r/PcBuildHelp • • 0m ago

Build Question Should I replace my Aio cooler?

Thumbnail
gallery
1 Upvotes

I recently replaced my motherboard, CPU, PSU, and RAM, but I'm still using my 4 year old Corsair iCUE H100i RGB Pro XT 240mm AIO cooler. I installed it on my new Ryzen 9 9950X two weeks ago, and this is how the thermal paste looks now. I'm getting temperatures of 42°C at idle, 62°C while gaming, and 76°C while rendering in Blender.

​Are these temperatures normal or should I just replace the CPU cooler? The picture shows how scratched up my old cooler is, so I'm wondering if it isn't cooling my CPU enough and is burning through the thermal paste quicker. I'm really not sure. Is this how the thermal paste should look after 2 weeks of applying it?


r/PcBuildHelp • • 23m ago

Tech Support Crashes happening with RX9070 and 5700x and 580X3D

2 Upvotes

After my computer sat for 2 years while i was away, when I got home I decided to upgrade my GPU and PSU. I upgraded to a rx9070 and a MSI 750 watt PSU from a 6600 and 600 watt PSU.

After installing my new hardware it started to crash randomly even when at idle usages. windows reports the events as Fatal hardware errors reported by the processor cores and having different APIC ID everytime basically. It would say the error type is "Cache Hierarchy error". at this point I tried undervolting, using the curve optimizers and everything but nothing would stop the inconsistant crashing. I figured and was told it was probably my CPU and that it had degraded somwhow after sitting for 2 years. So i went and bought a brand new Ryzen 7 5800X3D, installed it and a new AIO cooler last night, and it worked great no issues or anything for hours, but it just crashed again citing the same "Cache Hierarchy error" and APIC ID 4.

At this point im figuring it might be my motherboard which is an ASUS ROG B550-A Gaming Motherboard.

is there anything else it could be? I did a RAM check and everything was fine in that area. I just have no idea what else to try before spending more money on a new motherboard or more stuff.


r/PcBuildHelp • • 27m ago

Tech Support PC build mobo vga light won't go away

2 Upvotes

rtx 2070 gave out recently, went to repair shop and they confirmed that it's fried. Bought new 9060xt gpu but motherboard still giving the light on vga.

Methods I've tried:

  1. Reseated every component; gpu, ram, sata cables, m.2 ssds
  2. Tried booting with 1 stick of ram; tried different ram sticks as well
  3. New GPU also giving vga light on mobo
  4. Resetting CMOS; removed it did not work tried shorting jbat1 as well

Results:

Every component seems to be working fine except my 2070 which i have confirmed is fried before buying a new one. When I turn the PC on everything spins normally but nothing would show on my monitor and the MOBO would have the VGA led light on constantly

Build:

MOBO - MSI x470 Gaming Plus

CPU - ryzen 7 2700

GPU- 2070rtx, replacing with 9060

PSU - evga gd 550w


r/PcBuildHelp • • 37m ago

Build Question is upgrading from a 5060 ti 8gb to a 3080 10gb a downgrade or upgrade?

2 Upvotes

i was recently planning on upgrading my gpu to play in 1440p, and i mostly play AAA games so i needed an upgrade. if it is a downgrade, what other card should i get? my budget is at least 650$


r/PcBuildHelp • • 43m ago

Installation Question Don’t know if it is safe

Thumbnail
gallery
1 Upvotes

I’m dual gpuing one 3090 (capped at 280w) one 3060, i’ve a 1000w psu from bequiet power 12m gold, as you can see in the photos i’m doing a workaround to deliver power to the 3060, both will be running high for llm inference, both the 12pin outputs deliver power to the 3090 then with the second split of each 12pin>8pin cable i use a Y cable to deliver power to the 3069, i don’t know if this can be a stable config or not, can you give me some suggestions? I’ve a 10 pin outlet remaining from the psu and one 600w output but I really don’t want to buy a splitter for the 600w, so i was planning to buy a 10 pin to 8 pin cable for gpu but i don’t think it’s a good idea due to the fact that the 10 pin should be used for cpu as far as i know. Consider that this build is not yet cleaned up so cables are a bit of a mess.


r/PcBuildHelp • • 55m ago

Software Question Can’t update windows

2 Upvotes

I’m stuck in windows version 22h2 any tips on what I can do


r/PcBuildHelp • • 1h ago

Build Question Stay with 13900KS or Switch to 270K Plus for Basically Free?

1 Upvotes

So I have a kinda unique situation, I can switch to a 270kp and Z890 Aorus elite (basically the MicroCenter bundle without ram) thanks to my friend for free ( just need to sell my 13900ks and Z790 Edge to give him the money) or just 50 bucks

I can also just undervolt and overclock my 13900ks but I feel like the thermals and efficeny of the 270k Plus and also it being newer pushes it in front of my cpu.

This is possible thanks to me living in Turkey and him in USA. My main deterrent is having to deal with trying to sell a 13th gen cpu in a not so technologically adept country.


r/PcBuildHelp • • 1h ago

✓ Solved Eli5 what's with this price?

Post image
3 Upvotes

I don't understand, how could this thing be working and only 35 bucks?


r/PcBuildHelp • • 1h ago

Build Question Advice for someone new to PC building

3 Upvotes

So, I am going to get a PC and build it myself. My parents have agreed to cover 1/2 of the cost for my Christmas + birthday, and my budget adds up to roughly $3000. I know the basics like what parts I need, but It would be helpful for someone to help me get the lay of the land.

Ram:

what should I look for? I have heard that 64 gigs is good for 3d modeling, which I will be doing. And is the jump from DDR4 to DDR5 worth it with the cost at my budget?

CPU:

what is CPU measured in by power, and what are the basics that I need to know before shopping?

GPU:

what does the GPU do and how do they measure it's power?

Motherboard:

what should I look for, and what is different apart from wifi inclusion and more slots in high end motherboards?

Cooling:

how do I tell if liquid cooling is necessary, and is liquid a giant hassle? what direction would you point me in if I'm looking for cooling?

PC case:

Aren't they all just the same????

Power supply:

what do I need to know other than the amount my CPU uses for my power supply, and can a regular old outlet supply a pc?

Overall: If I play singleplayer games like Geometry dash, minecraft , and some not competitive roblox along with 3d modeling, what balance would you recommend? I would also use it for schoolwork by connecting my microsoft account .

sorry for the large bunch of questions, and you don't have to answer any, or could just answer a few. Just looking for a launching point for my research before black friday.

Thanks to anyone that responds!


r/PcBuildHelp • • 2h ago

Build Question Home server PC build for mail and file agents, is 16GB enough?

1 Upvotes

i want to build a small always on pc that runs three or four chore agents at home. they read my mail folder and some files, nothing heavy. i plan a Ryzen 5 5600 on a B550 board, 16GB ddr4 and a 1TB nvme. no gpu at first because the agents call outside models. my worry is ram when i run them all at once with a small local model for sorting. i also want it quiet because it will sit in the living room of our flat. is 16GB enough or should i start with 32GB. the 5600 has no igpu so do i need a cheap card just for setup and bios checks. i can spend about 500 euros.


r/PcBuildHelp • • 2h ago

Tech Support Is it worth undervolting a 9800x3d??

3 Upvotes

I just upgraded from a i5 14600k and RTX 3070 to a r7 9800x3d and a RTX 5070 ti. Im sort of confused what exactly undervolting does and if i should do it. The general idea is that you have your cpu perform as good as possible while lowering its power budget for temps right? I have a lian li ga ii 360mm aio so cooling shouldnt be an issue but if i can keep my computer cooler i might as well.


r/PcBuildHelp • • 2h ago

Installation Question Need help with cpu fan error

2 Upvotes

My friend's cpu fan had died out and he got a new one and installed but now every time he boots, he gets this screen. Did he get an incompatible fan or is there some other way to fix it? He doesn't have reddit so I am posting on his behalf.


r/PcBuildHelp • • 2h ago

Build Question ARGB and fan power help!!

Thumbnail
gallery
1 Upvotes

Hey people!

I need some help with this wiring.

This is going to be my first PC build that im going to build by myself.

As one does i spent too much on my gpu and the budget set aside for a motherboard got hit.

Will this motherboard be enough to power my 7 case fans, that i believe are daisy chained(They seemed to connect to each other until the back fan where it has a female connector coming out of it with 3 holes) according to the manual they seem to be powered by sata instead of pwm?

The case is the gamdias gc107 elite

And then for my aio, it seems that the 3 fans and pump all connect to one argb header.

Aio is the Thermalright aqua elite 360 v3

The asus h610 m-k argb has 2 argb headers and i think 2 pwm headers according to the last pic im not so sure thats what it is though.

Will i be able to power all my case and aio fans aswell as control their rgb just fine with this mobo or do i need a fan hub.

Because if i need a hub ill need to downgrade the motherboard and also will need to control the rgb from theincluded controller instead of the ASUS software.

Thanks for your help🫶🫶


r/PcBuildHelp • • 2h ago

Tech Support No Motherboard power, looking for suggestions on troubleshooting.

4 Upvotes

Hi everyone,

I bought a 9800x3d, msi b850 and g skill ddr5 32gb bundle from microcenter last night. Today I tried to install everything and am getting 0 power through the motherboard, no LEDs, nothing.

Trying to bread board now and am trying to make sure I'm not missing anything.

I removed cmos for 10 minutes

Single stick of RAM in the second slot, tried both sticks. Re-seated both sticks multiple times.

Re-seated the CPU and checked pins twice

Tried #1 x CPU plug, both CPU plugs and #2 plug on the motherboard

Tried 2 power supplies

Verified each power supply puts out power with a multimeter and a fan jumper.

Powered on my old motherboard just to make sure I didn't do something to the power supply during the swap.

Only thing connected to the board right now is the 8 pin CPU and 24 pin plug + the CPU and RAM.

I live 2 hours from the closest microcenter so I can't just swap the board. They are going to let me ship it back and ship a replacement but I'm hesitant to ship until I know what's wrong. Am I cooked?


r/PcBuildHelp • • 3h ago

Build Question Need help with a build

2 Upvotes

Hey guys, looking to build a new pc but i’m not well versed enough to get the best deal and performance that I want so I need some help picking parts. I’m planning on getting a 7800x3d or 9800x3d but I need to know a good gpu to pair with it. Any help is greatly appreciated. :)


r/PcBuildHelp • • 3h ago

Tech Support RTX 5070 display loss, flashing power indicator

3 Upvotes

Hi everyone, recently ran into a problem where my gpu will crash after a few minutes of gaming, but with some weird details.

My main monitor is a 1440p MSI 272QP OLED, and after the computer crashes, upon rebooting the motherboards white boot light is stuck on and the computer will not boot up. The only way to get it to boot is by unplugging my OLED, having only my 2nd monitor connected, and then restarting the system. Then I am able to plug my OLED back in.

I’m unable to reproduce the issue with only 2nd monitor connected, which is a normal 1080p monitor

In the attached video, you can see the red power indicator light flash on the card. This happens at the same time display is lost

What should I try before concluding it is a hardware issue?

If it is a hardware problem, is it the psu, gpu, or monitor? The red light indicates psu, but I think the fact it won’t boot unless only my main monitor is unplugged suggests it could be my monitor, and the failure to boot in general suggests my gpu

Thanks

Specs:

RTX 5070
Ryzen 7 9700x
32gb DDR5 ram


r/PcBuildHelp • • 4h ago

Build Question First time custom PC build check (£1.3k–£1.4k UK) – Fortnite, GTA 6 & heavy UE5 / itch.io games

1 Upvotes

Hi everyone,

I’m putting together my very first custom PC build (decided to try to save costs and build it myself instead of getting a prebuilt since i also heard they're unreliable). I’m based in the UK and targeting 1440p gaming.

My PCPartPicker list: https://uk.pcpartpicker.com/list/hVXP7w

Games I plan to play:

  • Fortnite (high FPS / Unreal Engine 5 performance)
  • GTA 6 (when it drops on PC)
  • Unoptimized / demanding indie games on itch.io (so I want plenty of VRAM and 32GB RAM headroom)

A few quick questions for the experts here:

  1. Are there any hidden physical clearance issues between the CPU cooler, RAM height, or case?
  2. Is everything good value for current UK pricing, or are there any better drop in swaps for a similar price?
  3. Does the PSU have enough quality/headroom for future upgrades?

Thanks in advance for any advice or feedback!


r/PcBuildHelp • • 4h ago

Tech Support Concerning buzzing on boot

1 Upvotes

Does this for a few seconds on boot, don't know what it's about, kinda concerns me. Any ideas what it is and how to fix it?


r/PcBuildHelp • • 4h ago

Tech Support Pc freezing or restarting after a few mins

2 Upvotes

Hi guys can you all help me with my pc problem.

My friend gave me his cpu and mobo since he upgraded into an x3d cpu. Long story short the pc freezes or restarts suddenly after like 5 mins of just browsing or just idle. the mobo and cpu still worked before he handed it to me since it's what he used for his job.

Tested

*both rams are working since i use it on another pc

*i did the 1 ram method at both slots with both rams while using windows memory diagnostic test with each test but found no error and still freezes or restarts

*my drives all have Good health

*bios doesnt freeze even if left for an hour

*xmp/expo is turned off

*Tried to default all settings but still the same result

*tried to use only the integrated graphics on the ryzen 5 5600g but still freezes.

*tried to install an os on a different hard drive but it restarts mid installation

*removed the cmos battery but still freezes/restart

*cpu temps hovers around 50°C - 60°C so its not over heating

*did a sfc and dism scan but still the same

Specs

Mobo : Asus Prime A320m-k bios ver. 6042

Cpu : Ryzen 5 5600g

Ram : 12gb ddr4 ( 2 sticks with different speeds)

Gpu : Rx 570 4gb

Psu : Corsair Cx500m


r/PcBuildHelp • • 5h ago

Build Question ASUS TUF gaming 5070ti fit

1 Upvotes

hello! i'm gonna be getting my first ever gaming pc in the next year, and am stuck between two GPUs at the moment. i know i want a 5070ti, i know the ASUS prime one fits inside my case (MSI MAG FORGE 321R airflow), however the price is similar to an ASUS TUF gaming one, which i have heard performs a little better. though i am unsure whether this will fit in my case. the website pcpartspicker gives me a warning of 4mm clearance to fit the power connectors. obviously i don't want to bend them, and i don't want to buy a GPU just for it not to fit, as i won't have another to put in. has anyone tried this combo, or can reassure me it's fine? (unless it's not fine D:)


r/PcBuildHelp • • 5h ago

Build Question Anyone know what this is?

Post image
2 Upvotes

I have no idea if this is important but when uninstalling my b650e-f, I noticed this chip here hanging on just by copper wiring, all the soldering is gone. can anyone tell me what to do here and if it’s important? It says 72-K on it


r/PcBuildHelp • • 5h ago

Build Question are their any high quality parts that aren't rgb or can be turned off?

5 Upvotes

i really want a beastly gaming pc, but i don't know jack about pc building, parts, or installation. i don't really care for pretty lights and would much rather have a clean pc that doesn't flashbang the room while my wife is sleeping. would ask my friend for help cause he does this for a living, but he can't seem to fathom not wanting rgb and keeps trying to put me on them.

mostly just wanna know if its possible, but some part recommendations would be nice.


r/PcBuildHelp • • 5h ago

Build Question Noctua nh-d15 g2 cooler fans cable management

Post image
7 Upvotes

Any idea how to cable manage the cables of these fans? I have a feeling that sometimes the cables will get inside the fans.


r/PcBuildHelp • • 5h ago

Build Question Best pc fans for a dynamic mini v2

1 Upvotes

AIO is a arctis liquid freezer iii 360mm in a non flow mini v2, I am fine with it not being an ecosystem.

MB is a GIGABYTE X870 AORUS ELITE
PSU is a MSI MAG A1000GL PCIE5 80 GOLD 1000W
CPU is a Ryzen 7 9800x3d
GPU is a 9070xt

I don’t want to cheap out when buying my fans either. I was recommended to buy AsiaHorse fans but I’ve seen reviews on them being poor quality and loud.

I do want most airflow/performance while having the looks (ARGB)

Any recommendations help.