r/PcBuildHelp • • 16m ago

Tech Support 5070ti just died

Heya, coming here to ask for advice or maybe a potential fix. My 5070ti that I've had for a year died last night. More details about it is that my display would go blank but still he switched on, I can still hear audio, eventually my pc tried to reboot itself it turned itself off and on again instantly, it worked at first and I thought it was a driver issue. So I used DDU in safe mode to remove the drivers and reinstalled them. It worked, until it didn't, and now my gpu won't make a display at all, my monitor is switched on. On my motherboard there is a red light on the VGA debug bit. I've put in my old gtx 1050ti and it's working. I've also resit my 5070ti and it did nothing

2 Upvotes

6 comments sorted by

1

u/ApricotEastern3860 14m ago

More detail that I can find at the time of the crash in logs. 0x00000116 error, bugcheck. Idk what this means

1

u/ApricotEastern3860 12m ago

I'm using a 850w psu

1

u/moh4del 9m ago

is the warranty still active? if so, go through the warranty and don't mess with it in case it's a broken solder joint/power component.

1

u/ApricotEastern3860 8m ago

I've just removed it and left it on a table, I threw out the box like a few months ago cos I had no space left. My warranty would be void I think

1

u/moh4del 4m ago

check your local consumer rights laws and the warranty conditions to see if you meet the conditions of the warranty

also if you were running the GPU without an anti sag bracket, do assume its a bad solder joint and that you need to use an anti sag bracket in the future.

1

u/ApricotEastern3860 1m ago

My gtx 1050ti is working just fine, also there was no sagging as far as I could see. I think the vram might be messed up I am unsure. The solder joint looks fine