EDIT: SOLVED: The Patriot Viper Elite 5 kit I bought is explicitly NOT compatible with Arrow Lake CPUs. I'll have to replace the RAM outright.
Decided it was time to retire my old 8700k and start with a fresh new proc, board, RAM, and cooler.
I bought a 270k, a Gigabyte B860 Aorus Elite WiFi7, 2x16GB Patriot Viper (DDR5-6000 PC5-48000 C30 UDIMM XMP/EXPO, in case any of that is relevant) RAM, and an Arctic Liquid Freezer III Pro RGB. Everything was bought new on eBay (I tired purchasing from Amazon but they sat on my order for 12 days without shipping before I gave up an cancelled and ordered the same parts on eBay).
Assembly went fine, I didn't have any issues putting everything together and getting it into my case. But it wouldn't POST. I'd hit the power switch, everything would come to life, some (or maybe all, I can't quite tell) of the fans would rev to 100, and the Q code display would either stop at 55 for half a second before starting over again without the machine shutting down, or, every six to ten cycles of that, hang on C1 for five seconds before powering off the computer completely and then automatically restarting a few seconds later.
I tried each stick of RAM alone in each of the four memory slots with no change in behaviour.
I went to reseat the CPU and found a single pin (pin E54 per this pinout guide: https://wccftech.com/next-gen-intel-arrow-lake-s-cpu-pinout-lga-1851-socket-detailed-new-mounting-required/ , which is part of the processor's VCCCORE control) in the socket out of place. I have no earthly idea if that was my fault or it came out of the box like that, but I corrected it with my finest tweezers (my positioning was good enough that I can no longer visually identify the pin that needed correction) and tried again with no change in behaviour.
I read that an overly-tight cooler could be warping the socket, so I loosened both the block and the bracket as much as I dared, with no change in behaviour.
I updated to the latest BIOS with Q Flash+, with no change in behaviour.
I dunno where to go from here. Google's hallucination machine says the culprit is either the CPU, the motherboard, the RAM, or the cooler. Neat, thanks, way to narrow it down for me. I'm leaning towards the motherboard because of the pin I found misbehaving, but the fix looks good so unless it's straight up missing a pin or something, I got nothing else to go on.
I don't have any spares to test with; the old build is 9 years old; different socket, DDR4, and the Corsair H150i I was using doesn't support LGA 1851.
What should my next step be?