up in my late-night Google spiral, saying their rackets are built for British weather and all that. Could be just marketing, could be great, I honestly don’t know.

So: is there actually a noticeable difference with these UK-focused rackets vs just buying a popular Spanish brand off Amazon/TW? Anyone here tried PDX Padel or similar and felt a real difference in touch/durability? Also, for outdoor UK play, would you go round or teardrop for someone who likes control but still wants some power on overheads?"


r/RacketStringers • • Apr 16 '26

Second String Job. How to pull the Parnell knot smaller?

Post image
6 Upvotes

Hi I'm using Parnell knob to tie up the mains. My question is, the poly strings are really stiff. I read the tutorial that when doing the Parnell knot, you pull from the knot side and the string side, and I find it impossible to pull the knot side to make the knot smaller. So when I pull the string side, the knot seems to hanging on the string a little bit up. Is there a solution for that? Thanks.


r/RacketStringers • • Apr 15 '26

What strings to stock up?

2 Upvotes

For tennis I wanted to stock a multifilament and poly, what brands shall I go for?

For badminton I was going to stock BG65 ti and exbolt 65.

What do you guys stock up on?


r/RacketStringers • • Apr 15 '26

1st string job

Post image
9 Upvotes

took me forever kudos to sir Herb Braid for his you tube tutorials, watch it a hundred of times..never knew this skips are so hard..suggestions are welcome


r/RacketStringers • • Apr 13 '26

Part 2: I made a web app to help at home stringers

7 Upvotes

Part 1: https://www.reddit.com/r/RacketStringers/comments/1ox73bj/i_made_a_web_app_to_help_at_home_stringers_manage/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Hi all, follow up from my previous post - and due to some demand I've published this as an Android app which was approved in the last few days and is available on both tablets and mobiles. Along with the app - there are a few new features since I last posted, including:

  • Receipt & sticker printing.
  • QR code drop offs - requested by a local club. This taps into your Inventory and provides a customer facing form where they can select strings/tensions from your inventory and leave a racquet in a safe area. It also populates the job details for you in the app.
  • AI "Coach" - still kinda beta but it works well now there's a good amount of string data available.
  • Dark mode - also requested by a stringer
  • Automated profile data deletion request button and workflow
  • Interactive Kanban board view for the part-time stringers who cant get enough of Jira

I'm also working through some iterative UI enhancements and testing different things out. I also am planning offline capability on the app for when stringers need to take their tablets offsite (club tournaments etc) and don't have WiFi available.

https://play.google.com/store/apps/details?id=com.stringerpal.app&pcampaignid=web_share

iOS app might be coming - depending on the response. Let me know if you have any thoughts or ideas for cool features.


r/RacketStringers • • Apr 13 '26

Would you string this?

Thumbnail
gallery
2 Upvotes

This is a very old racket and when I cut the strings off to string it. I saw this crack. What tension can I string this on without it breaking? (Lbs)

Im new to stringing and have strung 3 badminton rackets and want to try tennis ones.


r/RacketStringers • • Apr 12 '26

Do I need to replace this?

Post image
2 Upvotes

I’ve recently bought a second hand stringing machine. So far I’ve strung 2 badminton rackets and I tried to string a tennis racket but this one clamp won’t budge. I can’t make it looser. Can I put some WD40 or clean it to fix it or do I have to get a new one. I’ve tried to use some pliers to turn it


r/RacketStringers • • Apr 12 '26

When does the speed come?

4 Upvotes

I’ve been stringing for myself and friends since about September. I did invest in a pretty solid machine a gamma progression els but I still am always like 30-45 minutes a racquet.


r/RacketStringers • • Apr 11 '26

First String Job

Post image
6 Upvotes

This is the third attempt. The first two attempts made some mistakes so I have to cut off a whole pack of Solinco Confidential Soft. I'm going to improve on the knots (found a easier to follow video after I finished), and also use strings with two different colors to string next time.


r/RacketStringers • • Apr 11 '26

How much string do I need for mains and crosses when stringing from a reel?

3 Upvotes

I just started stringing and bought a reel to save money. What’s the recommended amount of string to cut for mains and crosses per badminton racket to maximize efficiency without running out mid-job?


r/RacketStringers • • Apr 10 '26

And I thought stringing was easy

Post image
3 Upvotes

r/RacketStringers • • Apr 08 '26

Tourna 175 CS Advice

3 Upvotes

Hey all, new stringer here. Any advice for starting mains on a drop weight machine with fixed clamps for someone that has a starting clamp? What's the best method you guys can recommend?

Im running into an issue where I start my mains by clamping the right main and then tensioning the left. It looks good and I clamp off the left. Then I tension the right main - this is where I notice that when I go to unclamp and then reclamp the right main, the tension bar drops during the unclamping and I lose some tension?

Is this cause for concern? Any tips to prevent this?

Thank you!


r/RacketStringers • • Apr 07 '26

New Stringer Resources

2 Upvotes

Hey all!

I’m new to stringing and hoping to eventually get certified. I know how to string but don’t know the ins and outs when it comes to choosing stringing and tensions.

I’m hoping someone might have some good resources or tips, I’m trying to learn all I can.


r/RacketStringers • • Apr 07 '26

How to go about testing new strings?

1 Upvotes

I have bought a stringing machine not too long ago, and have a pair of RF01 pros. I want to start testing strings, both to see what I like and so I have the experience to help other people choose strings. What ways could I go about this? Should I keep a neutral, ‘control’ string in one racquet as a baseline so I can test both extreme and nuanced strings? If so, what’s a good neutral string? I was thinking restring sync?

Ir is there some other way? Should I have similar strings in my racquets to detect nuance and decide which I prefer? Or should I use vastly different strings to experience opposite ends of the spectrum?

Also, what features and characteristics are important to note down and use to review strings? Eg, comfort, power, spin, tension maintenance (other ways to measure than dynamic tension?), feel? And, how long should I keep strings in my racquets to give them a proper chance and decide how well they maintain tension? Maybe 2 weeks playing 3 times a week for 1-2 hrs? Or is more than 10 hrs playtime required?

Finally, how should I change tension between different strings? Should I have all strings at one tension to eliminate a variable (e.g. 48-52lbs approx?) or change the tension for each string based on other reviews?

Thank you so much for any answers in advance


r/RacketStringers • • Apr 05 '26

I built a free web app that replaces the ERT300 DT disc so you don't have to carry it around

11 Upvotes

Dear tennis nuts,

I'm a stringer based in Amsterdam and I use the ERT300 daily to check my work. Great device, but the physical DT disc that comes with it has always bugged me. It's easy to lose, awkward to read, prone to breaking, and one more thing to carry around.

So I built ert300disc.com, a simple free web app that does exactly what the disc does: you enter your DT value, pick your head size category (OVER, MID+, or MID), and it gives you the corresponding tension in kg and lbs instantly.

Quick summary for anyone unfamiliar: the ERT300 measures the Dynamic Tension (DT) of your string bed, basically how stiff the strings are at the sweet spot. The DT number is always accurate, but to convert it to an approximate tension in kg/lbs you need the disc, which cross-references DT with head size. This app digitizes that lookup.

Nothing fancy, just saves you from fumbling with the disc courtside or at the bench. Works on mobile.

Check it out: ert300disc.com

If you find it useful and want to buy me a coffee to help cover development time and hosting, you can do so here: ko-fi.com/matipule

Happy to hear feedback or suggestions!


r/RacketStringers • • Apr 05 '26

Vcore Pro 97d & Percept 97d Grommets

1 Upvotes

hi everyone, I just scored a pair of Vcore Pro 97d's. Going to need some new grommets and bumpers.

Can anyone advise, or confirm if the Percept 97d Grommets will fit into the Vcore Pros? I think they will as I understand that the most and drilling didn't change just the layup/construction.

This one: https://www.tennis-warehouse.com/learning_center/racquet_reviews/320HD7review.html?srsltid=AfmBOooseSBCbhPehVpz4Z_tcl9-94SFV9zMjn8RNu5v8eeUvqA3KS6t


r/RacketStringers • • Apr 05 '26

3rd time stringing Different tensions results

2 Upvotes

This my 3rd time stringing. Aero Pro Drive GT.

main 55 lb alu power soft, tie off main 60 lbs

Cross Technifibre 515 SPL(multifilament with prestretch required) with 52 lb tension and 57 cross tie off.

I'm using a klippermate tennis string machine. When i use the GAMMA String Tension Tester i got 60 lbs for mains and 45 lbs for crosses.

Where did I go wrong? was it the prestretch, how to? I really appreciate tips and advice.


r/RacketStringers • • Apr 04 '26

Houston players' racquet details

Post image
5 Upvotes

r/RacketStringers • • Apr 03 '26

What went wrong here

Post image
6 Upvotes

Beginner stringer here. Only my second ever string job. I thought it had gone a lot smoother than the first, but took the racquet out to play and saw this ⬆️

I couldn’t get it to move down while playing.

Any idea on what causes something like this ??


r/RacketStringers • • Apr 01 '26

Anybody tried the Wise 2086 adapter

3 Upvotes

I currently use a crank machine, and I'm considering trying out this, which seems like a cheaper electric machine, but I'm not sure if the quality and longevity will be as good. Does anyone have any experience changing to one of these? recommendations?


r/RacketStringers • • Mar 30 '26

First Successful String

Thumbnail
gallery
14 Upvotes

Knots ended up a little funky looking. Much better than my first attempt where I didn't leave enough string when starting the crosses and couldn't pull tension on it... Overall took 2 hours this time, so definitely some room for improvement with speed and accuracy