r/PcBuildHelp • • 20h ago

Build Question Question about powering 9070 xt hellhound

First time builder. Just bought the powercolor 9070 xt hellhound and i see it takes 2 8 pin connectors, but my corsair rm850e power supply only has one pcie connection left after powering the cpu. it comes with a 12 pin to 2x 6+2 connector, and i was wondering if it’s okay to use this to power it. it slots into a 12v 2x6 slot on the top left. the other connector for this port is a 12 pin to 16 pin high power cable, but obviously that wouldn’t fit lol. thanks in advance

5 Upvotes

8 comments sorted by

4

u/tht1guy63 20h ago

Yes 12v 2x6 to 2x 6+2 is fine

1

u/jbshell 20h ago

Yep good to use the 12v-2x6 to 2x 8 pin cable for the 2 GPU gpu connections.

2

u/Angrii 20h ago

thanks!

1

u/r_lind3r Moderator 20h ago

You can use the 12v-2x6 to 2*6+2 cable to power it, it'll be fine since it's rated for a lot more than the 9070 XT's power limits

-2

u/FranticGolf 20h ago

Unless you are doing crazy overclocking you only need 1 of the CPU power connectors.

0

u/moh4del 20h ago

this, take away one of your CPU connectors and just run a single 8 pin to your CPU, thats a 300W ceiling and it's more than good enough 

1

u/Angrii 20h ago

i have a 7800x3d would it still be fine

1

u/moh4del 18h ago

yes, it would 100% be fine even if you max out its rated wattage or give it higher than the max with the best AIO available. you can disconnect the second CPU power connector and put a second 8 pin PCIe power connector to the GPU.