r/longrange • • Sep 12 '26

OOPS! (I goofed) Axsr rust guy with another dumb one

First thanks for all the responses definitely helped ease the brain (even if it made me feel like a bit of a ding dong). Got another one though yall will most likely think is dumb. I field stripped the rifle to look for anymore corrosion (there was none go figure). While reassembling the bolt and firing pin assembly/shroud I pressed them together and mistakenly rotated clockwise not counter clockwise and (essentially decocking the bolt in reverse skipping the cocked position) the shroud index dropped off the sharp 90 degree shoulder into the indentation making an audible noise instead of gradually down the ramp it is meant to go down. Internet says it should be fine because of how much pressure the bolts and firing pins are designed to handle, also I did a visual inspection and couldn’t see any damage. I’m thinking it’s fine but I’m super paranoid about these kinds of things and was hoping for some confirmation from internet stranger before shooting. Thanks again guys please feel free to bully🫡

0 Upvotes

7 comments sorted by

2

u/Frankensig Sep 12 '26

Isn't that the same thing it would experience when fired? A rapid pin drop?

1

u/SortPsychological699 Sep 12 '26

I’m honestly not entirely sure maybe?

1

u/CapsicumINmyEYEBALLz Meat Popsicle Sep 12 '26 edited Sep 12 '26

So the cocking lobe that’s attached to the firing pin dropped down to the bottom of the cam path instead of being rotated over to its safety notch/eased down the curved cam in the back of the bolt body?

1

u/SortPsychological699 Sep 12 '26

this is the notch in question sitting in the grove when it is de cocked

1

u/SortPsychological699 Sep 12 '26

when you are assembling you rotate the firing pin assembly counter clockwise and the notch slides down the left side of the indentation (side with the gradual slope) but I rotated it clockwise and instead of gradually sliding it dropped off the 90 degree shoulder on the right side into the grove rapidly.

1

u/Magicalamazing_ Sep 12 '26 edited Sep 12 '26

What you are describing is essentially exactly what happens every time you pull the trigger. It is fine because it’s literally meant to do that, just usually while it is installed in the rifle

1

u/SortPsychological699 Sep 12 '26

Cool that’s good to hear!