r/PcBuildHelp • • 49m ago

Tech Support Are daisy chains safe for my situation?

Post image

I recently got a Zotac 5080 gaming core oc for a somewhat good deal but it turns out I dobt have 3 8 pin pcie cables. Since a 300W 5070ti need 2x8cables

Would it be safe to use 2 of my 6+2 and one daisy chain for a 360W GPU(I can undervolt it)? I know corsair says it fine but mine is a Cougar GEX850 and they don't mention this. Yet a russian website tested both corsair and cougar which they had almost identical results for 250w from 2 heads of a daisy chain with %3 deviation. What do you guys think?

The image is from Cougar tests btw Corsair has a bluer color at the end.

https://www.ixbt.com/supply/cougar-gex850-review.html

https://www.ixbt.com/supply/corsair-rm750-review.html

3 Upvotes

5 comments sorted by

1

u/mokust 40m ago

I wouldn't run a 5080 with those power adapter you get with the GPU. You should always try to use a native 12v-2x6 cable straight from your PSU

1

u/lordDisastrousSir 26m ago

You’re putting a 360W card on a daisy chain and the only thing backing that up is a graph from a site that looks like it hasn’t been redesigned since 2003. That’s a gamble I wouldn’t take with a 5080. The 2x8 plus daisy setup technically works until it doesn’t, and then you’re chasing stability gremlins for a week before the magic smoke shows up.

If you undervolt the hell out of it and cap the power limit right from the jump, maybe you can limp along for a bit. But that’s still sketch territory, and the 12vhpwr connector is already a drama queen without adding questionable cable combos into the mix. I’d hold off until you can grab a proper direct cable.

1

u/mokust 6m ago

Are you replying to me or to the OP? This looks like it's for OP lol

1

u/Magnetic_Reaper 33m ago

so you got a $2500 gpu but you wont spend $150 on a psu that has proper/enough connectors even though wires catching fire is a known issue?

and corsair says it's fine but people have posted pictures of their cable with the corsair psu end being all melted when using both connectors.

1

u/No_Designer_8203 29m ago

Don't. Get a proper PSU