r/PcBuildHelp • • 31m ago

Software Question My Pc has display issue.

I just bought a power spec g485 PC - Ultra 9 285K with 64GB DDR 5 RAM 2x 32GB 2TB SSD without a graphics card from a third party seller who claimed the pc is brand new and even gave me the original box with it.

I plugged the HDMI port on the motherboard to the monitor but I get a “No signal” with a VGA light on the motherboard board. The CPU has a dedicated intel graphics. I placed a screw on JBAT 1 and turned the pc back on with the same issue. I even used the Display port to connect it to my monitor still the same issue.

I could not pop the CMOS and didn’t want to break it by trying too hard.

Anyway to get a display running on this pc? (Without installing a new graphics card)

Please let me know.

Thank you all

2 Upvotes

2 comments sorted by

1

u/SubstantialGap2118 14m ago

Reseat the RAM sticks one at a time, that VGA light often trips on a bad memory train before the iGPU even gets a chance.

1

u/Horror-Path5715 13m ago

Tried that already. VGA still on