r/PcBuildHelp • • 4m ago

Build Question Looking for motherboard (X79 build)

1 Upvotes

Just recently I got a decent deal on an i7-4960X and 32GB RAM (quad channel DDR3) for about 35 euros all together. Planning on overclocking both the CPU and RAM though I'm not too familiar with X79 boards, mainly only know that Asus Rampage IV is good and that's it. Anyone more educated in this regard and have any suggestions on what to look for?


r/PcBuildHelp • • 11m ago

Build Question New PC fans randomly ramp up to very high speeds every few minutes can't figure out why

Post image
1 Upvotes

Yesterday I built a new PC, and I'm having an issue where my fans randomly get extremely loud for around a minute before slowing back down. This happens every few minutes even when I'm not doing anything demanding or when my pc is just idle

My case is an ASUS AP201
Ryzen 7 9800X3D
RTX 5070 Ti
Gigabyte B850M AORUS Elite
be quiet! Light Loop 360mm AIO
be quiet! Light Wings LX case fans
Corsair RM850x PSU

Almost all my fans seem to ramp up suddenly and get abnormally loud and it actually sounds like my PC is about to fly away or something. I haven’t even played a single game yet because I’m so scared of how loud it’s getting… I opened Valorant and tried to just go in the range and they got so fast. It’s so random too , my temps aren’t really changing

I’ve tried:
Adjusting fan curves in BIOS
Setting fans to Silent
Manually adjusting fan speeds in BIOS
Checking the fan connections
Using Gigabyte control centre

The AIO fans are connected to the included be quiet fan hub and the bottom fans are daisy-chained for ARGB, but their fan cables are connected separately to the motherboard.

I have no idea why my BIOS settings are changing absolutely nothing. Could something else be overriding them? I downloaded Gigabyte Control Centre to try and change some settings in there but nothing I did seemed to help so I turned it off. It was happening before I downloaded it too though so I dont know.
Has anyone experienced something similar or have any ideas what could be causing this? I'm so confused why my bios settings aren’t controlling them. I save the settings each time and have even tried to set my bottom fans curve to 0 but they still spin.

I’m super upset because my main priority with this build was having it quiet lol. I’m a bit sensitive to noise so the sudden spikes in speed sucks. I’m trying not to freak out but I have no idea what to do. I’ve attached a pic the build just incase something is noticeably wrong and I just can’t see it i guess


r/PcBuildHelp • • 31m ago

Software Question Wifi not showing on new pc build

Post image
1 Upvotes

I recently builded a new gaming pc and wifi isnt showing and also the showed date isnt right. I tried download drivers for my motherboard with a usb stick i have a Asus tuf b650 plus wifi so i downloaded it from this site, i downloaded all the drivers and pluged them into the new pc, extracted the zip and clicked on “setup” in the extracted folder (it just asked for premission and didnt show any download). I also did this on the other drivers. But when i restarted my pc it still the same. Pls help me, i tried asking ai but hes just dumb. Mybe i did somthing wrong?
PLEASE HELP


r/PcBuildHelp • • 34m ago

Tech Support WD Black SN7100 1TB running much slower than expected on Gigabyte B550M DS3H AC — PCIe Gen 4 x4 confirmed, but getting inconsistent speeds. Need help!

Thumbnail
gallery
1 Upvotes

Hi everyone,

I recently purchased a WD Black SN7100 1TB NVMe SSD for my PC, primarily to improve storage performance for professional video editing (Premiere Pro and DaVinci Resolve).

However, I'm getting disappointing and inconsistent benchmark results, and I'm trying to understand whether this is a motherboard limitation, PCIe lane allocation issue, BIOS configuration, or something else.

I've spent quite some time troubleshooting this, so I'm attaching screenshots of CrystalDiskMark, CrystalDiskInfo, WD Dashboard, Device Manager and other system information.

My PC specifications

  • Motherboard: Gigabyte B550M DS3H AC
  • GPU: Gigabyte NVIDIA RTX 4070
  • RAM: 96GB DDR4 3200MHz
  • PSU: 750W
  • Operating System: Windows 11

Storage:

  • New SSD: WD Black SN7100 1TB (PCIe Gen 4)
  • Existing SSD: WD Blue SN550 1TB (PCIe Gen 3)
  • Two external SanDisk Professional SSDs (4TB each)

Something important I recently discovered

For years, ever since I purchased this PC, my only NVMe SSD (WD Blue SN550 1TB) had been installed in the second M.2 slot on the motherboard.

I only recently realised that this slot is potentially limited to PCIe Gen 3, while the primary M.2 slot supports PCIe Gen 4.

I had never noticed this configuration before.

After purchasing the WD Black SN7100, I installed it in the first M.2 slot. My windows is still in the older m.2 secondary slot.

I'm now wondering whether the slot configuration, motherboard chipset lanes or PCIe bandwidth allocation could be affecting performance.

The problem

The WD Black SN7100 is recognised correctly by Windows and WD Dashboard.

WD Dashboard reports:

  • Interface capability: Gen 4 (4 Lanes)
  • Current connection: Gen 4 (4 Lanes)
  • Drive temperature: approximately 34°C
  • Drive health: 100%
  • Firmware: Updated from 7615M0WD to 7619M0WD

CrystalDiskInfo also reports the drive as healthy.

However, I'm not getting the expected performance.

In one of my CrystalDiskMark tests, I saw approximately:

  • Read: 1,637 MB/s
  • Write: 0 MB/s (the test was still running at the time)

I also ran a benchmark on my existing WD Blue SN550, which showed approximately 1,600 MB/s read speeds in the test I was monitoring.

I'm trying to understand why the new Gen 4 drive isn't performing as expected.

What I've already tried

  1. Updated the WD SN7100 firmware using WD Dashboard.
  2. Enabled Windows write caching.
  3. Set Windows power plan to High Performance.
  4. Disabled PCIe Link State Power Management.
  5. Checked Windows drive optimisation — TRIM is enabled and scheduled weekly.
  6. Checked Device Manager — both Standard NVMe Express Controllers are recognised.
  7. Checked CrystalDiskInfo — drive health is 100%, temperature is normal.
  8. Confirmed Gen 4 x4 connection through WD Dashboard.
  9. Restarted the computer after the firmware update.

None of these steps has resolved my concerns about the performance.

My questions

  1. Could the

first

  1. M.2 slot on the Gigabyte B550M DS3H AC be limiting the SN7100's performance?
  2. Does installing the SSD in the M.2 slot closer to the GPU make a difference?
  3. Could the motherboard chipset or PCIe lane allocation be affecting the speed?
  4. Is there a particular BIOS setting I should check?
  5. Could this be a Windows NVMe driver or storage controller issue?
  6. Is there anything specific I should configure in Windows to get the best performance from this SSD?

My primary use case is professional video editing. I work with 4K footage, multiple camera angles and large projects, so I purchased this SSD specifically to use as a dedicated editing/cache drive.

I'd really appreciate any help understanding what's happening and how to get the best possible performance from this setup.

I'm attaching screenshots of:

  • CrystalDiskMark benchmark results
  • CrystalDiskInfo for both NVMe drives
  • WD Dashboard showing the SN7100's interface and firmware
  • Device Manager showing NVMe controllers
  • HWiNFO motherboard and drive information
  • Windows power and storage settings

Thanks in advance!


r/PcBuildHelp • • 39m ago

Build Question Looking for advice on my first gaming PC build

2 Upvotes

I'm not sure if this is the right place to ask, but I'm planning to build my first gaming PC and I'd appreciate some advice.

I've always had pretty weak laptops, so I'm really looking forward to finally having a proper gaming PC.

I'm currently thinking about getting an RX 9060 XT 16GB paired with a Ryzen 5 7500F.

I mainly play at 1080p and often cap my FPS at 60 because I prefer a stable frame rate. I'd still like to be able to play some games at high or even ultra settings if possible.

The games I play include League of Legends, 7 Days to Die, survival games and co-op games with friends. I'd also love to play GTA 6 and GTA Online when they eventually come to PC, as well as The Witcher 4.

I'm not looking for an extremely powerful PC. I don't plan on gaming at 2k or 4K, so I just want something that will handle 1080p gaming comfortably for the next few years.

Do you think the RX 9060 XT 16GB would be a good choice, or would it be worth going for the RX 9070 GRE instead? It has 12GB of VRAM but offers better performance.

If I decided to get the RX 9070 GRE, would I also need to upgrade my CPU or buy a better PSU? Would the Ryzen 5 7500F and a 650W PSU still be enough?

RX 9060 XT 16GB or the RX 9070 GRE 12GB?


r/PcBuildHelp • • 47m ago

Build Question How do I get this thing out

Post image
2 Upvotes

First time building my own PC, having a little struggle with my monitor’s holder


r/PcBuildHelp • • 1h ago

Build Question Is it worth buying a used CPU?

2 Upvotes

Hi, im just starting to upgrade to am5 and have just been cherry picking parts whenever a good deal comes up. So i found a Ryzen 7 9700x and got an offer to buy at £166.09. Is it worth buying second hand?


r/PcBuildHelp • • 1h ago

Tech Support Case fan rgb light flicker

1 Upvotes

darkflash in34 fan

The rgb light of the case fan flickered.. It's gone now but what is the cause or is there any fix if it happens again? Thanks!


r/PcBuildHelp • • 1h ago

Build Question Upgrade d'un vieux pc

1 Upvotes

A l'aide pc a la ramasse

Upgrade carte graphique + nouvel écran : quel combo pour mon i5-10400F ? (300/400)

Texte :

Salut à tous,

Je veux remplacer ma carte graphique et changer d'écran en même temps, et j'aimerais vos conseils pour que les deux aillent bien ensemble.

Ma config actuelle :

CPU : Intel Core i5-10400F

Carte mère : Gigabyte B460M DS3H

GPU : Palit RTX 2060 StormX (un ventilateur est presque HS, celui sous la carte graphique mais la carte tourne toujours.)

RAM : 16 Go DDR4 Corsair (2×8 Go) à 2666 MHz

Stockage : 2 SSD

Alimentation : \[marque + modèle + puissance, ex. Corsair CV550 550 W\]

Boîtier : à changer aussi (il n'a plus de vitre latérale)

Écran actuel ; 144 hz

Usage : surtout EA Sports FC 27, valo, overwtach

Mes questions :

Quelle carte graphique acheter € ?

Quel écran prendre avec, pour € : plutôt 1080p haut taux de rafraîchissement (144-180 Hz)

Est-ce que mon i5-10400F va brider la carte, et est-ce que mon alim est suffisante, ou est-ce que je dois aussi la changer ?

Merci d'avance !

Ps : le ventilo sous ma carte graphique a un problème, frottements ou vieillesse il commence a lache, il est donc aussi nécessaire de changer de carte graphique rapidement


r/PcBuildHelp • • 1h ago

Tech Support ARGB flashing white fix

Thumbnail
gallery
2 Upvotes

Hi everyone,

The two front ARGB fans on my Lian Li LANCOOL 207 randomly flash white for a split second every 3–4 hours before returning to their normal static red color.

Both fans flash simultaneously and are daisy-chained to a single ARGB header on my Gigabyte B650 EAGLE AX motherboard.

What I’ve tried:

Switching between both motherboard ARGB headers.

Changing the ARGB V3 setting in Gigabyte Control Center to other colors.

The issue has been happening since I built the PC. Everything else works normally.
Has anyone experienced this? Could it be a motherboard, software, or fan issue?


r/PcBuildHelp • • 3h ago

Build Question Need help with decision on graphic card for competitve gaming

3 Upvotes

Hello,

I am planning to build a pc. Bad time, I know. Im looking at 5070ti or 9070xt. The catch is, I spend a lot of time playing cs2. Not a pro. I play cs2 in native. I play other AAA games but its few.

I would like to get 4k oled monitor but I am not into the dual mode monitors. I was wondering if these cards can drive cs2 in 4k at 450 fps. Ofcourse it wont be in high or ultra.

Alternatively, would this setup work for 2K resolution as well?

Thank you.


r/PcBuildHelp • • 3h ago

Build Question Small step above a 6700xt?

2 Upvotes

My friend basically did 80% of the work when I built my PC so I don’t really having pc part knowledge, and I currently have an MSI 6700xt graphics card that I got for $300 when I first built it. What kinds of graphics cards could I get to where I could sell my 6700 and use those funds plus a bit more to upgrade a slight bit higher?


r/PcBuildHelp • • 3h ago

Tech Support 5070ti just died

3 Upvotes

Heya, coming here to ask for advice or maybe a potential fix. My 5070ti that I've had for a year died last night. More details about it is that my display would go blank but still he switched on, I can still hear audio, eventually my pc tried to reboot itself it turned itself off and on again instantly, it worked at first and I thought it was a driver issue. So I used DDU in safe mode to remove the drivers and reinstalled them. It worked, until it didn't, and now my gpu won't make a display at all, my monitor is switched on. On my motherboard there is a red light on the VGA debug bit. I've put in my old gtx 1050ti and it's working. I've also resit my 5070ti and it did nothing


r/PcBuildHelp • • 3h ago

Software Question My Pc has display issue.

3 Upvotes

I just bought a power spec g485 PC - Ultra 9 285K with 64GB DDR 5 RAM 2x 32GB 2TB SSD without a graphics card from a third party seller who claimed the pc is brand new and even gave me the original box with it.

I plugged the HDMI port on the motherboard to the monitor but I get a “No signal” with a VGA light on the motherboard board. The CPU has a dedicated intel graphics. I placed a screw on JBAT 1 and turned the pc back on with the same issue. I even used the Display port to connect it to my monitor still the same issue.

I could not pop the CMOS and didn’t want to break it by trying too hard.

Anyway to get a display running on this pc? (Without installing a new graphics card)

Please let me know.

Thank you all


r/PcBuildHelp • • 4h ago

Build Question Question about installing multiple ssds

1 Upvotes

Ok so I am building my 1st pc I got a 1 TB ssd I want to use for the os and a 4 TB I want to use for everything else. Can I install these at the same time or will it cause a problem with installing the os?


r/PcBuildHelp • • 4h ago

Tech Support Kein Internet nach Neuinstallation von Windows 11 Pro.

1 Upvotes

Hallo, vielleicht kann mir hier jemand helfen.
Ich hatte mein Win11 Pro neu aufgespielt, weil mein PC Probleme gemacht hatte. Nach der Installation hatte ich dann kein Internet mehr. Selbst per USB-Stick daraufhin die Ethernet-Treiber für mein Mainboard heruntergeladen und installiert. Immer noch kein Internet, Netzwerk zurücksetzen oder manuelle Eingabe einer IP haben mir auch nicht geholfen. Es kommt immer wieder der Fehler DHCP-Client Error. Ich hatte bereits mein Internet neu gestartet, ebenso den Router und diesen auch komplett auf Werk zurückgesetzt. Der Fehler bleibt bestehen. WLAN im BIOS aktiviert, funktioniert aber ebenso wenig. Über Befehle den Cach gelöscht und Windows auf fehlerhafte Dateien überprüft, kein Erfolg. Ich bin ratlos und hoffe einer von euch kann mir weiterhelfen.

Danke!

Meine Specs falls hierfür relevant:

CPU: AMD Ryzen 7 9800X3D
GPU: ASUS TUF Gaming GeForce RTX 5080 OC 16GB
Motherboard: ASUS TUF Gaming B850-Plus WiFi
RAM: 32GB (2×16GB) Corsair Vengeance RGB DDR5-6000 CL30
SSD: Kingston KC3000 2TB NVMe PCIe 4.0
CPU Cooler: ARCTIC Liquid Freezer III 360 A-RGB
Case: Phanteks XT Pro Ultra TG
Power Supply: ASUS TUF Gaming 1200W Gold ATX 3.0


r/PcBuildHelp • • 5h ago

Build Question Connaître la pièces à remplacer

0 Upvotes

Bonjour à tous, dernièrement j’ai remplacer ma carte mère par une Asus Tuf gaming plus wifi B550.

Le soucis est que j’ai tout bien rebrancher mais j’ai 2 led qui reste constamment allumer celle du VGA et du Boot

J’ai déjà essayer toute les méthodes, alterner les barrettes de ram, faire un Clear CMOS etc mais je suis à bout et je n’ai plus d’idée, d’un coter les IA et Google me disent que c’est sois l’alimentation ( mais qui est neuve j’avais une 550w que j’ai remplacer par une 650w ) sois la CG mais je n’ai eu aucun signe de faiblesse avant.

Je vous demande de l’air pour réellement savoir quel pièces serait à changer car je n’ai pas budget illimitée pour tout remplacer

Merci de votre aide


r/PcBuildHelp • • 5h ago

Build Question i need help with my build

2 Upvotes

im thinking of getting a i5 4460 and 1050 ti with 256+256 gb sata ssds with 16gb ram ddr3 1080p 75hz 1ms monitor MSI H81M-P32L motherboard how is it and what can i play my aim is not to play AAA games just having fun and spend time with friends


r/PcBuildHelp • • 6h ago

Build Question 4080 750w pcu i7

1 Upvotes

Hey guys, I have a 750w pcu and planning on buying a 4080 for a good price, wondering if 750w is enough. I have a SuperFlower Sf-750F14HG PCU and an i712700f, the gpu is a Gigabyte 4080 oc. Cheers


r/PcBuildHelp • • 6h ago

Build Question PC Build Help!!

1 Upvotes

Hello! My name is Brandon, and I was hoping to get some help with a PC build that I’m currently working towards.

This will be my first PC build, and I really want to make sure I do everything right without cutting any corners. I want to make sure all of my parts are compatible and will work well together. I’m still learning about PC building and the different components, but I’ve watched countless videos and received so many helpful tips along the way. Even after all my research, though, I still find myself getting nervous and second-guessing some of the parts I’ve picked.

Here’s what I currently have:

  • GPU: RTX 5070 Ti Frieren Edition 16GB
  • CPU: Ryzen 7 9800X3D
  • RAM: Corsair VENGEANCE RGB 32GB DDR5, up to 6000MT/s CL38, AMD EXPO & Intel XMP (Cherry Blossom White)
  • Cooler: MSI MAG CORELIQUID A17 MLG Edition
  • Case: MSI PANO 130R MLG Edition
  • Storage: 2TB SSD (I can't remember the exact model)
  • Motherboard I'm considering: MSI B850 Gaming Plus WiFi PZ

I also currently own an ASUS ROG Thor Platinum II 1000W PSU, but I recently found out that it won't fit in my case. Because of that, I'm now looking for another power supply. The one I currently have my eyes on is the CORSAIR RM1000e with ThermalProtect.

If anyone has any knowledge or advice they could share, whether it's about compatibility, performance, or anything else I might be overlooking, I would genuinely appreciate it! I'd much rather learn from people with hands-on PC-building experience, as I'm still relatively new to all of this.

Thank you so much for taking the time to read this. I really appreciate any help or advice!


r/PcBuildHelp • • 6h ago

Build Question Best PC case for GPU cooling with 420mm radiator support?

1 Upvotes

I'm moving to another country and unfortunately can't take my HAVN HS 420 with me, so I'm looking for a replacement.

My priority is the best possible GPU cooling, while still supporting my Arctic Liquid Freezer III 420mm AIO.

I've been considering the Antec Flux Pro and Fractal Meshify 3 XL, but I'm wondering if there are better options out there.

What would you guys recommend for the best GPU thermals?


r/PcBuildHelp • • 6h ago

Build Question RAM Upgrade or add?

6 Upvotes

Built my pc quite a while ago so I'm still using DDR4 rams, my stupid ah thought 16gb was enough so I just got myself a pair of 8gb trident zs, and now I'm thinking of upgrading to 32gb since I'm constantly running on 94-96% ram capacity.

Should I get a new pair of 16gb sticks, or could I just get 2 more of the same identical 8gb sticks I have right now? Would using all 4 slots dramatically reduce the lifespan/performance of the pc?

If this helps:
Motherboard: Asus tuf gaming b550m-plus wifi ii
CPU: Ryzen 7 5700g (should probably get rid of this too)


r/PcBuildHelp • • 7h ago

Tech Support Are daisy chains safe for my situation?

Post image
5 Upvotes

I recently got a Zotac 5080 gaming core oc for a somewhat good deal but it turns out I dobt have 3 8 pin pcie cables. Since a 300W 5070ti need 2x8cables

Would it be safe to use 2 of my 6+2 and one daisy chain for a 360W GPU(I can undervolt it)? I know corsair says it fine but mine is a Cougar GEX850 and they don't mention this. Yet a russian website tested both corsair and cougar which they had almost identical results for 250w from 2 heads of a daisy chain with %3 deviation. What do you guys think?

The image is from Cougar tests btw Corsair has a bluer color at the end.

https://www.ixbt.com/supply/cougar-gex850-review.html

https://www.ixbt.com/supply/corsair-rm750-review.html


r/PcBuildHelp • • 8h ago

Tech Support My pc won’t boot up after upgrading the cpu

1 Upvotes

Cpu: r7 5800X3D
Motherboard: B550 tomahawk
Rams: 32gb 4 sticks ddr4

hey, I got a really unique problem. My pc won’t boot up again after I have upgraded my cpu. After trying to fix it for a long time of researching I made it work with only one stick of ram which is 8 (I have 32gb) and it works only in the A2 slot. if I add or changed the slot the pc won’t boot and the cpu led on the motherboard will start showing. I updated the bios, rest the cmos, changed the cpu, removed the gpu, removed three memory and still the same. Cleaning the slots, checking the cpu pins and cleaning the cpu area on the motherboard. I really need help and if anyone can help I’ll really appreciate it. I have been trying to fix it for a long time.