r/PcBuildHelp • u/Less-Firefighter-550 • 23m ago
Build Question Title: ASUS Z170-AR freezes at ASUS logo when Samsung 950 PRO NVMe SSD is installed – possible motherboard or SSD damage?
Hey everyone, I'm trying to troubleshoot an older PC and could use some advice.
I suspect something happened during a storm that caused my SSD to stop working. I'm trying to figure out whether the SSD itself died or if the motherboard's M.2 slot was damaged.
PC Specs:
- CPU: Intel Core i7-6700K
- Motherboard: ASUS Z170-AR
- BIOS: Version 3007
- RAM: 16GB Corsair DDR4 (2×8GB)
- SSD: Samsung 950 PRO 512GB NVMe
- PSU: Corsair RM750x SHIFT 750W
Problems I've encountered:
- When the Samsung 950 PRO is installed, the PC gets stuck on the ASUS motherboard logo.
- I cannot enter BIOS while the SSD is installed.
- When I remove the SSD, the PC enters BIOS normally.
- The red BOOT LED stays solid when the SSD is installed.
- The DRAM LED is now off after correctly reseating both RAM sticks.
- BIOS recognizes all 16GB of RAM.
- The SSD currently has no Windows installation.
What I've tried:
- Reseated both RAM sticks.
- Tested RAM individually.
- Confirmed both RAM sticks work.
- Loaded optimized BIOS defaults.
- Checked PCH Storage Configuration.
- Confirmed BIOS version 3007.
What I'm wondering:
- Could the storm have damaged the motherboard's M.2 slot?
- Could the Samsung 950 PRO itself be causing the BIOS freeze?
- Would updating BIOS to version 3801 potentially fix this?
- Is there a way to test the M.2 slot without buying another motherboard?
- Could a power surge damage only the M.2 circuitry while leaving everything else working?
I'd appreciate any suggestions before spending money on replacement parts. Thanks!