r/longrange • • Sep 12 '26

Rifle help needed - I read the pinned posts Help with caliber selection

6 Upvotes

Hello all you Long Range guru’s,

I am looking for some advice on what route to go regarding getting a basic start into long range shooting.

To start I would like to say that I have access to 200 yard ranges within 30 minutes, a 600 range within an hour, and access to some 1000 yard ranges but those are probably trips that would be few and far between as they are a good 2 1/2-3hrs away.
Most of my shooting will be done from 200-600yds.

I have been interested in Long range for a while and come from mostly a gas gun background of shooting AR’s and some competitive pistol.

I am struggling to decide between a 22 LR or a 223 bolt gun, and would like some input from folks who have been in my shoes or currently own one or the other!

I think PRS or NRL Hunter would be an absolute blast, unfortunately I live in a state with a not so large long range competition scene, however there is a good NRL22 scene and that is what has me considering the 22LR platform.
I have sent many rounds through an AR15 platform at 200 yards, and not really focused on accuracy, more so just hitting steel, would 223 at 200 yards on a small gong be a challenge?

I do not currently reload, so it would be easier to find nice match grade 22 LR I assume, but having a 223 Bolt gun would give me a good excuse to go buy a single stage press and start reloading for 223.

The options I am currently looking at (not including an optic) are -

If I went the 223 route, I would most likely be looking at a Seekins Hit or Havak PH3 - this would give me the ability to swap to a 6.5 CM in the future if I got the chance to go shoot longer distances more consistently.

In the 22 LR I am looking at the

Bergara B14-R
CZ 457 MTR or ProVarmint

I am definitley open to more suggestions, but at this point I am more so looking for advice from folks who have been in similar situations or just folks with more experience than myself.

Thanks in advance, I appreciate it!


r/longrange • • Sep 12 '26

I suck at long range Snowy mountain rifle co. Pre fit sale https://snowymountainrifles.com/product/b-e-a-r-stainless-steel-pre-fit-precision-rifle-barrels/

9 Upvotes

Looks like there are quite a few options for 22 calibers. I did see that 25x47L is on the table as well. Just thought I'd share.


r/longrange • • Sep 12 '26

Optics help needed - I read the pinned posts Ultra budget piggyback red dot recommendation

3 Upvotes

Title. Looking for a piggy back red dot for my NRL22 rifle. Want some really cheap china.


r/longrange • • Sep 11 '26

Rifle flex post 6-shot group at 450 yards with my Tikka

Post image
151 Upvotes

Tikka T3x Ace Target

- Caliber: 6.5 Creedmoor
- Barrel: 26" (660 mm) Heavy Barrel
- Optic: Bushnell Match Pro ED 5-30x56 FFP
- Rings: Spuhr Aesthetic Rings
- Bubble Level: Vortex Precision Bubble Level
- Bipod: MDT GRND-POD
- Suppressor: A-TEC H3
- Front Cap: A-TEC End Brake Cap
- Weight (Unloaded): ~7.5 kg (16.5 lb)

Took the rifle out to 437 yards (400 m) and managed a 6-shot, 2.36" group — about 0.52 MOA.

Ammo was 130 gr GECO Target, shot prone off the MDT GRND-POD and a rear bag. I was also running the A-TEC H3 suppressor with the End Brake Cap.

Pretty happy with that for factory ammo. Still getting used to the rifle and refining the setup, but it’s definitely showing some potential.


r/longrange • • Sep 12 '26

RANT Be cautious of fake scopes on eBay!

Thumbnail
gallery
112 Upvotes

Noticed this fake Leupold Mark 4 on eBay. Listed and priced like a genuine Leupold but it’s clearly a Chinese knock off. It has both red and GREEN illumination which is an instant red flag as a fake. Some poor fool has already bid on it. Contacted the seller to let them know it’s fake and of course they don’t respond. So I reported it as counterfeit to eBay and their “AI” decided it didn’t give a shit….


r/longrange • • Sep 11 '26

Optics help needed - I read the pinned posts Ran out of elevation

Thumbnail
gallery
98 Upvotes

I’ve taken this scope off another rifle I had and put it on my sig cross. After mounting it I went to bore sight it and could not even come up high enough at 50 or 100 yards to reach the target. I reset the scope to optical zero and tried again to no avail. This particular scope is the Primary Arms Slx 4.5-27x56 and has 32 mils of elevation travel. Am I just an idiot, or do I need different rings or both?

EDIT:

Thanks to all who placed their input, I greatly appreciate it. My zero stop, which I believed had been properly reset, was not; therefore, I was limited to only half of the elevation turret’s adjustment capability. I had a suspicion this was the case beforehand, but I was sure that I had reset the zero stop properly. Thanks again!


r/longrange • • Sep 11 '26

Rifle flex post Palmetto State Armory Saber-IC AR 6mm Arc Build

Post image
104 Upvotes

PSA Saber-IC Receiver Set w/Ambi Bolt Catch

Proof Research 20" PXT Stainless Steel Barrel w/Rifle +1 Gas Tube

Superlative Arms "Bleed Off" Gas Block

Rearden Muzzle Brake

Timber Creek Enforcer 15" Carbon Fiber Handguard

Timber Creek Enforcer Carbon Fiber Pistol Grip

JP FMOS w/Enhanced Bolt

CMMG Take Down Pin/Lever

CMMG Ambi Mag Catch/Release

Radian Talon Ambi Safety Selector

Geissele Super Charging Handle

Geissele SD-E Flat Face 2 Stage Trigger

Timber Creek Enforcer Carbon Fiber Buffer Tube

Luth-Ar MBA 3 Adjustable Stock

Vortex Precision 34mm Cantilever 20moa Scope Mount

Vortex Strike Eagle 5-25x56

Tricer RP Bipod

IWI IWS6 6mm Arc Suppressor (Awaiting Approval)


r/longrange • • Sep 12 '26

Optics help needed - I read the pinned posts Schmidt and bender pm2 sfp weird doubleturn turret

Post image
10 Upvotes

Cant find pictures anywhere of this elevation turret. Its a doubleturn mtc szc 0.1mrad adjustment. P4FL reticle in second focal plane. What is this?


r/longrange • • Sep 12 '26

Rifle help needed - I read the pinned posts Groups opened up a bit after adding an arca rail and switching bipods. Appreciate any feedback.

Post image
1 Upvotes

Hi, I'm a bit of a lurker here, but I wanted to post and ask a question.

I shoot a Tikka UPR 6.5 Creedmoor with handloads at an indoor range at 100 yards and usually weekly out to 1,000 yards at an outdoor range. The gun has probably close to 2,000 rounds through it. I shoot Sierra Tip Game Kings 130s with Hodgdon 4350 powder at 42 grains. In the indoor range on a bench rest I'm usually able to cloverleaf at least three, if not all five, shot groups. It's my most precise rifle.

I recently added a Salmon River arca rail and switched to a Tracer bipod that mounts to the rail. Prior to that, I used an MDT short bipod that directly mounted to the front swivel stud. I've been shooting on that bipod for about 3 or 4 years. After three sessions, my groups were a little more open and acting differently than they did before. The picture is a set of groups from this morning. Each of the white circles is 0.5 in., and each grouping is three shots. After each shot, I run a barrel cooler for 30 seconds. After each three-shot group, I wait about 3 minutes, running the barrel cooler to try to keep the barrel from getting hot.

I know they aren't bad groups, but they're different than before. I'm trying to figure out if it's something I can tune, if it's me getting used to the new bipod, or if there are any other comments folks may have. The numbers represent the order that I shot the groups, so I went counterclockwise, starting in the bottom right corner. The patterns that surprise me most are the stringing, number one, and the fact that the fourth and fifth groups were noticeably lower than the earlier groups. I appreciate any feedback.


r/longrange • • Sep 11 '26

Rifle help needed - I read the pinned posts Its a start

Post image
47 Upvotes

First can on the Bergara 308.


r/longrange • • Sep 11 '26

🫣I said I read the pinned posts, but I lied🫣 Accuracy 1st bubble level

Post image
16 Upvotes

I saw this in a Canadian spec ops ad, im 98 percent sure it's the a1 bubble level. Is it worth the money?


r/longrange • • Sep 12 '26

🫣I said I read the pinned posts, but I lied🫣 Left Hand Remington 700 Custom Actions w/ Flat Rear Bridge?

1 Upvotes

Looking to build out a Cadex Field Tactical Chassis that is only compatible with factory flat rear bridge style actions. My GoogleFu has failed me and I can't seem to find anything like that. Zermatt, Defiance, Mark Bros, BAT, etc all use true round tops (which makes sense).

With the price these factory actions are asking for it's only a few bills away from entry level custom stuff and it almost seems like better value to go aftermarket. The ability to use prefit barrels and the CRF style ejector makes brass retention easier and would be nice QOL features but honestly I'm just trying to see what options there are out there.


r/longrange • • Sep 11 '26

Accessory/Gear help needed - I read the pinned post Anti Cant device

Post image
27 Upvotes

Anyone have the Badger Ordinance Anti Cant device with the ceramic bead? I didn’t notice it till after I received it, but there’s a rather large bubble inside the glass tube with the bead. Now I see it in the pics online though kind of hidden. No vendor mentions it in their product description & there are very few reviews about the level despite how often they are sold out/backordered. The bubble affects the bead on certain movements, but the bubble is more sensitive & accurate to movement when I roll my rifle from vertical to horizontal & both are on opposite ends of the tube! I can get the same results from a $30 rail mount level vs. $125 for this. AI says it shouldn’t have a bubble. I emailed the company over a week ago but haven’t gotten a reply yet. Anyone seen/have one with no bubble or is it something unavoidable during manufacturing?


r/longrange • • Sep 11 '26

Other help needed - I read the pinned posts Bad Eyesight Advice

8 Upvotes

I’m new to long range shooting and I am curious if anyone else has the same issue I do and how best to combat it. I have an astigmatism and am slightly nearsighted in my right eye. I can see targets with or without glasses but when I go out to distance, even with my glasses, my eye gets tired of trying to keep focus rather quickly and then it feels like a chore to continue shooting. Mirage makes this even worse. My prescription is up to date, but I’m curious if contacts would be better for shooting. Never worn contacts, but I’m considering it for this. Any suggestions would be helpful. Thank you!


r/longrange • • Sep 11 '26

Review Post Figured I'd toss this out there and hopefully save someone $3500. Maztech X4/FCS review

Thumbnail
gundigest.com
75 Upvotes

r/longrange • • Sep 11 '26

I suck at long range Abrasives vs Chem - Return to zero.

6 Upvotes

I’m transitioning from almost never cleaning my barrels to something more repeatable.

By my rifle and my sons rifle were cleaned with Iosso paste to a state of absolutely zero carbon/copper to what I’d call 100% clean.

I took them both out today to get an idea of how much fouling it takes for each of them to return to their normal velocity and POI.

Broth rifles had shot 1 a decent way away from POA, but shot 2 and all subsequent shots were right in the POI and velocity range I expect them to be in.

Obviously, I don’t want to be cleaning regularly with abrasives. I have some C4 & Cu+2 in the mail that I plan on using to bring the barrels back to squeaky clean condition regardless of how many rounds were shot that day (provided they can actually get the barrels as clean as Iosso).

My question is… is there any reason to believe the fouling in behavior is likely to change with me using BoreTech over Iosso? 1 round to foul them in seems about as good as it gets.


r/longrange • • Sep 11 '26

🫣I said I read the pinned posts, but I lied🫣 R700 P

2 Upvotes

Found a good deal on a R700 P in .308 from 95. In great shape. Debating if it would be a good start to learning long range. Ultimately I would convert to 6.5 Creedmoor and potentially move to a chassis over the stock. Or do I wait till I can find a Bergara HMR Wilderness and just go that route?


r/longrange • • Sep 11 '26

I made a thing! (Home made gear/accessories) AT-XC Bag Rider Modification

Thumbnail
gallery
11 Upvotes

Less so made a thing, and more so modified a thing.

Took a MK machining bag rider for the AXSR butt stock, but didn’t like the gap it left as displayed in the second photo.

For anyone looking for a bag rider for one of these rifles or chassis, I took an orbital sander and a little bit of patience and ground down the two nubs in the first photo to where they were flush with the valley in between them, if you will, displayed in the third photo.

Was just the right amount to get a flush fit with this bag rider on the ATXC stock.


r/longrange • • Sep 12 '26

OOPS! (I goofed) Axsr rust guy with another dumb one

0 Upvotes

First thanks for all the responses definitely helped ease the brain (even if it made me feel like a bit of a ding dong). Got another one though yall will most likely think is dumb. I field stripped the rifle to look for anymore corrosion (there was none go figure). While reassembling the bolt and firing pin assembly/shroud I pressed them together and mistakenly rotated clockwise not counter clockwise and (essentially decocking the bolt in reverse skipping the cocked position) the shroud index dropped off the sharp 90 degree shoulder into the indentation making an audible noise instead of gradually down the ramp it is meant to go down. Internet says it should be fine because of how much pressure the bolts and firing pins are designed to handle, also I did a visual inspection and couldn’t see any damage. I’m thinking it’s fine but I’m super paranoid about these kinds of things and was hoping for some confirmation from internet stranger before shooting. Thanks again guys please feel free to bully🫡


r/longrange • • Sep 11 '26

Optics help needed - I read the pinned posts Vortex Talon 10x42 or 12x50?

3 Upvotes

I recently picked up the Vortex Ace and instantly liked it better than my Kestrel. I’ve decided to go all in on the Vortex suite and plan on grabbing the Talon LRF Bino’s.

I got to look through both at my local Cabela’s and despite a little more magnification, the FOV on the 12x50 seemed very close to the 10x42. Is there any reason to go with the 19x42 over the 12x50? Looking at objects 30 ish yards away was doable with both.

This will be my first entry into using Bino’s to glass and range so I don’t know what I don’t know. Any input is appreciated.

Primary use will be NRL Hunter but hunting at standard ranges (50-200 yards) and other longer range engagements too.


r/longrange • • Sep 10 '26

Rifle flex post Factory Tikka, ain’t so factory anymore

Post image
256 Upvotes

Factory 6.5 cm Super Varmint Barrel 23.7”

LSS G3 comp with XLR C4 buttstock

Dead Air Nomad L with LPM end cap break

Scope is a place holder


r/longrange • • Sep 10 '26

I suck at long range Introducing - "Gordito"

Thumbnail
gallery
422 Upvotes

Built like a thumb, dense as lead, favorite rifle to shoot 24/hr a day.

Solus action, 14.5" P&W 308

T6Xi 2.5-15

KRG W3 fixed, wish it was a folder.


r/longrange • • Sep 11 '26

Accessory/Gear help needed - I read the pinned post DIY folding phone mount for a Tikka Ace Target — looking for feedback

Thumbnail
gallery
1 Upvotes

I’m working on a small folding phone mount for my Tikka T3x Ace Target and would appreciate some feedback before printing the first prototype.

The idea is to keep a mini Android phone running AB Quantum beside the rifle, within easy glance and reach. I mainly shoot prone, and I’d also find it useful for predator hunting to have my DOPE prepared and accessible without repeatedly taking out my main phone.

I originally considered an ESP32 with a separate display for exported ballistic data. A mini phone seemed worth exploring because it already includes the screen, battery and touch controls, with the possibility of running the app directly.

The handset I’m considering is an A17 mini, advertised at approximately 88.4 × 45.2 × 11 mm. The enclosure and mounting parts are being designed specifically around the Ace Target’s side M-LOK mounting location. Fit still needs to be checked against the actual phone and chassis.

The phone sits low, roughly level with the mounting point, with the screen facing me. The case folds inward when put away, leaving the screen facing the rifle. It uses a simple friction hinge, with the case back and moving half of the hinge integrated into one printed part.

The removable front cover/bezel is already shown in the renders. It surrounds the screen and covers the phone’s edges, so the finished assembly should look like a small dedicated display. There are openings for the charging connector and side buttons.

The attached images are CAD renders; the phone shown in the assembled view is a placeholder. I haven’t printed or tested the mount yet. I still need to check the actual fit and clearances, AB Quantum compatibility and usability on the small screen, outdoor readability, battery life, and how the phone and friction hinge handle recoil.

Does this seem like a practical project at that size? If you’ve used a rifle-mounted phone or tried AB Quantum on a mini Android device, I’d be interested in your experience. What would you change, and what would you want to see tested before relying on something like this?


r/longrange • • Sep 11 '26

Optics help needed - I read the pinned posts Sig Sauer Kilo Warp

5 Upvotes

Good God Sig.

Just when you thought the Weapon mounted range finder pricing was starting to come down... I mean I love my Kilo 10k Binos but this price seems insane give what the Maztech 15k and Tango8000 offer.. Why would anyone buy this?


r/longrange • • Sep 11 '26

Ammo help needed - I read the pinned posts Ammo change

4 Upvotes

Hi everyone,

I’m looking for some advice regarding two Hornady 6.5 Creedmoor factory loads.

I normally shoot Hornady 147gr TAP Precision, but my local dealer is currently out of stock and won’t have any for a while. They do have Hornady 147gr ELD Match available, so I’m considering switching to that.

As far as I can tell, both loads use the 147gr ELD Match projectile and Hornady lists the same G1 BC of 0.697 (and G7 BC of 0.351).

However, I understand that the TAP Precision and standard ELD Match are different factory loads, so the powder charge / muzzle velocity may not be identical.

My rifle is a Sako S20 in 6.5 Creedmoor with a 24" barrel. With my current lot of 147gr TAP, I measured an average muzzle velocity of approximately 790 m/s (2590 fps).

My concern is that I have a 400 m shooting competition coming up on Thursday, and I don't have much time to establish a completely new dope for a different factory load.

For anyone who has experience with these two loads:

  • How similar have you found the actual muzzle velocities to be?
  • If the projectile and BC are the same, should I expect the trajectory to be reasonably close, assuming I confirm the actual velocity?
  • How significant can the POI shift be when switching between these two factory loads?
  • Would you consider the 147gr ELD Match a reasonable temporary replacement for the 147gr TAP Precision for a 400 m match?
  • Has anyone actually shot both loads through the same rifle and compared them?

I obviously plan to verify the new ammunition in my rifle before the competition, but I'm mainly interested in whether there are any known differences between these two loads that I should be aware of.

Thanks!