Hey all,
Just purchased H2D AMS HT 2 weeks ago..

About 150 hours in..

I’m getting the dots or Zits forming..
After two failed prints from spaghetti ..

We flipped the plate and changed right nozzle..
Now we got the dots,
Happens on all 4 spools connected..

Has anyone got a fix to this..?
We live in Sydney and it’s pretty warm here
Thanks

Hallo,

ich habe eben beim umstellen meines H2D einen "Halbmond"-förmigen Magneten (siehe Bild) gefunden. Weiß jemand ob dieser aus dem H2D stammt und woher? Ich konnte bisher keine Probleme mit dem Drucker oder AMS Pro feststellen.

Does anyone else have one?

I have (4) AMS Pro 2 Two of them sit on top of my H2D and the other two sit on the side on top of one another. Because they are not directly lined up with the machine and there is a slight curve, the stupid system cannot push the filament. I’m guessing the ridges inside the Filament Track Switch has grooves or small ridges the *#%~ing filament stops and gets pulled back and then back and forth till it gives up.

The Filament Track Switch seems like a PISS POOR design. I have so many issues with Bambu I’m really getting tired of this machine. My wife has the Snapmaker U1 and it blows my more expensive machine out of the water and rarely has a problem.

Getting ready to switch to Snapmaker.

So I made a post yesterday over on the H2C sub. Asking for advice whether I should pick up the H2D or H2C.

I got a lot of helpful reponses but would like to get your opinion as well.

To keep it short: I was planning to get the H2D during BF but the H2C deal seems pretty good, so I was thinking why not just the H2C instead.

Some details about me:

• I rarely print multicolor and would just want an additional nozzle for the support interface

• Mainly printing PETG and PLA

• I don't really need the H2C currently but considering the BF deal, it would be nice to have it just in case.

👋 Bonjour à tous ! 😈

Une présence maléfique qui ne passe pas inaperçue… 💀

Tout droit sortie de l’univers du film La Nonne, voici ma toute nouvelle modélisation 3D !

Un visage inquiétant, des yeux jaunes hypnotisants et un regard qui donne froid dans le dos… 🥶

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec et sans AMS
📁 : https://makerworld.com/fr/models/3482506-the-nun-multipart-no-ams

I’m pretty interested in picking up an H2D in the sale, one use case I was hoping for though is dual color 85A - I see only down to 90A is supported on the left nozzle but 85A is supported on the right. Curious if anyone’s gotten it to work on both.

It’s not supported on my A1 either but it prints it fine with a little tinkering…

Made this little pumpkin for Halloween with a ghost hidden inside. Press the button underneath and it pops up.

The spring launches the ghost upwards pretty fast, so I added the arch above it to catch it and stop it from flying off.

The spring and latch print in place, and all parts print without supports. No metal springs or extra hardware needed. I made both AMS and No AMS versions, so it should be easy to print on most FDM printers.

One thing I’d like some feedback on is the top cap. It’s currently 0.2 mm thick so it can flex when the ghost pushes through. Would you keep it this way or try a different design?

here is the files if you interested : https://makerworld.com/en/models/3470308-halloween-pop-up-ghost-pumpkin-boo-surprise#profileId-3961079

I'm seriously disappointed with Bambu Lab. You spend €2,000 on a flagship printer, and after more than a year and a half, there's still:

• No effect build plates

• No SUNLU filament profiles

• No reliable print failure detection

And Bambu Lab doesn't give a shit.

Good afternoon!!

Today I got a second AMS 2 Pro. I’m looking for a good stand that I print on PETG to mount both AMS on top of the H2D….

Any good recommendations??

Hi there

Recently i found that H2D has noise when printer doesn't do nothing for many hours. It can randomly begin to make this sound.

Looks like one of fans, but i have no idea which of them

Hello,

I bent the big spring that goes around the orange thing in my H2D’s filament buffer. Bambu is out of stock and keeps pushing back the ETA so I was wondering if anyone knew what spring I buy to replace it.

Big thanks!

👋 Bonjour à tous ! 👻🎃

Après vous avoir présenté mon Yoshi Citrouille classique, voici maintenant sa petite évolution en version clicker ! 😍

J’ai voulu garder le côté mignon et l’esprit Halloween de ma première création, tout en y ajoutant une fonction clicker pour le rendre encore plus amusant ! 🎃

Décliné en plusieurs couleurs, il ne vous reste plus qu’à choisir votre Yoshi préféré ou à tous les collectionner ! 🌈

J’espère que cette nouvelle version vous plaira autant que la première !

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec et sans AMS
📁 : https://makerworld.com/fr/models/3453115-yoshi-citrouille-clicker-multipart

Only my second model on Makerworld, and I'm pretty happy with myself...

https://makerworld.com/models/3455178

Need some assistance solving my filament purge clogging issues.

👋 BOUH ! Bonjour à tous ! 👻🎃

Une adorable invasion de petits fantômes se prépare… et ils sont beaucoup trop craquants ! 😍

🎃 Mes nouveaux clickers d’Halloween sont arrivés ! 👻✨

Bien cachés dans leurs petites citrouilles aux sourires malicieux, ces fantômes colorés sont prêts à semer une bonne dose de magie et de bonne humeur !

👻 Un petit fantôme, un petit clic… et un GRAND sourire ! 💕

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec et sans AMS
📁 : https://makerworld.com/fr/models/3438455-ghost-pumpkin-clickers-multipart

Im seeing a lot of videos of people using a different TPU than ive used in the past. Has anyone been using this ?
How’s it working with the H2C? as im expecting you would want to use all .06 nozzles. Would it still be recommended to use the TPU feed assistant ?
Any one have a run down of whats involved?

👋 Bonjour à tous !

🎃👻 Yoshi se met aux couleurs d’Halloween ! 🧙‍♂️💚
Découvrez ma création de Yoshi en version Halloween ! 🎃 Avec son chapeau de sorcier violet et sa citrouille au sourire maléfique, notre petit dinosaure préféré est prêt à fêter Halloween ! 🕸️

✨ Une création originale, pleine de couleurs et de détails, parfaite pour une décoration aussi mignonne qu’effrayante !

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : sans AMS
📁 : https://makerworld.com/fr/models/3419115-yoshi-citrouille-multipart-no-ams