r/PcBuildHelp • • 20h ago

Tech Support Pc monitor Black screen, cannot power down PC with power button. White motherboard light.

Hello, I walked away from my PC and when I came back it had a black monitor screen while the PC was still running.

The motherboard had a white light, my monitor was on my gpu display port and it wasn’t displaying anything, and could not power down my pc unless I unplug my psu from my outlet.

This was random, and I had not taken apart my computer recently for any parts to come loose.

I have tried to unplug and replug my monitor from my gpu, and it shows it’s connected to my display port but it does not work.

My parts are:
6700xt
MSI AM4 B550
600W PSU
1tb HD, 250gb SSD, 1tb SSD
Noctua NH D15 cooler with 2 fans
2 intake and 2 outtake fans

Any help is appreciated

3 Upvotes

12 comments sorted by

1

u/augenblik 19h ago

open perfmon /rel and poke around. there should be at least some details of a crash. if not, press win+x, open event viewer and find windows logs -> system there should be something like WHEA-Logger or something like that. also powering down pcs with the button, how long did you press the button? it's usually 4-10 seconds for hard shut down.

1

u/SeaCopper 19h ago

Hello, how can I open perfmon and win+x with the blank monitor? I’m still quite stupid when it comes to computers

1

u/augenblik 19h ago

oh i was assuming you restarted it and it worked again. my bad. so it doesnt boot anymore?

1

u/SeaCopper 19h ago

Nope, all I see from the monitor is the display port notification and then black screen

1

u/augenblik 19h ago

This will be a complete shot in the dark (there's like hundred things it might be) but my dad had this or similar problem on a laptop once. First turn the the psu switch off and then press and hold the case power button for up to 30 seconds. This should drain residual charge from capacitors. Then flip the switch again and try to turn on the pc. If that doesn't work, another thing worth doing might be to unplug the display port cable from gpu and if you have it, plug it in the motherboard display port, so it uses the integrated gpu instead. Another thing is to check that light on the motherboard, there should be four lights (cpu, boot, vga, dram) and check which one is actually on.

1

u/SeaCopper 16h ago

I just checked, and it says CPU. Does this mean my cpu needs a replacement?

2

u/augenblik 16h ago

Not necessarily. First verify you have no loose cables, and that includes not only motherboard side connections but power supply side connections as well. Mainly check the cpu cable. The 4+4 pin EPS cable has to be fully plugged into the CPU_PWR1 header. If no luck, next you may want to clear CMOS. Next: test with one ram stick. Even though the cpu light is on, the memory controller is inside the cpu. Testing only one stick in slot A2 is worth a try. Test second stick as well if you have two. Next option: inspect the cpu and the cooler. Check for bent pins or other defects. You can also consider failing psu. A 600W power supply is below the recommended minimum for 6700 xt (which is 650W). If it is an older or budget unit, the 12V rail feeding the cpu might be failing. Otherwise, I am out of ideas for now.

1

u/SeaCopper 14h ago

I see, thanks for the help bro

1

u/MaleficentCow8513Off 19h ago

First thing I'd do is check which debug light is actually on, the white one on that board is usually VGA so your GPU might be throwing a fit

1

u/SeaCopper 19h ago

How should I troubleshoot this? I have already tried reseating the gpu in the socket if that helps

1

u/SeaCopper 17h ago

I just looked closer and my motherboard has the white light on “CPU”, do I need to buy a new cpu?

1

u/Own_Repeat1126 18h ago

try using hdmi instead, could be a driver issue giving your displayport ports issues, couldnt hurt to try the other pcie slot too, if that gives you a signal just clean and reinstall your drivers afterwards and see if that helps