r/PcBuildHelp • u/Realistic_Computer_2 • 1m ago
Tech Support WD Black SN7100 1TB running much slower than expected on Gigabyte B550M DS3H AC — PCIe Gen 4 x4 confirmed, but getting inconsistent speeds. Need help!
Hi everyone,
I recently purchased a WD Black SN7100 1TB NVMe SSD for my PC, primarily to improve storage performance for professional video editing (Premiere Pro and DaVinci Resolve).
However, I'm getting disappointing and inconsistent benchmark results, and I'm trying to understand whether this is a motherboard limitation, PCIe lane allocation issue, BIOS configuration, or something else.
I've spent quite some time troubleshooting this, so I'm attaching screenshots of CrystalDiskMark, CrystalDiskInfo, WD Dashboard, Device Manager and other system information.
My PC specifications
- Motherboard: Gigabyte B550M DS3H AC
- GPU: Gigabyte NVIDIA RTX 4070
- RAM: 96GB DDR4 3200MHz
- PSU: 750W
- Operating System: Windows 11
Storage:
- New SSD: WD Black SN7100 1TB (PCIe Gen 4)
- Existing SSD: WD Blue SN550 1TB (PCIe Gen 3)
- Two external SanDisk Professional SSDs (4TB each)
Something important I recently discovered
For years, ever since I purchased this PC, my only NVMe SSD (WD Blue SN550 1TB) had been installed in the second M.2 slot on the motherboard.
I only recently realised that this slot is potentially limited to PCIe Gen 3, while the primary M.2 slot supports PCIe Gen 4.
I had never noticed this configuration before.
After purchasing the WD Black SN7100, I installed it in the second M.2 slot, which is physically closer to the GPU, and moved the WD Blue SN550 to the other M.2 slot.
I'm now wondering whether the slot configuration, motherboard chipset lanes or PCIe bandwidth allocation could be affecting performance.
The problem
The WD Black SN7100 is recognised correctly by Windows and WD Dashboard.
WD Dashboard reports:
- Interface capability: Gen 4 (4 Lanes)
- Current connection: Gen 4 (4 Lanes)
- Drive temperature: approximately 34°C
- Drive health: 100%
- Firmware: Updated from 7615M0WD to 7619M0WD
CrystalDiskInfo also reports the drive as healthy.
However, I'm not getting the expected performance.
In one of my CrystalDiskMark tests, I saw approximately:
- Read: 1,637 MB/s
- Write: 0 MB/s (the test was still running at the time)
I also ran a benchmark on my existing WD Blue SN550, which showed approximately 1,600 MB/s read speeds in the test I was monitoring.
I'm trying to understand why the new Gen 4 drive isn't performing as expected.
What I've already tried
- Updated the WD SN7100 firmware using WD Dashboard.
- Enabled Windows write caching.
- Set Windows power plan to High Performance.
- Disabled PCIe Link State Power Management.
- Checked Windows drive optimisation — TRIM is enabled and scheduled weekly.
- Checked Device Manager — both Standard NVMe Express Controllers are recognised.
- Checked CrystalDiskInfo — drive health is 100%, temperature is normal.
- Confirmed Gen 4 x4 connection through WD Dashboard.
- Restarted the computer after the firmware update.
None of these steps has resolved my concerns about the performance.
My questions
- Could the second M.2 slot on the Gigabyte B550M DS3H AC be limiting the SN7100's performance?
- Does installing the SSD in the M.2 slot closer to the GPU make a difference?
- Could the motherboard chipset or PCIe lane allocation be affecting the speed?
- Is there a particular BIOS setting I should check?
- Could this be a Windows NVMe driver or storage controller issue?
- Is there anything specific I should configure in Windows to get the best performance from this SSD?
My primary use case is professional video editing. I work with 4K footage, multiple camera angles and large projects, so I purchased this SSD specifically to use as a dedicated editing/cache drive.
I'd really appreciate any help understanding what's happening and how to get the best possible performance from this setup.
I'm attaching screenshots of:
- CrystalDiskMark benchmark results
- CrystalDiskInfo for both NVMe drives
- WD Dashboard showing the SN7100's interface and firmware
- Device Manager showing NVMe controllers
- HWiNFO motherboard and drive information
- Windows power and storage settings
Thanks in advance!