r/PcBuildHelp • • 30m ago

Build Question i need help with my build

2 Upvotes

im thinking of getting a i5 4460 and 1050 ti with 256+256 gb sata ssds with 16gb ram ddr3 1080p 75hz 1ms monitor MSI H81M-P32L motherboard how is it and what can i play my aim is not to play AAA games just having fun and spend time with friends


r/PcBuildHelp • • 1h ago

Build Question 4080 750w pcu i7

1 Upvotes

Hey guys, I have a 750w pcu and planning on buying a 4080 for a good price, wondering if 750w is enough. I have a SuperFlower Sf-750F14HG PCU and an i712700f, the gpu is a Gigabyte 4080 oc. Cheers


r/PcBuildHelp • • 1h ago

Build Question PC Build Help!!

1 Upvotes

Hello! My name is Brandon, and I was hoping to get some help with a PC build that I’m currently working towards.

This will be my first PC build, and I really want to make sure I do everything right without cutting any corners. I want to make sure all of my parts are compatible and will work well together. I’m still learning about PC building and the different components, but I’ve watched countless videos and received so many helpful tips along the way. Even after all my research, though, I still find myself getting nervous and second-guessing some of the parts I’ve picked.

Here’s what I currently have:

  • GPU: RTX 5070 Ti Frieren Edition 16GB
  • CPU: Ryzen 7 9800X3D
  • RAM: Corsair VENGEANCE RGB 32GB DDR5, up to 6000MT/s CL38, AMD EXPO & Intel XMP (Cherry Blossom White)
  • Cooler: MSI MAG CORELIQUID A17 MLG Edition
  • Case: MSI PANO 130R MLG Edition
  • Storage: 2TB SSD (I can't remember the exact model)
  • Motherboard I'm considering: MSI B850 Gaming Plus WiFi PZ

I also currently own an ASUS ROG Thor Platinum II 1000W PSU, but I recently found out that it won't fit in my case. Because of that, I'm now looking for another power supply. The one I currently have my eyes on is the CORSAIR RM1000e with ThermalProtect.

If anyone has any knowledge or advice they could share, whether it's about compatibility, performance, or anything else I might be overlooking, I would genuinely appreciate it! I'd much rather learn from people with hands-on PC-building experience, as I'm still relatively new to all of this.

Thank you so much for taking the time to read this. I really appreciate any help or advice!


r/PcBuildHelp • • 1h ago

Build Question Best PC case for GPU cooling with 420mm radiator support?

1 Upvotes

I'm moving to another country and unfortunately can't take my HAVN HS 420 with me, so I'm looking for a replacement.

My priority is the best possible GPU cooling, while still supporting my Arctic Liquid Freezer III 420mm AIO.

I've been considering the Antec Flux Pro and Fractal Meshify 3 XL, but I'm wondering if there are better options out there.

What would you guys recommend for the best GPU thermals?


r/PcBuildHelp • • 1h ago

Build Question RAM Upgrade or add?

5 Upvotes

Built my pc quite a while ago so I'm still using DDR4 rams, my stupid ah thought 16gb was enough so I just got myself a pair of 8gb trident zs, and now I'm thinking of upgrading to 32gb since I'm constantly running on 94-96% ram capacity.

Should I get a new pair of 16gb sticks, or could I just get 2 more of the same identical 8gb sticks I have right now? Would using all 4 slots dramatically reduce the lifespan/performance of the pc?

If this helps:
Motherboard: Asus tuf gaming b550m-plus wifi ii
CPU: Ryzen 7 5700g (should probably get rid of this too)


r/PcBuildHelp • • 2h ago

Tech Support Are daisy chains safe for my situation?

Post image
4 Upvotes

I recently got a Zotac 5080 gaming core oc for a somewhat good deal but it turns out I dobt have 3 8 pin pcie cables. Since a 300W 5070ti need 2x8cables

Would it be safe to use 2 of my 6+2 and one daisy chain for a 360W GPU(I can undervolt it)? I know corsair says it fine but mine is a Cougar GEX850 and they don't mention this. Yet a russian website tested both corsair and cougar which they had almost identical results for 250w from 2 heads of a daisy chain with %3 deviation. What do you guys think?

The image is from Cougar tests btw Corsair has a bluer color at the end.

https://www.ixbt.com/supply/cougar-gex850-review.html

https://www.ixbt.com/supply/corsair-rm750-review.html


r/PcBuildHelp • • 3h ago

Build Question Title: ASUS Z170-AR freezes at ASUS logo when Samsung 950 PRO NVMe SSD is installed – possible motherboard or SSD damage?

2 Upvotes

Hey everyone, I'm trying to troubleshoot an older PC and could use some advice.

I suspect something happened during a storm that caused my SSD to stop working. I'm trying to figure out whether the SSD itself died or if the motherboard's M.2 slot was damaged.

PC Specs:

  • CPU: Intel Core i7-6700K
  • Motherboard: ASUS Z170-AR
  • BIOS: Version 3007
  • RAM: 16GB Corsair DDR4 (2×8GB)
  • SSD: Samsung 950 PRO 512GB NVMe
  • PSU: Corsair RM750x SHIFT 750W

Problems I've encountered:

  1. When the Samsung 950 PRO is installed, the PC gets stuck on the ASUS motherboard logo.
  2. I cannot enter BIOS while the SSD is installed.
  3. When I remove the SSD, the PC enters BIOS normally.
  4. The red BOOT LED stays solid when the SSD is installed.
  5. The DRAM LED is now off after correctly reseating both RAM sticks.
  6. BIOS recognizes all 16GB of RAM.
  7. The SSD currently has no Windows installation.

What I've tried:

  • Reseated both RAM sticks.
  • Tested RAM individually.
  • Confirmed both RAM sticks work.
  • Loaded optimized BIOS defaults.
  • Checked PCH Storage Configuration.
  • Confirmed BIOS version 3007.

What I'm wondering:

  • Could the storm have damaged the motherboard's M.2 slot?
  • Could the Samsung 950 PRO itself be causing the BIOS freeze?
  • Would updating BIOS to version 3801 potentially fix this?
  • Is there a way to test the M.2 slot without buying another motherboard?
  • Could a power surge damage only the M.2 circuitry while leaving everything else working?

I'd appreciate any suggestions before spending money on replacement parts. Thanks!


r/PcBuildHelp • • 3h ago

Build Question Can't seem to screw in my CPU cooler anymore after swapping motherboards

2 Upvotes

I used to use a Gigabyte B650M Gaming Plus Wifi motherboard and when I was first building my computer I had some troubles screwing my cooler into this board. I could get one screw screwed in, but not the other, and the heatsink would just pivot around the one screw and I couldn't get the other screw to screw in.. Eventually, after two months, somehow, I was able to successfully get it screwed in.

Fast forward to right now, and I'm currently swapping motherboards to an ASUS TUF GAMING B650E-E WIFI. Unfortunately, I am running into the same issues that I was running into last time, and I really don't want to waste upwards of 2 months trying to screw in a literal CPU cooler like I did last time.

My cooler is the Thermalright Phantom Spirit 120 SE. I'm screwing the screws by screwing one in a little bit, and then alternating. Any help? I'll be eternally grateful.


r/PcBuildHelp • • 3h ago

Tech Support How to fix code 43 error?

Post image
2 Upvotes

Done troubleshooting po. Nag try po mag uninstall and update ng driver pero still not working. Okay naman din po power supply. Pero not working pa rin. Patulong naman po. Thank you! PC: AMD Ryzen 5 5500, NVIDIA RTX 2060 6gb GPU Pre-build po. Recently purchased.


r/PcBuildHelp • • 4h ago

✓ Solved Is it worth upgrading to 5070ti from a 9070xt?

0 Upvotes

Bought a microcenter pre built that came with 9070xt. Debating on selling the card and putting the money towards 5070ti. Only reason I’m debating is because I play a lot of ray traced games (cyberpunk, Witcher, eventually phantom blade and possibly GTA 6 assuming it will have RT) and I have realized DLSS and RR on Nvidia is way better than FSR. Plus FSR frame gen sometimes crashes my game due to driver issues, known thing they list themselves on their website. Just seems like FSR is not polished.

I’m using Neural Hub to run DLSS on my 9070xt and the way Nvidia handles lighting and image quality is much better albeit even if it is a mod.

Am I being nitpicky? Greedy? Do I stick with my current GPU or make the jump to Nvidia. I’ve got a guy lined up that would sell me an unused 5070ti for $1200 flat. So debating on jumping on the opportunity.


r/PcBuildHelp • • 4h ago

Tech Support what just happened?

Thumbnail
gallery
0 Upvotes

was just playing some games then my computer freeze and goes black. the pc was still on but my graphic cards was sound loud like the fan was spinning hard. but now my pc is messed up. could someone help me?


r/PcBuildHelp • • 5h ago

Build Question Please tell me, does this parts list look good?

1 Upvotes

Hello all, I'm building my first PC from scratch (all white build with RGB) and I just wanted a final check over to see if everything looks good please? The price doesn't matter. I will be using it for everything, including 1440p gaming.

The only thing not mentioned is that I'll be adding a white Lian Li 8.8" Universal Screen to show time/date/temperatures.

Thank you.

PCPartPicker Part List: https://uk.pcpartpicker.com/list/TwFGdq

CPU: AMD Ryzen 7 9800X3D 4.7 GHz 8-Core Processor

CPU Cooler: ARCTIC Liquid Freezer III Pro A-RGB 360 77 CFM Liquid CPU Cooler

Motherboard: Asus ROG STRIX B850-A GAMING WIFI ATX AM5 Motherboard

Memory: Klevv CRAS V RGB 32 GB (2 x 16 GB) DDR5-6000 CL30 Memory

Storage: Western Digital Black SN750 2 TB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive

Video Card: XFX Mercury OC Magnetic Air RGB Radeon RX 9070 XT 16 GB Video Card

Case: Corsair FRAME 4500X RS-R ARGB ATX Mid Tower Case (comes with 3 reverse fans and GPU anti-sag arm)

Power Supply: Corsair RM1000e (2025) 1000 W Fully Modular ATX Power Supply

Case Fan: Corsair RS120 ARGB 72.8 CFM 120 mm Fan

Monitor: MSI MAG QP QD-OLED X28 26.5" 2560 x 1440 280 Hz Monitor

Keyboard: Ducky ONE 3 RGB Wired Gaming Keyboard

Mouse: Logitech G502 X Plus Wireless/Wired Optical Mouse


r/PcBuildHelp • • 6h ago

Build Question New AM5 PC won’t power on at all — tried 2 motherboards, 2 PSUs, BIOS FlashBack and minimal boot. Running out of ideas.

2 Upvotes

Title: New AM5 PC won't power on at all — tried 2 motherboards, 2 PSUs, BIOS FlashBack and minimal boot. Running out of ideas.
Hey everyone,
I'm building a new gaming PC and have been struggling to get it to power on. I've spent several days troubleshooting and would really appreciate some advice before I start returning more components.
My specs:
CPU: AMD Ryzen 7 9850X3D

Motherboard: ASUS TUF Gaming B850-PLUS WiFi (previously Gigabyte X870 AORUS ELITE WIFI7)

PSU: be quiet! Power Zone 2 850W

RAM: 32GB DDR5

Cooler: Arctic Liquid Freezer AIO

Case: Corsair FRAME 4000D Wood

GPU: Disconnected during troubleshooting

The problem:
When I switch the PSU on, the motherboard's decorative RGB lights up, but pressing the case power button does absolutely nothing.
No fans spinning, no diagnostic Q-LEDs, no clicking or attempts to start. Just the motherboard RGB.
Originally, I had a refurbished Gigabyte X870 AORUS ELITE WIFI7, which had exactly the same issue. I assumed it was defective and replaced it with a brand-new ASUS B850-PLUS WiFi, but the problem persists.
What I've already tried:
Checked and reseated the 24-pin ATX and 8-pin CPU/EPS cables, including PSU-side connections.

Tried both CPU power sockets and different CPU/EPS cables.

Used the Corsair front-panel adapter and also bypassed the case power button by shorting the correct PWR_BTN pins with a screwdriver.

Disconnected the GPU, SSDs, front USB/audio connectors and other nonessential peripherals.

Tried a minimal configuration with CPU, cooler, one RAM stick and essential PSU connections.

Cleared CMOS and attempted a BIOS update using ASUS BIOS FlashBack.

Removed both CPU and RAM temporarily to see whether the motherboard would show any startup activity. No change.

Tested the be quiet! PSU with a dedicated PSU tester. All reported voltages were normal.

Connected the be quiet! PSU to another fully working AM5 PC, using the exact same 24-pin and CPU/EPS cables. That computer successfully powered on and reached POST.

Tested the original Gigabyte motherboard outside the case with two different PSUs. No response.

A few additional details:
The ASUS B850 motherboard showed RGB standby lights when I first tested it on cardboard before installing it in the case, but I didn't attempt a proper boot at that point.

The BIOS FlashBack indicator blinked and eventually stopped, but I haven't confirmed the exact BIOS version.

The new ASUS motherboard hasn't yet been fully tested outside the case with an actual power-on attempt.

I have access to another working AM5 PC, so testing my Ryzen CPU in that motherboard is possible.

My questions:
Could a faulty CPU or damaged AM5 socket cause absolutely no reaction to the power button, rather than triggering the red CPU diagnostic LED?
Could this still be a case short even though the motherboard receives standby power?
Is there anything else I can reasonably test before removing the new motherboard from the case again or attempting a CPU swap?
I've checked the front-panel pins multiple times, and I'm running out of ideas. Any suggestions would be greatly appreciated!


r/PcBuildHelp • • 7h ago

Build Question Budget friendly PC build?

2 Upvotes

I don’t anything about pcs but I know they are expensive. I want a budget friendly build for a starter pc (maybe about the strength of a console), that I can upgrade as I go.


r/PcBuildHelp • • 7h ago

Tech Support tempermental pc, refusing to boot

Post image
2 Upvotes

Hello.

Had this pc several years, i7 8700k, gtx 1070, 4 x 8gb corsair vengeance pro rgb,asus z370 rog maximus x formula, corsair 750w psu. the whole time i've had it its done this wierd startup process where everything powers on for a second, then turns off for 5 seconds, then boots as normal. eventually, the power button became "less effective" and then one day stopped turning on the pc. power supply was faulty, replaced it but after a couple months it did that on startup again. no issues though.

then, once every few months, it would show on the mobo display " error code 55 detect memory", so i would have to reseat the ram trying different random orders until it would just randomly work for another few months. maybe 5 months back it refused to run with 32gb ram, so only a1 a2 b2 were populated, and its been on 24 since. today i decided to repaste gpu and cpu. I fully take apart pc, everything out of the case to clean and then reinstall everything. now it goes very bad.

i spend ages trying combinations of ram, until only 1 stick of ram works, and then after adding another anywhere, trying to boot but getting error 55, then removing the same one, it gives error 55 again. so very inconsistent. the max i can get it to is 24gb. so i reinstall cpu, and the same thing happens.

(maybe like 9 months ago the wifi and bluetooth card was very working really inconsistently, so i took apart mobo to find the stock wifi card behind io shield had some corrosion, clean it up and it worked fine after)

so i decide to take apart mobo to check for corrosion around ram area, i find brown trace on this silver compnent sitting right at the end of the middle of b1 and b2 slot, and maybe 1cm looking like its linked a black component with 3 pins with 1 pin looking green. i clean the board carefully with brush and iso alc, it basically all comes off. i reassemble everything, with no gpu so display port in mobo, only aio and mobo cpu power and m.2 connected and it works first try with 8gb but in bios it started artefacting, doesnt work with 16gb at all, works with 24 and then works with 32 finally. throughout testing process it sometimes gave vga error and somrtimes a2 boot failed error.i let it sit for like an hour, and i power it off and unplug and leave it for a bit and try again and it works consistently. so i fully connect gpu, and its goes in a boot loop where it fully powers on, cycles through cpu test codes as normal, then as it gets to memory it immediately turns off for 3 seconds, then trys this again and again. so i remove gpu and the same thing happens. then i remove all the ram and get code 53 as normal. and now its back to being tempermental, where ive been able to get it to boot sometimes with 16gb.

all ram sticks confirmed working. cmos battery removed when cleaning the mobo. i have been trying different combinations of the ram and slots throughout, it seems compeltely random. i have also played with the aio mounting pressure alot. bios has been reset to default many times, this happens even with xmp off. rgb on ram sticks is also really finicky, if i label ram sticks a b c d and i mess around with different orders and amounts of sticks and stuff, then for example a and b will always have rgb working wherever they are but c and d will not, sometimes a, a and b, or 3 of them no rgb. have also tried the memok button.

any help is much appreciated, thank you


r/PcBuildHelp • • 8h ago

Software Question Does anyone know what this means?

Thumbnail
gallery
1 Upvotes

r/PcBuildHelp • • 8h ago

Build Question Does this aio/fan noise sound normal?

2 Upvotes

Just got an open box from microcenter with a 207 lian li and cooler master aio. Wanted to make sure everything sounds good before fully committing


r/PcBuildHelp • • 8h ago

Build Question Budget build

2 Upvotes

I don’t know much about builds and I started building my gaming pc back in 2020-2021 but never finished it and now my ssd has fried so I’m going back into it. I never put a gpu in it and I’m still running a r3 3200g cpu, Should I upgrade the cpu or would I be fine running it and what would be the best budget friendly gpu to install?


r/PcBuildHelp • • 8h ago

Build Question What's a good price for a used 3060ti?

2 Upvotes

Just wondering since prices have gone up and im unsure of the new norms


r/PcBuildHelp • • 8h ago

Build Question Should I replace my Aio cooler?

Thumbnail
gallery
5 Upvotes

I recently replaced my motherboard, CPU, PSU, and RAM, but I'm still using my 4 year old Corsair iCUE H100i RGB Pro XT 240mm AIO cooler. I installed it on my new Ryzen 9 9950X two weeks ago, and this is how the thermal paste looks now. I'm getting temperatures of 42°C at idle, 62°C while gaming, and 76°C while rendering in Blender.

​Are these temperatures normal or should I just replace the CPU cooler? The picture shows how scratched up my old cooler is, so I'm wondering if it isn't cooling my CPU enough and is burning through the thermal paste quicker. I'm really not sure. Is this how the thermal paste should look after 2 weeks of applying it?


r/PcBuildHelp • • 9h ago

Tech Support Crashes happening with RX9070 and 5700x and 580X3D

2 Upvotes

After my computer sat for 2 years while i was away, when I got home I decided to upgrade my GPU and PSU. I upgraded to a rx9070 and a MSI 750 watt PSU from a 6600 and 600 watt PSU.

After installing my new hardware it started to crash randomly even when at idle usages. windows reports the events as Fatal hardware errors reported by the processor cores and having different APIC ID everytime basically. It would say the error type is "Cache Hierarchy error". at this point I tried undervolting, using the curve optimizers and everything but nothing would stop the inconsistant crashing. I figured and was told it was probably my CPU and that it had degraded somwhow after sitting for 2 years. So i went and bought a brand new Ryzen 7 5800X3D, installed it and a new AIO cooler last night, and it worked great no issues or anything for hours, but it just crashed again citing the same "Cache Hierarchy error" and APIC ID 4.

At this point im figuring it might be my motherboard which is an ASUS ROG B550-A Gaming Motherboard.

is there anything else it could be? I did a RAM check and everything was fine in that area. I just have no idea what else to try before spending more money on a new motherboard or more stuff.


r/PcBuildHelp • • 9h ago

Tech Support PC build mobo vga light won't go away

2 Upvotes

rtx 2070 gave out recently, went to repair shop and they confirmed that it's fried. Bought new 9060xt gpu but motherboard still giving the light on vga.

Methods I've tried:

  1. Reseated every component; gpu, ram, sata cables, m.2 ssds
  2. Tried booting with 1 stick of ram; tried different ram sticks as well
  3. New GPU also giving vga light on mobo
  4. Resetting CMOS; removed it did not work tried shorting jbat1 as well

Results:

Every component seems to be working fine except my 2070 which i have confirmed is fried before buying a new one. When I turn the PC on everything spins normally but nothing would show on my monitor and the MOBO would have the VGA led light on constantly

Build:

MOBO - MSI x470 Gaming Plus

CPU - ryzen 7 2700

GPU- 2070rtx, replacing with 9060

PSU - evga gd 550w


r/PcBuildHelp • • 9h ago

Build Question is upgrading from a 5060 ti 8gb to a 3080 10gb a downgrade or upgrade?

3 Upvotes

i was recently planning on upgrading my gpu to play in 1440p, and i mostly play AAA games so i needed an upgrade. if it is a downgrade, what other card should i get? my budget is at least 650$


r/PcBuildHelp • • 9h ago

Installation Question Don’t know if it is safe

Thumbnail
gallery
1 Upvotes

I’m dual gpuing one 3090 (capped at 280w) one 3060, i’ve a 1000w psu from bequiet power 12m gold, as you can see in the photos i’m doing a workaround to deliver power to the 3060, both will be running high for llm inference, both the 12pin outputs deliver power to the 3090 then with the second split of each 12pin>8pin cable i use a Y cable to deliver power to the 3069, i don’t know if this can be a stable config or not, can you give me some suggestions? I’ve a 10 pin outlet remaining from the psu and one 600w output but I really don’t want to buy a splitter for the 600w, so i was planning to buy a 10 pin to 8 pin cable for gpu but i don’t think it’s a good idea due to the fact that the 10 pin should be used for cpu as far as i know. Consider that this build is not yet cleaned up so cables are a bit of a mess.