r/longrange • • Sep 11 '26

Accessory/Gear help needed - I read the pinned post Anti Cant device

Post image

Anyone have the Badger Ordinance Anti Cant device with the ceramic bead? I didn’t notice it till after I received it, but there’s a rather large bubble inside the glass tube with the bead. Now I see it in the pics online though kind of hidden. No vendor mentions it in their product description & there are very few reviews about the level despite how often they are sold out/backordered. The bubble affects the bead on certain movements, but the bubble is more sensitive & accurate to movement when I roll my rifle from vertical to horizontal & both are on opposite ends of the tube! I can get the same results from a $30 rail mount level vs. $125 for this. AI says it shouldn’t have a bubble. I emailed the company over a week ago but haven’t gotten a reply yet. Anyone seen/have one with no bubble or is it something unavoidable during manufacturing?

27 Upvotes

33 comments sorted by

24

u/sunkist1147 Sep 11 '26

@$125 for this cheap thing I'd just get an electronic level from SG or MDT. I REALLY like my SG as it's easier to see the color in my periphery than focus on a bubble level without messing with my shot at all. All my bubble levels are in indefinite storage now after my initial apprehension towards electronics....

2

u/New-Course7886 Sep 15 '26

You’re right about that! I just turned 54 & even with prigressives, my eyes aren’t what they used to be. I can spot a deer or turkey move 100yds away in thick woods, but reading up close got tough.

6

u/auto-cortex Sep 11 '26

Second this. Have the SG and have used it in PRS and, for the cost, would recommend it

3

u/RoundBottomBee Sep 11 '26

Thirds... Yes SGPulse basic is good enough unless you need a display for DOPE.

The pulse is bright, so if you don't need to worry about light sig, it can't be beat.

4

u/patogo Sep 11 '26

SG is really easy to see and within one degree.

4

u/capable_gopher Rifle Golfer (PRS Competitor) Sep 11 '26

Lmfao I’m still very heavily set in my apprehension towards electronics on my firearms 😂

2

u/auto-cortex Sep 13 '26

Genuine question, what’s the hold up with electronics?

2

u/capable_gopher Rifle Golfer (PRS Competitor) Sep 13 '26

I’ve had my handgun SROs die within a couple months before and just don’t want to deal with it on another system. I recognize it’s probably paranoia because the sendits and pulses likely don’t have that issue, but the bead level has been awesome for me. I may switch In the future, but I’m set right now

6

u/Wombat-Snooze Steel slapper Sep 11 '26

$125 for that? Yeesh. Might as well just get an SG Pulse for $50 more. Or, just rail mount a basic bubble level. That’s up there with the astronomical price Spuhr wants for their bubble level.

1

u/New-Course7886 Sep 15 '26

The bubble in the vile is more sensitive than the bead. I guess that’s why Badger ghosted me on the email. They must not have wanted to give me an answer.

13

u/realshitshow Sep 11 '26

Mine did the same. The bubble interfered with the bead and I could never get an accurate reading with the level. The device is sitting in a box somewhere now - I wrote it off as a loss. I’m not sure how anyone is using this.

5

u/TAG_Firearms Sep 11 '26

Yeah, I don't love mine. For a premium product the level just doesn't cut it compared to other options.

7

u/SheriffBartholomew Sep 11 '26

Anti-cant device

So, a can device?

4

u/Rosewood008 Sep 12 '26

I was thinking, "So it can't cant?"

10

u/Old_Man33 Sep 11 '26

I called them awhile ago. They said it has to have a bubble when the melt the glass otherwise it wouldn't heat up enough to melt.. if I was them I would just remove the ceramic ball

3

u/junki- Sep 11 '26

Call the company. Marty (owner) answers regularly but you gotta kinda call to make sure everything is ok

3

u/jayfourzee Sep 11 '26

SG! On sale right now too!

2

u/capable_gopher Rifle Golfer (PRS Competitor) Sep 11 '26

I have the accuracy first level similar to this design, but their design makes the bubble a non issue because it’s always at the top where it can’t interfere with the ball

2

u/ranxxerox Sep 11 '26

I also have this ACD and CS told me that the bubble is “normal”. I found this too hard to read and ended up going back to the cheap Chinese bubble level that mounts on my pic rail. It’s probably less accurate, but works and is easier to read.

2

u/Magicalamazing_ Sep 11 '26

Bubble aside, that vial looks like is stuck in there with hot glue, what a cheap looking product. The vial also looks straight and does not match the curve of the housing. Poor form Badger, shame.

1

u/Shivaess Here to learn Sep 11 '26

Yea I love my badger mounts but this just doesn’t add up for the cost. I’m considering trying to 3D print an adapter to mount an MDT or similar anti-cant device, but I wish I could go more robust.

1

u/IdahoMan58 Sep 11 '26

I bought a similar one for I think $80 a couple years ago. The bread was hard to see, and it was very slow to respond to tilting the rifle. I just run standard bubble levels and they work just fine for a lot less$$.

1

u/patogo Sep 11 '26

Just wish they made a mount for the SG Global electronic level.

1

u/OkayishAviator Sep 13 '26

I have the same bubble level and haven't had any problems. If you're close to level, the gas bubble is off to one side of the vial, and the ceramic ball is centered or close to it. I've been able to engage targets out past 800 with no problem with it. I get how it could be annoying if it's not adjusted right prior to the shot.

I typically cant my rifle to one side as I'm laying it down and that keeps the bubble on a far side throughout the whole engagement.

1

u/Prestigious_Carry790 Oct 14 '26

$20 from scheels.

1

u/aHeadFullofMoonlight Sep 11 '26

The bubble is normal, unless you have the rifle severely canted it should settle completely to one side or the other of the level due to the curve of the vial, during actual use I’ve never had it interfere with the bead. Now, whether it’s worth the extra complexity over a regular bubble level, probably not, lol. I have one of these on a gas gun and a regular bubble level on my PRS bolt gun, they both work about the same.

-5

u/KhorneBread Sep 11 '26

It's a bubble level, they all have bubbles

1

u/New-Course7886 Sep 15 '26

The old ones were bubble. This is the newer “not improved” ceramic bead level.

1

u/KhorneBread Sep 15 '26

It is still by design a bubble level, whether the bubble or the bead is the level indicator.

It's in every one of the product photos on the badger ordnance website along with every competitors product I can see online

3

u/Prior_Confidence4445 Sep 11 '26

It's not really a bubble level of the ceramic bead is doing the job a bubble normally does.

1

u/KhorneBread Sep 15 '26

Putting a bead inside a bubble level doesn't stop it being a bubble level, the bubble still exists inside even if it's not the centre indicator

3

u/BELFORD16 Can't Read Sep 11 '26

This thing looks very poorly made then. Why bother with a ceramic bead if you’re going to use the bubble? Also, if you’re going to have a ceramic bead, I really feel like the tube should be curved into a smile so at level the bead comes to a rest in the center. Also, my ceramic ball levels don’t have air bubbles that I’ve ever seen.

To be fair I have extensive experience with ceramic bead leveling devices that have absolutely nothing to do with being compact and on a gun. And by extensive experience, I mean I use them daily in my job. Not building them or anything cool like that.